Lines Matching refs:dev_dbg
232 dev_dbg(&port->dev, "mos7840_set_reg_sync offset is %x, value %x\n", reg, val); in mos7840_set_reg_sync()
266 dev_dbg(&port->dev, "%s offset is %x, return val %x\n", __func__, reg, *val); in mos7840_get_reg_sync()
290 dev_dbg(&port->dev, "%s application number is %x\n", __func__, val); in mos7840_set_uart_reg()
319 dev_dbg(&port->dev, "%s application number is %x\n", __func__, Wval); in mos7840_get_uart_reg()
338 dev_dbg(&port->dev, "SpRegOffset is %2x\n", mos7840_port->SpRegOffset); in mos7840_dump_serial_port()
339 dev_dbg(&port->dev, "ControlRegOffset is %2x\n", mos7840_port->ControlRegOffset); in mos7840_dump_serial_port()
340 dev_dbg(&port->dev, "DCRRegOffset is %2x\n", mos7840_port->DcrRegOffset); in mos7840_dump_serial_port()
361 dev_dbg(&urb->dev->dev, "%s - urb shutting down: %d\n", in mos7840_set_led_callback()
365 dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", in mos7840_set_led_callback()
441 dev_dbg(&urb->dev->dev, "nonzero read bulk status received: %d\n", status); in mos7840_bulk_in_callback()
454 dev_dbg(&port->dev, "icount.rx is %d:\n", port->icount.rx); in mos7840_bulk_in_callback()
464 dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, retval = %d\n", retval); in mos7840_bulk_in_callback()
493 dev_dbg(&port->dev, "nonzero write bulk status received:%d\n", status); in mos7840_bulk_out_data_callback()
558 dev_dbg(&port->dev, "Reading Spreg failed\n"); in mos7840_open()
564 dev_dbg(&port->dev, "writing Spreg failed\n"); in mos7840_open()
571 dev_dbg(&port->dev, "writing Spreg failed\n"); in mos7840_open()
580 dev_dbg(&port->dev, "Reading Controlreg failed\n"); in mos7840_open()
588 dev_dbg(&port->dev, "writing Controlreg failed\n"); in mos7840_open()
599 dev_dbg(&port->dev, "disabling interrupts failed\n"); in mos7840_open()
606 dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n"); in mos7840_open()
613 dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n"); in mos7840_open()
674 dev_dbg(&port->dev, "port number is %d\n", port->port_number); in mos7840_open()
675 dev_dbg(&port->dev, "minor number is %d\n", port->minor); in mos7840_open()
676 dev_dbg(&port->dev, "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress); in mos7840_open()
677 dev_dbg(&port->dev, "BulkOut endpoint is %d\n", port->bulk_out_endpointAddress); in mos7840_open()
678 dev_dbg(&port->dev, "Interrupt endpoint is %d\n", port->interrupt_in_endpointAddress); in mos7840_open()
679 dev_dbg(&port->dev, "port's number in the device is %d\n", mos7840_port->port_num); in mos7840_open()
701 dev_dbg(&port->dev, "%s: bulkin endpoint is %d\n", __func__, port->bulk_in_endpointAddress); in mos7840_open()
749 dev_dbg(&port->dev, "%s - returns %u\n", __func__, chars); in mos7840_chars_in_buffer()
803 dev_dbg(&port->dev, "%s mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR); in mos7840_break()
830 dev_dbg(&mos7840_port->port->dev, "%s - returns %u\n", __func__, room); in mos7840_write_room()
865 dev_dbg(&port->dev, "URB:%d\n", i); in mos7840_write()
872 dev_dbg(&port->dev, "%s - no more free urbs\n", __func__); in mos7840_write()
907 dev_dbg(&port->dev, "bulkout endpoint is %d\n", port->bulk_out_endpointAddress); in mos7840_write()
924 dev_dbg(&port->dev, "icount.tx is %d:\n", port->icount.tx); in mos7840_write()
1011 dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result); in mos7840_tiocmget()
1044 dev_dbg(&port->dev, "setting MODEM_CONTROL_REGISTER Failed\n"); in mos7840_tiocmset()
1060 dev_dbg(&port->dev, "%s - %d\n", __func__, baudRate); in mos7840_calc_baud_rate_divisor()
1106 dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudRate); in mos7840_send_cmd_write_baud_rate()
1117 dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n"); in mos7840_send_cmd_write_baud_rate()
1130 dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n"); in mos7840_send_cmd_write_baud_rate()
1145 dev_dbg(&port->dev, "reading spreg failed in set_serial_baud\n"); in mos7840_send_cmd_write_baud_rate()
1152 dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n"); in mos7840_send_cmd_write_baud_rate()
1168 dev_dbg(&port->dev, "set_serial_baud Value to write DLL is %x\n", Data); in mos7840_send_cmd_write_baud_rate()
1172 dev_dbg(&port->dev, "set_serial_baud Value to write DLM is %x\n", Data); in mos7840_send_cmd_write_baud_rate()
1232 dev_dbg(&port->dev, "%s - parity = odd\n", __func__); in mos7840_change_port_settings()
1235 dev_dbg(&port->dev, "%s - parity = even\n", __func__); in mos7840_change_port_settings()
1239 dev_dbg(&port->dev, "%s - parity = none\n", __func__); in mos7840_change_port_settings()
1248 dev_dbg(&port->dev, "%s - stop bits = 2\n", __func__); in mos7840_change_port_settings()
1251 dev_dbg(&port->dev, "%s - stop bits = 1\n", __func__); in mos7840_change_port_settings()
1259 dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is %x\n", __func__, in mos7840_change_port_settings()
1301 dev_dbg(&port->dev, "%s", "Picked default baud...\n"); in mos7840_change_port_settings()
1305 dev_dbg(&port->dev, "%s - baud rate = %d\n", __func__, baud); in mos7840_change_port_settings()
1316 dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n", in mos7840_change_port_settings()
1321 dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is End %x\n", __func__, in mos7840_change_port_settings()
1346 dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n", in mos7840_set_termios()
1394 dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__); in mos7840_ioctl()
1524 dev_dbg(dev, "Writing ZLP_REG5 failed status-0x%x\n", status); in mos7840_attach()
1526 dev_dbg(dev, "ZLP_REG5 Writing success status%d\n", status); in mos7840_attach()
1545 dev_dbg(&port->dev, "mos7840_startup: configuring port %d\n", pnum); in mos7840_port_probe()
1561 dev_dbg(&port->dev, "port->minor = %d\n", port->minor); in mos7840_port_probe()
1562 dev_dbg(&port->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num); in mos7840_port_probe()
1586 dev_dbg(&port->dev, "Reading ControlReg failed status-0x%x\n", status); in mos7840_port_probe()
1589 dev_dbg(&port->dev, "ControlReg Reading success val is %x, status%d\n", Data, status); in mos7840_port_probe()
1598 dev_dbg(&port->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status); in mos7840_port_probe()
1601 dev_dbg(&port->dev, "ControlReg Writing success(rx_disable) status%d\n", status); in mos7840_port_probe()
1609 dev_dbg(&port->dev, "Writing DCR0 failed status-0x%x\n", status); in mos7840_port_probe()
1612 dev_dbg(&port->dev, "DCR0 Writing success status%d\n", status); in mos7840_port_probe()
1618 dev_dbg(&port->dev, "Writing DCR1 failed status-0x%x\n", status); in mos7840_port_probe()
1621 dev_dbg(&port->dev, "DCR1 Writing success status%d\n", status); in mos7840_port_probe()
1627 dev_dbg(&port->dev, "Writing DCR2 failed status-0x%x\n", status); in mos7840_port_probe()
1630 dev_dbg(&port->dev, "DCR2 Writing success status%d\n", status); in mos7840_port_probe()
1636 dev_dbg(&port->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status); in mos7840_port_probe()
1639 dev_dbg(&port->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status); in mos7840_port_probe()
1644 dev_dbg(&port->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status); in mos7840_port_probe()
1647 dev_dbg(&port->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status); in mos7840_port_probe()
1653 dev_dbg(&port->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status); in mos7840_port_probe()
1656 dev_dbg(&port->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status); in mos7840_port_probe()
1664 dev_dbg(&port->dev, "ZLIP offset %x\n", in mos7840_port_probe()
1667 dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 2, status); in mos7840_port_probe()
1670 dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 2, status); in mos7840_port_probe()
1676 dev_dbg(&port->dev, "ZLIP offset %x\n", in mos7840_port_probe()
1679 dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 1, status); in mos7840_port_probe()
1682 dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 1, status); in mos7840_port_probe()