Lines Matching refs:be

37     description: boolean, regulator should never be disabled
45       This property is intended to only be used for regulators where
54     description: allow the regulator performance level to be configured
59       disabling ramp rate, it should be explicitly initialised to zero (regulator-ramp-delay
101       for the regulator at run-time.  Elements may be specified in any order.
122       hardware performs emergency shutdown. Zero can be passed to disable
123       protection and value '1' indicates that protection should be enabled but
124       limit setting can be omitted.
129       Zero can be passed to disable error detection and value '1' indicates
130       that detection should be enabled but limit setting can be omitted.
134       is assumed still to be functional but approaching limit where it gets
135       damaged. Recovery actions should be initiated. Zero can be passed to
137       be enabled but limit setting can be omitted.
141       hardware performs emergency shutdown. Zero can be passed to disable
142       protection and value '1' indicates that protection should be enabled but
143       limit setting can be omitted. Limit is given as microvolt offset from
149       Zero can be passed to disable error detection and value '1' indicates
150       that detection should be enabled but limit setting can be omitted. Limit
155       is assumed still to be functional but approaching limit where it gets
156       damaged. Recovery actions should be initiated. Zero can be passed to
158       be enabled but limit setting can be omitted. Limit is given as microvolt
163       hardware performs emergency shutdown. Zero can be passed to disable
164       protection and value '1' indicates that protection should be enabled but
165       limit setting can be omitted. Limit is given as microvolt offset from
171       Zero can be passed to disable error detection and value '1' indicates
172       that detection should be enabled but limit setting can be omitted. Limit
177       hardware is assumed still to be functional but approaching limit where
178       it gets damaged. Recovery actions should be initiated. Zero can be passed
180       be enabled but limit setting can be omitted. Limit is given as microvolt
185       hardware performs emergency shutdown. Zero can be passed to disable
186       protection and value '1' indicates that protection should be enabled but
187       limit setting can be omitted.
192       Zero can be passed to disable error detection and value '1' indicates
193       that detection should be enabled but limit setting can be omitted.
197       hardware is assumed still to be functional but approaching limit where it
198       gets damaged. Recovery actions should be initiated. Zero can be passed to
200       be enabled but limit setting can be omitted.
213       is 2-way - all coupled regulators should be linked with each other.
214       A regulator should not be coupled with its supplier.
225       that can be changed safely in a single step.
240         description: regulator should be on in suspend state.
244         description: regulator should be off in suspend state.
248         description: minimum voltage may be set in suspend state.
251         description: maximum voltage may be set in suspend state.
254         description: the default voltage which regulator would be set in
261           in suspend can be changed in runtime.