1 menu "Boot options" 2 3 menu "Boot images" 4 5 config ANDROID_BOOT_IMAGE 6 bool "Enable support for Android Boot Images" 7 default y if FASTBOOT 8 help 9 This enables support for booting images which use the Android 10 image format header. 11 12 config FIT 13 bool "Support Flattened Image Tree" 14 select MD5 15 select SHA1 16 help 17 This option allows you to boot the new uImage structure, 18 Flattened Image Tree. FIT is formally a FDT, which can include 19 images of various types (kernel, FDT blob, ramdisk, etc.) 20 in a single blob. To boot this new uImage structure, 21 pass the address of the blob to the "bootm" command. 22 FIT is very flexible, supporting compression, multiple images, 23 multiple configurations, verification through hashing and also 24 verified boot (secure boot using RSA). 25 26 if FIT 27 28 config FIT_EXTERNAL_OFFSET 29 hex "FIT external data offset" 30 default 0x0 31 help 32 This specifies a data offset in fit image. 33 The offset is from data payload offset to the beginning of 34 fit image header. When specifies a offset, specific data 35 could be put in the hole between data payload and fit image 36 header, such as CSF data on i.MX platform. 37 38 config FIT_ENABLE_SHA256_SUPPORT 39 bool "Support SHA256 checksum of FIT image contents" 40 default y 41 select SHA256 42 help 43 Enable this to support SHA256 checksum of FIT image contents. A 44 SHA256 checksum is a 256-bit (32-byte) hash value used to check that 45 the image contents have not been corrupted. 46 47 config FIT_ENABLE_SHA384_SUPPORT 48 bool "Support SHA384 checksum of FIT image contents" 49 default n 50 select SHA384 51 help 52 Enable this to support SHA384 checksum of FIT image contents. A 53 SHA384 checksum is a 384-bit (48-byte) hash value used to check that 54 the image contents have not been corrupted. Use this for the highest 55 security. 56 57 config FIT_ENABLE_SHA512_SUPPORT 58 bool "Support SHA512 checksum of FIT image contents" 59 default n 60 select SHA512 61 help 62 Enable this to support SHA512 checksum of FIT image contents. A 63 SHA512 checksum is a 512-bit (64-byte) hash value used to check that 64 the image contents have not been corrupted. 65 66 config FIT_FULL_CHECK 67 bool "Do a full check of the FIT before using it" 68 default y 69 help 70 Enable this do a full check of the FIT to make sure it is valid. This 71 helps to protect against carefully crafted FITs which take advantage 72 of bugs or omissions in the code. This includes a bad structure, 73 multiple root nodes and the like. 74 75 config FIT_SIGNATURE 76 bool "Enable signature verification of FIT uImages" 77 depends on DM 78 select HASH 79 select RSA 80 select RSA_VERIFY 81 select IMAGE_SIGN_INFO 82 select FIT_FULL_CHECK 83 help 84 This option enables signature verification of FIT uImages, 85 using a hash signed and verified using RSA. If 86 CONFIG_SHA_PROG_HW_ACCEL is defined, i.e support for progressive 87 hashing is available using hardware, then the RSA library will use 88 it. See doc/uImage.FIT/signature.txt for more details. 89 90 WARNING: When relying on signed FIT images with a required signature 91 check the legacy image format is disabled by default, so that 92 unsigned images cannot be loaded. If a board needs the legacy image 93 format support in this case, enable it using 94 CONFIG_LEGACY_IMAGE_FORMAT. 95 96 config FIT_SIGNATURE_MAX_SIZE 97 hex "Max size of signed FIT structures" 98 depends on FIT_SIGNATURE 99 default 0x10000000 100 help 101 This option sets a max size in bytes for verified FIT uImages. 102 A sane value of 256MB protects corrupted DTB structures from overlapping 103 device memory. Assure this size does not extend past expected storage 104 space. 105 106 config FIT_ENABLE_RSASSA_PSS_SUPPORT 107 bool "Support rsassa-pss signature scheme of FIT image contents" 108 depends on FIT_SIGNATURE 109 default n 110 help 111 Enable this to support the pss padding algorithm as described 112 in the rfc8017 (https://tools.ietf.org/html/rfc8017). 113 114 config FIT_CIPHER 115 bool "Enable ciphering data in a FIT uImages" 116 depends on DM 117 select AES 118 help 119 Enable the feature of data ciphering/unciphering in the tool mkimage 120 and in the u-boot support of the FIT image. 121 122 config FIT_VERBOSE 123 bool "Show verbose messages when FIT images fail" 124 help 125 Generally a system will have valid FIT images so debug messages 126 are a waste of code space. If you are debugging your images then 127 you can enable this option to get more verbose information about 128 failures. 129 130 config FIT_BEST_MATCH 131 bool "Select the best match for the kernel device tree" 132 help 133 When no configuration is explicitly selected, default to the 134 one whose fdt's compatibility field best matches that of 135 U-Boot itself. A match is considered "best" if it matches the 136 most specific compatibility entry of U-Boot's fdt's root node. 137 The order of entries in the configuration's fdt is ignored. 138 139 config FIT_IMAGE_POST_PROCESS 140 bool "Enable post-processing of FIT artifacts after loading by U-Boot" 141 depends on TI_SECURE_DEVICE || SOCFPGA_SECURE_VAB_AUTH 142 help 143 Allows doing any sort of manipulation to blobs after they got extracted 144 from FIT images like stripping off headers or modifying the size of the 145 blob, verification, authentication, decryption etc. in a platform or 146 board specific way. In order to use this feature a platform or board- 147 specific implementation of board_fit_image_post_process() must be 148 provided. Also, anything done during this post-processing step would 149 need to be comprehended in how the images were prepared before being 150 injected into the FIT creation (i.e. the blobs would have been pre- 151 processed before being added to the FIT image). 152 153 config FIT_PRINT 154 bool "Support FIT printing" 155 default y 156 help 157 Support printing the content of the fitImage in a verbose manner. 158 159 if SPL 160 161 config SPL_FIT 162 bool "Support Flattened Image Tree within SPL" 163 depends on SPL 164 select SPL_OF_LIBFDT 165 166 config SPL_FIT_PRINT 167 bool "Support FIT printing within SPL" 168 depends on SPL_FIT 169 help 170 Support printing the content of the fitImage in a verbose manner in SPL. 171 172 config SPL_FIT_FULL_CHECK 173 bool "Do a full check of the FIT before using it" 174 help 175 Enable this do a full check of the FIT to make sure it is valid. This 176 helps to protect against carefully crafted FITs which take advantage 177 of bugs or omissions in the code. This includes a bad structure, 178 multiple root nodes and the like. 179 180 181 config SPL_FIT_SIGNATURE 182 bool "Enable signature verification of FIT firmware within SPL" 183 depends on SPL_DM 184 depends on SPL_LOAD_FIT || SPL_LOAD_FIT_FULL 185 select FIT_SIGNATURE 186 select SPL_FIT 187 select SPL_CRYPTO_SUPPORT 188 select SPL_HASH_SUPPORT 189 select SPL_RSA 190 select SPL_RSA_VERIFY 191 select SPL_IMAGE_SIGN_INFO 192 select SPL_FIT_FULL_CHECK 193 194 config SPL_LOAD_FIT 195 bool "Enable SPL loading U-Boot as a FIT (basic fitImage features)" 196 select SPL_FIT 197 help 198 Normally with the SPL framework a legacy image is generated as part 199 of the build. This contains U-Boot along with information as to 200 where it should be loaded. This option instead enables generation 201 of a FIT (Flat Image Tree) which provides more flexibility. In 202 particular it can handle selecting from multiple device tree 203 and passing the correct one to U-Boot. 204 205 config SPL_LOAD_FIT_ADDRESS 206 hex "load address of fit image" 207 depends on SPL_LOAD_FIT 208 default 0x0 209 help 210 Specify the load address of the fit image that will be loaded 211 by SPL. 212 213 config SPL_LOAD_FIT_APPLY_OVERLAY 214 bool "Enable SPL applying DT overlays from FIT" 215 depends on SPL_LOAD_FIT 216 select OF_LIBFDT_OVERLAY 217 help 218 The device tree is loaded from the FIT image. Allow the SPL is to 219 also load device-tree overlays from the FIT image an apply them 220 over the device tree. 221 222 config SPL_LOAD_FIT_APPLY_OVERLAY_BUF_SZ 223 depends on SPL_LOAD_FIT_APPLY_OVERLAY 224 default 0x10000 225 hex "size of temporary buffer used to load the overlays" 226 help 227 The size of the area where the overlays will be loaded and 228 uncompress. Must be at least as large as biggest overlay 229 (uncompressed) 230 231 config SPL_LOAD_FIT_FULL 232 bool "Enable SPL loading U-Boot as a FIT (full fitImage features)" 233 select SPL_FIT 234 help 235 Normally with the SPL framework a legacy image is generated as part 236 of the build. This contains U-Boot along with information as to 237 where it should be loaded. This option instead enables generation 238 of a FIT (Flat Image Tree) which provides more flexibility. In 239 particular it can handle selecting from multiple device tree 240 and passing the correct one to U-Boot. 241 242 config SPL_FIT_IMAGE_POST_PROCESS 243 bool "Enable post-processing of FIT artifacts after loading by the SPL" 244 depends on SPL_LOAD_FIT 245 help 246 Allows doing any sort of manipulation to blobs after they got extracted 247 from the U-Boot FIT image like stripping off headers or modifying the 248 size of the blob, verification, authentication, decryption etc. in a 249 platform or board specific way. In order to use this feature a platform 250 or board-specific implementation of board_fit_image_post_process() must 251 be provided. Also, anything done during this post-processing step would 252 need to be comprehended in how the images were prepared before being 253 injected into the FIT creation (i.e. the blobs would have been pre- 254 processed before being added to the FIT image). 255 256 config SPL_FIT_SOURCE 257 string ".its source file for U-Boot FIT image" 258 depends on SPL_FIT 259 help 260 Specifies a (platform specific) FIT source file to generate the 261 U-Boot FIT image. This could specify further image to load and/or 262 execute. 263 264 config USE_SPL_FIT_GENERATOR 265 bool "Use a script to generate the .its script" 266 default y if SPL_FIT && !ARCH_SUNXI 267 268 config SPL_FIT_GENERATOR 269 string ".its file generator script for U-Boot FIT image" 270 depends on USE_SPL_FIT_GENERATOR 271 default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP 272 default "arch/arm/mach-zynqmp/mkimage_fit_atf.sh" if SPL_LOAD_FIT && ARCH_ZYNQMP 273 default "arch/riscv/lib/mkimage_fit_opensbi.sh" if SPL_LOAD_FIT && RISCV 274 help 275 Specifies a (platform specific) script file to generate the FIT 276 source file used to build the U-Boot FIT image file. This gets 277 passed a list of supported device tree file stub names to 278 include in the generated image. 279 280 endif # SPL 281 282 endif # FIT 283 284 config LEGACY_IMAGE_FORMAT 285 bool "Enable support for the legacy image format" 286 default y if !FIT_SIGNATURE 287 help 288 This option enables the legacy image format. It is enabled by 289 default for backward compatibility, unless FIT_SIGNATURE is 290 set where it is disabled so that unsigned images cannot be 291 loaded. If a board needs the legacy image format support in this 292 case, enable it here. 293 294 config SUPPORT_RAW_INITRD 295 bool "Enable raw initrd images" 296 help 297 Note, defining the SUPPORT_RAW_INITRD allows user to supply 298 kernel with raw initrd images. The syntax is slightly different, the 299 address of the initrd must be augmented by it's size, in the following 300 format: "<initrd address>:<initrd size>". 301 302 config OF_BOARD_SETUP 303 bool "Set up board-specific details in device tree before boot" 304 depends on OF_LIBFDT 305 help 306 This causes U-Boot to call ft_board_setup() before booting into 307 the Operating System. This function can set up various 308 board-specific information in the device tree for use by the OS. 309 The device tree is then passed to the OS. 310 311 config OF_SYSTEM_SETUP 312 bool "Set up system-specific details in device tree before boot" 313 depends on OF_LIBFDT 314 help 315 This causes U-Boot to call ft_system_setup() before booting into 316 the Operating System. This function can set up various 317 system-specific information in the device tree for use by the OS. 318 The device tree is then passed to the OS. 319 320 config OF_STDOUT_VIA_ALIAS 321 bool "Update the device-tree stdout alias from U-Boot" 322 depends on OF_LIBFDT 323 help 324 This uses U-Boot's serial alias from the aliases node to update 325 the device tree passed to the OS. The "linux,stdout-path" property 326 in the chosen node is set to point to the correct serial node. 327 This option currently references CONFIG_CONS_INDEX, which is 328 incorrect when used with device tree as this option does not 329 exist / should not be used. 330 331 config SYS_EXTRA_OPTIONS 332 string "Extra Options (DEPRECATED)" 333 help 334 The old configuration infrastructure (= mkconfig + boards.cfg) 335 provided the extra options field. If you have something like 336 "HAS_BAR,BAZ=64", the optional options 337 #define CONFIG_HAS 338 #define CONFIG_BAZ 64 339 will be defined in include/config.h. 340 This option was prepared for the smooth migration from the old 341 configuration to Kconfig. Since this option will be removed sometime, 342 new boards should not use this option. 343 344 config HAVE_SYS_TEXT_BASE 345 bool 346 depends on !NIOS2 && !XTENSA 347 depends on !EFI_APP 348 default y 349 350 config SYS_TEXT_BASE 351 depends on HAVE_SYS_TEXT_BASE 352 default 0x80800000 if ARCH_OMAP2PLUS || ARCH_K3 353 default 0x4a000000 if ARCH_SUNXI && !MACH_SUN9I && !MACH_SUN8I_V3S 354 default 0x2a000000 if ARCH_SUNXI && MACH_SUN9I 355 default 0x42e00000 if ARCH_SUNXI && MACH_SUN8I_V3S 356 hex "Text Base" 357 help 358 The address in memory that U-Boot will be running from, initially. 359 360 config SYS_CLK_FREQ 361 depends on ARC || ARCH_SUNXI || MPC83xx 362 int "CPU clock frequency" 363 help 364 TODO: Move CONFIG_SYS_CLK_FREQ for all the architecture 365 366 config ARCH_FIXUP_FDT_MEMORY 367 bool "Enable arch_fixup_memory_banks() call" 368 default y 369 help 370 Enable FDT memory map syncup before OS boot. This feature can be 371 used for booting OS with different memory setup where the part of 372 the memory location should be used for different purpose. 373 374 config CHROMEOS 375 bool "Support booting Chrome OS" 376 help 377 Chrome OS requires U-Boot to set up a table indicating the boot mode 378 (e.g. Developer mode) and a few other things. Enable this if you are 379 booting on a Chromebook to avoid getting an error about an invalid 380 firmware ID. 381 382 config CHROMEOS_VBOOT 383 bool "Support Chrome OS verified boot" 384 help 385 This is intended to enable the full Chrome OS verified boot support 386 in U-Boot. It is not actually implemented in the U-Boot source code 387 at present, so this option is always set to 'n'. It allows 388 distinguishing between booting Chrome OS in a basic way (developer 389 mode) and a full boot. 390 391 endmenu # Boot images 392 393 menu "Boot timing" 394 395 config BOOTSTAGE 396 bool "Boot timing and reporting" 397 help 398 Enable recording of boot time while booting. To use it, insert 399 calls to bootstage_mark() with a suitable BOOTSTAGE_ID from 400 bootstage.h. Only a single entry is recorded for each ID. You can 401 give the entry a name with bootstage_mark_name(). You can also 402 record elapsed time in a particular stage using bootstage_start() 403 before starting and bootstage_accum() when finished. Bootstage will 404 add up all the accumulated time and report it. 405 406 Normally, IDs are defined in bootstage.h but a small number of 407 additional 'user' IDs can be used by passing BOOTSTAGE_ID_ALLOC 408 as the ID. 409 410 Calls to show_boot_progress() will also result in log entries but 411 these will not have names. 412 413 config SPL_BOOTSTAGE 414 bool "Boot timing and reported in SPL" 415 depends on BOOTSTAGE 416 help 417 Enable recording of boot time in SPL. To make this visible to U-Boot 418 proper, enable BOOTSTAGE_STASH as well. This will stash the timing 419 information when SPL finishes and load it when U-Boot proper starts 420 up. 421 422 config TPL_BOOTSTAGE 423 bool "Boot timing and reported in TPL" 424 depends on BOOTSTAGE 425 help 426 Enable recording of boot time in SPL. To make this visible to U-Boot 427 proper, enable BOOTSTAGE_STASH as well. This will stash the timing 428 information when TPL finishes and load it when U-Boot proper starts 429 up. 430 431 config BOOTSTAGE_REPORT 432 bool "Display a detailed boot timing report before booting the OS" 433 depends on BOOTSTAGE 434 help 435 Enable output of a boot time report just before the OS is booted. 436 This shows how long it took U-Boot to go through each stage of the 437 boot process. The report looks something like this: 438 439 Timer summary in microseconds: 440 Mark Elapsed Stage 441 0 0 reset 442 3,575,678 3,575,678 board_init_f start 443 3,575,695 17 arch_cpu_init A9 444 3,575,777 82 arch_cpu_init done 445 3,659,598 83,821 board_init_r start 446 3,910,375 250,777 main_loop 447 29,916,167 26,005,792 bootm_start 448 30,361,327 445,160 start_kernel 449 450 config BOOTSTAGE_RECORD_COUNT 451 int "Number of boot stage records to store" 452 depends on BOOTSTAGE 453 default 30 454 help 455 This is the size of the bootstage record list and is the maximum 456 number of bootstage records that can be recorded. 457 458 config SPL_BOOTSTAGE_RECORD_COUNT 459 int "Number of boot stage records to store for SPL" 460 depends on SPL_BOOTSTAGE 461 default 5 462 help 463 This is the size of the bootstage record list and is the maximum 464 number of bootstage records that can be recorded. 465 466 config TPL_BOOTSTAGE_RECORD_COUNT 467 int "Number of boot stage records to store for TPL" 468 depends on TPL_BOOTSTAGE 469 default 5 470 help 471 This is the size of the bootstage record list and is the maximum 472 number of bootstage records that can be recorded. 473 474 config BOOTSTAGE_FDT 475 bool "Store boot timing information in the OS device tree" 476 depends on BOOTSTAGE 477 help 478 Stash the bootstage information in the FDT. A root 'bootstage' 479 node is created with each bootstage id as a child. Each child 480 has a 'name' property and either 'mark' containing the 481 mark time in microseconds, or 'accum' containing the 482 accumulated time for that bootstage id in microseconds. 483 For example: 484 485 bootstage { 486 154 { 487 name = "board_init_f"; 488 mark = <3575678>; 489 }; 490 170 { 491 name = "lcd"; 492 accum = <33482>; 493 }; 494 }; 495 496 Code in the Linux kernel can find this in /proc/devicetree. 497 498 config BOOTSTAGE_STASH 499 bool "Stash the boot timing information in memory before booting OS" 500 depends on BOOTSTAGE 501 help 502 Some OSes do not support device tree. Bootstage can instead write 503 the boot timing information in a binary format at a given address. 504 This happens through a call to bootstage_stash(), typically in 505 the CPU's cleanup_before_linux() function. You can use the 506 'bootstage stash' and 'bootstage unstash' commands to do this on 507 the command line. 508 509 config BOOTSTAGE_STASH_ADDR 510 hex "Address to stash boot timing information" 511 default 0 512 help 513 Provide an address which will not be overwritten by the OS when it 514 starts, so that it can read this information when ready. 515 516 config BOOTSTAGE_STASH_SIZE 517 hex "Size of boot timing stash region" 518 default 0x1000 519 help 520 This should be large enough to hold the bootstage stash. A value of 521 4096 (4KiB) is normally plenty. 522 523 config SHOW_BOOT_PROGRESS 524 bool "Show boot progress in a board-specific manner" 525 help 526 Defining this option allows to add some board-specific code (calling 527 a user-provided function show_boot_progress(int) that enables you to 528 show the system's boot progress on some display (for example, some 529 LEDs) on your board. At the moment, the following checkpoints are 530 implemented: 531 532 Legacy uImage format: 533 534 Arg Where When 535 1 common/cmd_bootm.c before attempting to boot an image 536 -1 common/cmd_bootm.c Image header has bad magic number 537 2 common/cmd_bootm.c Image header has correct magic number 538 -2 common/cmd_bootm.c Image header has bad checksum 539 3 common/cmd_bootm.c Image header has correct checksum 540 -3 common/cmd_bootm.c Image data has bad checksum 541 4 common/cmd_bootm.c Image data has correct checksum 542 -4 common/cmd_bootm.c Image is for unsupported architecture 543 5 common/cmd_bootm.c Architecture check OK 544 -5 common/cmd_bootm.c Wrong Image Type (not kernel, multi) 545 6 common/cmd_bootm.c Image Type check OK 546 -6 common/cmd_bootm.c gunzip uncompression error 547 -7 common/cmd_bootm.c Unimplemented compression type 548 7 common/cmd_bootm.c Uncompression OK 549 8 common/cmd_bootm.c No uncompress/copy overwrite error 550 -9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX) 551 552 9 common/image.c Start initial ramdisk verification 553 -10 common/image.c Ramdisk header has bad magic number 554 -11 common/image.c Ramdisk header has bad checksum 555 10 common/image.c Ramdisk header is OK 556 -12 common/image.c Ramdisk data has bad checksum 557 11 common/image.c Ramdisk data has correct checksum 558 12 common/image.c Ramdisk verification complete, start loading 559 -13 common/image.c Wrong Image Type (not PPC Linux ramdisk) 560 13 common/image.c Start multifile image verification 561 14 common/image.c No initial ramdisk, no multifile, continue. 562 563 15 arch/<arch>/lib/bootm.c All preparation done, transferring control to OS 564 565 -30 arch/powerpc/lib/board.c Fatal error, hang the system 566 -31 post/post.c POST test failed, detected by post_output_backlog() 567 -32 post/post.c POST test failed, detected by post_run_single() 568 569 34 common/cmd_doc.c before loading a Image from a DOC device 570 -35 common/cmd_doc.c Bad usage of "doc" command 571 35 common/cmd_doc.c correct usage of "doc" command 572 -36 common/cmd_doc.c No boot device 573 36 common/cmd_doc.c correct boot device 574 -37 common/cmd_doc.c Unknown Chip ID on boot device 575 37 common/cmd_doc.c correct chip ID found, device available 576 -38 common/cmd_doc.c Read Error on boot device 577 38 common/cmd_doc.c reading Image header from DOC device OK 578 -39 common/cmd_doc.c Image header has bad magic number 579 39 common/cmd_doc.c Image header has correct magic number 580 -40 common/cmd_doc.c Error reading Image from DOC device 581 40 common/cmd_doc.c Image header has correct magic number 582 41 common/cmd_ide.c before loading a Image from a IDE device 583 -42 common/cmd_ide.c Bad usage of "ide" command 584 42 common/cmd_ide.c correct usage of "ide" command 585 -43 common/cmd_ide.c No boot device 586 43 common/cmd_ide.c boot device found 587 -44 common/cmd_ide.c Device not available 588 44 common/cmd_ide.c Device available 589 -45 common/cmd_ide.c wrong partition selected 590 45 common/cmd_ide.c partition selected 591 -46 common/cmd_ide.c Unknown partition table 592 46 common/cmd_ide.c valid partition table found 593 -47 common/cmd_ide.c Invalid partition type 594 47 common/cmd_ide.c correct partition type 595 -48 common/cmd_ide.c Error reading Image Header on boot device 596 48 common/cmd_ide.c reading Image Header from IDE device OK 597 -49 common/cmd_ide.c Image header has bad magic number 598 49 common/cmd_ide.c Image header has correct magic number 599 -50 common/cmd_ide.c Image header has bad checksum 600 50 common/cmd_ide.c Image header has correct checksum 601 -51 common/cmd_ide.c Error reading Image from IDE device 602 51 common/cmd_ide.c reading Image from IDE device OK 603 52 common/cmd_nand.c before loading a Image from a NAND device 604 -53 common/cmd_nand.c Bad usage of "nand" command 605 53 common/cmd_nand.c correct usage of "nand" command 606 -54 common/cmd_nand.c No boot device 607 54 common/cmd_nand.c boot device found 608 -55 common/cmd_nand.c Unknown Chip ID on boot device 609 55 common/cmd_nand.c correct chip ID found, device available 610 -56 common/cmd_nand.c Error reading Image Header on boot device 611 56 common/cmd_nand.c reading Image Header from NAND device OK 612 -57 common/cmd_nand.c Image header has bad magic number 613 57 common/cmd_nand.c Image header has correct magic number 614 -58 common/cmd_nand.c Error reading Image from NAND device 615 58 common/cmd_nand.c reading Image from NAND device OK 616 617 -60 common/env_common.c Environment has a bad CRC, using default 618 619 64 net/eth.c starting with Ethernet configuration. 620 -64 net/eth.c no Ethernet found. 621 65 net/eth.c Ethernet found. 622 623 -80 common/cmd_net.c usage wrong 624 80 common/cmd_net.c before calling net_loop() 625 -81 common/cmd_net.c some error in net_loop() occurred 626 81 common/cmd_net.c net_loop() back without error 627 -82 common/cmd_net.c size == 0 (File with size 0 loaded) 628 82 common/cmd_net.c trying automatic boot 629 83 common/cmd_net.c running "source" command 630 -83 common/cmd_net.c some error in automatic boot or "source" command 631 84 common/cmd_net.c end without errors 632 633 FIT uImage format: 634 635 Arg Where When 636 100 common/cmd_bootm.c Kernel FIT Image has correct format 637 -100 common/cmd_bootm.c Kernel FIT Image has incorrect format 638 101 common/cmd_bootm.c No Kernel subimage unit name, using configuration 639 -101 common/cmd_bootm.c Can't get configuration for kernel subimage 640 102 common/cmd_bootm.c Kernel unit name specified 641 -103 common/cmd_bootm.c Can't get kernel subimage node offset 642 103 common/cmd_bootm.c Found configuration node 643 104 common/cmd_bootm.c Got kernel subimage node offset 644 -104 common/cmd_bootm.c Kernel subimage hash verification failed 645 105 common/cmd_bootm.c Kernel subimage hash verification OK 646 -105 common/cmd_bootm.c Kernel subimage is for unsupported architecture 647 106 common/cmd_bootm.c Architecture check OK 648 -106 common/cmd_bootm.c Kernel subimage has wrong type 649 107 common/cmd_bootm.c Kernel subimage type OK 650 -107 common/cmd_bootm.c Can't get kernel subimage data/size 651 108 common/cmd_bootm.c Got kernel subimage data/size 652 -108 common/cmd_bootm.c Wrong image type (not legacy, FIT) 653 -109 common/cmd_bootm.c Can't get kernel subimage type 654 -110 common/cmd_bootm.c Can't get kernel subimage comp 655 -111 common/cmd_bootm.c Can't get kernel subimage os 656 -112 common/cmd_bootm.c Can't get kernel subimage load address 657 -113 common/cmd_bootm.c Image uncompress/copy overwrite error 658 659 120 common/image.c Start initial ramdisk verification 660 -120 common/image.c Ramdisk FIT image has incorrect format 661 121 common/image.c Ramdisk FIT image has correct format 662 122 common/image.c No ramdisk subimage unit name, using configuration 663 -122 common/image.c Can't get configuration for ramdisk subimage 664 123 common/image.c Ramdisk unit name specified 665 -124 common/image.c Can't get ramdisk subimage node offset 666 125 common/image.c Got ramdisk subimage node offset 667 -125 common/image.c Ramdisk subimage hash verification failed 668 126 common/image.c Ramdisk subimage hash verification OK 669 -126 common/image.c Ramdisk subimage for unsupported architecture 670 127 common/image.c Architecture check OK 671 -127 common/image.c Can't get ramdisk subimage data/size 672 128 common/image.c Got ramdisk subimage data/size 673 129 common/image.c Can't get ramdisk load address 674 -129 common/image.c Got ramdisk load address 675 676 -130 common/cmd_doc.c Incorrect FIT image format 677 131 common/cmd_doc.c FIT image format OK 678 679 -140 common/cmd_ide.c Incorrect FIT image format 680 141 common/cmd_ide.c FIT image format OK 681 682 -150 common/cmd_nand.c Incorrect FIT image format 683 151 common/cmd_nand.c FIT image format OK 684 685 endmenu 686 687 menu "Boot media" 688 689 config NOR_BOOT 690 bool "Support for booting from NOR flash" 691 depends on NOR 692 help 693 Enabling this will make a U-Boot binary that is capable of being 694 booted via NOR. In this case we will enable certain pinmux early 695 as the ROM only partially sets up pinmux. We also default to using 696 NOR for environment. 697 698 config NAND_BOOT 699 bool "Support for booting from NAND flash" 700 default n 701 imply MTD_RAW_NAND 702 help 703 Enabling this will make a U-Boot binary that is capable of being 704 booted via NAND flash. This is not a must, some SoCs need this, 705 some not. 706 707 config ONENAND_BOOT 708 bool "Support for booting from ONENAND" 709 default n 710 imply MTD_RAW_NAND 711 help 712 Enabling this will make a U-Boot binary that is capable of being 713 booted via ONENAND. This is not a must, some SoCs need this, 714 some not. 715 716 config QSPI_BOOT 717 bool "Support for booting from QSPI flash" 718 default n 719 help 720 Enabling this will make a U-Boot binary that is capable of being 721 booted via QSPI flash. This is not a must, some SoCs need this, 722 some not. 723 724 config SATA_BOOT 725 bool "Support for booting from SATA" 726 default n 727 help 728 Enabling this will make a U-Boot binary that is capable of being 729 booted via SATA. This is not a must, some SoCs need this, 730 some not. 731 732 config SD_BOOT 733 bool "Support for booting from SD/EMMC" 734 default n 735 help 736 Enabling this will make a U-Boot binary that is capable of being 737 booted via SD/EMMC. This is not a must, some SoCs need this, 738 some not. 739 740 config SPI_BOOT 741 bool "Support for booting from SPI flash" 742 default n 743 help 744 Enabling this will make a U-Boot binary that is capable of being 745 booted via SPI flash. This is not a must, some SoCs need this, 746 some not. 747 748 endmenu 749 750 menu "Autoboot options" 751 752 config AUTOBOOT 753 bool "Autoboot" 754 default y 755 help 756 This enables the autoboot. See doc/README.autoboot for detail. 757 758 config BOOTDELAY 759 int "delay in seconds before automatically booting" 760 default 2 761 depends on AUTOBOOT 762 help 763 Delay before automatically running bootcmd; 764 set to 0 to autoboot with no delay, but you can stop it by key input. 765 set to -1 to disable autoboot. 766 set to -2 to autoboot with no delay and not check for abort 767 768 If this value is >= 0 then it is also used for the default delay 769 before starting the default entry in bootmenu. If it is < 0 then 770 a default value of 10s is used. 771 772 See doc/README.autoboot for details. 773 774 config AUTOBOOT_KEYED 775 bool "Stop autobooting via specific input key / string" 776 default n 777 help 778 This option enables stopping (aborting) of the automatic 779 boot feature only by issuing a specific input key or 780 string. If not enabled, any input key will abort the 781 U-Boot automatic booting process and bring the device 782 to the U-Boot prompt for user input. 783 784 config AUTOBOOT_PROMPT 785 string "Autoboot stop prompt" 786 depends on AUTOBOOT_KEYED 787 default "Autoboot in %d seconds\\n" 788 help 789 This string is displayed before the boot delay selected by 790 CONFIG_BOOTDELAY starts. If it is not defined there is no 791 output indicating that autoboot is in progress. 792 793 Note that this define is used as the (only) argument to a 794 printf() call, so it may contain '%' format specifications, 795 provided that it also includes, sepearated by commas exactly 796 like in a printf statement, the required arguments. It is 797 the responsibility of the user to select only such arguments 798 that are valid in the given context. 799 800 config AUTOBOOT_ENCRYPTION 801 bool "Enable encryption in autoboot stopping" 802 depends on AUTOBOOT_KEYED 803 help 804 This option allows a string to be entered into U-Boot to stop the 805 autoboot. The string itself is hashed and compared against the hash 806 in the environment variable 'bootstopkeysha256'. If it matches then 807 boot stops and a command-line prompt is presented. 808 809 This provides a way to ship a secure production device which can also 810 be accessed at the U-Boot command line. 811 812 config AUTOBOOT_DELAY_STR 813 string "Delay autobooting via specific input key / string" 814 depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION 815 help 816 This option delays the automatic boot feature by issuing 817 a specific input key or string. If CONFIG_AUTOBOOT_DELAY_STR 818 or the environment variable "bootdelaykey" is specified 819 and this string is received from console input before 820 autoboot starts booting, U-Boot gives a command prompt. The 821 U-Boot prompt will time out if CONFIG_BOOT_RETRY_TIME is 822 used, otherwise it never times out. 823 824 config AUTOBOOT_STOP_STR 825 string "Stop autobooting via specific input key / string" 826 depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION 827 help 828 This option enables stopping (aborting) of the automatic 829 boot feature only by issuing a specific input key or 830 string. If CONFIG_AUTOBOOT_STOP_STR or the environment 831 variable "bootstopkey" is specified and this string is 832 received from console input before autoboot starts booting, 833 U-Boot gives a command prompt. The U-Boot prompt never 834 times out, even if CONFIG_BOOT_RETRY_TIME is used. 835 836 config AUTOBOOT_KEYED_CTRLC 837 bool "Enable Ctrl-C autoboot interruption" 838 depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION 839 default n 840 help 841 This option allows for the boot sequence to be interrupted 842 by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey". 843 Setting this variable provides an escape sequence from the 844 limited "password" strings. 845 846 config AUTOBOOT_STOP_STR_SHA256 847 string "Stop autobooting via SHA256 encrypted password" 848 depends on AUTOBOOT_KEYED && AUTOBOOT_ENCRYPTION 849 help 850 This option adds the feature to only stop the autobooting, 851 and therefore boot into the U-Boot prompt, when the input 852 string / password matches a values that is encypted via 853 a SHA256 hash and saved in the environment variable 854 "bootstopkeysha256". If the value in that variable 855 includes a ":", the portion prior to the ":" will be treated 856 as a salt value. 857 858 config AUTOBOOT_USE_MENUKEY 859 bool "Allow a specify key to run a menu from the environment" 860 depends on !AUTOBOOT_KEYED 861 help 862 If a specific key is pressed to stop autoboot, then the commands in 863 the environment variable 'menucmd' are executed before boot starts. 864 865 config AUTOBOOT_MENUKEY 866 int "ASCII value of boot key to show a menu" 867 default 0 868 depends on AUTOBOOT_USE_MENUKEY 869 help 870 If this key is pressed to stop autoboot, then the commands in the 871 environment variable 'menucmd' will be executed before boot starts. 872 For example, 33 means "!" in ASCII, so pressing ! at boot would take 873 this action. 874 875 config AUTOBOOT_MENU_SHOW 876 bool "Show a menu on boot" 877 depends on CMD_BOOTMENU 878 help 879 This enables the boot menu, controlled by environment variables 880 defined by the board. The menu starts after running the 'preboot' 881 environmnent variable (if enabled) and before handling the boot delay. 882 See README.bootmenu for more details. 883 884 endmenu 885 886 config USE_BOOTARGS 887 bool "Enable boot arguments" 888 help 889 Provide boot arguments to bootm command. Boot arguments are specified 890 in CONFIG_BOOTARGS option. Enable this option to be able to specify 891 CONFIG_BOOTARGS string. If this option is disabled, CONFIG_BOOTARGS 892 will be undefined and won't take any space in U-Boot image. 893 894 config BOOTARGS 895 string "Boot arguments" 896 depends on USE_BOOTARGS && !USE_DEFAULT_ENV_FILE 897 help 898 This can be used to pass arguments to the bootm command. The value of 899 CONFIG_BOOTARGS goes into the environment value "bootargs". Note that 900 this value will also override the "chosen" node in FDT blob. 901 902 config BOOTARGS_SUBST 903 bool "Support substituting strings in boot arguments" 904 help 905 This allows substituting string values in the boot arguments. These 906 are applied after the commandline has been built. 907 908 One use for this is to insert the root-disk UUID into the command 909 line where bootargs contains "root=${uuid}" 910 911 setenv bootargs "console= root=${uuid}" 912 # Set the 'uuid' environment variable 913 part uuid mmc 2:2 uuid 914 915 # Command-line substitution will put the real uuid into the 916 # kernel command line 917 bootm 918 919 config USE_BOOTCOMMAND 920 bool "Enable a default value for bootcmd" 921 help 922 Provide a default value for the bootcmd entry in the environment. If 923 autoboot is enabled this is what will be run automatically. Enable 924 this option to be able to specify CONFIG_BOOTCOMMAND as a string. If 925 this option is disabled, CONFIG_BOOTCOMMAND will be undefined and 926 won't take any space in U-Boot image. 927 928 config BOOTCOMMAND 929 string "bootcmd value" 930 depends on USE_BOOTCOMMAND && !USE_DEFAULT_ENV_FILE 931 default "run distro_bootcmd" if DISTRO_DEFAULTS 932 help 933 This is the string of commands that will be used as bootcmd and if 934 AUTOBOOT is set, automatically run. 935 936 config USE_PREBOOT 937 bool "Enable preboot" 938 help 939 When this option is enabled, the existence of the environment 940 variable "preboot" will be checked immediately before starting the 941 CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp. 942 entering interactive mode. 943 944 This feature is especially useful when "preboot" is automatically 945 generated or modified. For example, the boot code can modify the 946 "preboot" when a user holds down a certain combination of keys. 947 948 config PREBOOT 949 string "preboot default value" 950 depends on USE_PREBOOT && !USE_DEFAULT_ENV_FILE 951 default "usb start" if USB_KEYBOARD 952 default "" 953 help 954 This is the default of "preboot" environment variable. 955 956 config DEFAULT_FDT_FILE 957 string "Default fdt file" 958 help 959 This option is used to set the default fdt file to boot OS. 960 961 endmenu # Booting 962