Lines Matching refs:hw_dbg
148 hw_dbg(hw, "I2C byte read combined error - Retry.\n"); in ixgbe_read_i2c_combined_generic_int()
150 hw_dbg(hw, "I2C byte read combined error.\n"); in ixgbe_read_i2c_combined_generic_int()
213 hw_dbg(hw, "I2C byte write combined error - Retry.\n"); in ixgbe_write_i2c_combined_generic_int()
215 hw_dbg(hw, "I2C byte write combined error.\n"); in ixgbe_write_i2c_combined_generic_int()
324 hw_dbg(hw, "MNG_VETO bit detected.\n"); in ixgbe_check_reset_blocked()
459 hw_dbg(hw, "PHY reset polling failed to complete.\n"); in ixgbe_reset_phy_generic()
502 hw_dbg(hw, "PHY address command did not complete.\n"); in ixgbe_read_phy_reg_mdi()
529 hw_dbg(hw, "PHY read command didn't complete\n"); in ixgbe_read_phy_reg_mdi()
606 hw_dbg(hw, "PHY address cmd didn't complete\n"); in ixgbe_write_phy_reg_mdi()
634 hw_dbg(hw, "PHY write cmd didn't complete\n"); in ixgbe_write_phy_reg_mdi()
1301 hw_dbg(hw, "PHY reset did not complete.\n"); in ixgbe_reset_phy_nl()
1326 hw_dbg(hw, "DELAY: %d MS\n", edata); in ixgbe_reset_phy_nl()
1330 hw_dbg(hw, "DATA:\n"); in ixgbe_reset_phy_nl()
1343 hw_dbg(hw, "Wrote %4.4x to %4.4x\n", eword, in ixgbe_reset_phy_nl()
1351 hw_dbg(hw, "CONTROL:\n"); in ixgbe_reset_phy_nl()
1353 hw_dbg(hw, "EOL\n"); in ixgbe_reset_phy_nl()
1356 hw_dbg(hw, "SOL\n"); in ixgbe_reset_phy_nl()
1358 hw_dbg(hw, "Bad control value\n"); in ixgbe_reset_phy_nl()
1363 hw_dbg(hw, "Bad control type\n"); in ixgbe_reset_phy_nl()
1646 hw_dbg(hw, "SFP+ module not supported\n"); in ixgbe_identify_sfp_module_generic()
1825 hw_dbg(hw, "QSFP module not supported\n"); in ixgbe_identify_qsfp_module_generic()
1908 hw_dbg(hw, "SFP+ module not supported\n"); in ixgbe_get_sfp_init_sequence_offsets()
1921 hw_dbg(hw, "No matching SFP+ module found\n"); in ixgbe_get_sfp_init_sequence_offsets()
2077 hw_dbg(hw, "I2C byte read error - Retrying.\n"); in ixgbe_read_i2c_byte_generic_int()
2079 hw_dbg(hw, "I2C byte read error.\n"); in ixgbe_read_i2c_byte_generic_int()
2178 hw_dbg(hw, "I2C byte write error - Retrying.\n"); in ixgbe_write_i2c_byte_generic_int()
2180 hw_dbg(hw, "I2C byte write error.\n"); in ixgbe_write_i2c_byte_generic_int()
2381 hw_dbg(hw, "I2C ack was not received.\n"); in ixgbe_get_i2c_ack()
2453 hw_dbg(hw, "I2C data was not set to %X\n", data); in ixgbe_clock_out_i2c_bit()
2549 hw_dbg(hw, "Error - I2C data was not set to %X.\n", data); in ixgbe_set_i2c_data()