Lines Matching refs:smc
47 - atmel,smc-bus-width: width of the asynchronous device's data bus
51 - atmel,smc-byte-access-type "write" or "select" (see Atmel datasheet).
54 - atmel,smc-read-mode "nrd" or "ncs".
57 - atmel,smc-write-mode "nwe" or "ncs".
60 - atmel,smc-exnw-mode "disabled", "frozen" or "ready".
63 - atmel,smc-page-mode enable page mode if present. The provided value
67 - atmel,smc-tdf-mode: "normal" or "optimized". When set to
74 If at least one atmel,smc- property is defined the following SMC timing
75 properties become mandatory. In the other hand, if none of the atmel,smc-
83 - atmel,smc-ncs-rd-setup-ns
84 - atmel,smc-nrd-setup-ns
85 - atmel,smc-ncs-wr-setup-ns
86 - atmel,smc-nwe-setup-ns
87 - atmel,smc-ncs-rd-pulse-ns
88 - atmel,smc-nrd-pulse-ns
89 - atmel,smc-ncs-wr-pulse-ns
90 - atmel,smc-nwe-pulse-ns
91 - atmel,smc-nwe-cycle-ns
92 - atmel,smc-nrd-cycle-ns
93 - atmel,smc-tdf-ns
101 atmel,smc = <&hsmc>;
121 atmel,smc-read-mode = "nrd";
122 atmel,smc-write-mode = "nwe";
123 atmel,smc-bus-width = <16>;
124 atmel,smc-ncs-rd-setup-ns = <0>;
125 atmel,smc-ncs-wr-setup-ns = <0>;
126 atmel,smc-nwe-setup-ns = <8>;
127 atmel,smc-nrd-setup-ns = <16>;
128 atmel,smc-ncs-rd-pulse-ns = <84>;
129 atmel,smc-ncs-wr-pulse-ns = <84>;
130 atmel,smc-nrd-pulse-ns = <76>;
131 atmel,smc-nwe-pulse-ns = <76>;
132 atmel,smc-nrd-cycle-ns = <107>;
133 atmel,smc-nwe-cycle-ns = <84>;
134 atmel,smc-tdf-ns = <16>;