Lines Matching refs:commands
4 bool "Support U-Boot commands"
8 to enter commands into U-Boot for a wide variety of purposes. It
9 also allows scripts (containing commands) to be executed.
10 Various commands and command categorys can be indivdually enabled.
11 Depending on the number of commands enabled, this can add
39 Enable auto completion of commands using TAB.
72 This option enables the possiblity to print all commands before
83 menu "Info commands"
182 menu "Boot commands"
306 Android DTB/DTBO image manipulation commands. Read dtb/dtbo files from
315 Android Boot Image manipulation commands. Allows one to extract
329 bool "Flattened Device Tree utility commands"
423 menu "Environment commands"
527 menu "Memory commands"
561 Provides commands to read and write EEPROM (Electrically Erasable
566 bool "Enable layout-aware eeprom commands"
570 When enabled, additional eeprom sub-commands become available.
580 Both commands can either auto detect the layout, or be told which
633 Memory commands.
658 bool "Enable cyclic md/mw commands"
661 Add the "mdc" and "mwc" memory commands. These are cyclic
662 "md/mw" commands.
742 menu "Compression commands"
774 menu "Device access commands"
803 - Get/pass a list of commands from/to recovery:
826 bool "demo - Demonstration commands for driver model"
963 bool "GPT partition renaming commands"
1012 For now no commands are provided to examine the trace buffer. The
1088 Enable the commands for reading, writing and programming the
1113 Enable the commands for reading, writing persistent named values
1122 MTD commands support.
1193 peripherals. Sub-commands allow bus enumeration, displaying and
1294 This provides various sub-commands to initialise and configure the
1298 bool "Enable UFS - Universal Flash Subsystem commands"
1301 "This provides commands to initialise and configure universal flash
1358 This provides commands to control the watchdog timer devices.
1371 menu "Shell scripting commands"
1402 menu "Android support commands"
1420 bool "Network commands"
1617 Allow control of L2 Ethernet switch commands. These are supported
1618 by the vsc9953 Ethernet driver at present. Sub-commands allow
1635 menu "Misc commands"
1657 bool "Enable board-specific commands"
1661 Some boards have board-specific commands which are only enabled
1663 option provides a way to control this. The commands that are enabled
1691 Enable the "icache" and "dcache" commands
1751 Run commands and summarize execution time.
1895 This enables two commands:
1900 The two commands are very similar except for the endianness of the
1914 menu "Power commands"
1950 menu "Security commands"
1983 Sub-commands:
2048 range of commands if provided - see 'tpm help' for details. The
2068 menu "Firmware commands"
2076 a number of sub-commands for performing EC tasks such as
2081 menu "Filesystem commands"
2087 of a BTRFS filesystem. There are no special commands for
2089 can be done by the generic 'fs' commands (see CMD_FS_GENERIC)
2099 U-Boot to actually boot the Operating System. Available commands are
2106 This provides commands for dealing with CRAMFS (Compressed ROM
2108 compressed. Two commands are provided:
2142 Enables SquashFS filesystem commands (e.g. load, ls).
2145 bool "filesystem commands"
2147 Enables filesystem commands (e.g. load, ls) that work for multiple
2159 Enables commands to support the JFFS2 (Journalling Flash File System
2209 This provides two commands which operate on a resierfs filesystem,
2220 This provides commands for accessing a YAFFS2 filesystem. Yet
2229 This provides commands to accessing a ZFS filesystem, commonly used
2230 on Solaris systems. Two sub-commands are provided:
2239 menu "Debug commands"
2260 This enables two commands:
2312 tristate "Enable UBI - Unsorted block images commands"
2320 to use U-Boot UBI commands.
2333 tristate "Enable UBIFS - Unsorted block images filesystem commands"