The PMAUTHSTATUS characteristics are:
Provides information about the state of the IMPLEMENTATION DEFINED authentication interface for Performance Monitors.
This register is present only when FEAT_PMUv3_EXT is implemented. Otherwise, direct accesses to PMAUTHSTATUS are RES0.
If FEAT_DoPD is implemented, this register is in the Core power domain. If FEAT_DoPD is not implemented, this register is in the Debug power domain.
This register is OPTIONAL, and is required for CoreSight compliance. Arm recommends that this register is implemented.
PMAUTHSTATUS is a 32-bit register.
This register is part of the PMU block.
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
RES0 | RTNID | RTID | RES0 | RLNID | RLID | RES0 | SNID | SID | NSNID | NSID |
Reserved, RES0.
Root non-invasive debug.
This field has the same value as DBGAUTHSTATUS_EL1.RTNID.
Root invasive debug.
RTID | Meaning |
---|---|
0b00 |
Not implemented. |
Reserved, RES0.
Realm non-invasive debug.
This field has the same value as DBGAUTHSTATUS_EL1.RLNID.
Realm invasive debug.
RLID | Meaning |
---|---|
0b00 |
Not implemented. |
Reserved, RES0.
Holds the same value as DBGAUTHSTATUS_EL1.SNID.
Secure invasive debug. Possible values of this field are:
SID | Meaning |
---|---|
0b00 |
Not implemented. |
All other values are reserved.
Holds the same value as DBGAUTHSTATUS_EL1.NSNID.
Non-secure invasive debug. Possible values of this field are:
NSID | Meaning |
---|---|
0b00 |
Not implemented. |
All other values are reserved.
Accesses to this register use the following encodings:
04/07/2023 11:24; 1b994cb0b8c6d1ae5a9a15edbc8bd6ce3b5c7d68
Copyright © 2010-2023 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.