The PMITCTRL characteristics are:
Enables the Performance Monitors to switch from default mode into integration mode, where test software can control directly the inputs and outputs of the PE, for integration testing or topology detection.
This register is present only when FEAT_PMUv3_EXT32 is implemented and an implementation implements PMITCTRL. Otherwise, direct accesses to PMITCTRL are RES0.
PMITCTRL is a 32-bit register.
This register is part of the PMU block.
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| RES0 | IME | ||||||||||||||||||||||||||||||
Reserved, RES0.
Integration mode enable. When IME == 1, the device reverts to an integration mode to enable integration testing or topology detection. The integration mode behavior is IMPLEMENTATION DEFINED.
| IME | Meaning |
|---|---|
| 0b0 |
Normal operation. |
| 0b1 |
Integration mode enabled. |
The following resets apply:
If the register is implemented in the Core power domain:
On a Cold reset, this field resets to 0.
On an External debug reset, the value of this field is unchanged.
On a Warm reset, the value of this field is unchanged.
If the register is implemented in the External debug power domain:
On a Cold reset, the value of this field is unchanged.
On an External debug reset, this field resets to 0.
On a Warm reset, the value of this field is unchanged.
Accesses to this register use the following encodings:
04/07/2023 11:24; 1b994cb0b8c6d1ae5a9a15edbc8bd6ce3b5c7d68
Copyright © 2010-2023 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.