Lines Matching refs:dev_dbg
266 dev_dbg(&dev->dev, "%s - wanted to read %d, but only read %d\n", in ti_vread_sync()
308 dev_dbg(&port->dev, "%s - port %d, mask %x\n", __func__, port_number, mask); in purge_port()
328 dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, length); in read_download_mem()
341 dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, read_length); in read_download_mem()
354 dev_dbg(&dev->dev, "%s - ERROR %x\n", __func__, status); in read_download_mem()
389 dev_dbg(&serial->serial->dev->dev, "%s - ERROR %x\n", __func__, status); in read_boot_mem()
394 dev_dbg(&serial->serial->dev->dev, "%s - start_address = %x, length = %d\n", in read_boot_mem()
431 …dev_dbg(&serial->serial->dev->dev, "%s - start_sddr = %x, length = %d\n", __func__, start_address,… in write_boot_mem()
455 dev_dbg(dev, "%s - BytesInFirstPage Addr = %x, length = %d\n", in write_i2c_mem()
470 dev_dbg(dev, "%s - ERROR %d\n", __func__, status); in write_i2c_mem()
488 dev_dbg(dev, "%s - Page Write Addr = %x, length = %d\n", in write_i2c_mem()
547 dev_dbg(&port->port->dev, "%s - XByteCount 0x%X\n", __func__, oedb->XByteCount); in tx_active()
555 dev_dbg(&port->port->dev, "%s - LSR = 0x%X\n", __func__, *lsr); in tx_active()
566 dev_dbg(&port->port->dev, "%s - return %d\n", __func__, bytes_left); in tx_active()
582 dev_dbg(&dev->dev, "%s - Number of Interfaces = %d\n", in choose_config()
584 dev_dbg(&dev->dev, "%s - MAX Power = %d\n", in choose_config()
713 dev_dbg(dev, "%s - structure too big, erroring out.\n", __func__); in check_i2c_image()
717 dev_dbg(dev, "%s Type = 0x%x\n", __func__, rom_desc->Type); in check_i2c_image()
767 dev_dbg(dev, "%s - Edge Descriptor not found in I2C\n", __func__); in get_manuf_info()
781 dev_dbg(dev, "%s - IonConfig 0x%x\n", __func__, desc->IonConfig); in get_manuf_info()
782 dev_dbg(dev, "%s - Version %d\n", __func__, desc->Version); in get_manuf_info()
783 dev_dbg(dev, "%s - Cpu/Board 0x%x\n", __func__, desc->CpuRev_BoardRev); in get_manuf_info()
784 dev_dbg(dev, "%s - NumPorts %d\n", __func__, desc->NumPorts); in get_manuf_info()
785 dev_dbg(dev, "%s - NumVirtualPorts %d\n", __func__, desc->NumVirtualPorts); in get_manuf_info()
786 dev_dbg(dev, "%s - TotalPorts %d\n", __func__, desc->TotalPorts); in get_manuf_info()
876 dev_dbg(dev, "%s - read 2 status error = %d\n", __func__, status); in i2c_type_bootmode()
878 dev_dbg(dev, "%s - read 2 data = 0x%x\n", __func__, *data); in i2c_type_bootmode()
880 dev_dbg(dev, "%s - ROM_TYPE_II\n", __func__); in i2c_type_bootmode()
889 dev_dbg(dev, "%s - read 3 status error = %d\n", __func__, status); in i2c_type_bootmode()
891 dev_dbg(dev, "%s - read 2 data = 0x%x\n", __func__, *data); in i2c_type_bootmode()
893 dev_dbg(dev, "%s - ROM_TYPE_III\n", __func__); in i2c_type_bootmode()
898 dev_dbg(dev, "%s - Unknown\n", __func__); in i2c_type_bootmode()
1077 dev_dbg(dev, "%s - RUNNING IN DOWNLOAD MODE\n", __func__); in do_download_mode()
1081 dev_dbg(dev, "%s - DOWNLOAD MODE -- BAD I2C\n", __func__); in do_download_mode()
1101 dev_dbg(dev, "%s - Wrong CPU Rev %d (Must be 2)\n", in do_download_mode()
1120 dev_dbg(dev, "%s - Found Type FIRMWARE (Type 2) record\n", in do_download_mode()
1155 dev_dbg(dev, "%s - >> FW Versions Device %d.%d Driver %d.%d\n", in do_download_mode()
1165 dev_dbg(dev, "%s - Update I2C dld from %d.%d to %d.%d\n", in do_download_mode()
1235 dev_dbg(dev, "%s - HARDWARE RESET\n", __func__); in do_download_mode()
1243 dev_dbg(dev, "%s - HARDWARE RESET return %d\n", in do_download_mode()
1282 dev_dbg(dev, "%s - Found Type BLANK FIRMWARE (Type F2) record\n", in do_download_mode()
1329 dev_dbg(dev, "%s - can't read header back\n", in do_download_mode()
1338 dev_dbg(dev, "%s - write download record failed\n", in do_download_mode()
1350 dev_dbg(dev, "%s - Start firmware update\n", __func__); in do_download_mode()
1358 dev_dbg(dev, "%s - Update complete 0x%x\n", __func__, in do_download_mode()
1385 dev_dbg(dev, "%s - RUNNING IN BOOT MODE\n", __func__); in do_boot_mode()
1394 dev_dbg(dev, "%s - VID = 0x%x\n", __func__, in do_boot_mode()
1431 dev_dbg(dev, "%s - Wrong CPU Rev %d (Must be 2)\n", in do_boot_mode()
1477 dev_dbg(dev, "%s - Downloading operational code image version %d.%d (TI UMP)\n", in do_boot_mode()
1485 dev_dbg(dev, "%s - Error downloading operational code image\n", __func__); in do_boot_mode()
1492 dev_dbg(dev, "%s - Download successful -- Device rebooting...\n", __func__); in do_boot_mode()
1499 dev_dbg(dev, "%s - STAYING IN BOOT MODE\n", __func__); in do_boot_mode()
1516 dev_dbg(&port->port->dev, "%s - %x\n", __func__, mcr); in restore_mcr()
1553 dev_dbg(&edge_port->port->dev, "%s - %02x\n", __func__, msr); in handle_new_msr()
1590 dev_dbg(&edge_port->port->dev, "%s - %02x\n", __func__, new_lsr); in handle_new_lsr()
1640 dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", in edge_interrupt_callback()
1650 dev_dbg(&urb->dev->dev, "%s - no data in urb\n", __func__); in edge_interrupt_callback()
1658 dev_dbg(dev, "%s - expecting packet of size 2, got %d\n", __func__, length); in edge_interrupt_callback()
1664 dev_dbg(dev, "%s - port_number %d, function %d, info 0x%x\n", __func__, in edge_interrupt_callback()
1675 dev_dbg(dev, "%s - edge_port not found\n", __func__); in edge_interrupt_callback()
1685 dev_dbg(dev, "%s - LSR Event Port %u LSR Status = %02x\n", in edge_interrupt_callback()
1690 dev_dbg(dev, "%s - ===== Port %d LSR Status = %02x ======\n", in edge_interrupt_callback()
1699 dev_dbg(dev, "%s - ===== Port %u MSR Status = %02x ======\n", in edge_interrupt_callback()
1738 dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status); in edge_bulk_in_callback()
1756 dev_dbg(dev, "%s ===== Port %u LSR Status = %02x, Data = %02x ======\n", in edge_bulk_in_callback()
1767 dev_dbg(dev, "%s - close pending, dropping data on the floor\n", in edge_bulk_in_callback()
1817 dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", in edge_bulk_out_callback()
1872 dev_dbg(&port->dev, "%s - Sending UMPC_OPEN_PORT\n", __func__); in edge_open()
1907 dev_dbg(&port->dev, "ShadowMSR 0x%X\n", edge_port->shadow_msr); in edge_open()
1911 dev_dbg(&port->dev, "ShadowMCR 0x%X\n", edge_port->shadow_mcr); in edge_open()
1984 dev_dbg(&port->dev, "%s - send umpc_close_port\n", __func__); in edge_close()
2004 dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__); in edge_write()
2086 dev_dbg(&port->dev, "%s - returns %u\n", __func__, room); in edge_write_room()
2103 dev_dbg(&port->dev, "%s - returns %u\n", __func__, chars); in edge_chars_in_buffer()
2237 dev_dbg(dev, "%s - data bits = 5\n", __func__); in change_port_settings()
2241 dev_dbg(dev, "%s - data bits = 6\n", __func__); in change_port_settings()
2245 dev_dbg(dev, "%s - data bits = 7\n", __func__); in change_port_settings()
2250 dev_dbg(dev, "%s - data bits = 8\n", __func__); in change_port_settings()
2258 dev_dbg(dev, "%s - parity = odd\n", __func__); in change_port_settings()
2262 dev_dbg(dev, "%s - parity = even\n", __func__); in change_port_settings()
2266 dev_dbg(dev, "%s - parity = none\n", __func__); in change_port_settings()
2271 dev_dbg(dev, "%s - stop bits = 2\n", __func__); in change_port_settings()
2274 dev_dbg(dev, "%s - stop bits = 1\n", __func__); in change_port_settings()
2281 dev_dbg(dev, "%s - RTS/CTS is enabled\n", __func__); in change_port_settings()
2283 dev_dbg(dev, "%s - RTS/CTS is disabled\n", __func__); in change_port_settings()
2297 dev_dbg(dev, "%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n", in change_port_settings()
2300 dev_dbg(dev, "%s - INBOUND XON/XOFF is disabled\n", __func__); in change_port_settings()
2305 dev_dbg(dev, "%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n", in change_port_settings()
2308 dev_dbg(dev, "%s - OUTBOUND XON/XOFF is disabled\n", __func__); in change_port_settings()
2328 dev_dbg(dev, "%s - baud rate = %d, wBaudRate = %d\n", __func__, baud, config->wBaudRate); in change_port_settings()
2330 dev_dbg(dev, "wBaudRate: %d\n", (int)(461550L / config->wBaudRate)); in change_port_settings()
2331 dev_dbg(dev, "wFlags: 0x%x\n", config->wFlags); in change_port_settings()
2332 dev_dbg(dev, "bDataBits: %d\n", config->bDataBits); in change_port_settings()
2333 dev_dbg(dev, "bParity: %d\n", config->bParity); in change_port_settings()
2334 dev_dbg(dev, "bStopBits: %d\n", config->bStopBits); in change_port_settings()
2335 dev_dbg(dev, "cXon: %d\n", config->cXon); in change_port_settings()
2336 dev_dbg(dev, "cXoff: %d\n", config->cXoff); in change_port_settings()
2337 dev_dbg(dev, "bUartMode: %d\n", config->bUartMode); in change_port_settings()
2346 dev_dbg(dev, "%s - error %d when trying to write config to device\n", in change_port_settings()
2414 dev_dbg(&port->dev, "%s -- %x\n", __func__, result); in edge_tiocmget()
2431 dev_dbg(&port->dev, "%s - error %d sending break set/clear command.\n", in edge_break()
2569 dev_dbg(&port->dev, in edge_port_probe()
2620 dev_dbg(dev, "%s: setting uart_mode = %d\n", __func__, v); in uart_mode_store()