The RMR_EL3 characteristics are:
If EL3 is implemented and this register is implemented:
AArch64 System register RMR_EL3 bits [31:0] are architecturally mapped to AArch32 System register RMR[31:0] when EL3 is implemented.
This register is present only when EL3 is implemented. Otherwise, direct accesses to RMR_EL3 are UNDEFINED.
When EL3 is implemented:
Otherwise, direct accesses to RMR_EL3 are UNDEFINED.
RMR_EL3 is a 64-bit register.
63 | 62 | 61 | 60 | 59 | 58 | 57 | 56 | 55 | 54 | 53 | 52 | 51 | 50 | 49 | 48 | 47 | 46 | 45 | 44 | 43 | 42 | 41 | 40 | 39 | 38 | 37 | 36 | 35 | 34 | 33 | 32 |
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
RES0 | |||||||||||||||||||||||||||||||
RES0 | RR | AA64 |
Reserved, RES0.
Reset Request. Setting this bit to 1 requests a Warm reset.
The reset behavior of this field is:
When EL3 can use AArch32, determines which Execution state the PE boots into after a Warm reset:
AA64 | Meaning |
---|---|
0b0 |
AArch32. |
0b1 |
AArch64. |
On coming out of the Warm reset, execution starts at the IMPLEMENTATION DEFINED reset vector address of the specified Execution state.
If EL3 can only use AArch64 state, this bit is RAO/WI.
When implemented as a RW field, this field resets to 1 on a Cold reset.
Reserved, RAO/WI.
Accesses to this register use the following encodings in the System register encoding space:
op0 | op1 | CRn | CRm | op2 |
---|---|---|---|---|
0b11 | 0b110 | 0b1100 | 0b0000 | 0b010 |
if PSTATE.EL == EL3 && IsHighestEL(EL3) then X[t, 64] = RMR_EL3; else UNDEFINED;
op0 | op1 | CRn | CRm | op2 |
---|---|---|---|---|
0b11 | 0b110 | 0b1100 | 0b0000 | 0b010 |
if PSTATE.EL == EL3 && IsHighestEL(EL3) then RMR_EL3 = X[t, 64]; else UNDEFINED;
15/03/2024 21:49; 3156453dc257d36c4630671c3d896bfc69048210
Copyright © 2010-2023 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.