1# SPDX-License-Identifier: GPL-2.0-only
2config INTEL_POWERCLAMP
3	tristate "Intel PowerClamp idle injection driver"
4	depends on X86
5	depends on CPU_SUP_INTEL
6	help
7	  Enable this to enable Intel PowerClamp idle injection driver. This
8	  enforce idle time which results in more package C-state residency. The
9	  user interface is exposed via generic thermal framework.
10
11config X86_THERMAL_VECTOR
12	def_bool y
13	depends on X86 && CPU_SUP_INTEL && X86_LOCAL_APIC
14
15config X86_PKG_TEMP_THERMAL
16	tristate "X86 package temperature thermal driver"
17	depends on X86_THERMAL_VECTOR
18	select THERMAL_GOV_USER_SPACE
19	select THERMAL_WRITABLE_TRIPS
20	default m
21	help
22	  Enable this to register CPU digital sensor for package temperature as
23	  thermal zone. Each package will have its own thermal zone. There are
24	  two trip points which can be set by user to get notifications via thermal
25	  notification methods.
26
27config INTEL_SOC_DTS_IOSF_CORE
28	tristate
29	depends on X86 && PCI
30	select IOSF_MBI
31	help
32	  This is becoming a common feature for Intel SoCs to expose the additional
33	  digital temperature sensors (DTSs) using side band interface (IOSF). This
34	  implements the common set of helper functions to register, get temperature
35	  and get/set thresholds on DTSs.
36
37config INTEL_SOC_DTS_THERMAL
38	tristate "Intel SoCs DTS thermal driver"
39	depends on X86 && PCI && ACPI
40	select INTEL_SOC_DTS_IOSF_CORE
41	select THERMAL_WRITABLE_TRIPS
42	help
43	  Enable this to register Intel SoCs (e.g. Bay Trail) platform digital
44	  temperature sensor (DTS). These SoCs have two additional DTSs in
45	  addition to DTSs on CPU cores. Each DTS will be registered as a
46	  thermal zone. There are two trip points. One of the trip point can
47	  be set by user mode programs to get notifications via Linux thermal
48	  notification methods.The other trip is a critical trip point, which
49	  was set by the driver based on the TJ MAX temperature.
50
51config INTEL_QUARK_DTS_THERMAL
52	tristate "Intel Quark DTS thermal driver"
53	depends on X86_INTEL_QUARK
54	help
55	  Enable this to register Intel Quark SoC (e.g. X1000) platform digital
56	  temperature sensor (DTS). For X1000 SoC, it has one on-die DTS.
57	  The DTS will be registered as a thermal zone. There are two trip points:
58	  hot & critical. The critical trip point default value is set by
59	  underlying BIOS/Firmware.
60
61menu "ACPI INT340X thermal drivers"
62source "drivers/thermal/intel/int340x_thermal/Kconfig"
63endmenu
64
65config INTEL_BXT_PMIC_THERMAL
66	tristate "Intel Broxton PMIC thermal driver"
67	depends on X86 && INTEL_SOC_PMIC_BXTWC && REGMAP
68	help
69	  Select this driver for Intel Broxton PMIC with ADC channels monitoring
70	  system temperature measurements and alerts.
71	  This driver is used for monitoring the ADC channels of PMIC and handles
72	  the alert trip point interrupts and notifies the thermal framework with
73	  the trip point and temperature details of the zone.
74
75config INTEL_PCH_THERMAL
76	tristate "Intel PCH Thermal Reporting Driver"
77	depends on X86 && PCI
78	help
79	  Enable this to support thermal reporting on certain intel PCHs.
80	  Thermal reporting device will provide temperature reading,
81	  programmable trip points and other information.
82
83config INTEL_TCC_COOLING
84	tristate "Intel TCC offset cooling Driver"
85	depends on X86
86	help
87	  Enable this to support system cooling by adjusting the effective TCC
88	  activation temperature via the TCC Offset register, which is widely
89	  supported on modern Intel platforms.
90	  Note that, on different platforms, the behavior might be different
91	  on how fast the setting takes effect, and how much the CPU frequency
92	  is reduced.
93
94config INTEL_MENLOW
95	tristate "Thermal Management driver for Intel menlow platform"
96	depends on ACPI_THERMAL
97	help
98	  ACPI thermal management enhancement driver on
99	  Intel Menlow platform.
100
101	  If unsure, say N.
102