Lines Matching refs:fan
100 There are 4 to 5 fan rotation speed sensors, 8 to 15 analog voltage sensors,
102 fan regulation strategies (plus manual fan control mode).
115 NCT6775F, fan readings can be divided by a programmable divider (1, 2, 4, 8,
117 do not have a fan speed divider. The driver sets the most suitable fan divisor
118 itself; specifically, it increases the divider value each time a fan speed
119 reading returns an invalid value, and it reduces it if the fan speed reading
127 The driver supports automatic fan control mode known as Thermal Cruise.
129 predefined temperature range. If the temperature goes out of range, fan
138 - this file stores PWM duty cycle or DC value (fan speed) in range:
143 - this file controls mode of fan/temperature control:
158 Common fan control attributes
200 There are no changes to fan speed. Once the temperature leaves the interval, fan
206 fan pwm start value (range 1 - 255), to start fan
210 lowest fan pwm (range 0 - 255) if temperature is below
211 the defined range. If set to 0, the fan is expected to
215 milliseconds before fan speed is increased
218 milliseconds before fan speed is decreased
222 corresponding fan off (when the temperature was below
228 This modes tries to keep the fan speed constant.
230 fan[1-7]_target
231 Target fan speed
233 fan[1-7]_tolerance
242 This mode offers multiple slopes to control the fan speed. The slopes can be
247 higher fan speeds with increasing temperature. The last data point reflects
265 milliseconds before fan speed is increased
268 milliseconds before fan speed is decreased