ADD, ADDS (SP plus register) -- AArch32

ADD, ADDS (SP plus register)

Add to SP (register) adds an optionally-shifted register value to the SP value, and writes the result to the destination register.

If the destination register is not the PC, the ADDS variant of the instruction updates the condition flags based on the result.

The field descriptions for <Rd> identify the encodings where the PC is permitted as the destination register. Arm deprecates any use of these encodings. However, when the destination register is the PC:

The ADD variant of the instruction is an interworking branch, see Pseudocode description of operations on the AArch32 general-purpose registers and the PC.
The ADDS variant of the instruction performs an exception return without the use of the stack. In this case:
- The PE branches to the address written to the PC, and restores PSTATE from SPSR_<current_mode>.
- The PE checks SPSR_<current_mode> for an illegal return event. See Illegal return events from AArch32 state.
- The instruction is undefined in Hyp mode.
- The instruction is constrained unpredictable in User mode and System mode.

It has encodings from the following instruction sets: A32 ( A1 ) and T32 ( T1 , T2 and T3 ) .

A1

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
!= 1111				0	0	0	0	1	0	0	S	1	1	0	1	Rd				imm5					stype		0	Rm
cond

constant d = UInt(Rd); constant m = UInt(Rm); constant setflags = (S == '1'); constant (shift_t, shift_n) = DecodeImmShift(stype, imm5);

T1

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0	1	0	0	0	1	0	0	DM	1	1	0	1	Rdm

T1

ADD{<c>}{<q>} {<Rdm>,} SP, <Rdm>

constant d = UInt(DM:Rdm); constant m = UInt(DM:Rdm); constant setflags = FALSE; constant (shift_t, shift_n) = (SRType_LSL, 0); if d == 15 && InITBlock() && !LastInITBlock() then UNPREDICTABLE;

T2

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0	1	0	0	0	1	0	0	1	!= 1101				1	0	1
									Rm

T2

ADD{<c>}{<q>} {SP,} SP, <Rm>

if Rm == '1101' then SEE "encoding T1"; constant d = 13; constant m = UInt(Rm); constant setflags = FALSE; constant (shift_t, shift_n) = (SRType_LSL, 0);

T3

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
1	1	1	0	1	0	1	1	0	0	0	S	1	1	0	1	(0)	imm3			Rd				imm2		stype		Rm

ADD, rotate right with extend (S == 0 && imm3 == 000 && imm2 == 00 && stype == 11)

ADD{<c>}{<q>} {<Rd>,} SP, <Rm>, RRX

ADD, shift or rotate by value (S == 0 && !(imm3 == 000 && imm2 == 00 && stype == 11))

ADD{<c>}.W {<Rd>,} SP, <Rm> // (<Rd>, <Rm> can be represented in T1 or T2)

ADD{<c>}{<q>} {<Rd>,} SP, <Rm> {, <shift> #<amount>}

ADDS, rotate right with extend (S == 1 && imm3 == 000 && Rd != 1111 && imm2 == 00 && stype == 11)

ADDS{<c>}{<q>} {<Rd>,} SP, <Rm>, RRX

ADDS, shift or rotate by value (S == 1 && !(imm3 == 000 && imm2 == 00 && stype == 11) && Rd != 1111)

ADDS{<c>}{<q>} {<Rd>,} SP, <Rm> {, <shift> #<amount>}

if Rd == '1111' && S == '1' then SEE "CMN (register)"; constant d = UInt(Rd); constant m = UInt(Rm); constant setflags = (S == '1'); constant (shift_t, shift_n) = DecodeImmShift(stype, imm3:imm2); // Armv8-A removes UNPREDICTABLE for R13 if (d == 15 && !setflags) || m == 15 then UNPREDICTABLE;

For more information about the constrained unpredictable behavior, see Architectural Constraints on UNPREDICTABLE behaviors.

Assembler Symbols

<c>	See Standard assembler syntax fields.

<q>	See Standard assembler syntax fields.

SP,	Is the stack pointer.

<Rdm>

Is the general-purpose destination and second source register, encoded in the "Rdm" field. If omitted, this register is the SP. Arm deprecates using the PC as the destination register, but if the PC is used, the instruction is a branch to the address calculated by the operation. This is a simple branch, see Pseudocode description of operations on the AArch32 general-purpose registers and the PC.

<Rd>

For encoding A1: is the general-purpose destination register, encoded in the "Rd" field. If omitted, this register is the SP. Arm deprecates using the PC as the destination register, but if the PC is used:

For the ADD variant, the instruction is a branch to the address calculated by the operation. This is an interworking branch, see Pseudocode description of operations on the AArch32 general-purpose registers and the PC.
For the ADDS variant, the instruction performs an exception return, that restores PSTATE from SPSR_<current_mode>.

For encoding T3: is the general-purpose destination register, encoded in the "Rd" field. If omitted, this register is the SP.

<Rm>	For encoding A1 and T2: is the second general-purpose source register, encoded in the "Rm" field. The PC can be used, but this is deprecated.
	For encoding T3: is the second general-purpose source register, encoded in the "Rm" field.

<shift>

Is the type of shift to be applied to the second source register, encoded in stype:

stype	<shift>
00	LSL
01	LSR
10	ASR
11	ROR

<amount>	For encoding A1: is the shift amount, in the range 1 to 31 (when <shift> = LSL or ROR) or 1 to 32 (when <shift> = LSR or ASR) encoded in the "imm5" field as <amount> modulo 32.
	For encoding T3: is the shift amount, in the range 1 to 31 (when <shift> = LSL or ROR) or 1 to 32 (when <shift> = LSR or ASR), encoded in the "imm3:imm2" field as <amount> modulo 32.

Operation

if ConditionPassed() then EncodingSpecificOperations(); constant shifted = Shift(R[m], shift_t, shift_n, PSTATE.C); constant (result, nzcv) = AddWithCarry(R[13], shifted, '0'); if d == 15 then if setflags then ALUExceptionReturn(result); else ALUWritePC(result); else R[d] = result; if setflags then PSTATE.<N,Z,C,V> = nzcv;

Internal version only: isa v01_31, pseudocode v2024-03_rel ; Build timestamp: 2024-03-25T10:05