TRCITEEDCR

This register is present only when FEAT_ETE is implemented, FEAT_TRC_EXT is implemented and TRCIDR0.ITE == 1. Otherwise, direct accesses to TRCITEEDCR are RES0.

Attributes

Field descriptions

Bits [31:7]

RL, bit [6]
When FEAT_RME is implemented:

Instrumentation Trace in Realm state.

RL	Meaning
0b0	Instrumentation trace prohibited in Realm state.
0b1	Instrumentation trace permitted in Realm state.

This field is ignored when SelfHostedTraceEnabled() returns TRUE.

This field is used in conjunction with TRCCONFIGR.ITO and TRCITEEDCR.E<m> to control whether Instrumentation trace is permitted or prohibited in Realm state.

The reset behavior of this field is:

On a Trace unit reset, this field resets to an architecturally UNKNOWN value.

Otherwise:

S, bit [5]
When Secure state is implemented:

Instrumentation Trace in Secure state.

S	Meaning
0b0	Instrumentation trace prohibited in Secure state.
0b1	Instrumentation trace permitted in Secure state.

This field is ignored when SelfHostedTraceEnabled() returns TRUE.

When FEAT_RME is not implemented, this field is used in conjunction with TRCCONFIGR.ITO, TRCITEEDCR.E3, and TRCITEEDCR.E<m> to control whether Instrumentation trace is permitted or prohibited in Secure state.

When FEAT_RME is implemented, this field is used in conjunction with TRCCONFIGR.ITO and TRCITEEDCR.E<m> to control whether Instrumentation trace is permitted or prohibited in Secure state.

The reset behavior of this field is:

On a Trace unit reset, this field resets to an architecturally UNKNOWN value.

Otherwise:

NS, bit [4]
When Non-secure state is implemented:

Instrumentation Trace in Non-secure state.

NS	Meaning
0b0	Instrumentation trace prohibited in Non-secure state.
0b1	Instrumentation trace permitted in Non-secure state.

This field is ignored when SelfHostedTraceEnabled() returns TRUE.

This field is used in conjunction with TRCCONFIGR.ITO and TRCITEEDCR.E<m> to control whether Instrumentation trace is permitted or prohibited in Non-secure state.

The reset behavior of this field is:

On a Trace unit reset, this field resets to an architecturally UNKNOWN value.

Otherwise:

E3, bit [3]
When EL3 is implemented:

Instrumentation Trace Enable at EL3.

E3	Meaning
0b0	Instrumentation trace prohibited at EL3.
0b1	Instrumentation trace permitted at EL3.

This field is ignored when SelfHostedTraceEnabled() returns TRUE.

When FEAT_RME is not implemented, TRCITEEDCR.E3 is used in conjunction with TRCCONFIGR.ITO and TRCITEEDCR.S to control whether Instrumentation trace is permitted or prohibited at EL3.

When FEAT_RME is implemented, TRCITEEDCR.E3 is used in conjunction with TRCCONFIGR.ITO to control whether Instrumentation trace is permitted or prohibited at EL3.

The reset behavior of this field is:

On a Trace unit reset, this field resets to an architecturally UNKNOWN value.

Otherwise:

E<m>, bit [m], for m = 2 to 0

Instrumentation Trace Enable at EL<m>.

E<m>	Meaning
0b0	Instrumentation trace prohibited at EL<m>.
0b1	Instrumentation trace permitted at EL<m>.

This field is ignored when SelfHostedTraceEnabled() returns TRUE.

This bit is used in conjunction with TRCCONFIGR.ITO, TRCITEEDCR.NS, TRCITEEDCR.S, and TRCITEEDCR.RL to control whether Instrumentation trace is permitted or prohibited at EL<m> in the specified Security states.

TRCITEEDCR.E<2> is RES0 if EL2 is not implemented in any Security states.

The reset behavior of this field is:

On a Trace unit reset, this field resets to an architecturally UNKNOWN value.

Accessing TRCITEEDCR

Writes are CONSTRAINED UNPREDICTABLE if the trace unit is not in the Idle state.

TRCITEEDCR can be accessed through the external debug interface:

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RES0																									RL	S	NS	E3	E2	E1	E0

TRCITEEDCR, Instrumentation Trace Extension External Debug Control Register

Purpose

Configuration

Attributes

Field descriptions

Bits [31:7]

RL, bit [6]
When FEAT_RME is implemented:

Otherwise:

S, bit [5]
When Secure state is implemented:

Otherwise:

NS, bit [4]
When Non-secure state is implemented:

Otherwise:

E3, bit [3]
When EL3 is implemented:

Otherwise:

E<m>, bit [m], for m = 2 to 0

Accessing TRCITEEDCR

TRCITEEDCR can be accessed through the external debug interface:

TRCITEEDCR, Instrumentation Trace Extension External Debug Control Register

Purpose

Configuration

Attributes

Field descriptions

Bits [31:7]

RL, bit [6]When FEAT_RME is implemented:

Otherwise:

S, bit [5]When Secure state is implemented:

Otherwise:

NS, bit [4]When Non-secure state is implemented:

Otherwise:

E3, bit [3]When EL3 is implemented:

Otherwise:

E<m>, bit [m], for m = 2 to 0

Accessing TRCITEEDCR

TRCITEEDCR can be accessed through the external debug interface:

RL, bit [6]
When FEAT_RME is implemented:

S, bit [5]
When Secure state is implemented:

NS, bit [4]
When Non-secure state is implemented:

E3, bit [3]
When EL3 is implemented: