1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3     Copyright (c) 1999-2002 Merlin Hughes <merlin@merlin.org>
4 
5     Shamelessly ripped from i2c-piix4.c:
6 
7     Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> and
8     Philip Edelbrock <phil@netroedge.com>
9 
10 */
11 
12 /*
13     2002-04-08: Added nForce support. (Csaba Halasz)
14     2002-10-03: Fixed nForce PnP I/O port. (Michael Steil)
15     2002-12-28: Rewritten into something that resembles a Linux driver (hch)
16     2003-11-29: Added back AMD8111 removed by the previous rewrite.
17                 (Philip Pokorny)
18 */
19 
20 /*
21    Supports AMD756, AMD766, AMD768, AMD8111 and nVidia nForce
22    Note: we assume there can only be one device, with one SMBus interface.
23 */
24 
25 #include <linux/module.h>
26 #include <linux/pci.h>
27 #include <linux/kernel.h>
28 #include <linux/delay.h>
29 #include <linux/stddef.h>
30 #include <linux/ioport.h>
31 #include <linux/i2c.h>
32 #include <linux/acpi.h>
33 #include <linux/io.h>
34 
35 /* AMD756 SMBus address offsets */
36 #define SMB_ADDR_OFFSET		0xE0
37 #define SMB_IOSIZE		16
38 #define SMB_GLOBAL_STATUS	(0x0 + amd756_ioport)
39 #define SMB_GLOBAL_ENABLE	(0x2 + amd756_ioport)
40 #define SMB_HOST_ADDRESS	(0x4 + amd756_ioport)
41 #define SMB_HOST_DATA		(0x6 + amd756_ioport)
42 #define SMB_HOST_COMMAND	(0x8 + amd756_ioport)
43 #define SMB_HOST_BLOCK_DATA	(0x9 + amd756_ioport)
44 #define SMB_HAS_DATA		(0xA + amd756_ioport)
45 #define SMB_HAS_DEVICE_ADDRESS	(0xC + amd756_ioport)
46 #define SMB_HAS_HOST_ADDRESS	(0xE + amd756_ioport)
47 #define SMB_SNOOP_ADDRESS	(0xF + amd756_ioport)
48 
49 /* PCI Address Constants */
50 
51 /* address of I/O space */
52 #define SMBBA		0x058		/* mh */
53 #define SMBBANFORCE	0x014
54 
55 /* general configuration */
56 #define SMBGCFG		0x041		/* mh */
57 
58 /* silicon revision code */
59 #define SMBREV		0x008
60 
61 /* Other settings */
62 #define MAX_TIMEOUT	500
63 
64 /* AMD756 constants */
65 #define AMD756_QUICK		0x00
66 #define AMD756_BYTE		0x01
67 #define AMD756_BYTE_DATA	0x02
68 #define AMD756_WORD_DATA	0x03
69 #define AMD756_PROCESS_CALL	0x04
70 #define AMD756_BLOCK_DATA	0x05
71 
72 static struct pci_driver amd756_driver;
73 static unsigned short amd756_ioport;
74 
75 /*
76   SMBUS event = I/O 28-29 bit 11
77      see E0 for the status bits and enabled in E2
78 
79 */
80 #define GS_ABRT_STS	(1 << 0)
81 #define GS_COL_STS	(1 << 1)
82 #define GS_PRERR_STS	(1 << 2)
83 #define GS_HST_STS	(1 << 3)
84 #define GS_HCYC_STS	(1 << 4)
85 #define GS_TO_STS	(1 << 5)
86 #define GS_SMB_STS	(1 << 11)
87 
88 #define GS_CLEAR_STS	(GS_ABRT_STS | GS_COL_STS | GS_PRERR_STS | \
89 			 GS_HCYC_STS | GS_TO_STS )
90 
91 #define GE_CYC_TYPE_MASK	(7)
92 #define GE_HOST_STC		(1 << 3)
93 #define GE_ABORT		(1 << 5)
94 
95 
amd756_transaction(struct i2c_adapter * adap)96 static int amd756_transaction(struct i2c_adapter *adap)
97 {
98 	int temp;
99 	int result = 0;
100 	int timeout = 0;
101 
102 	dev_dbg(&adap->dev, "Transaction (pre): GS=%04x, GE=%04x, ADD=%04x, "
103 		"DAT=%04x\n", inw_p(SMB_GLOBAL_STATUS),
104 		inw_p(SMB_GLOBAL_ENABLE), inw_p(SMB_HOST_ADDRESS),
105 		inb_p(SMB_HOST_DATA));
106 
107 	/* Make sure the SMBus host is ready to start transmitting */
108 	if ((temp = inw_p(SMB_GLOBAL_STATUS)) & (GS_HST_STS | GS_SMB_STS)) {
109 		dev_dbg(&adap->dev, "SMBus busy (%04x). Waiting...\n", temp);
110 		do {
111 			msleep(1);
112 			temp = inw_p(SMB_GLOBAL_STATUS);
113 		} while ((temp & (GS_HST_STS | GS_SMB_STS)) &&
114 		         (timeout++ < MAX_TIMEOUT));
115 		/* If the SMBus is still busy, we give up */
116 		if (timeout > MAX_TIMEOUT) {
117 			dev_dbg(&adap->dev, "Busy wait timeout (%04x)\n", temp);
118 			goto abort;
119 		}
120 		timeout = 0;
121 	}
122 
123 	/* start the transaction by setting the start bit */
124 	outw_p(inw(SMB_GLOBAL_ENABLE) | GE_HOST_STC, SMB_GLOBAL_ENABLE);
125 
126 	/* We will always wait for a fraction of a second! */
127 	do {
128 		msleep(1);
129 		temp = inw_p(SMB_GLOBAL_STATUS);
130 	} while ((temp & GS_HST_STS) && (timeout++ < MAX_TIMEOUT));
131 
132 	/* If the SMBus is still busy, we give up */
133 	if (timeout > MAX_TIMEOUT) {
134 		dev_dbg(&adap->dev, "Completion timeout!\n");
135 		goto abort;
136 	}
137 
138 	if (temp & GS_PRERR_STS) {
139 		result = -ENXIO;
140 		dev_dbg(&adap->dev, "SMBus Protocol error (no response)!\n");
141 	}
142 
143 	if (temp & GS_COL_STS) {
144 		result = -EIO;
145 		dev_warn(&adap->dev, "SMBus collision!\n");
146 	}
147 
148 	if (temp & GS_TO_STS) {
149 		result = -ETIMEDOUT;
150 		dev_dbg(&adap->dev, "SMBus protocol timeout!\n");
151 	}
152 
153 	if (temp & GS_HCYC_STS)
154 		dev_dbg(&adap->dev, "SMBus protocol success!\n");
155 
156 	outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS);
157 
158 #ifdef DEBUG
159 	if (((temp = inw_p(SMB_GLOBAL_STATUS)) & GS_CLEAR_STS) != 0x00) {
160 		dev_dbg(&adap->dev,
161 			"Failed reset at end of transaction (%04x)\n", temp);
162 	}
163 #endif
164 
165 	dev_dbg(&adap->dev,
166 		"Transaction (post): GS=%04x, GE=%04x, ADD=%04x, DAT=%04x\n",
167 		inw_p(SMB_GLOBAL_STATUS), inw_p(SMB_GLOBAL_ENABLE),
168 		inw_p(SMB_HOST_ADDRESS), inb_p(SMB_HOST_DATA));
169 
170 	return result;
171 
172  abort:
173 	dev_warn(&adap->dev, "Sending abort\n");
174 	outw_p(inw(SMB_GLOBAL_ENABLE) | GE_ABORT, SMB_GLOBAL_ENABLE);
175 	msleep(100);
176 	outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS);
177 	return -EIO;
178 }
179 
180 /* Return negative errno on error. */
amd756_access(struct i2c_adapter * adap,u16 addr,unsigned short flags,char read_write,u8 command,int size,union i2c_smbus_data * data)181 static s32 amd756_access(struct i2c_adapter * adap, u16 addr,
182 		  unsigned short flags, char read_write,
183 		  u8 command, int size, union i2c_smbus_data * data)
184 {
185 	int i, len;
186 	int status;
187 
188 	switch (size) {
189 	case I2C_SMBUS_QUICK:
190 		outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
191 		       SMB_HOST_ADDRESS);
192 		size = AMD756_QUICK;
193 		break;
194 	case I2C_SMBUS_BYTE:
195 		outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
196 		       SMB_HOST_ADDRESS);
197 		if (read_write == I2C_SMBUS_WRITE)
198 			outb_p(command, SMB_HOST_DATA);
199 		size = AMD756_BYTE;
200 		break;
201 	case I2C_SMBUS_BYTE_DATA:
202 		outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
203 		       SMB_HOST_ADDRESS);
204 		outb_p(command, SMB_HOST_COMMAND);
205 		if (read_write == I2C_SMBUS_WRITE)
206 			outw_p(data->byte, SMB_HOST_DATA);
207 		size = AMD756_BYTE_DATA;
208 		break;
209 	case I2C_SMBUS_WORD_DATA:
210 		outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
211 		       SMB_HOST_ADDRESS);
212 		outb_p(command, SMB_HOST_COMMAND);
213 		if (read_write == I2C_SMBUS_WRITE)
214 			outw_p(data->word, SMB_HOST_DATA);	/* TODO: endian???? */
215 		size = AMD756_WORD_DATA;
216 		break;
217 	case I2C_SMBUS_BLOCK_DATA:
218 		outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
219 		       SMB_HOST_ADDRESS);
220 		outb_p(command, SMB_HOST_COMMAND);
221 		if (read_write == I2C_SMBUS_WRITE) {
222 			len = data->block[0];
223 			if (len < 0)
224 				len = 0;
225 			if (len > 32)
226 				len = 32;
227 			outw_p(len, SMB_HOST_DATA);
228 			/* i = inw_p(SMBHSTCNT); Reset SMBBLKDAT */
229 			for (i = 1; i <= len; i++)
230 				outb_p(data->block[i],
231 				       SMB_HOST_BLOCK_DATA);
232 		}
233 		size = AMD756_BLOCK_DATA;
234 		break;
235 	default:
236 		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
237 		return -EOPNOTSUPP;
238 	}
239 
240 	/* How about enabling interrupts... */
241 	outw_p(size & GE_CYC_TYPE_MASK, SMB_GLOBAL_ENABLE);
242 
243 	status = amd756_transaction(adap);
244 	if (status)
245 		return status;
246 
247 	if ((read_write == I2C_SMBUS_WRITE) || (size == AMD756_QUICK))
248 		return 0;
249 
250 
251 	switch (size) {
252 	case AMD756_BYTE:
253 		data->byte = inw_p(SMB_HOST_DATA);
254 		break;
255 	case AMD756_BYTE_DATA:
256 		data->byte = inw_p(SMB_HOST_DATA);
257 		break;
258 	case AMD756_WORD_DATA:
259 		data->word = inw_p(SMB_HOST_DATA);	/* TODO: endian???? */
260 		break;
261 	case AMD756_BLOCK_DATA:
262 		data->block[0] = inw_p(SMB_HOST_DATA) & 0x3f;
263 		if(data->block[0] > 32)
264 			data->block[0] = 32;
265 		/* i = inw_p(SMBHSTCNT); Reset SMBBLKDAT */
266 		for (i = 1; i <= data->block[0]; i++)
267 			data->block[i] = inb_p(SMB_HOST_BLOCK_DATA);
268 		break;
269 	}
270 
271 	return 0;
272 }
273 
amd756_func(struct i2c_adapter * adapter)274 static u32 amd756_func(struct i2c_adapter *adapter)
275 {
276 	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
277 	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
278 	    I2C_FUNC_SMBUS_BLOCK_DATA;
279 }
280 
281 static const struct i2c_algorithm smbus_algorithm = {
282 	.smbus_xfer	= amd756_access,
283 	.functionality	= amd756_func,
284 };
285 
286 struct i2c_adapter amd756_smbus = {
287 	.owner		= THIS_MODULE,
288 	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
289 	.algo		= &smbus_algorithm,
290 };
291 
292 enum chiptype { AMD756, AMD766, AMD768, NFORCE, AMD8111 };
293 static const char* chipname[] = {
294 	"AMD756", "AMD766", "AMD768",
295 	"nVidia nForce", "AMD8111",
296 };
297 
298 static const struct pci_device_id amd756_ids[] = {
299 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_740B),
300 	  .driver_data = AMD756 },
301 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7413),
302 	  .driver_data = AMD766 },
303 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_OPUS_7443),
304 	  .driver_data = AMD768 },
305 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS),
306 	  .driver_data = AMD8111 },
307 	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS),
308 	  .driver_data = NFORCE },
309 	{ 0, }
310 };
311 
312 MODULE_DEVICE_TABLE (pci, amd756_ids);
313 
amd756_probe(struct pci_dev * pdev,const struct pci_device_id * id)314 static int amd756_probe(struct pci_dev *pdev, const struct pci_device_id *id)
315 {
316 	int nforce = (id->driver_data == NFORCE);
317 	int error;
318 	u8 temp;
319 
320 	if (amd756_ioport) {
321 		dev_err(&pdev->dev, "Only one device supported "
322 		       "(you have a strange motherboard, btw)\n");
323 		return -ENODEV;
324 	}
325 
326 	if (nforce) {
327 		if (PCI_FUNC(pdev->devfn) != 1)
328 			return -ENODEV;
329 
330 		pci_read_config_word(pdev, SMBBANFORCE, &amd756_ioport);
331 		amd756_ioport &= 0xfffc;
332 	} else { /* amd */
333 		if (PCI_FUNC(pdev->devfn) != 3)
334 			return -ENODEV;
335 
336 		pci_read_config_byte(pdev, SMBGCFG, &temp);
337 		if ((temp & 128) == 0) {
338 			dev_err(&pdev->dev,
339 				"Error: SMBus controller I/O not enabled!\n");
340 			return -ENODEV;
341 		}
342 
343 		/* Determine the address of the SMBus areas */
344 		/* Technically it is a dword but... */
345 		pci_read_config_word(pdev, SMBBA, &amd756_ioport);
346 		amd756_ioport &= 0xff00;
347 		amd756_ioport += SMB_ADDR_OFFSET;
348 	}
349 
350 	error = acpi_check_region(amd756_ioport, SMB_IOSIZE,
351 				  amd756_driver.name);
352 	if (error)
353 		return -ENODEV;
354 
355 	if (!request_region(amd756_ioport, SMB_IOSIZE, amd756_driver.name)) {
356 		dev_err(&pdev->dev, "SMB region 0x%x already in use!\n",
357 			amd756_ioport);
358 		return -ENODEV;
359 	}
360 
361 	pci_read_config_byte(pdev, SMBREV, &temp);
362 	dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp);
363 	dev_dbg(&pdev->dev, "AMD756_smba = 0x%X\n", amd756_ioport);
364 
365 	/* set up the sysfs linkage to our parent device */
366 	amd756_smbus.dev.parent = &pdev->dev;
367 
368 	snprintf(amd756_smbus.name, sizeof(amd756_smbus.name),
369 		 "SMBus %s adapter at %04x", chipname[id->driver_data],
370 		 amd756_ioport);
371 
372 	error = i2c_add_adapter(&amd756_smbus);
373 	if (error)
374 		goto out_err;
375 
376 	return 0;
377 
378  out_err:
379 	release_region(amd756_ioport, SMB_IOSIZE);
380 	return error;
381 }
382 
amd756_remove(struct pci_dev * dev)383 static void amd756_remove(struct pci_dev *dev)
384 {
385 	i2c_del_adapter(&amd756_smbus);
386 	release_region(amd756_ioport, SMB_IOSIZE);
387 }
388 
389 static struct pci_driver amd756_driver = {
390 	.name		= "amd756_smbus",
391 	.id_table	= amd756_ids,
392 	.probe		= amd756_probe,
393 	.remove		= amd756_remove,
394 };
395 
396 module_pci_driver(amd756_driver);
397 
398 MODULE_AUTHOR("Merlin Hughes <merlin@merlin.org>");
399 MODULE_DESCRIPTION("AMD756/766/768/8111 and nVidia nForce SMBus driver");
400 MODULE_LICENSE("GPL");
401 
402 EXPORT_SYMBOL(amd756_smbus);
403