1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * MUSB OTG driver register defines
4  *
5  * Copyright 2005 Mentor Graphics Corporation
6  * Copyright (C) 2005-2006 by Texas Instruments
7  * Copyright (C) 2006-2007 Nokia Corporation
8  */
9 
10 #ifndef __MUSB_REGS_H__
11 #define __MUSB_REGS_H__
12 
13 #define MUSB_EP0_FIFOSIZE	64	/* This is non-configurable */
14 
15 /*
16  * MUSB Register bits
17  */
18 
19 /* POWER */
20 #define MUSB_POWER_ISOUPDATE	0x80
21 #define MUSB_POWER_SOFTCONN	0x40
22 #define MUSB_POWER_HSENAB	0x20
23 #define MUSB_POWER_HSMODE	0x10
24 #define MUSB_POWER_RESET	0x08
25 #define MUSB_POWER_RESUME	0x04
26 #define MUSB_POWER_SUSPENDM	0x02
27 #define MUSB_POWER_ENSUSPEND	0x01
28 
29 /* INTRUSB */
30 #define MUSB_INTR_SUSPEND	0x01
31 #define MUSB_INTR_RESUME	0x02
32 #define MUSB_INTR_RESET		0x04
33 #define MUSB_INTR_BABBLE	0x04
34 #define MUSB_INTR_SOF		0x08
35 #define MUSB_INTR_CONNECT	0x10
36 #define MUSB_INTR_DISCONNECT	0x20
37 #define MUSB_INTR_SESSREQ	0x40
38 #define MUSB_INTR_VBUSERROR	0x80	/* For SESSION end */
39 
40 /* DEVCTL */
41 #define MUSB_DEVCTL_BDEVICE	0x80
42 #define MUSB_DEVCTL_FSDEV	0x40
43 #define MUSB_DEVCTL_LSDEV	0x20
44 #define MUSB_DEVCTL_VBUS	0x18
45 #define MUSB_DEVCTL_VBUS_SHIFT	3
46 #define MUSB_DEVCTL_HM		0x04
47 #define MUSB_DEVCTL_HR		0x02
48 #define MUSB_DEVCTL_SESSION	0x01
49 
50 /* BABBLE_CTL */
51 #define MUSB_BABBLE_FORCE_TXIDLE	0x80
52 #define MUSB_BABBLE_SW_SESSION_CTRL	0x40
53 #define MUSB_BABBLE_STUCK_J		0x20
54 #define MUSB_BABBLE_RCV_DISABLE		0x04
55 
56 /* MUSB ULPI VBUSCONTROL */
57 #define MUSB_ULPI_USE_EXTVBUS	0x01
58 #define MUSB_ULPI_USE_EXTVBUSIND 0x02
59 /* ULPI_REG_CONTROL */
60 #define MUSB_ULPI_REG_REQ	(1 << 0)
61 #define MUSB_ULPI_REG_CMPLT	(1 << 1)
62 #define MUSB_ULPI_RDN_WR	(1 << 2)
63 
64 /* TESTMODE */
65 #define MUSB_TEST_FORCE_HOST	0x80
66 #define MUSB_TEST_FIFO_ACCESS	0x40
67 #define MUSB_TEST_FORCE_FS	0x20
68 #define MUSB_TEST_FORCE_HS	0x10
69 #define MUSB_TEST_PACKET	0x08
70 #define MUSB_TEST_K		0x04
71 #define MUSB_TEST_J		0x02
72 #define MUSB_TEST_SE0_NAK	0x01
73 
74 /* Allocate for double-packet buffering (effectively doubles assigned _SIZE) */
75 #define MUSB_FIFOSZ_DPB	0x10
76 /* Allocation size (8, 16, 32, ... 4096) */
77 #define MUSB_FIFOSZ_SIZE	0x0f
78 
79 /* CSR0 */
80 #define MUSB_CSR0_FLUSHFIFO	0x0100
81 #define MUSB_CSR0_TXPKTRDY	0x0002
82 #define MUSB_CSR0_RXPKTRDY	0x0001
83 
84 /* CSR0 in Peripheral mode */
85 #define MUSB_CSR0_P_SVDSETUPEND	0x0080
86 #define MUSB_CSR0_P_SVDRXPKTRDY	0x0040
87 #define MUSB_CSR0_P_SENDSTALL	0x0020
88 #define MUSB_CSR0_P_SETUPEND	0x0010
89 #define MUSB_CSR0_P_DATAEND	0x0008
90 #define MUSB_CSR0_P_SENTSTALL	0x0004
91 
92 /* CSR0 in Host mode */
93 #define MUSB_CSR0_H_DIS_PING		0x0800
94 #define MUSB_CSR0_H_WR_DATATOGGLE	0x0400	/* Set to allow setting: */
95 #define MUSB_CSR0_H_DATATOGGLE		0x0200	/* Data toggle control */
96 #define MUSB_CSR0_H_NAKTIMEOUT		0x0080
97 #define MUSB_CSR0_H_STATUSPKT		0x0040
98 #define MUSB_CSR0_H_REQPKT		0x0020
99 #define MUSB_CSR0_H_ERROR		0x0010
100 #define MUSB_CSR0_H_SETUPPKT		0x0008
101 #define MUSB_CSR0_H_RXSTALL		0x0004
102 
103 /* CSR0 bits to avoid zeroing (write zero clears, write 1 ignored) */
104 #define MUSB_CSR0_P_WZC_BITS	\
105 	(MUSB_CSR0_P_SENTSTALL)
106 #define MUSB_CSR0_H_WZC_BITS	\
107 	(MUSB_CSR0_H_NAKTIMEOUT | MUSB_CSR0_H_RXSTALL \
108 	| MUSB_CSR0_RXPKTRDY)
109 
110 /* TxType/RxType */
111 #define MUSB_TYPE_SPEED		0xc0
112 #define MUSB_TYPE_SPEED_SHIFT	6
113 #define MUSB_TYPE_PROTO		0x30	/* Implicitly zero for ep0 */
114 #define MUSB_TYPE_PROTO_SHIFT	4
115 #define MUSB_TYPE_REMOTE_END	0xf	/* Implicitly zero for ep0 */
116 
117 /* CONFIGDATA */
118 #define MUSB_CONFIGDATA_MPRXE		0x80	/* Auto bulk pkt combining */
119 #define MUSB_CONFIGDATA_MPTXE		0x40	/* Auto bulk pkt splitting */
120 #define MUSB_CONFIGDATA_BIGENDIAN	0x20
121 #define MUSB_CONFIGDATA_HBRXE		0x10	/* HB-ISO for RX */
122 #define MUSB_CONFIGDATA_HBTXE		0x08	/* HB-ISO for TX */
123 #define MUSB_CONFIGDATA_DYNFIFO		0x04	/* Dynamic FIFO sizing */
124 #define MUSB_CONFIGDATA_SOFTCONE	0x02	/* SoftConnect */
125 #define MUSB_CONFIGDATA_UTMIDW		0x01	/* Data width 0/1 => 8/16bits */
126 
127 /* TXCSR in Peripheral and Host mode */
128 #define MUSB_TXCSR_AUTOSET		0x8000
129 #define MUSB_TXCSR_DMAENAB		0x1000
130 #define MUSB_TXCSR_FRCDATATOG		0x0800
131 #define MUSB_TXCSR_DMAMODE		0x0400
132 #define MUSB_TXCSR_CLRDATATOG		0x0040
133 #define MUSB_TXCSR_FLUSHFIFO		0x0008
134 #define MUSB_TXCSR_FIFONOTEMPTY		0x0002
135 #define MUSB_TXCSR_TXPKTRDY		0x0001
136 
137 /* TXCSR in Peripheral mode */
138 #define MUSB_TXCSR_P_ISO		0x4000
139 #define MUSB_TXCSR_P_INCOMPTX		0x0080
140 #define MUSB_TXCSR_P_SENTSTALL		0x0020
141 #define MUSB_TXCSR_P_SENDSTALL		0x0010
142 #define MUSB_TXCSR_P_UNDERRUN		0x0004
143 
144 /* TXCSR in Host mode */
145 #define MUSB_TXCSR_H_WR_DATATOGGLE	0x0200
146 #define MUSB_TXCSR_H_DATATOGGLE		0x0100
147 #define MUSB_TXCSR_H_NAKTIMEOUT		0x0080
148 #define MUSB_TXCSR_H_RXSTALL		0x0020
149 #define MUSB_TXCSR_H_ERROR		0x0004
150 
151 /* TXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
152 #define MUSB_TXCSR_P_WZC_BITS	\
153 	(MUSB_TXCSR_P_INCOMPTX | MUSB_TXCSR_P_SENTSTALL \
154 	| MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_FIFONOTEMPTY)
155 #define MUSB_TXCSR_H_WZC_BITS	\
156 	(MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \
157 	| MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY)
158 
159 /* RXCSR in Peripheral and Host mode */
160 #define MUSB_RXCSR_AUTOCLEAR		0x8000
161 #define MUSB_RXCSR_DMAENAB		0x2000
162 #define MUSB_RXCSR_DISNYET		0x1000
163 #define MUSB_RXCSR_PID_ERR		0x1000
164 #define MUSB_RXCSR_DMAMODE		0x0800
165 #define MUSB_RXCSR_INCOMPRX		0x0100
166 #define MUSB_RXCSR_CLRDATATOG		0x0080
167 #define MUSB_RXCSR_FLUSHFIFO		0x0010
168 #define MUSB_RXCSR_DATAERROR		0x0008
169 #define MUSB_RXCSR_FIFOFULL		0x0002
170 #define MUSB_RXCSR_RXPKTRDY		0x0001
171 
172 /* RXCSR in Peripheral mode */
173 #define MUSB_RXCSR_P_ISO		0x4000
174 #define MUSB_RXCSR_P_SENTSTALL		0x0040
175 #define MUSB_RXCSR_P_SENDSTALL		0x0020
176 #define MUSB_RXCSR_P_OVERRUN		0x0004
177 
178 /* RXCSR in Host mode */
179 #define MUSB_RXCSR_H_AUTOREQ		0x4000
180 #define MUSB_RXCSR_H_WR_DATATOGGLE	0x0400
181 #define MUSB_RXCSR_H_DATATOGGLE		0x0200
182 #define MUSB_RXCSR_H_RXSTALL		0x0040
183 #define MUSB_RXCSR_H_REQPKT		0x0020
184 #define MUSB_RXCSR_H_ERROR		0x0004
185 
186 /* RXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
187 #define MUSB_RXCSR_P_WZC_BITS	\
188 	(MUSB_RXCSR_P_SENTSTALL | MUSB_RXCSR_P_OVERRUN \
189 	| MUSB_RXCSR_RXPKTRDY)
190 #define MUSB_RXCSR_H_WZC_BITS	\
191 	(MUSB_RXCSR_H_RXSTALL | MUSB_RXCSR_H_ERROR \
192 	| MUSB_RXCSR_DATAERROR | MUSB_RXCSR_RXPKTRDY)
193 
194 /* HUBADDR */
195 #define MUSB_HUBADDR_MULTI_TT		0x80
196 
197 
198 /*
199  * Common USB registers
200  */
201 
202 #define MUSB_FADDR		0x00	/* 8-bit */
203 #define MUSB_POWER		0x01	/* 8-bit */
204 
205 #define MUSB_INTRTX		0x02	/* 16-bit */
206 #define MUSB_INTRRX		0x04
207 #define MUSB_INTRTXE		0x06
208 #define MUSB_INTRRXE		0x08
209 #define MUSB_INTRUSB		0x0A	/* 8 bit */
210 #define MUSB_INTRUSBE		0x0B	/* 8 bit */
211 #define MUSB_FRAME		0x0C
212 #define MUSB_INDEX		0x0E	/* 8 bit */
213 #define MUSB_TESTMODE		0x0F	/* 8 bit */
214 
215 /*
216  * Additional Control Registers
217  */
218 
219 #define MUSB_DEVCTL		0x60	/* 8 bit */
220 #define MUSB_BABBLE_CTL		0x61	/* 8 bit */
221 
222 /* These are always controlled through the INDEX register */
223 #define MUSB_TXFIFOSZ		0x62	/* 8-bit (see masks) */
224 #define MUSB_RXFIFOSZ		0x63	/* 8-bit (see masks) */
225 #define MUSB_TXFIFOADD		0x64	/* 16-bit offset shifted right 3 */
226 #define MUSB_RXFIFOADD		0x66	/* 16-bit offset shifted right 3 */
227 
228 /* REVISIT: vctrl/vstatus: optional vendor utmi+phy register at 0x68 */
229 #define MUSB_HWVERS		0x6C	/* 8 bit */
230 #define MUSB_ULPI_BUSCONTROL	0x70	/* 8 bit */
231 #define MUSB_ULPI_INT_MASK	0x72	/* 8 bit */
232 #define MUSB_ULPI_INT_SRC	0x73	/* 8 bit */
233 #define MUSB_ULPI_REG_DATA	0x74	/* 8 bit */
234 #define MUSB_ULPI_REG_ADDR	0x75	/* 8 bit */
235 #define MUSB_ULPI_REG_CONTROL	0x76	/* 8 bit */
236 #define MUSB_ULPI_RAW_DATA	0x77	/* 8 bit */
237 
238 #define MUSB_EPINFO		0x78	/* 8 bit */
239 #define MUSB_RAMINFO		0x79	/* 8 bit */
240 #define MUSB_LINKINFO		0x7a	/* 8 bit */
241 #define MUSB_VPLEN		0x7b	/* 8 bit */
242 #define MUSB_HS_EOF1		0x7c	/* 8 bit */
243 #define MUSB_FS_EOF1		0x7d	/* 8 bit */
244 #define MUSB_LS_EOF1		0x7e	/* 8 bit */
245 
246 /* Offsets to endpoint registers */
247 #define MUSB_TXMAXP		0x00
248 #define MUSB_TXCSR		0x02
249 #define MUSB_CSR0		MUSB_TXCSR	/* Re-used for EP0 */
250 #define MUSB_RXMAXP		0x04
251 #define MUSB_RXCSR		0x06
252 #define MUSB_RXCOUNT		0x08
253 #define MUSB_COUNT0		MUSB_RXCOUNT	/* Re-used for EP0 */
254 #define MUSB_TXTYPE		0x0A
255 #define MUSB_TYPE0		MUSB_TXTYPE	/* Re-used for EP0 */
256 #define MUSB_TXINTERVAL		0x0B
257 #define MUSB_NAKLIMIT0		MUSB_TXINTERVAL	/* Re-used for EP0 */
258 #define MUSB_RXTYPE		0x0C
259 #define MUSB_RXINTERVAL		0x0D
260 #define MUSB_FIFOSIZE		0x0F
261 #define MUSB_CONFIGDATA		MUSB_FIFOSIZE	/* Re-used for EP0 */
262 
263 #include "tusb6010.h"		/* Needed "only" for TUSB_EP0_CONF */
264 
265 #define MUSB_TXCSR_MODE			0x2000
266 
267 /* "bus control"/target registers, for host side multipoint (external hubs) */
268 #define MUSB_TXFUNCADDR		0x00
269 #define MUSB_TXHUBADDR		0x02
270 #define MUSB_TXHUBPORT		0x03
271 
272 #define MUSB_RXFUNCADDR		0x04
273 #define MUSB_RXHUBADDR		0x06
274 #define MUSB_RXHUBPORT		0x07
275 
musb_read_configdata(void __iomem * mbase)276 static inline u8 musb_read_configdata(void __iomem *mbase)
277 {
278 	musb_writeb(mbase, MUSB_INDEX, 0);
279 	return musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
280 }
281 
musb_write_rxfunaddr(struct musb * musb,u8 epnum,u8 qh_addr_reg)282 static inline void musb_write_rxfunaddr(struct musb *musb, u8 epnum,
283 		u8 qh_addr_reg)
284 {
285 	musb_writeb(musb->mregs,
286 		    musb->io.busctl_offset(epnum, MUSB_RXFUNCADDR),
287 		    qh_addr_reg);
288 }
289 
musb_write_rxhubaddr(struct musb * musb,u8 epnum,u8 qh_h_addr_reg)290 static inline void musb_write_rxhubaddr(struct musb *musb, u8 epnum,
291 		u8 qh_h_addr_reg)
292 {
293 	musb_writeb(musb->mregs, musb->io.busctl_offset(epnum, MUSB_RXHUBADDR),
294 			qh_h_addr_reg);
295 }
296 
musb_write_rxhubport(struct musb * musb,u8 epnum,u8 qh_h_port_reg)297 static inline void musb_write_rxhubport(struct musb *musb, u8 epnum,
298 		u8 qh_h_port_reg)
299 {
300 	musb_writeb(musb->mregs, musb->io.busctl_offset(epnum, MUSB_RXHUBPORT),
301 			qh_h_port_reg);
302 }
303 
musb_write_txfunaddr(struct musb * musb,u8 epnum,u8 qh_addr_reg)304 static inline void musb_write_txfunaddr(struct musb *musb, u8 epnum,
305 		u8 qh_addr_reg)
306 {
307 	musb_writeb(musb->mregs,
308 		    musb->io.busctl_offset(epnum, MUSB_TXFUNCADDR),
309 		    qh_addr_reg);
310 }
311 
musb_write_txhubaddr(struct musb * musb,u8 epnum,u8 qh_addr_reg)312 static inline void musb_write_txhubaddr(struct musb *musb, u8 epnum,
313 		u8 qh_addr_reg)
314 {
315 	musb_writeb(musb->mregs, musb->io.busctl_offset(epnum, MUSB_TXHUBADDR),
316 			qh_addr_reg);
317 }
318 
musb_write_txhubport(struct musb * musb,u8 epnum,u8 qh_h_port_reg)319 static inline void musb_write_txhubport(struct musb *musb, u8 epnum,
320 		u8 qh_h_port_reg)
321 {
322 	musb_writeb(musb->mregs, musb->io.busctl_offset(epnum, MUSB_TXHUBPORT),
323 			qh_h_port_reg);
324 }
325 
musb_read_rxfunaddr(struct musb * musb,u8 epnum)326 static inline u8 musb_read_rxfunaddr(struct musb *musb, u8 epnum)
327 {
328 	return musb_readb(musb->mregs,
329 			  musb->io.busctl_offset(epnum, MUSB_RXFUNCADDR));
330 }
331 
musb_read_rxhubaddr(struct musb * musb,u8 epnum)332 static inline u8 musb_read_rxhubaddr(struct musb *musb, u8 epnum)
333 {
334 	return musb_readb(musb->mregs,
335 			  musb->io.busctl_offset(epnum, MUSB_RXHUBADDR));
336 }
337 
musb_read_rxhubport(struct musb * musb,u8 epnum)338 static inline u8 musb_read_rxhubport(struct musb *musb, u8 epnum)
339 {
340 	return musb_readb(musb->mregs,
341 			  musb->io.busctl_offset(epnum, MUSB_RXHUBPORT));
342 }
343 
musb_read_txfunaddr(struct musb * musb,u8 epnum)344 static inline u8 musb_read_txfunaddr(struct musb *musb, u8 epnum)
345 {
346 	return musb_readb(musb->mregs,
347 			  musb->io.busctl_offset(epnum, MUSB_TXFUNCADDR));
348 }
349 
musb_read_txhubaddr(struct musb * musb,u8 epnum)350 static inline u8 musb_read_txhubaddr(struct musb *musb, u8 epnum)
351 {
352 	return musb_readb(musb->mregs,
353 			  musb->io.busctl_offset(epnum, MUSB_TXHUBADDR));
354 }
355 
musb_read_txhubport(struct musb * musb,u8 epnum)356 static inline u8 musb_read_txhubport(struct musb *musb, u8 epnum)
357 {
358 	return musb_readb(musb->mregs,
359 			  musb->io.busctl_offset(epnum, MUSB_TXHUBPORT));
360 }
361 
362 #endif	/* __MUSB_REGS_H__ */
363