PMPIDR4, Performance Monitors Peripheral Identification Register 4

The PMPIDR4 characteristics are:

Purpose

Provides information to identify a Performance Monitor component.

For more information, see 'About the Peripheral identification scheme'.

Configuration

This register is present only when FEAT_PMUv3_EXT is implemented and an implementation implements PMPIDR4. Otherwise, direct accesses to PMPIDR4 are RES0.

If FEAT_DoPD is implemented, this register is in the Core power domain. If FEAT_DoPD is not implemented, this register is in the Debug power domain.

This register is required for CoreSight compliance.

Attributes

PMPIDR4 is a 32-bit register.

This register is part of the PMU block.

Field descriptions

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RES0																								SIZE				DES_2

Bits [31:8]

Reserved, RES0.

SIZE, bits [7:4]

Size of the component. Log₂ of the number of 4KB pages from the start of the component to the end of the component ID registers.

Reads as 0b0000.

Access to this field is RO.

DES_2, bits [3:0]

Designer, JEP106 continuation code, least significant nibble. For Arm Limited, this field is 0b0100.

This field has an IMPLEMENTATION DEFINED value.

Access to this field is RO.

Accessing PMPIDR4

Accesses to this register use the following encodings:

Accessible at offset 0xFD0 from PMU

When FEAT_DoPD is implemented and !IsCorePowered(), accesses to this register generate an error response.
Otherwise, accesses to this register are RO.

04/07/2023 11:24; 1b994cb0b8c6d1ae5a9a15edbc8bd6ce3b5c7d68