1 /*
2 * Copyright © 2006 Keith Packard
3 * Copyright © 2007-2008 Dave Airlie
4 * Copyright © 2007-2008 Intel Corporation
5 * Jesse Barnes <jesse.barnes@intel.com>
6 * Copyright © 2014 Intel Corporation
7 * Daniel Vetter <daniel.vetter@ffwll.ch>
8 *
9 * Permission is hereby granted, free of charge, to any person obtaining a
10 * copy of this software and associated documentation files (the "Software"),
11 * to deal in the Software without restriction, including without limitation
12 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
13 * and/or sell copies of the Software, and to permit persons to whom the
14 * Software is furnished to do so, subject to the following conditions:
15 *
16 * The above copyright notice and this permission notice shall be included in
17 * all copies or substantial portions of the Software.
18 *
19 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
20 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
21 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
22 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
23 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
24 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
25 * OTHER DEALINGS IN THE SOFTWARE.
26 */
27 #ifndef __DRM_MODES_H__
28 #define __DRM_MODES_H__
29
30 #include <linux/hdmi.h>
31
32 #include <drm/drm_mode_object.h>
33 #include <drm/drm_connector.h>
34
35 struct videomode;
36
37 /*
38 * Note on terminology: here, for brevity and convenience, we refer to connector
39 * control chips as 'CRTCs'. They can control any type of connector, VGA, LVDS,
40 * DVI, etc. And 'screen' refers to the whole of the visible display, which
41 * may span multiple monitors (and therefore multiple CRTC and connector
42 * structures).
43 */
44
45 /**
46 * enum drm_mode_status - hardware support status of a mode
47 * @MODE_OK: Mode OK
48 * @MODE_HSYNC: hsync out of range
49 * @MODE_VSYNC: vsync out of range
50 * @MODE_H_ILLEGAL: mode has illegal horizontal timings
51 * @MODE_V_ILLEGAL: mode has illegal vertical timings
52 * @MODE_BAD_WIDTH: requires an unsupported linepitch
53 * @MODE_NOMODE: no mode with a matching name
54 * @MODE_NO_INTERLACE: interlaced mode not supported
55 * @MODE_NO_DBLESCAN: doublescan mode not supported
56 * @MODE_NO_VSCAN: multiscan mode not supported
57 * @MODE_MEM: insufficient video memory
58 * @MODE_VIRTUAL_X: mode width too large for specified virtual size
59 * @MODE_VIRTUAL_Y: mode height too large for specified virtual size
60 * @MODE_MEM_VIRT: insufficient video memory given virtual size
61 * @MODE_NOCLOCK: no fixed clock available
62 * @MODE_CLOCK_HIGH: clock required is too high
63 * @MODE_CLOCK_LOW: clock required is too low
64 * @MODE_CLOCK_RANGE: clock/mode isn't in a ClockRange
65 * @MODE_BAD_HVALUE: horizontal timing was out of range
66 * @MODE_BAD_VVALUE: vertical timing was out of range
67 * @MODE_BAD_VSCAN: VScan value out of range
68 * @MODE_HSYNC_NARROW: horizontal sync too narrow
69 * @MODE_HSYNC_WIDE: horizontal sync too wide
70 * @MODE_HBLANK_NARROW: horizontal blanking too narrow
71 * @MODE_HBLANK_WIDE: horizontal blanking too wide
72 * @MODE_VSYNC_NARROW: vertical sync too narrow
73 * @MODE_VSYNC_WIDE: vertical sync too wide
74 * @MODE_VBLANK_NARROW: vertical blanking too narrow
75 * @MODE_VBLANK_WIDE: vertical blanking too wide
76 * @MODE_PANEL: exceeds panel dimensions
77 * @MODE_INTERLACE_WIDTH: width too large for interlaced mode
78 * @MODE_ONE_WIDTH: only one width is supported
79 * @MODE_ONE_HEIGHT: only one height is supported
80 * @MODE_ONE_SIZE: only one resolution is supported
81 * @MODE_NO_REDUCED: monitor doesn't accept reduced blanking
82 * @MODE_NO_STEREO: stereo modes not supported
83 * @MODE_NO_420: ycbcr 420 modes not supported
84 * @MODE_STALE: mode has become stale
85 * @MODE_BAD: unspecified reason
86 * @MODE_ERROR: error condition
87 *
88 * This enum is used to filter out modes not supported by the driver/hardware
89 * combination.
90 */
91 enum drm_mode_status {
92 MODE_OK = 0,
93 MODE_HSYNC,
94 MODE_VSYNC,
95 MODE_H_ILLEGAL,
96 MODE_V_ILLEGAL,
97 MODE_BAD_WIDTH,
98 MODE_NOMODE,
99 MODE_NO_INTERLACE,
100 MODE_NO_DBLESCAN,
101 MODE_NO_VSCAN,
102 MODE_MEM,
103 MODE_VIRTUAL_X,
104 MODE_VIRTUAL_Y,
105 MODE_MEM_VIRT,
106 MODE_NOCLOCK,
107 MODE_CLOCK_HIGH,
108 MODE_CLOCK_LOW,
109 MODE_CLOCK_RANGE,
110 MODE_BAD_HVALUE,
111 MODE_BAD_VVALUE,
112 MODE_BAD_VSCAN,
113 MODE_HSYNC_NARROW,
114 MODE_HSYNC_WIDE,
115 MODE_HBLANK_NARROW,
116 MODE_HBLANK_WIDE,
117 MODE_VSYNC_NARROW,
118 MODE_VSYNC_WIDE,
119 MODE_VBLANK_NARROW,
120 MODE_VBLANK_WIDE,
121 MODE_PANEL,
122 MODE_INTERLACE_WIDTH,
123 MODE_ONE_WIDTH,
124 MODE_ONE_HEIGHT,
125 MODE_ONE_SIZE,
126 MODE_NO_REDUCED,
127 MODE_NO_STEREO,
128 MODE_NO_420,
129 MODE_STALE = -3,
130 MODE_BAD = -2,
131 MODE_ERROR = -1
132 };
133
134 #define DRM_MODE(nm, t, c, hd, hss, hse, ht, hsk, vd, vss, vse, vt, vs, f) \
135 .name = nm, .status = 0, .type = (t), .clock = (c), \
136 .hdisplay = (hd), .hsync_start = (hss), .hsync_end = (hse), \
137 .htotal = (ht), .hskew = (hsk), .vdisplay = (vd), \
138 .vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \
139 .vscan = (vs), .flags = (f)
140
141 /**
142 * DRM_SIMPLE_MODE - Simple display mode
143 * @hd: Horizontal resolution, width
144 * @vd: Vertical resolution, height
145 * @hd_mm: Display width in millimeters
146 * @vd_mm: Display height in millimeters
147 *
148 * This macro initializes a &drm_display_mode that only contains info about
149 * resolution and physical size.
150 */
151 #define DRM_SIMPLE_MODE(hd, vd, hd_mm, vd_mm) \
152 .type = DRM_MODE_TYPE_DRIVER, .clock = 1 /* pass validation */, \
153 .hdisplay = (hd), .hsync_start = (hd), .hsync_end = (hd), \
154 .htotal = (hd), .vdisplay = (vd), .vsync_start = (vd), \
155 .vsync_end = (vd), .vtotal = (vd), .width_mm = (hd_mm), \
156 .height_mm = (vd_mm)
157
158 #define CRTC_INTERLACE_HALVE_V (1 << 0) /* halve V values for interlacing */
159 #define CRTC_STEREO_DOUBLE (1 << 1) /* adjust timings for stereo modes */
160 #define CRTC_NO_DBLSCAN (1 << 2) /* don't adjust doublescan */
161 #define CRTC_NO_VSCAN (1 << 3) /* don't adjust doublescan */
162 #define CRTC_STEREO_DOUBLE_ONLY (CRTC_STEREO_DOUBLE | CRTC_NO_DBLSCAN | CRTC_NO_VSCAN)
163
164 #define DRM_MODE_FLAG_3D_MAX DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF
165
166 #define DRM_MODE_MATCH_TIMINGS (1 << 0)
167 #define DRM_MODE_MATCH_CLOCK (1 << 1)
168 #define DRM_MODE_MATCH_FLAGS (1 << 2)
169 #define DRM_MODE_MATCH_3D_FLAGS (1 << 3)
170 #define DRM_MODE_MATCH_ASPECT_RATIO (1 << 4)
171
172 /**
173 * struct drm_display_mode - DRM kernel-internal display mode structure
174 * @hdisplay: horizontal display size
175 * @hsync_start: horizontal sync start
176 * @hsync_end: horizontal sync end
177 * @htotal: horizontal total size
178 * @hskew: horizontal skew?!
179 * @vdisplay: vertical display size
180 * @vsync_start: vertical sync start
181 * @vsync_end: vertical sync end
182 * @vtotal: vertical total size
183 * @vscan: vertical scan?!
184 * @crtc_hdisplay: hardware mode horizontal display size
185 * @crtc_hblank_start: hardware mode horizontal blank start
186 * @crtc_hblank_end: hardware mode horizontal blank end
187 * @crtc_hsync_start: hardware mode horizontal sync start
188 * @crtc_hsync_end: hardware mode horizontal sync end
189 * @crtc_htotal: hardware mode horizontal total size
190 * @crtc_hskew: hardware mode horizontal skew?!
191 * @crtc_vdisplay: hardware mode vertical display size
192 * @crtc_vblank_start: hardware mode vertical blank start
193 * @crtc_vblank_end: hardware mode vertical blank end
194 * @crtc_vsync_start: hardware mode vertical sync start
195 * @crtc_vsync_end: hardware mode vertical sync end
196 * @crtc_vtotal: hardware mode vertical total size
197 *
198 * This is the kernel API display mode information structure. For the
199 * user-space version see struct drm_mode_modeinfo.
200 *
201 * The horizontal and vertical timings are defined per the following diagram.
202 *
203 * ::
204 *
205 *
206 * Active Front Sync Back
207 * Region Porch Porch
208 * <-----------------------><----------------><-------------><-------------->
209 * //////////////////////|
210 * ////////////////////// |
211 * ////////////////////// |.................. ................
212 * _______________
213 * <----- [hv]display ----->
214 * <------------- [hv]sync_start ------------>
215 * <--------------------- [hv]sync_end --------------------->
216 * <-------------------------------- [hv]total ----------------------------->*
217 *
218 * This structure contains two copies of timings. First are the plain timings,
219 * which specify the logical mode, as it would be for a progressive 1:1 scanout
220 * at the refresh rate userspace can observe through vblank timestamps. Then
221 * there's the hardware timings, which are corrected for interlacing,
222 * double-clocking and similar things. They are provided as a convenience, and
223 * can be appropriately computed using drm_mode_set_crtcinfo().
224 *
225 * For printing you can use %DRM_MODE_FMT and DRM_MODE_ARG().
226 */
227 struct drm_display_mode {
228 /**
229 * @clock:
230 *
231 * Pixel clock in kHz.
232 */
233 int clock; /* in kHz */
234 u16 hdisplay;
235 u16 hsync_start;
236 u16 hsync_end;
237 u16 htotal;
238 u16 hskew;
239 u16 vdisplay;
240 u16 vsync_start;
241 u16 vsync_end;
242 u16 vtotal;
243 u16 vscan;
244 /**
245 * @flags:
246 *
247 * Sync and timing flags:
248 *
249 * - DRM_MODE_FLAG_PHSYNC: horizontal sync is active high.
250 * - DRM_MODE_FLAG_NHSYNC: horizontal sync is active low.
251 * - DRM_MODE_FLAG_PVSYNC: vertical sync is active high.
252 * - DRM_MODE_FLAG_NVSYNC: vertical sync is active low.
253 * - DRM_MODE_FLAG_INTERLACE: mode is interlaced.
254 * - DRM_MODE_FLAG_DBLSCAN: mode uses doublescan.
255 * - DRM_MODE_FLAG_CSYNC: mode uses composite sync.
256 * - DRM_MODE_FLAG_PCSYNC: composite sync is active high.
257 * - DRM_MODE_FLAG_NCSYNC: composite sync is active low.
258 * - DRM_MODE_FLAG_HSKEW: hskew provided (not used?).
259 * - DRM_MODE_FLAG_BCAST: <deprecated>
260 * - DRM_MODE_FLAG_PIXMUX: <deprecated>
261 * - DRM_MODE_FLAG_DBLCLK: double-clocked mode.
262 * - DRM_MODE_FLAG_CLKDIV2: half-clocked mode.
263 *
264 * Additionally there's flags to specify how 3D modes are packed:
265 *
266 * - DRM_MODE_FLAG_3D_NONE: normal, non-3D mode.
267 * - DRM_MODE_FLAG_3D_FRAME_PACKING: 2 full frames for left and right.
268 * - DRM_MODE_FLAG_3D_FIELD_ALTERNATIVE: interleaved like fields.
269 * - DRM_MODE_FLAG_3D_LINE_ALTERNATIVE: interleaved lines.
270 * - DRM_MODE_FLAG_3D_SIDE_BY_SIDE_FULL: side-by-side full frames.
271 * - DRM_MODE_FLAG_3D_L_DEPTH: ?
272 * - DRM_MODE_FLAG_3D_L_DEPTH_GFX_GFX_DEPTH: ?
273 * - DRM_MODE_FLAG_3D_TOP_AND_BOTTOM: frame split into top and bottom
274 * parts.
275 * - DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF: frame split into left and
276 * right parts.
277 */
278 u32 flags;
279
280 /**
281 * @crtc_clock:
282 *
283 * Actual pixel or dot clock in the hardware. This differs from the
284 * logical @clock when e.g. using interlacing, double-clocking, stereo
285 * modes or other fancy stuff that changes the timings and signals
286 * actually sent over the wire.
287 *
288 * This is again in kHz.
289 *
290 * Note that with digital outputs like HDMI or DP there's usually a
291 * massive confusion between the dot clock and the signal clock at the
292 * bit encoding level. Especially when a 8b/10b encoding is used and the
293 * difference is exactly a factor of 10.
294 */
295 int crtc_clock;
296 u16 crtc_hdisplay;
297 u16 crtc_hblank_start;
298 u16 crtc_hblank_end;
299 u16 crtc_hsync_start;
300 u16 crtc_hsync_end;
301 u16 crtc_htotal;
302 u16 crtc_hskew;
303 u16 crtc_vdisplay;
304 u16 crtc_vblank_start;
305 u16 crtc_vblank_end;
306 u16 crtc_vsync_start;
307 u16 crtc_vsync_end;
308 u16 crtc_vtotal;
309
310 /**
311 * @width_mm:
312 *
313 * Addressable size of the output in mm, projectors should set this to
314 * 0.
315 */
316 u16 width_mm;
317
318 /**
319 * @height_mm:
320 *
321 * Addressable size of the output in mm, projectors should set this to
322 * 0.
323 */
324 u16 height_mm;
325
326 /**
327 * @type:
328 *
329 * A bitmask of flags, mostly about the source of a mode. Possible flags
330 * are:
331 *
332 * - DRM_MODE_TYPE_PREFERRED: Preferred mode, usually the native
333 * resolution of an LCD panel. There should only be one preferred
334 * mode per connector at any given time.
335 * - DRM_MODE_TYPE_DRIVER: Mode created by the driver, which is all of
336 * them really. Drivers must set this bit for all modes they create
337 * and expose to userspace.
338 * - DRM_MODE_TYPE_USERDEF: Mode defined or selected via the kernel
339 * command line.
340 *
341 * Plus a big list of flags which shouldn't be used at all, but are
342 * still around since these flags are also used in the userspace ABI.
343 * We no longer accept modes with these types though:
344 *
345 * - DRM_MODE_TYPE_BUILTIN: Meant for hard-coded modes, unused.
346 * Use DRM_MODE_TYPE_DRIVER instead.
347 * - DRM_MODE_TYPE_DEFAULT: Again a leftover, use
348 * DRM_MODE_TYPE_PREFERRED instead.
349 * - DRM_MODE_TYPE_CLOCK_C and DRM_MODE_TYPE_CRTC_C: Define leftovers
350 * which are stuck around for hysterical raisins only. No one has an
351 * idea what they were meant for. Don't use.
352 */
353 u8 type;
354
355 /**
356 * @expose_to_userspace:
357 *
358 * Indicates whether the mode is to be exposed to the userspace.
359 * This is to maintain a set of exposed modes while preparing
360 * user-mode's list in drm_mode_getconnector ioctl. The purpose of
361 * this only lies in the ioctl function, and is not to be used
362 * outside the function.
363 */
364 bool expose_to_userspace;
365
366 /**
367 * @head:
368 *
369 * struct list_head for mode lists.
370 */
371 struct list_head head;
372
373 /**
374 * @name:
375 *
376 * Human-readable name of the mode, filled out with drm_mode_set_name().
377 */
378 char name[DRM_DISPLAY_MODE_LEN];
379
380 /**
381 * @status:
382 *
383 * Status of the mode, used to filter out modes not supported by the
384 * hardware. See enum &drm_mode_status.
385 */
386 enum drm_mode_status status;
387
388 /**
389 * @picture_aspect_ratio:
390 *
391 * Field for setting the HDMI picture aspect ratio of a mode.
392 */
393 enum hdmi_picture_aspect picture_aspect_ratio;
394
395 };
396
397 /**
398 * DRM_MODE_FMT - printf string for &struct drm_display_mode
399 */
400 #define DRM_MODE_FMT "\"%s\": %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x"
401
402 /**
403 * DRM_MODE_ARG - printf arguments for &struct drm_display_mode
404 * @m: display mode
405 */
406 #define DRM_MODE_ARG(m) \
407 (m)->name, drm_mode_vrefresh(m), (m)->clock, \
408 (m)->hdisplay, (m)->hsync_start, (m)->hsync_end, (m)->htotal, \
409 (m)->vdisplay, (m)->vsync_start, (m)->vsync_end, (m)->vtotal, \
410 (m)->type, (m)->flags
411
412 #define obj_to_mode(x) container_of(x, struct drm_display_mode, base)
413
414 /**
415 * drm_mode_is_stereo - check for stereo mode flags
416 * @mode: drm_display_mode to check
417 *
418 * Returns:
419 * True if the mode is one of the stereo modes (like side-by-side), false if
420 * not.
421 */
drm_mode_is_stereo(const struct drm_display_mode * mode)422 static inline bool drm_mode_is_stereo(const struct drm_display_mode *mode)
423 {
424 return mode->flags & DRM_MODE_FLAG_3D_MASK;
425 }
426
427 struct drm_connector;
428 struct drm_cmdline_mode;
429
430 struct drm_display_mode *drm_mode_create(struct drm_device *dev);
431 void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode);
432 void drm_mode_convert_to_umode(struct drm_mode_modeinfo *out,
433 const struct drm_display_mode *in);
434 int drm_mode_convert_umode(struct drm_device *dev,
435 struct drm_display_mode *out,
436 const struct drm_mode_modeinfo *in);
437 void drm_mode_probed_add(struct drm_connector *connector, struct drm_display_mode *mode);
438 void drm_mode_debug_printmodeline(const struct drm_display_mode *mode);
439 bool drm_mode_is_420_only(const struct drm_display_info *display,
440 const struct drm_display_mode *mode);
441 bool drm_mode_is_420_also(const struct drm_display_info *display,
442 const struct drm_display_mode *mode);
443 bool drm_mode_is_420(const struct drm_display_info *display,
444 const struct drm_display_mode *mode);
445
446 struct drm_display_mode *drm_cvt_mode(struct drm_device *dev,
447 int hdisplay, int vdisplay, int vrefresh,
448 bool reduced, bool interlaced,
449 bool margins);
450 struct drm_display_mode *drm_gtf_mode(struct drm_device *dev,
451 int hdisplay, int vdisplay, int vrefresh,
452 bool interlaced, int margins);
453 struct drm_display_mode *drm_gtf_mode_complex(struct drm_device *dev,
454 int hdisplay, int vdisplay,
455 int vrefresh, bool interlaced,
456 int margins,
457 int GTF_M, int GTF_2C,
458 int GTF_K, int GTF_2J);
459 void drm_display_mode_from_videomode(const struct videomode *vm,
460 struct drm_display_mode *dmode);
461 void drm_display_mode_to_videomode(const struct drm_display_mode *dmode,
462 struct videomode *vm);
463 void drm_bus_flags_from_videomode(const struct videomode *vm, u32 *bus_flags);
464
465 #if defined(CONFIG_OF)
466 int of_get_drm_display_mode(struct device_node *np,
467 struct drm_display_mode *dmode, u32 *bus_flags,
468 int index);
469 #else
of_get_drm_display_mode(struct device_node * np,struct drm_display_mode * dmode,u32 * bus_flags,int index)470 static inline int of_get_drm_display_mode(struct device_node *np,
471 struct drm_display_mode *dmode,
472 u32 *bus_flags, int index)
473 {
474 return -EINVAL;
475 }
476 #endif
477
478 void drm_mode_set_name(struct drm_display_mode *mode);
479 int drm_mode_vrefresh(const struct drm_display_mode *mode);
480 void drm_mode_get_hv_timing(const struct drm_display_mode *mode,
481 int *hdisplay, int *vdisplay);
482
483 void drm_mode_set_crtcinfo(struct drm_display_mode *p,
484 int adjust_flags);
485 void drm_mode_copy(struct drm_display_mode *dst,
486 const struct drm_display_mode *src);
487 struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev,
488 const struct drm_display_mode *mode);
489 bool drm_mode_match(const struct drm_display_mode *mode1,
490 const struct drm_display_mode *mode2,
491 unsigned int match_flags);
492 bool drm_mode_equal(const struct drm_display_mode *mode1,
493 const struct drm_display_mode *mode2);
494 bool drm_mode_equal_no_clocks(const struct drm_display_mode *mode1,
495 const struct drm_display_mode *mode2);
496 bool drm_mode_equal_no_clocks_no_stereo(const struct drm_display_mode *mode1,
497 const struct drm_display_mode *mode2);
498
499 /* for use by the crtc helper probe functions */
500 enum drm_mode_status drm_mode_validate_driver(struct drm_device *dev,
501 const struct drm_display_mode *mode);
502 enum drm_mode_status drm_mode_validate_size(const struct drm_display_mode *mode,
503 int maxX, int maxY);
504 enum drm_mode_status
505 drm_mode_validate_ycbcr420(const struct drm_display_mode *mode,
506 struct drm_connector *connector);
507 void drm_mode_prune_invalid(struct drm_device *dev,
508 struct list_head *mode_list, bool verbose);
509 void drm_mode_sort(struct list_head *mode_list);
510 void drm_connector_list_update(struct drm_connector *connector);
511
512 /* parsing cmdline modes */
513 bool
514 drm_mode_parse_command_line_for_connector(const char *mode_option,
515 const struct drm_connector *connector,
516 struct drm_cmdline_mode *mode);
517 struct drm_display_mode *
518 drm_mode_create_from_cmdline_mode(struct drm_device *dev,
519 struct drm_cmdline_mode *cmd);
520
521 #endif /* __DRM_MODES_H__ */
522