Lines Matching refs:enabled

59    FIP. Automatically enabled if ``SP_LAYOUT_FILE`` is provided.
98    If enabled, it is needed to use a compiler that supports the option
124    Note that Pointer Authentication is enabled for Non-secure world
149 -  ``COT``: When Trusted Boot is enabled, selects the desired chain of trust.
155    this is only enabled for a debug build of the firmware.
170    This option must be equal to 1 (enabled) when ``SPD=spmd`` and
185    Note that Pointer Authentication is enabled for Non-secure world irrespective
207    Board Boot authentication at runtime. This option is meant to be enabled only
209    flag has to be enabled. 0 is the default.
245    generate A32 code. This option is enabled by default only in AArch64 debug
289    be enabled. If ``ENABLE_PMF`` is set, the residency statistics are tracked in
304    registers so are enabled together. Using this option without
324    for AArch64. Note that when SVE is enabled for the Non-secure world, access
333    systems that have SPM_MM enabled.
337    requires ENABLE_SVE_FOR_NS to be enabled.  The default is 0 and it is
373    ``MEASURED_BOOT`` is enabled. For a list of valid values, see ``LOG_LEVEL``.
443    This option defaults to 0 and if it is enabled, then it implies
444    ``WARMBOOT_ENABLE_DCACHE_EARLY`` is also enabled.
454    Note that, when ``HW_ASSISTED_COHERENCY`` is enabled, version 2 of
514    feature. If this flag is enabled ``TRUSTED_BOARD_BOOT`` must be set as well
570    enabled on Arm platforms, the option ``ARM_RECOM_STATE_ID_ENC`` needs to be
642    services/std_svc/spmd and enabled by ``SPD=spmd``. The SPM Dispatcher
643    cannot be enabled when the ``SPM_MM`` option is enabled.
652    Dispatcher option (``SPD=spmd``). When enabled (1) it indicates the SPMC
661    (disabled). This option cannot be enabled (``1``) when SPM Dispatcher is
662    enabled (``SPD=spmd``).
671    this directive if they need to handle such interruption. When enabled,
684       This option depends on ``CREATE_KEYS`` to be enabled. If the keys
711    this flag is enabled automatically. To enable support for armlink, platforms
730    at runtime using fconf. If this flag is enabled, COT descriptors are
740    SDEI_SUPPORT build flag is enabled.
767    cluster platforms). If this option is enabled, then warm boot path
772    default value of this flag is ``no``. Note this option must be enabled only
800       This option is enabled by build only if platform sets any of above defines
802       If this option is enabled for the EL3 software then EL2 software also must