Lines Matching refs:to
19 Say Y or M if you want to add support for codecs attached to the
20 Tegra20 AC97 interface. You will also need to select the individual
21 machine drivers to support below.
26 Say Y or M if you want to add support for the Tegra20 DAS module.
27 You will also need to select the individual machine drivers to
34 Say Y or M if you want to add support for codecs attached to the
35 Tegra20 I2S interface. You will also need to select the individual
36 machine drivers to support below.
41 Say Y or M if you want to add support for the Tegra20 SPDIF interface.
42 You will also need to select the individual machine drivers to support
48 Say Y or M if you want to add support for the Tegra30 AHUB module.
49 You will also need to select the individual machine drivers to
56 Say Y or M if you want to add support for codecs attached to the
57 Tegra30 I2S interface. You will also need to select the individual
58 machine drivers to support below.
63 Config to enable Audio Hub (AHUB) module, which comprises of a
64 switch called Audio Crossbar (AXBAR) used to configure or modify
67 Say Y or M if you want to add support for Tegra210 AHUB module.
72 Config to enable the Digital MIC (DMIC) controller which is used
73 to interface with Pulse Density Modulation (PDM) input devices.
74 The DMIC controller implements a converter to convert PDM signals
75 to Pulse Code Modulation (PCM) signals. This can be viewed as a
77 Say Y or M if you want to add support for Tegra210 DMIC module.
82 Config to enable the Inter-IC Sound (I2S) Controller which
84 point-to-point serial interfaces. It can interface with I2S
86 Say Y or M if you want to add support for Tegra210 I2S module.
91 Config to enable the Digital Speaker Controller (DSPK) which
92 converts the multi-bit Pulse Code Modulation (PCM) audio input to
95 that up-samples the input to the desired sampling rate by
96 interpolation and then converts the oversampled PCM input to
98 Say Y or M if you want to add support for Tegra186 DSPK module.
103 Config to enable ADMAIF which is the interface between ADMA and
104 Audio Hub (AHUB). Each ADMA channel that sends/receives data to/
106 sending data to AHUB pairs with an ADMAIF Tx channel, where as
109 Say Y or M if you want to add support for Tegra210 ADMAIF module.
114 Config to enable the digital Master Volume Controller (MVC) which
115 provides gain or attenuation to a digital signal path. It can be
118 Say Y or M if you want to add support for Tegra210 MVC module.
123 Config to enable the Sampling Frequency Converter (SFC) which
124 converts the sampling frequency of input signal to another
127 Say Y or M if you want to add support for Tegra210 SFC module.
132 Config to enable the Audio Multiplexer (AMX) which can multiplex
133 four input streams (each of up to 16 channels) and generate
134 output stream (of up to 16 channels). A byte RAM helps to form an
136 Say Y or M if you want to add support for Tegra210 AMX module.
141 Config to enable the Audio Demultiplexer (ADX) which takes an
142 input stream (up to 16 channels) and demultiplexes it into four
143 output streams (each of up to 16 channels). A byte RAM helps to
145 frame. Its design is identical to that of byte RAM in the AMX
147 Say Y or M if you want to add support for Tegra210 ADX module.
152 Config to enable the Mixer module which can help to mix multiple
157 Say Y or M if you want to add support for Tegra210 Mixer module.
163 Config to enable Tegra audio machine driver based on generic
164 audio graph driver. It is a thin driver written to customize
177 Say Y or M here if you want to add support for SoC audio on Tegra
186 Say Y or M here if you want to add support for SoC audio on Tegra
195 Say Y or M here if you want to add support for SoC audio on Tegra
206 Say Y or M here if you want to add support for SoC audio on Tegra
215 Say Y or M here if you want to add support for SoC audio on the
224 Say Y or M here if you want to add support for SoC audio on the
233 Say Y or M here if you want to add support for SoC audio on Tegra
242 Say Y or M here if you want to add support for SoC audio on Tegra
251 Say Y or M here if you want to add support for SoC audio on Tegra