config EFI_LOADER bool "Support running UEFI applications" depends on OF_LIBFDT && ( \ ARM && (SYS_CPU = arm1136 || \ SYS_CPU = arm1176 || \ SYS_CPU = armv7 || \ SYS_CPU = armv8) || \ X86 || RISCV || SANDBOX) # We need EFI_STUB_64BIT to be set on x86_64 with EFI_STUB depends on !EFI_STUB || !X86_64 || EFI_STUB_64BIT # We need EFI_STUB_32BIT to be set on x86_32 with EFI_STUB depends on !EFI_STUB || !X86 || X86_64 || EFI_STUB_32BIT default y if !ARM || SYS_CPU = armv7 || SYS_CPU = armv8 select LIB_UUID select HAVE_BLOCK_DEVICE select REGEX imply CFB_CONSOLE_ANSI imply FAT imply FAT_WRITE imply USB_KEYBOARD_FN_KEYS imply VIDEO_ANSI help Select this option if you want to run UEFI applications (like GNU GRUB or iPXE) on top of U-Boot. If this option is enabled, U-Boot will expose the UEFI API to a loaded application, enabling it to reuse U-Boot's device drivers. if EFI_LOADER config CMD_BOOTEFI_BOOTMGR bool "UEFI Boot Manager" default y help Select this option if you want to select the UEFI binary to be booted via UEFI variables Boot####, BootOrder, and BootNext. This enables the 'bootefi bootmgr' command. config EFI_SETUP_EARLY bool default n choice prompt "Store for non-volatile UEFI variables" default EFI_VARIABLE_FILE_STORE help Select where non-volatile UEFI variables shall be stored. config EFI_VARIABLE_FILE_STORE bool "Store non-volatile UEFI variables as file" depends on FAT_WRITE help Select this option if you want non-volatile UEFI variables to be stored as file /ubootefi.var on the EFI system partition. config EFI_MM_COMM_TEE bool "UEFI variables storage service via OP-TEE" depends on OPTEE help If OP-TEE is present and running StandAloneMM, dispatch all UEFI variable related operations to that. The application will verify, authenticate and store the variables on an RPMB. endchoice config EFI_VARIABLES_PRESEED bool "Initial values for UEFI variables" depends on EFI_VARIABLE_FILE_STORE help Include a file with the initial values for non-volatile UEFI variables into the U-Boot binary. If this configuration option is set, changes to authentication related variables (PK, KEK, db, dbx) are not allowed. if EFI_VARIABLES_PRESEED config EFI_VAR_SEED_FILE string "File with initial values of non-volatile UEFI variables" default ubootefi.var help File with initial values of non-volatile UEFI variables. The file must be in the same format as the storage in the EFI system partition. The easiest way to create it is by setting the non-volatile variables in U-Boot. If a relative file path is used, it is relative to the source directory. endif config EFI_VAR_BUF_SIZE int "Memory size of the UEFI variable store" default 16384 range 4096 2147483647 help This defines the size in bytes of the memory area reserved for keeping UEFI variables. When using StandAloneMM (CONFIG_EFI_MM_COMM_TEE=y) this value should match the value of PcdFlashNvStorageVariableSize used to compile the StandAloneMM module. Minimum 4096, default 16384. config EFI_GET_TIME bool "GetTime() runtime service" depends on DM_RTC default y help Provide the GetTime() runtime service at boottime. This service can be used by an EFI application to read the real time clock. config EFI_SET_TIME bool "SetTime() runtime service" depends on EFI_GET_TIME default y if ARCH_QEMU || SANDBOX default n help Provide the SetTime() runtime service at boottime. This service can be used by an EFI application to adjust the real time clock. config EFI_HAVE_CAPSULE_SUPPORT bool config EFI_RUNTIME_UPDATE_CAPSULE bool "UpdateCapsule() runtime service" default n select EFI_HAVE_CAPSULE_SUPPORT help Select this option if you want to use UpdateCapsule and QueryCapsuleCapabilities API's. config EFI_CAPSULE_ON_DISK bool "Enable capsule-on-disk support" select EFI_HAVE_CAPSULE_SUPPORT default n help Select this option if you want to use capsule-on-disk feature, that is, capsules can be fetched and executed from files under a specific directory on UEFI system partition instead of via UpdateCapsule API. config EFI_CAPSULE_ON_DISK_EARLY bool "Initiate capsule-on-disk at U-Boot boottime" depends on EFI_CAPSULE_ON_DISK default n select EFI_SETUP_EARLY help Normally, without this option enabled, capsules will be executed only at the first time of invoking one of efi command. If this option is enabled, capsules will be enforced to be executed as part of U-Boot initialisation so that they will surely take place whatever is set to distro_bootcmd. config EFI_CAPSULE_FIRMWARE bool default n config EFI_CAPSULE_FIRMWARE_MANAGEMENT bool "Capsule: Firmware Management Protocol" depends on EFI_HAVE_CAPSULE_SUPPORT default y help Select this option if you want to enable capsule-based firmware update using Firmware Management Protocol. config EFI_CAPSULE_AUTHENTICATE bool "Update Capsule authentication" depends on EFI_CAPSULE_FIRMWARE depends on EFI_CAPSULE_ON_DISK depends on EFI_CAPSULE_FIRMWARE_MANAGEMENT select SHA256 select RSA select RSA_VERIFY select RSA_VERIFY_WITH_PKEY select X509_CERTIFICATE_PARSER select PKCS7_MESSAGE_PARSER select PKCS7_VERIFY default n help Select this option if you want to enable capsule authentication config EFI_CAPSULE_FIRMWARE_FIT bool "FMP driver for FIT image" depends on EFI_CAPSULE_FIRMWARE_MANAGEMENT depends on FIT select UPDATE_FIT select DFU select EFI_CAPSULE_FIRMWARE default n help Select this option if you want to enable firmware management protocol driver for FIT image config EFI_CAPSULE_FIRMWARE_RAW bool "FMP driver for raw image" depends on EFI_CAPSULE_FIRMWARE_MANAGEMENT select DFU select DFU_WRITE_ALT select EFI_CAPSULE_FIRMWARE default n help Select this option if you want to enable firmware management protocol driver for raw image config EFI_DEVICE_PATH_TO_TEXT bool "Device path to text protocol" default y help The device path to text protocol converts device nodes and paths to human readable strings. config EFI_DEVICE_PATH_UTIL bool "Device path utilities protocol" default y help The device path utilities protocol creates and manipulates device paths and device nodes. It is required to run the EFI Shell. config EFI_DT_FIXUP bool "Device tree fixup protocol" depends on !GENERATE_ACPI_TABLE default y help The EFI device-tree fix-up protocol provides a function to let the firmware apply fix-ups. This may be used by boot loaders. config EFI_LOADER_HII bool "HII protocols" default y help The Human Interface Infrastructure is a complicated framework that allows UEFI applications to draw fancy menus and hook strings using a translation framework. U-Boot implements enough of its features to be able to run the UEFI Shell, but not more than that. config EFI_UNICODE_COLLATION_PROTOCOL2 bool "Unicode collation protocol" default y help The Unicode collation protocol is used for lexical comparisons. It is required to run the UEFI shell. if EFI_UNICODE_COLLATION_PROTOCOL2 config EFI_UNICODE_CAPITALIZATION bool "Support Unicode capitalization" default y help Select this option to enable correct handling of the capitalization of Unicode codepoints in the range 0x0000-0xffff. If this option is not set, only the the correct handling of the letters of the codepage used by the FAT file system is ensured. endif config EFI_LOADER_BOUNCE_BUFFER bool "EFI Applications use bounce buffers for DMA operations" depends on ARM64 default n help Some hardware does not support DMA to full 64bit addresses. For this hardware we can create a bounce buffer so that payloads don't have to worry about platform details. config EFI_PLATFORM_LANG_CODES string "Language codes supported by firmware" default "en-US" help This value is used to initialize the PlatformLangCodes variable. Its value is a semicolon (;) separated list of language codes in native RFC 4646 format, e.g. "en-US;de-DE". The first language code is used to initialize the PlatformLang variable. config EFI_HAVE_RUNTIME_RESET # bool "Reset runtime service is available" bool default y depends on ARCH_BCM283X || FSL_LAYERSCAPE || PSCI_RESET || \ SANDBOX || SYSRESET_X86 config EFI_GRUB_ARM32_WORKAROUND bool "Workaround for GRUB on 32bit ARM" default n if ARCH_BCM283X || ARCH_SUNXI || ARCH_QEMU default y depends on ARM && !ARM64 help GRUB prior to version 2.04 requires U-Boot to disable caches. This workaround currently is also needed on systems with caches that cannot be managed via CP15. config EFI_RNG_PROTOCOL bool "EFI_RNG_PROTOCOL support" depends on DM_RNG default y help Provide a EFI_RNG_PROTOCOL implementation using the hardware random number generator of the platform. config EFI_TCG2_PROTOCOL bool "EFI_TCG2_PROTOCOL support" depends on TPM_V2 help Provide a EFI_TCG2_PROTOCOL implementation using the TPM hardware of the platform. config EFI_TCG2_PROTOCOL_EVENTLOG_SIZE int "EFI_TCG2_PROTOCOL EventLog size" depends on EFI_TCG2_PROTOCOL default 4096 help Define the size of the EventLog for EFI_TCG2_PROTOCOL. Note that this is going to be allocated twice. One for the eventlog it self and one for the configuration table that is required from the spec config EFI_LOAD_FILE2_INITRD bool "EFI_FILE_LOAD2_PROTOCOL for Linux initial ramdisk" default n help Expose a EFI_FILE_LOAD2_PROTOCOL that the Linux UEFI stub can use to load the initial ramdisk. Once this is enabled using initrd= will stop working. config EFI_INITRD_FILESPEC string "initramfs path" default "host 0:1 initrd" depends on EFI_LOAD_FILE2_INITRD help Full path of the initramfs file, e.g. mmc 0:2 initramfs.cpio.gz. config EFI_SECURE_BOOT bool "Enable EFI secure boot support" depends on EFI_LOADER select SHA256 select RSA select RSA_VERIFY_WITH_PKEY select IMAGE_SIGN_INFO select ASYMMETRIC_KEY_TYPE select ASYMMETRIC_PUBLIC_KEY_SUBTYPE select X509_CERTIFICATE_PARSER select PKCS7_MESSAGE_PARSER select PKCS7_VERIFY default n help Select this option to enable EFI secure boot support. Once SecureBoot mode is enforced, any EFI binary can run only if it is signed with a trusted key. To do that, you need to install, at least, PK, KEK and db. endif