Lines Matching refs:drives
50 adapted their drives to one or more of the already existing electrical
57 drives are either IDE/ATAPI or SCSI, and it is very unlikely that any
58 manufacturer will create a new interface. Even finding drives for the
71 ejection. Undoubtedly, the capabilities of the different drives vary,
72 but even when two drives have the same capability their drivers'
93 Driver is simply to give people writing application programs for CD-ROM drives
103 the IDE/ATAPI drives and, of course, the SCSI drives, but as prices
106 that these drives behave in the same way. In December 1994, one of the
107 cheapest CD-ROM drives was a Philips cm206, a double-speed proprietary
109 proprietary drives became obsolete and IDE/ATAPI drives became the
112 16 speed CD-ROM drive, and 24 speed drives are common.
137 CD-ROM drives are specific enough (i. e., different from other
138 block-devices such as floppy or hard disc drives), to define a set
176 capabilities of the driver, and the specific drives on which the
205 the capabilities of future CD-ROM drives, so it is expected that this
207 developed. For example, CD-R and CD-R/W drives are beginning to become
402 Some CD-ROM drives are capable of changing their head-speed. There
405 CD-ROM drives can obtain very high head rates (up to *24x* is
406 common). It has been reported that these drives can make reading
408 in these circumstances. Finally, some of these drives can
505 Some *ioctl()'s* seem to be specific to certain CD-ROM drives. That is,
506 they are introduced to service some capabilities of certain drives. In
508 particular kind of format, or audio data. Not many drives support
582 drives, in order to satisfy different users' wishes, hopefully
615 call. The problem with CD-ROM drives, is that they can be used for