Lines Matching refs:from
17 2. Boot from SD card
20 The SabreLite boards boot from the SPI NOR flash. These boards need their SPI
21 to be reflashed with a small SD card loader to support boot from SD card. The
22 board will still boot from SPI NOR, but the loader will in turn request the
23 BootROM to load the U-Boot from SD card.
25 The SD card loader is available from
44 from the fuses.
47 (the default one the board is shipped with, starting from the SPI NOR) and
65 Note: The board now boots from full size SD3 on the bottom of the board. NOT
69 This information originally taken from:
74 3. Boot from SPI NOR
77 The SabreLite board can also boot U-Boot directly from the SPI NOR flash:
88 Note: This procedure assumes you have booted using the desired U-Boot from an
106 3. Make sure SW1 switch is at position "01", so that it can boot from USB OTG.
118 6. Ensure SW1 is returned to "00" to boot from the fuses once done.