1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Driver for the Auvitek USB bridge
4 *
5 * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
6 */
7
8 #include "au0828.h"
9
10 #include <linux/module.h>
11 #include <linux/slab.h>
12 #include <linux/init.h>
13 #include <linux/device.h>
14 #include <media/v4l2-common.h>
15 #include <media/tuner.h>
16
17 #include "au8522.h"
18 #include "xc5000.h"
19 #include "mxl5007t.h"
20 #include "tda18271.h"
21
22 static int preallocate_big_buffers;
23 module_param_named(preallocate_big_buffers, preallocate_big_buffers, int, 0644);
24 MODULE_PARM_DESC(preallocate_big_buffers, "Preallocate the larger transfer buffers at module load time");
25
26 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
27
28 #define _AU0828_BULKPIPE 0x83
29 #define _BULKPIPESIZE 0xe522
30
31 static u8 hauppauge_hvr950q_led_states[] = {
32 0x00, /* off */
33 0x02, /* yellow */
34 0x04, /* green */
35 };
36
37 static struct au8522_led_config hauppauge_hvr950q_led_cfg = {
38 .gpio_output = 0x00e0,
39 .gpio_output_enable = 0x6006,
40 .gpio_output_disable = 0x0660,
41
42 .gpio_leds = 0x00e2,
43 .led_states = hauppauge_hvr950q_led_states,
44 .num_led_states = sizeof(hauppauge_hvr950q_led_states),
45
46 .vsb8_strong = 20 /* dB */ * 10,
47 .qam64_strong = 25 /* dB */ * 10,
48 .qam256_strong = 32 /* dB */ * 10,
49 };
50
51 static struct au8522_config hauppauge_hvr950q_config = {
52 .demod_address = 0x8e >> 1,
53 .status_mode = AU8522_DEMODLOCKING,
54 .qam_if = AU8522_IF_6MHZ,
55 .vsb_if = AU8522_IF_6MHZ,
56 .led_cfg = &hauppauge_hvr950q_led_cfg,
57 };
58
59 static struct au8522_config fusionhdtv7usb_config = {
60 .demod_address = 0x8e >> 1,
61 .status_mode = AU8522_DEMODLOCKING,
62 .qam_if = AU8522_IF_6MHZ,
63 .vsb_if = AU8522_IF_6MHZ,
64 };
65
66 static struct au8522_config hauppauge_woodbury_config = {
67 .demod_address = 0x8e >> 1,
68 .status_mode = AU8522_DEMODLOCKING,
69 .qam_if = AU8522_IF_4MHZ,
70 .vsb_if = AU8522_IF_3_25MHZ,
71 };
72
73 static struct xc5000_config hauppauge_xc5000a_config = {
74 .i2c_address = 0x61,
75 .if_khz = 6000,
76 .chip_id = XC5000A,
77 .output_amp = 0x8f,
78 };
79
80 static struct xc5000_config hauppauge_xc5000c_config = {
81 .i2c_address = 0x61,
82 .if_khz = 6000,
83 .chip_id = XC5000C,
84 .output_amp = 0x8f,
85 };
86
87 static struct mxl5007t_config mxl5007t_hvr950q_config = {
88 .xtal_freq_hz = MxL_XTAL_24_MHZ,
89 .if_freq_hz = MxL_IF_6_MHZ,
90 };
91
92 static struct tda18271_config hauppauge_woodbury_tunerconfig = {
93 .gate = TDA18271_GATE_DIGITAL,
94 };
95
96 static void au0828_restart_dvb_streaming(struct work_struct *work);
97
au0828_bulk_timeout(struct timer_list * t)98 static void au0828_bulk_timeout(struct timer_list *t)
99 {
100 struct au0828_dev *dev = from_timer(dev, t, bulk_timeout);
101
102 dprintk(1, "%s called\n", __func__);
103 dev->bulk_timeout_running = 0;
104 schedule_work(&dev->restart_streaming);
105 }
106
107 /*-------------------------------------------------------------------*/
urb_completion(struct urb * purb)108 static void urb_completion(struct urb *purb)
109 {
110 struct au0828_dev *dev = purb->context;
111 int ptype = usb_pipetype(purb->pipe);
112 unsigned char *ptr;
113
114 dprintk(2, "%s: %d\n", __func__, purb->actual_length);
115
116 if (!dev) {
117 dprintk(2, "%s: no dev!\n", __func__);
118 return;
119 }
120
121 if (!dev->urb_streaming) {
122 dprintk(2, "%s: not streaming!\n", __func__);
123 return;
124 }
125
126 if (ptype != PIPE_BULK) {
127 pr_err("%s: Unsupported URB type %d\n",
128 __func__, ptype);
129 return;
130 }
131
132 /* See if the stream is corrupted (to work around a hardware
133 bug where the stream gets misaligned */
134 ptr = purb->transfer_buffer;
135 if (purb->actual_length > 0 && ptr[0] != 0x47) {
136 dprintk(1, "Need to restart streaming %02x len=%d!\n",
137 ptr[0], purb->actual_length);
138 schedule_work(&dev->restart_streaming);
139 return;
140 } else if (dev->bulk_timeout_running == 1) {
141 /* The URB handler has fired, so cancel timer which would
142 * restart endpoint if we hadn't
143 */
144 dprintk(1, "%s cancelling bulk timeout\n", __func__);
145 dev->bulk_timeout_running = 0;
146 del_timer(&dev->bulk_timeout);
147 }
148
149 /* Feed the transport payload into the kernel demux */
150 dvb_dmx_swfilter_packets(&dev->dvb.demux,
151 purb->transfer_buffer, purb->actual_length / 188);
152
153 /* Clean the buffer before we requeue */
154 memset(purb->transfer_buffer, 0, URB_BUFSIZE);
155
156 /* Requeue URB */
157 usb_submit_urb(purb, GFP_ATOMIC);
158 }
159
stop_urb_transfer(struct au0828_dev * dev)160 static int stop_urb_transfer(struct au0828_dev *dev)
161 {
162 int i;
163
164 dprintk(2, "%s()\n", __func__);
165
166 if (!dev->urb_streaming)
167 return 0;
168
169 if (dev->bulk_timeout_running == 1) {
170 dev->bulk_timeout_running = 0;
171 del_timer(&dev->bulk_timeout);
172 }
173
174 dev->urb_streaming = false;
175 for (i = 0; i < URB_COUNT; i++) {
176 if (dev->urbs[i]) {
177 usb_kill_urb(dev->urbs[i]);
178 if (!preallocate_big_buffers)
179 kfree(dev->urbs[i]->transfer_buffer);
180
181 usb_free_urb(dev->urbs[i]);
182 }
183 }
184
185 return 0;
186 }
187
start_urb_transfer(struct au0828_dev * dev)188 static int start_urb_transfer(struct au0828_dev *dev)
189 {
190 struct urb *purb;
191 int i, ret;
192
193 dprintk(2, "%s()\n", __func__);
194
195 if (dev->urb_streaming) {
196 dprintk(2, "%s: bulk xfer already running!\n", __func__);
197 return 0;
198 }
199
200 for (i = 0; i < URB_COUNT; i++) {
201
202 dev->urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
203 if (!dev->urbs[i])
204 return -ENOMEM;
205
206 purb = dev->urbs[i];
207
208 if (preallocate_big_buffers)
209 purb->transfer_buffer = dev->dig_transfer_buffer[i];
210 else
211 purb->transfer_buffer = kzalloc(URB_BUFSIZE,
212 GFP_KERNEL);
213
214 if (!purb->transfer_buffer) {
215 usb_free_urb(purb);
216 dev->urbs[i] = NULL;
217 ret = -ENOMEM;
218 pr_err("%s: failed big buffer allocation, err = %d\n",
219 __func__, ret);
220 return ret;
221 }
222
223 purb->status = -EINPROGRESS;
224 usb_fill_bulk_urb(purb,
225 dev->usbdev,
226 usb_rcvbulkpipe(dev->usbdev,
227 _AU0828_BULKPIPE),
228 purb->transfer_buffer,
229 URB_BUFSIZE,
230 urb_completion,
231 dev);
232
233 }
234
235 for (i = 0; i < URB_COUNT; i++) {
236 ret = usb_submit_urb(dev->urbs[i], GFP_ATOMIC);
237 if (ret != 0) {
238 stop_urb_transfer(dev);
239 pr_err("%s: failed urb submission, err = %d\n",
240 __func__, ret);
241 return ret;
242 }
243 }
244
245 dev->urb_streaming = true;
246
247 /* If we don't valid data within 1 second, restart stream */
248 mod_timer(&dev->bulk_timeout, jiffies + (HZ));
249 dev->bulk_timeout_running = 1;
250
251 return 0;
252 }
253
au0828_start_transport(struct au0828_dev * dev)254 static void au0828_start_transport(struct au0828_dev *dev)
255 {
256 au0828_write(dev, 0x608, 0x90);
257 au0828_write(dev, 0x609, 0x72);
258 au0828_write(dev, 0x60a, 0x71);
259 au0828_write(dev, 0x60b, 0x01);
260
261 }
262
au0828_stop_transport(struct au0828_dev * dev,int full_stop)263 static void au0828_stop_transport(struct au0828_dev *dev, int full_stop)
264 {
265 if (full_stop) {
266 au0828_write(dev, 0x608, 0x00);
267 au0828_write(dev, 0x609, 0x00);
268 au0828_write(dev, 0x60a, 0x00);
269 }
270 au0828_write(dev, 0x60b, 0x00);
271 }
272
au0828_dvb_start_feed(struct dvb_demux_feed * feed)273 static int au0828_dvb_start_feed(struct dvb_demux_feed *feed)
274 {
275 struct dvb_demux *demux = feed->demux;
276 struct au0828_dev *dev = (struct au0828_dev *) demux->priv;
277 struct au0828_dvb *dvb = &dev->dvb;
278 int ret = 0;
279
280 dprintk(1, "%s()\n", __func__);
281
282 if (!demux->dmx.frontend)
283 return -EINVAL;
284
285 if (dvb->frontend) {
286 mutex_lock(&dvb->lock);
287 dvb->start_count++;
288 dprintk(1, "%s(), start_count: %d, stop_count: %d\n", __func__,
289 dvb->start_count, dvb->stop_count);
290 if (dvb->feeding++ == 0) {
291 /* Start transport */
292 au0828_start_transport(dev);
293 ret = start_urb_transfer(dev);
294 if (ret < 0) {
295 au0828_stop_transport(dev, 0);
296 dvb->feeding--; /* We ran out of memory... */
297 }
298 }
299 mutex_unlock(&dvb->lock);
300 }
301
302 return ret;
303 }
304
au0828_dvb_stop_feed(struct dvb_demux_feed * feed)305 static int au0828_dvb_stop_feed(struct dvb_demux_feed *feed)
306 {
307 struct dvb_demux *demux = feed->demux;
308 struct au0828_dev *dev = (struct au0828_dev *) demux->priv;
309 struct au0828_dvb *dvb = &dev->dvb;
310 int ret = 0;
311
312 dprintk(1, "%s()\n", __func__);
313
314 if (dvb->frontend) {
315 cancel_work_sync(&dev->restart_streaming);
316
317 mutex_lock(&dvb->lock);
318 dvb->stop_count++;
319 dprintk(1, "%s(), start_count: %d, stop_count: %d\n", __func__,
320 dvb->start_count, dvb->stop_count);
321 if (dvb->feeding > 0) {
322 dvb->feeding--;
323 if (dvb->feeding == 0) {
324 /* Stop transport */
325 ret = stop_urb_transfer(dev);
326 au0828_stop_transport(dev, 0);
327 }
328 }
329 mutex_unlock(&dvb->lock);
330 }
331
332 return ret;
333 }
334
au0828_restart_dvb_streaming(struct work_struct * work)335 static void au0828_restart_dvb_streaming(struct work_struct *work)
336 {
337 struct au0828_dev *dev = container_of(work, struct au0828_dev,
338 restart_streaming);
339 struct au0828_dvb *dvb = &dev->dvb;
340
341 if (!dev->urb_streaming)
342 return;
343
344 dprintk(1, "Restarting streaming...!\n");
345
346 mutex_lock(&dvb->lock);
347
348 /* Stop transport */
349 stop_urb_transfer(dev);
350 au0828_stop_transport(dev, 1);
351
352 /* Start transport */
353 au0828_start_transport(dev);
354 start_urb_transfer(dev);
355
356 mutex_unlock(&dvb->lock);
357 }
358
au0828_set_frontend(struct dvb_frontend * fe)359 static int au0828_set_frontend(struct dvb_frontend *fe)
360 {
361 struct au0828_dev *dev = fe->dvb->priv;
362 struct au0828_dvb *dvb = &dev->dvb;
363 int ret, was_streaming;
364
365 mutex_lock(&dvb->lock);
366 was_streaming = dev->urb_streaming;
367 if (was_streaming) {
368 au0828_stop_transport(dev, 1);
369
370 /*
371 * We can't hold a mutex here, as the restart_streaming
372 * kthread may also hold it.
373 */
374 mutex_unlock(&dvb->lock);
375 cancel_work_sync(&dev->restart_streaming);
376 mutex_lock(&dvb->lock);
377
378 stop_urb_transfer(dev);
379 }
380 mutex_unlock(&dvb->lock);
381
382 ret = dvb->set_frontend(fe);
383
384 if (was_streaming) {
385 mutex_lock(&dvb->lock);
386 au0828_start_transport(dev);
387 start_urb_transfer(dev);
388 mutex_unlock(&dvb->lock);
389 }
390
391 return ret;
392 }
393
dvb_register(struct au0828_dev * dev)394 static int dvb_register(struct au0828_dev *dev)
395 {
396 struct au0828_dvb *dvb = &dev->dvb;
397 int result;
398
399 dprintk(1, "%s()\n", __func__);
400
401 if (preallocate_big_buffers) {
402 int i;
403 for (i = 0; i < URB_COUNT; i++) {
404 dev->dig_transfer_buffer[i] = kzalloc(URB_BUFSIZE,
405 GFP_KERNEL);
406
407 if (!dev->dig_transfer_buffer[i]) {
408 result = -ENOMEM;
409
410 pr_err("failed buffer allocation (errno = %d)\n",
411 result);
412 goto fail_adapter;
413 }
414 }
415 }
416
417 INIT_WORK(&dev->restart_streaming, au0828_restart_dvb_streaming);
418
419 /* register adapter */
420 result = dvb_register_adapter(&dvb->adapter,
421 KBUILD_MODNAME, THIS_MODULE,
422 &dev->usbdev->dev, adapter_nr);
423 if (result < 0) {
424 pr_err("dvb_register_adapter failed (errno = %d)\n",
425 result);
426 goto fail_adapter;
427 }
428
429 #ifdef CONFIG_MEDIA_CONTROLLER_DVB
430 dvb->adapter.mdev = dev->media_dev;
431 #endif
432
433 dvb->adapter.priv = dev;
434
435 /* register frontend */
436 result = dvb_register_frontend(&dvb->adapter, dvb->frontend);
437 if (result < 0) {
438 pr_err("dvb_register_frontend failed (errno = %d)\n",
439 result);
440 goto fail_frontend;
441 }
442
443 /* Hook dvb frontend */
444 dvb->set_frontend = dvb->frontend->ops.set_frontend;
445 dvb->frontend->ops.set_frontend = au0828_set_frontend;
446
447 /* register demux stuff */
448 dvb->demux.dmx.capabilities =
449 DMX_TS_FILTERING | DMX_SECTION_FILTERING |
450 DMX_MEMORY_BASED_FILTERING;
451 dvb->demux.priv = dev;
452 dvb->demux.filternum = 256;
453 dvb->demux.feednum = 256;
454 dvb->demux.start_feed = au0828_dvb_start_feed;
455 dvb->demux.stop_feed = au0828_dvb_stop_feed;
456 result = dvb_dmx_init(&dvb->demux);
457 if (result < 0) {
458 pr_err("dvb_dmx_init failed (errno = %d)\n", result);
459 goto fail_dmx;
460 }
461
462 dvb->dmxdev.filternum = 256;
463 dvb->dmxdev.demux = &dvb->demux.dmx;
464 dvb->dmxdev.capabilities = 0;
465 result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
466 if (result < 0) {
467 pr_err("dvb_dmxdev_init failed (errno = %d)\n", result);
468 goto fail_dmxdev;
469 }
470
471 dvb->fe_hw.source = DMX_FRONTEND_0;
472 result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw);
473 if (result < 0) {
474 pr_err("add_frontend failed (DMX_FRONTEND_0, errno = %d)\n",
475 result);
476 goto fail_fe_hw;
477 }
478
479 dvb->fe_mem.source = DMX_MEMORY_FE;
480 result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem);
481 if (result < 0) {
482 pr_err("add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",
483 result);
484 goto fail_fe_mem;
485 }
486
487 result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw);
488 if (result < 0) {
489 pr_err("connect_frontend failed (errno = %d)\n", result);
490 goto fail_fe_conn;
491 }
492
493 /* register network adapter */
494 dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx);
495
496 dvb->start_count = 0;
497 dvb->stop_count = 0;
498
499 result = dvb_create_media_graph(&dvb->adapter, false);
500 if (result < 0)
501 goto fail_create_graph;
502
503 return 0;
504
505 fail_create_graph:
506 dvb_net_release(&dvb->net);
507 fail_fe_conn:
508 dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
509 fail_fe_mem:
510 dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
511 fail_fe_hw:
512 dvb_dmxdev_release(&dvb->dmxdev);
513 fail_dmxdev:
514 dvb_dmx_release(&dvb->demux);
515 fail_dmx:
516 dvb_unregister_frontend(dvb->frontend);
517 fail_frontend:
518 dvb_frontend_detach(dvb->frontend);
519 dvb_unregister_adapter(&dvb->adapter);
520 fail_adapter:
521
522 if (preallocate_big_buffers) {
523 int i;
524 for (i = 0; i < URB_COUNT; i++)
525 kfree(dev->dig_transfer_buffer[i]);
526 }
527
528 return result;
529 }
530
au0828_dvb_unregister(struct au0828_dev * dev)531 void au0828_dvb_unregister(struct au0828_dev *dev)
532 {
533 struct au0828_dvb *dvb = &dev->dvb;
534
535 dprintk(1, "%s()\n", __func__);
536
537 if (dvb->frontend == NULL)
538 return;
539
540 cancel_work_sync(&dev->restart_streaming);
541
542 dvb_net_release(&dvb->net);
543 dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
544 dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
545 dvb_dmxdev_release(&dvb->dmxdev);
546 dvb_dmx_release(&dvb->demux);
547 dvb_unregister_frontend(dvb->frontend);
548 dvb_frontend_detach(dvb->frontend);
549 dvb_unregister_adapter(&dvb->adapter);
550
551 if (preallocate_big_buffers) {
552 int i;
553 for (i = 0; i < URB_COUNT; i++)
554 kfree(dev->dig_transfer_buffer[i]);
555 }
556 dvb->frontend = NULL;
557 }
558
559 /* All the DVB attach calls go here, this function gets modified
560 * for each new card. No other function in this file needs
561 * to change.
562 */
au0828_dvb_register(struct au0828_dev * dev)563 int au0828_dvb_register(struct au0828_dev *dev)
564 {
565 struct au0828_dvb *dvb = &dev->dvb;
566 int ret;
567
568 dprintk(1, "%s()\n", __func__);
569
570 /* init frontend */
571 switch (dev->boardnr) {
572 case AU0828_BOARD_HAUPPAUGE_HVR850:
573 case AU0828_BOARD_HAUPPAUGE_HVR950Q:
574 dvb->frontend = dvb_attach(au8522_attach,
575 &hauppauge_hvr950q_config,
576 &dev->i2c_adap);
577 if (dvb->frontend != NULL)
578 switch (dev->board.tuner_type) {
579 default:
580 case TUNER_XC5000:
581 dvb_attach(xc5000_attach, dvb->frontend,
582 &dev->i2c_adap,
583 &hauppauge_xc5000a_config);
584 break;
585 case TUNER_XC5000C:
586 dvb_attach(xc5000_attach, dvb->frontend,
587 &dev->i2c_adap,
588 &hauppauge_xc5000c_config);
589 break;
590 }
591 break;
592 case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
593 dvb->frontend = dvb_attach(au8522_attach,
594 &hauppauge_hvr950q_config,
595 &dev->i2c_adap);
596 if (dvb->frontend != NULL)
597 dvb_attach(mxl5007t_attach, dvb->frontend,
598 &dev->i2c_adap, 0x60,
599 &mxl5007t_hvr950q_config);
600 break;
601 case AU0828_BOARD_HAUPPAUGE_WOODBURY:
602 dvb->frontend = dvb_attach(au8522_attach,
603 &hauppauge_woodbury_config,
604 &dev->i2c_adap);
605 if (dvb->frontend != NULL)
606 dvb_attach(tda18271_attach, dvb->frontend,
607 0x60, &dev->i2c_adap,
608 &hauppauge_woodbury_tunerconfig);
609 break;
610 case AU0828_BOARD_DVICO_FUSIONHDTV7:
611 dvb->frontend = dvb_attach(au8522_attach,
612 &fusionhdtv7usb_config,
613 &dev->i2c_adap);
614 if (dvb->frontend != NULL) {
615 dvb_attach(xc5000_attach, dvb->frontend,
616 &dev->i2c_adap,
617 &hauppauge_xc5000a_config);
618 }
619 break;
620 default:
621 pr_warn("The frontend of your DVB/ATSC card isn't supported yet\n");
622 break;
623 }
624 if (NULL == dvb->frontend) {
625 pr_err("%s() Frontend initialization failed\n",
626 __func__);
627 return -1;
628 }
629 /* define general-purpose callback pointer */
630 dvb->frontend->callback = au0828_tuner_callback;
631
632 /* register everything */
633 ret = dvb_register(dev);
634 if (ret < 0) {
635 if (dvb->frontend->ops.release)
636 dvb->frontend->ops.release(dvb->frontend);
637 dvb->frontend = NULL;
638 return ret;
639 }
640
641 timer_setup(&dev->bulk_timeout, au0828_bulk_timeout, 0);
642
643 return 0;
644 }
645
au0828_dvb_suspend(struct au0828_dev * dev)646 void au0828_dvb_suspend(struct au0828_dev *dev)
647 {
648 struct au0828_dvb *dvb = &dev->dvb;
649 int rc;
650
651 if (dvb->frontend) {
652 if (dev->urb_streaming) {
653 cancel_work_sync(&dev->restart_streaming);
654 /* Stop transport */
655 mutex_lock(&dvb->lock);
656 stop_urb_transfer(dev);
657 au0828_stop_transport(dev, 1);
658 mutex_unlock(&dvb->lock);
659 dev->need_urb_start = true;
660 }
661 /* suspend frontend - does tuner and fe to sleep */
662 rc = dvb_frontend_suspend(dvb->frontend);
663 pr_info("au0828_dvb_suspend(): Suspending DVB fe %d\n", rc);
664 }
665 }
666
au0828_dvb_resume(struct au0828_dev * dev)667 void au0828_dvb_resume(struct au0828_dev *dev)
668 {
669 struct au0828_dvb *dvb = &dev->dvb;
670 int rc;
671
672 if (dvb->frontend) {
673 /* resume frontend - does fe and tuner init */
674 rc = dvb_frontend_resume(dvb->frontend);
675 pr_info("au0828_dvb_resume(): Resuming DVB fe %d\n", rc);
676 if (dev->need_urb_start) {
677 /* Start transport */
678 mutex_lock(&dvb->lock);
679 au0828_start_transport(dev);
680 start_urb_transfer(dev);
681 mutex_unlock(&dvb->lock);
682 }
683 }
684 }
685