/* * Copyright (c) 2013-2021, ARM Limited and Contributors. All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ #include #include #include #include #include #if CTX_INCLUDE_EL2_REGS .global el2_sysregs_context_save .global el2_sysregs_context_restore #endif .global el1_sysregs_context_save .global el1_sysregs_context_restore #if CTX_INCLUDE_FPREGS .global fpregs_context_save .global fpregs_context_restore #endif .global save_gp_pmcr_pauth_regs .global restore_gp_pmcr_pauth_regs .global save_and_update_ptw_el1_sys_regs .global el3_exit #if CTX_INCLUDE_EL2_REGS /* ----------------------------------------------------- * The following function strictly follows the AArch64 * PCS to use x9-x16 (temporary caller-saved registers) * to save EL2 system register context. It assumes that * 'x0' is pointing to a 'el2_sys_regs' structure where * the register context will be saved. * * The following registers are not added. * AMEVCNTVOFF0_EL2 * AMEVCNTVOFF1_EL2 * ICH_AP0R_EL2 * ICH_AP1R_EL2 * ICH_LR_EL2 * ----------------------------------------------------- */ func el2_sysregs_context_save mrs x9, actlr_el2 mrs x10, afsr0_el2 stp x9, x10, [x0, #CTX_ACTLR_EL2] mrs x11, afsr1_el2 mrs x12, amair_el2 stp x11, x12, [x0, #CTX_AFSR1_EL2] mrs x13, cnthctl_el2 mrs x14, cntvoff_el2 stp x13, x14, [x0, #CTX_CNTHCTL_EL2] mrs x15, cptr_el2 str x15, [x0, #CTX_CPTR_EL2] #if CTX_INCLUDE_AARCH32_REGS mrs x16, dbgvcr32_el2 str x16, [x0, #CTX_DBGVCR32_EL2] #endif mrs x9, elr_el2 mrs x10, esr_el2 stp x9, x10, [x0, #CTX_ELR_EL2] mrs x11, far_el2 mrs x12, hacr_el2 stp x11, x12, [x0, #CTX_FAR_EL2] mrs x13, hcr_el2 mrs x14, hpfar_el2 stp x13, x14, [x0, #CTX_HCR_EL2] mrs x15, hstr_el2 mrs x16, ICC_SRE_EL2 stp x15, x16, [x0, #CTX_HSTR_EL2] mrs x9, ICH_HCR_EL2 mrs x10, ICH_VMCR_EL2 stp x9, x10, [x0, #CTX_ICH_HCR_EL2] mrs x11, mair_el2 mrs x12, mdcr_el2 stp x11, x12, [x0, #CTX_MAIR_EL2] #if ENABLE_SPE_FOR_LOWER_ELS mrs x13, PMSCR_EL2 str x13, [x0, #CTX_PMSCR_EL2] #endif mrs x14, sctlr_el2 str x14, [x0, #CTX_SCTLR_EL2] mrs x15, spsr_el2 mrs x16, sp_el2 stp x15, x16, [x0, #CTX_SPSR_EL2] mrs x9, tcr_el2 mrs x10, tpidr_el2 stp x9, x10, [x0, #CTX_TCR_EL2] mrs x11, ttbr0_el2 mrs x12, vbar_el2 stp x11, x12, [x0, #CTX_TTBR0_EL2] mrs x13, vmpidr_el2 mrs x14, vpidr_el2 stp x13, x14, [x0, #CTX_VMPIDR_EL2] mrs x15, vtcr_el2 mrs x16, vttbr_el2 stp x15, x16, [x0, #CTX_VTCR_EL2] #if CTX_INCLUDE_MTE_REGS mrs x9, TFSR_EL2 str x9, [x0, #CTX_TFSR_EL2] #endif #if ENABLE_MPAM_FOR_LOWER_ELS mrs x10, MPAM2_EL2 str x10, [x0, #CTX_MPAM2_EL2] mrs x11, MPAMHCR_EL2 mrs x12, MPAMVPM0_EL2 stp x11, x12, [x0, #CTX_MPAMHCR_EL2] mrs x13, MPAMVPM1_EL2 mrs x14, MPAMVPM2_EL2 stp x13, x14, [x0, #CTX_MPAMVPM1_EL2] mrs x15, MPAMVPM3_EL2 mrs x16, MPAMVPM4_EL2 stp x15, x16, [x0, #CTX_MPAMVPM3_EL2] mrs x9, MPAMVPM5_EL2 mrs x10, MPAMVPM6_EL2 stp x9, x10, [x0, #CTX_MPAMVPM5_EL2] mrs x11, MPAMVPM7_EL2 mrs x12, MPAMVPMV_EL2 stp x11, x12, [x0, #CTX_MPAMVPM7_EL2] #endif #if ARM_ARCH_AT_LEAST(8, 6) mrs x13, HAFGRTR_EL2 mrs x14, HDFGRTR_EL2 stp x13, x14, [x0, #CTX_HAFGRTR_EL2] mrs x15, HDFGWTR_EL2 mrs x16, HFGITR_EL2 stp x15, x16, [x0, #CTX_HDFGWTR_EL2] mrs x9, HFGRTR_EL2 mrs x10, HFGWTR_EL2 stp x9, x10, [x0, #CTX_HFGRTR_EL2] mrs x11, CNTPOFF_EL2 str x11, [x0, #CTX_CNTPOFF_EL2] #endif #if ARM_ARCH_AT_LEAST(8, 4) mrs x12, contextidr_el2 str x12, [x0, #CTX_CONTEXTIDR_EL2] #if CTX_INCLUDE_AARCH32_REGS mrs x13, sder32_el2 str x13, [x0, #CTX_SDER32_EL2] #endif mrs x14, ttbr1_el2 mrs x15, vdisr_el2 stp x14, x15, [x0, #CTX_TTBR1_EL2] #if CTX_INCLUDE_NEVE_REGS mrs x16, vncr_el2 str x16, [x0, #CTX_VNCR_EL2] #endif mrs x9, vsesr_el2 mrs x10, vstcr_el2 stp x9, x10, [x0, #CTX_VSESR_EL2] mrs x11, vsttbr_el2 mrs x12, TRFCR_EL2 stp x11, x12, [x0, #CTX_VSTTBR_EL2] #endif #if ARM_ARCH_AT_LEAST(8, 5) mrs x13, scxtnum_el2 str x13, [x0, #CTX_SCXTNUM_EL2] #endif ret endfunc el2_sysregs_context_save /* ----------------------------------------------------- * The following function strictly follows the AArch64 * PCS to use x9-x16 (temporary caller-saved registers) * to restore EL2 system register context. It assumes * that 'x0' is pointing to a 'el2_sys_regs' structure * from where the register context will be restored * The following registers are not restored * AMEVCNTVOFF0_EL2 * AMEVCNTVOFF1_EL2 * ICH_AP0R_EL2 * ICH_AP1R_EL2 * ICH_LR_EL2 * ----------------------------------------------------- */ func el2_sysregs_context_restore ldp x9, x10, [x0, #CTX_ACTLR_EL2] msr actlr_el2, x9 msr afsr0_el2, x10 ldp x11, x12, [x0, #CTX_AFSR1_EL2] msr afsr1_el2, x11 msr amair_el2, x12 ldp x13, x14, [x0, #CTX_CNTHCTL_EL2] msr cnthctl_el2, x13 msr cntvoff_el2, x14 ldr x15, [x0, #CTX_CPTR_EL2] msr cptr_el2, x15 #if CTX_INCLUDE_AARCH32_REGS ldr x16, [x0, #CTX_DBGVCR32_EL2] msr dbgvcr32_el2, x16 #endif ldp x9, x10, [x0, #CTX_ELR_EL2] msr elr_el2, x9 msr esr_el2, x10 ldp x11, x12, [x0, #CTX_FAR_EL2] msr far_el2, x11 msr hacr_el2, x12 ldp x13, x14, [x0, #CTX_HCR_EL2] msr hcr_el2, x13 msr hpfar_el2, x14 ldp x15, x16, [x0, #CTX_HSTR_EL2] msr hstr_el2, x15 msr ICC_SRE_EL2, x16 ldp x9, x10, [x0, #CTX_ICH_HCR_EL2] msr ICH_HCR_EL2, x9 msr ICH_VMCR_EL2, x10 ldp x11, x12, [x0, #CTX_MAIR_EL2] msr mair_el2, x11 msr mdcr_el2, x12 #if ENABLE_SPE_FOR_LOWER_ELS ldr x13, [x0, #CTX_PMSCR_EL2] msr PMSCR_EL2, x13 #endif ldr x14, [x0, #CTX_SCTLR_EL2] msr sctlr_el2, x14 ldp x15, x16, [x0, #CTX_SPSR_EL2] msr spsr_el2, x15 msr sp_el2, x16 ldp x9, x10, [x0, #CTX_TCR_EL2] msr tcr_el2, x9 msr tpidr_el2, x10 ldp x11, x12, [x0, #CTX_TTBR0_EL2] msr ttbr0_el2, x11 msr vbar_el2, x12 ldp x13, x14, [x0, #CTX_VMPIDR_EL2] msr vmpidr_el2, x13 msr vpidr_el2, x14 ldp x15, x16, [x0, #CTX_VTCR_EL2] msr vtcr_el2, x15 msr vttbr_el2, x16 #if CTX_INCLUDE_MTE_REGS ldr x9, [x0, #CTX_TFSR_EL2] msr TFSR_EL2, x9 #endif #if ENABLE_MPAM_FOR_LOWER_ELS ldr x10, [x0, #CTX_MPAM2_EL2] msr MPAM2_EL2, x10 ldp x11, x12, [x0, #CTX_MPAMHCR_EL2] msr MPAMHCR_EL2, x11 msr MPAMVPM0_EL2, x12 ldp x13, x14, [x0, #CTX_MPAMVPM1_EL2] msr MPAMVPM1_EL2, x13 msr MPAMVPM2_EL2, x14 ldp x15, x16, [x0, #CTX_MPAMVPM3_EL2] msr MPAMVPM3_EL2, x15 msr MPAMVPM4_EL2, x16 ldp x9, x10, [x0, #CTX_MPAMVPM5_EL2] msr MPAMVPM5_EL2, x9 msr MPAMVPM6_EL2, x10 ldp x11, x12, [x0, #CTX_MPAMVPM7_EL2] msr MPAMVPM7_EL2, x11 msr MPAMVPMV_EL2, x12 #endif #if ARM_ARCH_AT_LEAST(8, 6) ldp x13, x14, [x0, #CTX_HAFGRTR_EL2] msr HAFGRTR_EL2, x13 msr HDFGRTR_EL2, x14 ldp x15, x16, [x0, #CTX_HDFGWTR_EL2] msr HDFGWTR_EL2, x15 msr HFGITR_EL2, x16 ldp x9, x10, [x0, #CTX_HFGRTR_EL2] msr HFGRTR_EL2, x9 msr HFGWTR_EL2, x10 ldr x11, [x0, #CTX_CNTPOFF_EL2] msr CNTPOFF_EL2, x11 #endif #if ARM_ARCH_AT_LEAST(8, 4) ldr x12, [x0, #CTX_CONTEXTIDR_EL2] msr contextidr_el2, x12 #if CTX_INCLUDE_AARCH32_REGS ldr x13, [x0, #CTX_SDER32_EL2] msr sder32_el2, x13 #endif ldp x14, x15, [x0, #CTX_TTBR1_EL2] msr ttbr1_el2, x14 msr vdisr_el2, x15 #if CTX_INCLUDE_NEVE_REGS ldr x16, [x0, #CTX_VNCR_EL2] msr vncr_el2, x16 #endif ldp x9, x10, [x0, #CTX_VSESR_EL2] msr vsesr_el2, x9 msr vstcr_el2, x10 ldp x11, x12, [x0, #CTX_VSTTBR_EL2] msr vsttbr_el2, x11 msr TRFCR_EL2, x12 #endif #if ARM_ARCH_AT_LEAST(8, 5) ldr x13, [x0, #CTX_SCXTNUM_EL2] msr scxtnum_el2, x13 #endif ret endfunc el2_sysregs_context_restore #endif /* CTX_INCLUDE_EL2_REGS */ /* ------------------------------------------------------------------ * The following function strictly follows the AArch64 PCS to use * x9-x17 (temporary caller-saved registers) to save EL1 system * register context. It assumes that 'x0' is pointing to a * 'el1_sys_regs' structure where the register context will be saved. * ------------------------------------------------------------------ */ func el1_sysregs_context_save mrs x9, spsr_el1 mrs x10, elr_el1 stp x9, x10, [x0, #CTX_SPSR_EL1] #if !ERRATA_SPECULATIVE_AT mrs x15, sctlr_el1 mrs x16, tcr_el1 stp x15, x16, [x0, #CTX_SCTLR_EL1] #endif mrs x17, cpacr_el1 mrs x9, csselr_el1 stp x17, x9, [x0, #CTX_CPACR_EL1] mrs x10, sp_el1 mrs x11, esr_el1 stp x10, x11, [x0, #CTX_SP_EL1] mrs x12, ttbr0_el1 mrs x13, ttbr1_el1 stp x12, x13, [x0, #CTX_TTBR0_EL1] mrs x14, mair_el1 mrs x15, amair_el1 stp x14, x15, [x0, #CTX_MAIR_EL1] mrs x16, actlr_el1 mrs x17, tpidr_el1 stp x16, x17, [x0, #CTX_ACTLR_EL1] mrs x9, tpidr_el0 mrs x10, tpidrro_el0 stp x9, x10, [x0, #CTX_TPIDR_EL0] mrs x13, par_el1 mrs x14, far_el1 stp x13, x14, [x0, #CTX_PAR_EL1] mrs x15, afsr0_el1 mrs x16, afsr1_el1 stp x15, x16, [x0, #CTX_AFSR0_EL1] mrs x17, contextidr_el1 mrs x9, vbar_el1 stp x17, x9, [x0, #CTX_CONTEXTIDR_EL1] /* Save AArch32 system registers if the build has instructed so */ #if CTX_INCLUDE_AARCH32_REGS mrs x11, spsr_abt mrs x12, spsr_und stp x11, x12, [x0, #CTX_SPSR_ABT] mrs x13, spsr_irq mrs x14, spsr_fiq stp x13, x14, [x0, #CTX_SPSR_IRQ] mrs x15, dacr32_el2 mrs x16, ifsr32_el2 stp x15, x16, [x0, #CTX_DACR32_EL2] #endif /* Save NS timer registers if the build has instructed so */ #if NS_TIMER_SWITCH mrs x10, cntp_ctl_el0 mrs x11, cntp_cval_el0 stp x10, x11, [x0, #CTX_CNTP_CTL_EL0] mrs x12, cntv_ctl_el0 mrs x13, cntv_cval_el0 stp x12, x13, [x0, #CTX_CNTV_CTL_EL0] mrs x14, cntkctl_el1 str x14, [x0, #CTX_CNTKCTL_EL1] #endif /* Save MTE system registers if the build has instructed so */ #if CTX_INCLUDE_MTE_REGS mrs x15, TFSRE0_EL1 mrs x16, TFSR_EL1 stp x15, x16, [x0, #CTX_TFSRE0_EL1] mrs x9, RGSR_EL1 mrs x10, GCR_EL1 stp x9, x10, [x0, #CTX_RGSR_EL1] #endif ret endfunc el1_sysregs_context_save /* ------------------------------------------------------------------ * The following function strictly follows the AArch64 PCS to use * x9-x17 (temporary caller-saved registers) to restore EL1 system * register context. It assumes that 'x0' is pointing to a * 'el1_sys_regs' structure from where the register context will be * restored * ------------------------------------------------------------------ */ func el1_sysregs_context_restore ldp x9, x10, [x0, #CTX_SPSR_EL1] msr spsr_el1, x9 msr elr_el1, x10 #if !ERRATA_SPECULATIVE_AT ldp x15, x16, [x0, #CTX_SCTLR_EL1] msr sctlr_el1, x15 msr tcr_el1, x16 #endif ldp x17, x9, [x0, #CTX_CPACR_EL1] msr cpacr_el1, x17 msr csselr_el1, x9 ldp x10, x11, [x0, #CTX_SP_EL1] msr sp_el1, x10 msr esr_el1, x11 ldp x12, x13, [x0, #CTX_TTBR0_EL1] msr ttbr0_el1, x12 msr ttbr1_el1, x13 ldp x14, x15, [x0, #CTX_MAIR_EL1] msr mair_el1, x14 msr amair_el1, x15 ldp x16, x17, [x0, #CTX_ACTLR_EL1] msr actlr_el1, x16 msr tpidr_el1, x17 ldp x9, x10, [x0, #CTX_TPIDR_EL0] msr tpidr_el0, x9 msr tpidrro_el0, x10 ldp x13, x14, [x0, #CTX_PAR_EL1] msr par_el1, x13 msr far_el1, x14 ldp x15, x16, [x0, #CTX_AFSR0_EL1] msr afsr0_el1, x15 msr afsr1_el1, x16 ldp x17, x9, [x0, #CTX_CONTEXTIDR_EL1] msr contextidr_el1, x17 msr vbar_el1, x9 /* Restore AArch32 system registers if the build has instructed so */ #if CTX_INCLUDE_AARCH32_REGS ldp x11, x12, [x0, #CTX_SPSR_ABT] msr spsr_abt, x11 msr spsr_und, x12 ldp x13, x14, [x0, #CTX_SPSR_IRQ] msr spsr_irq, x13 msr spsr_fiq, x14 ldp x15, x16, [x0, #CTX_DACR32_EL2] msr dacr32_el2, x15 msr ifsr32_el2, x16 #endif /* Restore NS timer registers if the build has instructed so */ #if NS_TIMER_SWITCH ldp x10, x11, [x0, #CTX_CNTP_CTL_EL0] msr cntp_ctl_el0, x10 msr cntp_cval_el0, x11 ldp x12, x13, [x0, #CTX_CNTV_CTL_EL0] msr cntv_ctl_el0, x12 msr cntv_cval_el0, x13 ldr x14, [x0, #CTX_CNTKCTL_EL1] msr cntkctl_el1, x14 #endif /* Restore MTE system registers if the build has instructed so */ #if CTX_INCLUDE_MTE_REGS ldp x11, x12, [x0, #CTX_TFSRE0_EL1] msr TFSRE0_EL1, x11 msr TFSR_EL1, x12 ldp x13, x14, [x0, #CTX_RGSR_EL1] msr RGSR_EL1, x13 msr GCR_EL1, x14 #endif /* No explict ISB required here as ERET covers it */ ret endfunc el1_sysregs_context_restore /* ------------------------------------------------------------------ * The following function follows the aapcs_64 strictly to use * x9-x17 (temporary caller-saved registers according to AArch64 PCS) * to save floating point register context. It assumes that 'x0' is * pointing to a 'fp_regs' structure where the register context will * be saved. * * Access to VFP registers will trap if CPTR_EL3.TFP is set. * However currently we don't use VFP registers nor set traps in * Trusted Firmware, and assume it's cleared. * * TODO: Revisit when VFP is used in secure world * ------------------------------------------------------------------ */ #if CTX_INCLUDE_FPREGS func fpregs_context_save stp q0, q1, [x0, #CTX_FP_Q0] stp q2, q3, [x0, #CTX_FP_Q2] stp q4, q5, [x0, #CTX_FP_Q4] stp q6, q7, [x0, #CTX_FP_Q6] stp q8, q9, [x0, #CTX_FP_Q8] stp q10, q11, [x0, #CTX_FP_Q10] stp q12, q13, [x0, #CTX_FP_Q12] stp q14, q15, [x0, #CTX_FP_Q14] stp q16, q17, [x0, #CTX_FP_Q16] stp q18, q19, [x0, #CTX_FP_Q18] stp q20, q21, [x0, #CTX_FP_Q20] stp q22, q23, [x0, #CTX_FP_Q22] stp q24, q25, [x0, #CTX_FP_Q24] stp q26, q27, [x0, #CTX_FP_Q26] stp q28, q29, [x0, #CTX_FP_Q28] stp q30, q31, [x0, #CTX_FP_Q30] mrs x9, fpsr str x9, [x0, #CTX_FP_FPSR] mrs x10, fpcr str x10, [x0, #CTX_FP_FPCR] #if CTX_INCLUDE_AARCH32_REGS mrs x11, fpexc32_el2 str x11, [x0, #CTX_FP_FPEXC32_EL2] #endif ret endfunc fpregs_context_save /* ------------------------------------------------------------------ * The following function follows the aapcs_64 strictly to use x9-x17 * (temporary caller-saved registers according to AArch64 PCS) to * restore floating point register context. It assumes that 'x0' is * pointing to a 'fp_regs' structure from where the register context * will be restored. * * Access to VFP registers will trap if CPTR_EL3.TFP is set. * However currently we don't use VFP registers nor set traps in * Trusted Firmware, and assume it's cleared. * * TODO: Revisit when VFP is used in secure world * ------------------------------------------------------------------ */ func fpregs_context_restore ldp q0, q1, [x0, #CTX_FP_Q0] ldp q2, q3, [x0, #CTX_FP_Q2] ldp q4, q5, [x0, #CTX_FP_Q4] ldp q6, q7, [x0, #CTX_FP_Q6] ldp q8, q9, [x0, #CTX_FP_Q8] ldp q10, q11, [x0, #CTX_FP_Q10] ldp q12, q13, [x0, #CTX_FP_Q12] ldp q14, q15, [x0, #CTX_FP_Q14] ldp q16, q17, [x0, #CTX_FP_Q16] ldp q18, q19, [x0, #CTX_FP_Q18] ldp q20, q21, [x0, #CTX_FP_Q20] ldp q22, q23, [x0, #CTX_FP_Q22] ldp q24, q25, [x0, #CTX_FP_Q24] ldp q26, q27, [x0, #CTX_FP_Q26] ldp q28, q29, [x0, #CTX_FP_Q28] ldp q30, q31, [x0, #CTX_FP_Q30] ldr x9, [x0, #CTX_FP_FPSR] msr fpsr, x9 ldr x10, [x0, #CTX_FP_FPCR] msr fpcr, x10 #if CTX_INCLUDE_AARCH32_REGS ldr x11, [x0, #CTX_FP_FPEXC32_EL2] msr fpexc32_el2, x11 #endif /* * No explict ISB required here as ERET to * switch to secure EL1 or non-secure world * covers it */ ret endfunc fpregs_context_restore #endif /* CTX_INCLUDE_FPREGS */ /* ------------------------------------------------------------------ * The following function is used to save and restore all the general * purpose and ARMv8.3-PAuth (if enabled) registers. * It also checks if Secure Cycle Counter is not disabled in MDCR_EL3 * when ARMv8.5-PMU is implemented, and if called from Non-secure * state saves PMCR_EL0 and disables Cycle Counter. * * Ideally we would only save and restore the callee saved registers * when a world switch occurs but that type of implementation is more * complex. So currently we will always save and restore these * registers on entry and exit of EL3. * These are not macros to ensure their invocation fits within the 32 * instructions per exception vector. * clobbers: x18 * ------------------------------------------------------------------ */ func save_gp_pmcr_pauth_regs stp x0, x1, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X0] stp x2, x3, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X2] stp x4, x5, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X4] stp x6, x7, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X6] stp x8, x9, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X8] stp x10, x11, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X10] stp x12, x13, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X12] stp x14, x15, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X14] stp x16, x17, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X16] stp x18, x19, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X18] stp x20, x21, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X20] stp x22, x23, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X22] stp x24, x25, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X24] stp x26, x27, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X26] stp x28, x29, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X28] mrs x18, sp_el0 str x18, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_SP_EL0] /* ---------------------------------------------------------- * Check if earlier initialization MDCR_EL3.SCCD/MCCD to 1 * failed, meaning that FEAT_PMUv3p5/7 is not implemented and * PMCR_EL0 should be saved in non-secure context. * ---------------------------------------------------------- */ mov_imm x10, (MDCR_SCCD_BIT | MDCR_MCCD_BIT) mrs x9, mdcr_el3 tst x9, x10 bne 1f /* Secure Cycle Counter is not disabled */ mrs x9, pmcr_el0 /* Check caller's security state */ mrs x10, scr_el3 tst x10, #SCR_NS_BIT beq 2f /* Save PMCR_EL0 if called from Non-secure state */ str x9, [sp, #CTX_EL3STATE_OFFSET + CTX_PMCR_EL0] /* Disable cycle counter when event counting is prohibited */ 2: orr x9, x9, #PMCR_EL0_DP_BIT msr pmcr_el0, x9 isb 1: #if CTX_INCLUDE_PAUTH_REGS /* ---------------------------------------------------------- * Save the ARMv8.3-PAuth keys as they are not banked * by exception level * ---------------------------------------------------------- */ add x19, sp, #CTX_PAUTH_REGS_OFFSET mrs x20, APIAKeyLo_EL1 /* x21:x20 = APIAKey */ mrs x21, APIAKeyHi_EL1 mrs x22, APIBKeyLo_EL1 /* x23:x22 = APIBKey */ mrs x23, APIBKeyHi_EL1 mrs x24, APDAKeyLo_EL1 /* x25:x24 = APDAKey */ mrs x25, APDAKeyHi_EL1 mrs x26, APDBKeyLo_EL1 /* x27:x26 = APDBKey */ mrs x27, APDBKeyHi_EL1 mrs x28, APGAKeyLo_EL1 /* x29:x28 = APGAKey */ mrs x29, APGAKeyHi_EL1 stp x20, x21, [x19, #CTX_PACIAKEY_LO] stp x22, x23, [x19, #CTX_PACIBKEY_LO] stp x24, x25, [x19, #CTX_PACDAKEY_LO] stp x26, x27, [x19, #CTX_PACDBKEY_LO] stp x28, x29, [x19, #CTX_PACGAKEY_LO] #endif /* CTX_INCLUDE_PAUTH_REGS */ ret endfunc save_gp_pmcr_pauth_regs /* ------------------------------------------------------------------ * This function restores ARMv8.3-PAuth (if enabled) and all general * purpose registers except x30 from the CPU context. * x30 register must be explicitly restored by the caller. * ------------------------------------------------------------------ */ func restore_gp_pmcr_pauth_regs #if CTX_INCLUDE_PAUTH_REGS /* Restore the ARMv8.3 PAuth keys */ add x10, sp, #CTX_PAUTH_REGS_OFFSET ldp x0, x1, [x10, #CTX_PACIAKEY_LO] /* x1:x0 = APIAKey */ ldp x2, x3, [x10, #CTX_PACIBKEY_LO] /* x3:x2 = APIBKey */ ldp x4, x5, [x10, #CTX_PACDAKEY_LO] /* x5:x4 = APDAKey */ ldp x6, x7, [x10, #CTX_PACDBKEY_LO] /* x7:x6 = APDBKey */ ldp x8, x9, [x10, #CTX_PACGAKEY_LO] /* x9:x8 = APGAKey */ msr APIAKeyLo_EL1, x0 msr APIAKeyHi_EL1, x1 msr APIBKeyLo_EL1, x2 msr APIBKeyHi_EL1, x3 msr APDAKeyLo_EL1, x4 msr APDAKeyHi_EL1, x5 msr APDBKeyLo_EL1, x6 msr APDBKeyHi_EL1, x7 msr APGAKeyLo_EL1, x8 msr APGAKeyHi_EL1, x9 #endif /* CTX_INCLUDE_PAUTH_REGS */ /* ---------------------------------------------------------- * Restore PMCR_EL0 when returning to Non-secure state if * Secure Cycle Counter is not disabled in MDCR_EL3 when * ARMv8.5-PMU is implemented. * ---------------------------------------------------------- */ mrs x0, scr_el3 tst x0, #SCR_NS_BIT beq 2f /* ---------------------------------------------------------- * Back to Non-secure state. * Check if earlier initialization MDCR_EL3.SCCD/MCCD to 1 * failed, meaning that FEAT_PMUv3p5/7 is not implemented and * PMCR_EL0 should be restored from non-secure context. * ---------------------------------------------------------- */ mov_imm x1, (MDCR_SCCD_BIT | MDCR_MCCD_BIT) mrs x0, mdcr_el3 tst x0, x1 bne 2f ldr x0, [sp, #CTX_EL3STATE_OFFSET + CTX_PMCR_EL0] msr pmcr_el0, x0 2: ldp x0, x1, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X0] ldp x2, x3, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X2] ldp x4, x5, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X4] ldp x6, x7, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X6] ldp x8, x9, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X8] ldp x10, x11, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X10] ldp x12, x13, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X12] ldp x14, x15, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X14] ldp x16, x17, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X16] ldp x18, x19, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X18] ldp x20, x21, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X20] ldp x22, x23, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X22] ldp x24, x25, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X24] ldp x26, x27, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X26] ldr x28, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_SP_EL0] msr sp_el0, x28 ldp x28, x29, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X28] ret endfunc restore_gp_pmcr_pauth_regs /* * In case of ERRATA_SPECULATIVE_AT, save SCTLR_EL1 and TCR_EL1 * registers and update EL1 registers to disable stage1 and stage2 * page table walk */ func save_and_update_ptw_el1_sys_regs /* ---------------------------------------------------------- * Save only sctlr_el1 and tcr_el1 registers * ---------------------------------------------------------- */ mrs x29, sctlr_el1 str x29, [sp, #(CTX_EL1_SYSREGS_OFFSET + CTX_SCTLR_EL1)] mrs x29, tcr_el1 str x29, [sp, #(CTX_EL1_SYSREGS_OFFSET + CTX_TCR_EL1)] /* ------------------------------------------------------------ * Must follow below order in order to disable page table * walk for lower ELs (EL1 and EL0). First step ensures that * page table walk is disabled for stage1 and second step * ensures that page table walker should use TCR_EL1.EPDx * bits to perform address translation. ISB ensures that CPU * does these 2 steps in order. * * 1. Update TCR_EL1.EPDx bits to disable page table walk by * stage1. * 2. Enable MMU bit to avoid identity mapping via stage2 * and force TCR_EL1.EPDx to be used by the page table * walker. * ------------------------------------------------------------ */ orr x29, x29, #(TCR_EPD0_BIT) orr x29, x29, #(TCR_EPD1_BIT) msr tcr_el1, x29 isb mrs x29, sctlr_el1 orr x29, x29, #SCTLR_M_BIT msr sctlr_el1, x29 isb ret endfunc save_and_update_ptw_el1_sys_regs /* ------------------------------------------------------------------ * This routine assumes that the SP_EL3 is pointing to a valid * context structure from where the gp regs and other special * registers can be retrieved. * ------------------------------------------------------------------ */ func el3_exit #if ENABLE_ASSERTIONS /* el3_exit assumes SP_EL0 on entry */ mrs x17, spsel cmp x17, #MODE_SP_EL0 ASM_ASSERT(eq) #endif /* ---------------------------------------------------------- * Save the current SP_EL0 i.e. the EL3 runtime stack which * will be used for handling the next SMC. * Then switch to SP_EL3. * ---------------------------------------------------------- */ mov x17, sp msr spsel, #MODE_SP_ELX str x17, [sp, #CTX_EL3STATE_OFFSET + CTX_RUNTIME_SP] /* ---------------------------------------------------------- * Restore SPSR_EL3, ELR_EL3 and SCR_EL3 prior to ERET * ---------------------------------------------------------- */ ldr x18, [sp, #CTX_EL3STATE_OFFSET + CTX_SCR_EL3] ldp x16, x17, [sp, #CTX_EL3STATE_OFFSET + CTX_SPSR_EL3] msr scr_el3, x18 msr spsr_el3, x16 msr elr_el3, x17 #if IMAGE_BL31 /* ---------------------------------------------------------- * Restore CPTR_EL3. * ZCR is only restored if SVE is supported and enabled. * Synchronization is required before zcr_el3 is addressed. * ---------------------------------------------------------- */ ldp x19, x20, [sp, #CTX_EL3STATE_OFFSET + CTX_CPTR_EL3] msr cptr_el3, x19 ands x19, x19, #CPTR_EZ_BIT beq sve_not_enabled isb msr S3_6_C1_C2_0, x20 /* zcr_el3 */ sve_not_enabled: #endif #if IMAGE_BL31 && DYNAMIC_WORKAROUND_CVE_2018_3639 /* ---------------------------------------------------------- * Restore mitigation state as it was on entry to EL3 * ---------------------------------------------------------- */ ldr x17, [sp, #CTX_CVE_2018_3639_OFFSET + CTX_CVE_2018_3639_DISABLE] cbz x17, 1f blr x17 1: #endif restore_ptw_el1_sys_regs /* ---------------------------------------------------------- * Restore general purpose (including x30), PMCR_EL0 and * ARMv8.3-PAuth registers. * Exit EL3 via ERET to a lower exception level. * ---------------------------------------------------------- */ bl restore_gp_pmcr_pauth_regs ldr x30, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_LR] #if IMAGE_BL31 && RAS_EXTENSION /* ---------------------------------------------------------- * Issue Error Synchronization Barrier to synchronize SErrors * before exiting EL3. We're running with EAs unmasked, so * any synchronized errors would be taken immediately; * therefore no need to inspect DISR_EL1 register. * ---------------------------------------------------------- */ esb #else dsb sy #endif #ifdef IMAGE_BL31 str xzr, [sp, #CTX_EL3STATE_OFFSET + CTX_IS_IN_EL3] #endif exception_return endfunc el3_exit