Lines Matching refs:code
6 integrator can tailor this code to the system configuration to some extent,
10 document which provides greater implementation details around the reset code,
13 General reset code flow
16 The TF-A reset code is implemented in BL1 by default. The following high-level
19 |Default reset code flow|
45 |Reset code flow with programmable reset address|
58 Therefore, the cold boot code has to arbitrate access to hardware resources
67 |Reset code flow with single CPU released out of reset|
85 |Reset code flow with programmable reset address and single CPU released out of reset|
108 images might be done by the Trusted Boot Firmware or by platform code in BL31.
131 In this configuration, BL31 uses the same reset framework and code as the one
145 can be passed in registers by previous boot stages. Instead, the platform code
152 This might be done by the Trusted Boot Firmware or by platform code in BL31.
158 .. |Default reset code flow| image:: ../resources/diagrams/default_reset_code.png
159 .. |Reset code flow with programmable reset address| image:: ../resources/diagrams/reset_code_no_bo…
160 .. |Reset code flow with single CPU released out of reset| image:: ../resources/diagrams/reset_code…
161 .. |Reset code flow with programmable reset address and single CPU released out of reset| image:: .…