ROR (immediate)

Rotate Right (immediate) provides the value of the contents of a register rotated by a constant value. The bits that are rotated off the right end are inserted into the vacated bit positions on the left.

This is an alias of MOV, MOVS (register). This means:

It has encodings from the following instruction sets: A32 ( A1 ) and T32 ( T3 ) .

A1

313029282726252423222120191817161514131211109876543210
!= 111100011010(0)(0)(0)(0)Rd!= 00000110Rm
condSimm5stype

MOV, shift or rotate by value

ROR{<c>}{<q>} {<Rd>,} <Rm>, #<imm>

is equivalent to

MOV{<c>}{<q>} <Rd>, <Rm>, ROR #<imm>

and is always the preferred disassembly.

T3

15141312111098765432101514131211109876543210
1110101001001111(0)imm3Rdimm211Rm
Sstype

MOV, shift or rotate by value (!(imm3 == 000 && imm2 == 00))

ROR{<c>}{<q>} {<Rd>,} <Rm>, #<imm>

is equivalent to

MOV{<c>}{<q>} <Rd>, <Rm>, ROR #<imm>

and is always the preferred disassembly.

Assembler Symbols

<c>

See Standard assembler syntax fields.

<q>

See Standard assembler syntax fields.

<Rd>

For encoding A1: is the general-purpose destination register, encoded in the "Rd" field. Arm deprecates using the PC as the destination register, but if the PC is used, the instruction is a branch to the address calculated by the operation. This is an interworking branch, see Pseudocode description of operations on the AArch32 general-purpose registers and the PC.

For encoding T3: is the general-purpose destination register, encoded in the "Rd" field.

<Rm>

For encoding A1: is the general-purpose source register, encoded in the "Rm" field. The PC can be used, but this is deprecated.

For encoding T3: is the general-purpose source register, encoded in the "Rm" field.

<imm>

For encoding A1: is the shift amount, in the range 1 to 31, encoded in the "imm5" field.

For encoding T3: is the shift amount, in the range 1 to 31, encoded in the "imm3:imm2" field.

Operation

The description of MOV, MOVS (register) gives the operational pseudocode for this instruction.


Internal version only: isa v01_31, pseudocode v2024-03_rel ; Build timestamp: 2024-03-25T10:05

Copyright © 2010-2024 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.