Lines Matching refs:at
36 U4 is located at address FE000000 and flash chip U7 is at FE800000.
37 If J22.E is OFF, then U7 is at FE000000 and U4 is at FE800000.
61 at which address. When J22.E is switched, addresses from FE000000
64 On the ITX, at the normal boot address (aka HIGHBOOT):
72 On the ITX, at the low boot address (LOWBOOT)
136 at address FE000000. When the BMS bit is 1, the ITX will boot the
137 image at address FEF00000.
139 Therefore, just put a U-Boot image at both FE000000 and FEF00000 and
144 1) Build an ITX image to be loaded at FEF00000
150 2) Take the u-boot.bin image and flash it at FEF00000.
157 3) Build an ITX image to be loaded at FE000000
163 4) Take the u-boot.bin image and flash it at FE000000.
170 The HRCW in flash is currently set to boot the image at FE000000.
173 B460A000 04040000 if you want to boot the image at FEF00000, or set
174 it to B060A000 04040000 if you want to boot the image at FE000000.
176 To change the HRCW in flash to boot the image at FEF00000, use these