Lines Matching refs:serial
14 the console before standard serial driver is probed. The console is
17 source "drivers/tty/serial/8250/Kconfig"
19 comment "Non-8250 serial port support"
22 tristate "ARM AMBA PL010 serial port support"
33 bool "Support for console on AMBA serial port"
49 tristate "ARM AMBA PL011 serial port support"
60 bool "Support for console on AMBA serial port"
84 the console before standard serial driver is probed. This is enabled
96 the console before standard serial driver is probed. This is enabled
101 tristate "BCM1xxx on-chip DUART serial support"
106 Support for the asynchronous serial interface (DUART) included in
116 bool "Support for console on a BCM1xxx DUART serial port"
121 If you say Y here, it will be possible to use a serial port as the
129 bool "AT91 on-chip serial port support"
139 bool "Support for console on AT91 serial port"
149 bool "Support DMA transfers on AT91 serial port"
154 and from the Atmel AT91 serial port. In order to
172 The ttySn nodes are legally reserved for the 8250 serial driver
173 but are often misused by other serial drivers.
200 tristate "Meson serial port support"
219 tristate "CLPS711X serial port support"
228 bool "Support for console on CLPS711X serial port"
238 tristate "Samsung SoC serial support"
245 these ports, depending on how the serial port pins are configured.
262 serial driver
265 bool "Support for console on Samsung SoC serial port"
270 Allow selection of the S3C24XX on-board serial ports for use as
281 tristate "NVIDIA Tegra20/30 SoC serial controller"
287 provide all of these ports, depending on how the serial port
297 Support for the mailbox-based TCU (Tegra Combined UART) serial port.
298 TCU is a virtual serial port that allows multiplexing multiple data
299 streams into a single hardware serial port.
302 bool "Support for console on a Tegra TCU serial port"
335 bool "DECstation DZ serial driver"
340 DZ11-family serial controllers for DECstations and VAXstations,
344 bool "Support console on DECstation DZ serial driver"
349 If you say Y here, it will be possible to use a serial port as the
354 Note that the firmware uses ttyS3 as the serial console on
360 tristate "DECstation Z85C30 serial support"
365 Support for the Zilog 85C350 serial communications controller used
366 for serial ports in newer DECstation systems. These include the
374 bool "Support for console on a DECstation Z85C30 serial port"
379 If you say Y here, it will be possible to use a serial port as the
384 Note that the firmware uses ttyS1 as the serial console on the
390 tristate "DC21285 serial port support"
395 PCI bridge you can enable its onboard serial port by enabling this
399 bool "Console on DC21285 serial port"
403 If you have enabled the serial port on the 21285 footbridge you can
414 bool "PXA serial port support (DEPRECATED)"
421 can enable its onboard serial ports by enabling this option.
431 bool "Console on PXA serial port (DEPRECATED)"
436 If you have enabled the serial port on the Intel XScale PXA
450 bool "SA1100 serial port support"
456 can enable its onboard serial port by enabling this option.
461 bool "Console on SA1100 serial port"
465 If you have enabled the serial port on the SA1100/SA1110 StrongARM
476 tristate "IMX serial port support"
483 can enable its onboard serial port by enabling this option.
486 tristate "Console on IMX serial port"
490 If you have enabled the serial port on the Freescale IMX
500 bool "Earlycon on IMX serial port"
512 tristate "Xilinx uartlite serial port support"
516 Say Y here if you want to use the Xilinx uartlite serial controller.
522 bool "Support for console on Xilinx uartlite serial port"
532 int "Maximum number of uartlite serial ports"
548 tristate "Sun Zilog8530 serial support"
551 This driver supports the Zilog8530 serial ports found on many Sparc
552 systems. Say Y or M if you want to be able to these serial ports.
555 bool "Console on Sun Zilog8530 serial port"
558 If you would like to be able to use the Zilog8530 serial port
563 tristate "Sun SU serial support"
566 This driver supports the 8250 serial ports that run the keyboard and
568 to these serial ports.
571 bool "Console on Sun SU serial port"
574 If you would like to be able to use the SU serial port
584 Saying Y here will enable the hardware MUX serial driver for
598 bool "Support for console on serial MUX"
619 tristate "Sun Siemens SAB82532 serial support"
622 This driver supports the Siemens SAB82532 DUSCC serial ports on newer
624 serial ports.
627 bool "Console on Sun Siemens SAB82532 serial port"
630 If you would like to be able to use the SAB82532 serial port
642 tristate "SGI Zilog8530 serial support"
646 This driver supports the Zilog8530 serial ports found on SGI
647 systems. Say Y or M if you want to be able to these serial ports.
650 bool "Console on SGI Zilog8530 serial port"
655 tristate "SuperH SCI(F) serial port support"
661 int "Maximum number of SCI(F) serial ports" if EXPERT
689 tristate "LPC32XX high speed serial port support"
694 Support for the LPC32XX high speed serial ports (up to 900kbps).
700 bool "Enable LPC32XX high speed UART serial console"
704 If you would like to be able to use one of the high speed serial
718 bool "Coldfire serial support"
722 This serial driver supports the Freescale Coldfire serial ports.
725 int "Default baudrate for Coldfire serial ports"
730 ColdFire serial ports. The usual default varies from board to board,
734 bool "Coldfire serial console support"
738 Enable a ColdFire internal serial port to be the system console.
745 This driver supports the Zilog z85C30 serial ports found on
747 Say Y or M if you want to be able to these serial ports.
755 8250 serial port driver also uses these numbers, which means
763 access the built-in serial ports on powermacs will need to
775 bool "Console on Mac or PowerMac z85c30 serial port"
779 If you would like to be able to use the z85c30 serial port
784 tristate "CPM SCC/SMC serial port support"
788 This driver supports the SCC and SMC serial ports on Motorola
792 bool "Support for console on CPM SCC/SMC serial port"
808 tristate "Microchip PIC32 serial support"
812 If you have a PIC32, this driver supports the serial ports.
814 Say Y or M to use PIC32 serial ports, otherwise say N. Note that
815 to use a serial port as a console, this must be included in kernel and
819 bool "PIC32 serial console support"
824 of the serial ports.
829 tristate "Freescale MPC52xx/MPC512x family PSC serial support"
833 This driver supports MPC52xx and MPC512x PSC serial ports. If you would
839 bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
843 Select this options if you'd like to use one of the PSC serial port
847 int "Freescale MPC52xx/MPC512x family PSC serial port baud"
862 This driver is for a family of multiport serial adapters
889 bool "TX39XX/49XX SIO act as standard serial"
907 a console on a serial port, say Y. Otherwise, say N.
915 of cards which provide multiple serial ports. You would need
926 tristate "MSM on-chip serial port support"
931 bool "MSM serial console support"
937 tristate "QCOM on-chip GENI based serial port support"
952 bool "VIA VT8500 on-chip serial port support"
957 bool "VIA VT8500 serial console support"
962 tristate "OMAP serial port support"
967 can enable its onboard serial ports by enabling this option.
970 with the omap-serial driver. DMA support can be enabled from platform
974 bool "Console on OMAP serial port"
978 Select this option if you would like to use omap serial port as
1014 tristate "Lantiq serial driver"
1032 tristate "Freescale QUICC Engine serial port support"
1037 This driver supports the QE serial ports on Freescale embedded
1041 tristate "SCCNXP serial port support"
1049 bool "Console on SCCNXP serial port"
1053 Support for console on SCCNXP serial ports.
1059 tristate "SC16IS7xx serial support"
1063 This selects support for SC16IS7xx serial ports.
1113 bool "Console on BCM63xx serial port"
1118 If you have enabled the serial port on the BCM63xx CPU
1122 tristate "GRLIB APBUART serial support"
1126 Add support for the GRLIB APBUART serial port.
1129 bool "Console on GRLIB APBUART serial port"
1247 tristate "AR933X serial port support"
1259 bool "Console on AR933X serial port"
1266 int "Maximum number of AR933X serial ports"
1270 Set this to the number of serial ports you want the driver
1307 Set this to the number of serial ports you want the driver
1316 RocketPort INFINITY families of PCI/PCIe multiport serial adapters.
1335 tristate "Freescale lpuart serial port support"
1342 bool "Console on Freescale lpuart serial port"
1347 If you have enabled the lpuart serial port on the Freescale SoCs,
1351 tristate "Freescale LINFlexD UART serial port support"
1358 bool "Console on Freescale LINFlexD UART serial port"
1363 If you have enabled the LINFlexD UART serial port on the Freescale
1367 tristate "Conexant Digicolor CX92xxx USART serial port support"
1374 bool "Console on Conexant Digicolor serial port"
1378 If you have enabled the USART serial port on Conexant Digicolor
1382 tristate "ST ASC serial port support"
1410 tristate "Support for Spreadtrum serial"
1414 This enables the driver for the Spreadtrum's serial.
1422 Support for early debug console using Spreadtrum's serial. This enables
1423 the console before standard serial driver is probed. This is enabled
1428 tristate "STMicroelectronics STM32 serial port support"
1446 bool "Marvell EBU serial port support"
1451 based on the Armada-3700 SoC and wish to use the on-board serial
1457 bool "Console on Marvell EBU serial port"
1469 tristate "Actions Semi Owl serial port support"
1474 Say 'Y' here if you wish to use the on-board serial port.
1478 bool "Console on Actions Semi Owl serial port"
1488 bool "RDA Micro serial port support"
1493 Say 'Y' here if you wish to use the on-board serial port.
1497 bool "Console on RDA Micro serial port"
1507 tristate "Milbeaut USIO/UART serial port support"
1521 bool "Support for console on MILBEAUT USIO/UART serial port"
1533 tristate "LiteUART serial port support"
1539 This driver is for the FPGA-based LiteUART serial controller from LiteX
1542 Say 'Y' or 'M' here if you wish to use the LiteUART serial controller.
1550 Set this to the maximum number of serial ports you want the driver
1554 bool "LiteUART serial port console support"
1559 Say 'Y' or 'M' here if you wish to use the FPGA-based LiteUART serial