Lines Matching refs:a
7 On a pre-production system, the ability to execute arbitrary, bare-metal code at
12 scratch, this is a complex task on some platforms, depending on the level of
15 Rather than booting a baremetal application, a possible compromise is to boot
17 boot flow, where a modified BL2 boots an EL3 payload, instead of loading the
21 - putting the system into a known architectural state;
45 The EL3 payload image is a standalone image and is not part of the FIP. It is
49 place. In this case, booting it is just a matter of specifying the right
57 moment for a debugger to take control of the target and load the payload (for
60 It is expected that this loading method will work in most cases, as a debugger
61 connection is usually available in a pre-production system. The user is free to
70 improve performance in a development environment. When secure world cold boot
71 is complete, TF-A simply jumps to a BL33 base address provided at build time.
74 used when compiling TF-A. For example, the following command will create a FIP
75 without a BL33 and prepare to jump to a BL33 image loaded at address