Lines Matching refs:outb
86 outb(3, qbase + 3); /* reset SCSI */ in ql_zap()
87 outb(2, qbase + 3); /* reset chip */ in ql_zap()
167 outb(*request++, qbase + 4); in ql_pdma()
227 outb(2, qbase + 3); /* reset chip */ in ql_icmd()
229 outb(1, qbase + 3); /* clear fifo */ in ql_icmd()
232 outb(1, qbase + 8); /* set for PIO pseudo DMA */ in ql_icmd()
233 outb(0, qbase + 0xb); /* disable ints */ in ql_icmd()
236 outb(0x40, qbase + 0xb); /* enable features */ in ql_icmd()
239 outb(qlcfgc, qbase + 0xc); in ql_icmd()
241 outb(0x40 | qlcfg8 | priv->qinitid, qbase + 8); in ql_icmd()
242 outb(qlcfg7, qbase + 7); in ql_icmd()
243 outb(qlcfg6, qbase + 6); in ql_icmd()
244 outb(qlcfg5, qbase + 5); /* select timer */ in ql_icmd()
245 outb(qlcfg9 & 7, qbase + 9); /* prescaler */ in ql_icmd()
247 outb(scmd_id(cmd), qbase + 4); in ql_icmd()
250 outb(cmd->cmnd[i], qbase + 2); in ql_icmd()
253 outb(0x41, qbase + 3); /* select and send command */ in ql_icmd()
303 outb(1, qbase + 3); /* clear fifo */ in ql_pcmd()
310 outb(reqlen, qbase); /* low-mid xfer cnt */ in ql_pcmd()
311 outb(reqlen >> 8, qbase + 1); /* low-mid xfer cnt */ in ql_pcmd()
312 outb(reqlen >> 16, qbase + 0xe); /* high xfer cnt */ in ql_pcmd()
313 outb(0x90, qbase + 3); /* command do xfer */ in ql_pcmd()
367 outb(0x11, qbase + 3); /* get status and message */ in ql_pcmd()
385 outb(0x12, qbase + 3); /* done, disconnect */ in ql_pcmd()
568 outb(1, qbase + 8); /* set for PIO pseudo DMA */ in qlogicfas408_setup()
570 outb(0x40 | qlcfg8 | id, qbase + 8); /* (ini) bus id, disable scsi rst */ in qlogicfas408_setup()
571 outb(qlcfg5, qbase + 5); /* select timer */ in qlogicfas408_setup()
572 outb(qlcfg9, qbase + 9); /* prescaler */ in qlogicfas408_setup()
575 outb(3, qbase + 3); in qlogicfas408_setup()
607 outb(0, qbase + 0xb); /* disable ints */ in qlogicfas408_disable_ints()