Lines Matching refs:option
85 file system image an additional FVP configuration option
94 FVPs can be launched with ``--cadi-server`` option such that a
101 the models. The models can be launched with ``-Q 100`` option if they are
113 cluster topology and this option can be used to override the default value.
125 a single cluster. This option defaults to 4.
128 in the system. This option defaults to 1. Note that the build option
134 - ``FVP_GICV3`` : The GICv3 only driver is selected (default option)
141 and this option is needed to specify the appropriate DTS file.
144 FIP. See :ref:`Firmware Design` for details on HW_CONFIG. This option is
145 similar to the ``FVP_HW_CONFIG_DTS`` option, but it directly specifies the
146 HW_CONFIG blob instead of the DTS file. This option is useful to override
150 inactive/fused CPU cores as read-only. The default value of this option
397 - The default use-case for the Foundation FVP is to use the ``--gicv3`` option
398 and enable the GICv3 device in the model. Note that without this option,
405 ``--arm-v8.0`` option, or build TF-A with an appropriate value for