UXTAB16

Unsigned Extend and Add Byte 16 extracts two 8-bit values from a register, zero-extends them to 16 bits each, adds the results to two 16-bit values from another register, and writes the final results to the destination register. The instruction can specify a rotation by 0, 8, 16, or 24 bits before extracting the 8-bit values.

It has encodings from the following instruction sets: A32 ( A1 ) and T32 ( T1 ) .

A1

313029282726252423222120191817161514131211109876543210
!= 111101101100!= 1111Rdrotate(0)(0)0111Rm
condRn

A1

UXTAB16{<c>}{<q>} {<Rd>,} <Rn>, <Rm> {, ROR #<amount>}

if Rn == '1111' then SEE "UXTB16"; constant d = UInt(Rd); constant n = UInt(Rn); constant m = UInt(Rm); constant rotation = UInt(rotate:'000'); if d == 15 || m == 15 then UNPREDICTABLE;

T1

15141312111098765432101514131211109876543210
111110100011!= 11111111Rd1(0)rotateRm
Rn

T1

UXTAB16{<c>}{<q>} {<Rd>,} <Rn>, <Rm> {, ROR #<amount>}

if Rn == '1111' then SEE "UXTB16"; constant d = UInt(Rd); constant n = UInt(Rn); constant m = UInt(Rm); constant rotation = UInt(rotate:'000'); // Armv8-A removes UNPREDICTABLE for R13 if d == 15 || m == 15 then UNPREDICTABLE;

For more information about the constrained unpredictable behavior of this instruction, see Architectural Constraints on UNPREDICTABLE behaviors.

Assembler Symbols

<c>

See Standard assembler syntax fields.

<q>

See Standard assembler syntax fields.

<Rd>

Is the general-purpose destination register, encoded in the "Rd" field.

<Rn>

Is the first general-purpose source register, encoded in the "Rn" field.

<Rm>

Is the second general-purpose source register, encoded in the "Rm" field.

<amount>

Is the rotate amount, encoded in rotate:

rotate <amount>
00 (omitted)
01 8
10 16
11 24

Operation

if ConditionPassed() then EncodingSpecificOperations(); constant rotated = ROR(R[m], rotation); R[d]<15:0> = R[n]<15:0> + ZeroExtend(rotated<7:0>, 16); R[d]<31:16> = R[n]<31:16> + ZeroExtend(rotated<23:16>, 16);

Operational information

If CPSR.DIT is 1, this instruction has passed its condition execution check, and does not use R15 as either its source or destination:


Internal version only: isa v01_31, pseudocode v2024-03_rel ; Build timestamp: 2024-03-25T10:05

Copyright © 2010-2024 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.