Lines Matching refs:e_dbg
124 e_dbg("PHY Address %d is out of range\n", offset); in e1000e_read_phy_reg_mdic()
149 e_dbg("MDI Read did not complete\n"); in e1000e_read_phy_reg_mdic()
153 e_dbg("MDI Error\n"); in e1000e_read_phy_reg_mdic()
157 e_dbg("MDI Read offset error - requested %d, returned %d\n", in e1000e_read_phy_reg_mdic()
187 e_dbg("PHY Address %d is out of range\n", offset); in e1000e_write_phy_reg_mdic()
213 e_dbg("MDI Write did not complete\n"); in e1000e_write_phy_reg_mdic()
217 e_dbg("MDI Error\n"); in e1000e_write_phy_reg_mdic()
221 e_dbg("MDI Write offset error - requested %d, returned %d\n", in e1000e_write_phy_reg_mdic()
298 e_dbg("Setting page 0x%x\n", page); in e1000_set_page_igp()
740 e_dbg("Error committing the PHY changes\n"); in e1000e_copper_link_setup_m88()
796 e_dbg("Error committing the PHY changes\n"); in e1000e_copper_link_setup_m88()
832 e_dbg("Error resetting the PHY.\n"); in e1000e_copper_link_setup_igp()
845 e_dbg("Error Disabling LPLU D0\n"); in e1000e_copper_link_setup_igp()
954 e_dbg("autoneg_advertised %x\n", phy->autoneg_advertised); in e1000_phy_setup_autoneg()
958 e_dbg("Advertise 10mb Half duplex\n"); in e1000_phy_setup_autoneg()
964 e_dbg("Advertise 10mb Full duplex\n"); in e1000_phy_setup_autoneg()
970 e_dbg("Advertise 100mb Half duplex\n"); in e1000_phy_setup_autoneg()
976 e_dbg("Advertise 100mb Full duplex\n"); in e1000_phy_setup_autoneg()
982 e_dbg("Advertise 1000mb Half duplex request denied!\n"); in e1000_phy_setup_autoneg()
986 e_dbg("Advertise 1000mb Full duplex\n"); in e1000_phy_setup_autoneg()
1043 e_dbg("Flow control param set incorrectly\n"); in e1000_phy_setup_autoneg()
1051 e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); in e1000_phy_setup_autoneg()
1085 e_dbg("Reconfiguring auto-neg advertisement params\n"); in e1000_copper_link_autoneg()
1088 e_dbg("Error Setting up Auto-Negotiation\n"); in e1000_copper_link_autoneg()
1091 e_dbg("Restarting Auto-Neg\n"); in e1000_copper_link_autoneg()
1111 e_dbg("Error while waiting for autoneg to complete\n"); in e1000_copper_link_autoneg()
1146 e_dbg("Forcing Speed and Duplex\n"); in e1000e_setup_copper_link()
1149 e_dbg("Error Forcing Speed and Duplex\n"); in e1000e_setup_copper_link()
1163 e_dbg("Valid link established!!!\n"); in e1000e_setup_copper_link()
1167 e_dbg("Unable to establish link!!!\n"); in e1000e_setup_copper_link()
1212 e_dbg("IGP PSCR: %X\n", phy_data); in e1000e_phy_force_speed_duplex_igp()
1217 e_dbg("Waiting for forced speed/duplex link on IGP phy.\n"); in e1000e_phy_force_speed_duplex_igp()
1225 e_dbg("Link taking longer than expected.\n"); in e1000e_phy_force_speed_duplex_igp()
1264 e_dbg("M88E1000 PSCR: %X\n", phy_data); in e1000e_phy_force_speed_duplex_m88()
1284 e_dbg("Waiting for forced speed/duplex link on M88 phy.\n"); in e1000e_phy_force_speed_duplex_m88()
1293 e_dbg("Link taking longer than expected.\n"); in e1000e_phy_force_speed_duplex_m88()
1381 e_dbg("IFE PMC: %X\n", data); in e1000_phy_force_speed_duplex_ife()
1386 e_dbg("Waiting for forced speed/duplex link on IFE phy.\n"); in e1000_phy_force_speed_duplex_ife()
1394 e_dbg("Link taking longer than expected.\n"); in e1000_phy_force_speed_duplex_ife()
1441 e_dbg("Half Duplex\n"); in e1000e_phy_force_speed_duplex_setup()
1445 e_dbg("Full Duplex\n"); in e1000e_phy_force_speed_duplex_setup()
1453 e_dbg("Forcing 100mb\n"); in e1000e_phy_force_speed_duplex_setup()
1457 e_dbg("Forcing 10mb\n"); in e1000e_phy_force_speed_duplex_setup()
1888 e_dbg("Phy info is only valid for copper media\n"); in e1000e_get_phy_info_m88()
1897 e_dbg("Phy info is only valid if link is up\n"); in e1000e_get_phy_info_m88()
1963 e_dbg("Phy info is only valid if link is up\n"); in e1000e_get_phy_info_igp()
2021 e_dbg("Phy info is only valid if link is up\n"); in e1000_get_phy_info_ife()
2144 e_dbg("Running IGP 3 PHY init script\n"); in e1000e_phy_init_script_igp3()
2549 e_dbg("Could not set Port Control page\n"); in e1000_enable_phy_wakeup_reg_access_bm()
2555 e_dbg("Could not read PHY register %d.%d\n", in e1000_enable_phy_wakeup_reg_access_bm()
2569 e_dbg("Could not write PHY register %d.%d\n", in e1000_enable_phy_wakeup_reg_access_bm()
2598 e_dbg("Could not set Port Control page\n"); in e1000_disable_phy_wakeup_reg_access_bm()
2605 e_dbg("Could not restore PHY register %d.%d\n", in e1000_disable_phy_wakeup_reg_access_bm()
2647 e_dbg("Attempting to access page %d while gig enabled.\n", in e1000_access_phy_wakeup_reg_bm()
2654 e_dbg("Could not enable PHY wakeup reg access\n"); in e1000_access_phy_wakeup_reg_bm()
2659 e_dbg("Accessing PHY page %d reg 0x%x\n", page, reg); in e1000_access_phy_wakeup_reg_bm()
2664 e_dbg("Could not write address opcode to page %d\n", page); in e1000_access_phy_wakeup_reg_bm()
2679 e_dbg("Could not access PHY reg %d.%d\n", page, reg); in e1000_access_phy_wakeup_reg_bm()
2781 e_dbg("reading PHY page %d (or 0x%x shifted) reg 0x%x\n", page, in __e1000_read_phy_reg_hv()
2905 e_dbg("writing PHY page %d (or 0x%x shifted) reg 0x%x\n", page, in __e1000_write_phy_reg_hv()
3004 e_dbg("Could not write the Address Offset port register\n"); in e1000_access_phy_debug_regs_hv()
3015 e_dbg("Could not access the Data port register\n"); in e1000_access_phy_debug_regs_hv()
3118 e_dbg("Waiting for forced speed/duplex link on 82577 phy\n"); in e1000_phy_force_speed_duplex_82577()
3126 e_dbg("Link taking longer than expected.\n"); in e1000_phy_force_speed_duplex_82577()
3157 e_dbg("Phy info is only valid if link is up\n"); in e1000_get_phy_info_82577()