1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3 * Remote Controller core header
4 *
5 * Copyright (C) 2009-2010 by Mauro Carvalho Chehab
6 */
7
8 #ifndef _RC_CORE
9 #define _RC_CORE
10
11 #include <linux/spinlock.h>
12 #include <linux/cdev.h>
13 #include <linux/kfifo.h>
14 #include <linux/time.h>
15 #include <linux/timer.h>
16 #include <media/rc-map.h>
17
18 /**
19 * enum rc_driver_type - type of the RC driver.
20 *
21 * @RC_DRIVER_SCANCODE: Driver or hardware generates a scancode.
22 * @RC_DRIVER_IR_RAW: Driver or hardware generates pulse/space sequences.
23 * It needs a Infra-Red pulse/space decoder
24 * @RC_DRIVER_IR_RAW_TX: Device transmitter only,
25 * driver requires pulse/space data sequence.
26 */
27 enum rc_driver_type {
28 RC_DRIVER_SCANCODE = 0,
29 RC_DRIVER_IR_RAW,
30 RC_DRIVER_IR_RAW_TX,
31 };
32
33 /**
34 * struct rc_scancode_filter - Filter scan codes.
35 * @data: Scancode data to match.
36 * @mask: Mask of bits of scancode to compare.
37 */
38 struct rc_scancode_filter {
39 u32 data;
40 u32 mask;
41 };
42
43 /**
44 * enum rc_filter_type - Filter type constants.
45 * @RC_FILTER_NORMAL: Filter for normal operation.
46 * @RC_FILTER_WAKEUP: Filter for waking from suspend.
47 * @RC_FILTER_MAX: Number of filter types.
48 */
49 enum rc_filter_type {
50 RC_FILTER_NORMAL = 0,
51 RC_FILTER_WAKEUP,
52
53 RC_FILTER_MAX
54 };
55
56 /**
57 * struct lirc_fh - represents an open lirc file
58 * @list: list of open file handles
59 * @rc: rcdev for this lirc chardev
60 * @carrier_low: when setting the carrier range, first the low end must be
61 * set with an ioctl and then the high end with another ioctl
62 * @send_timeout_reports: report timeouts in lirc raw IR.
63 * @rawir: queue for incoming raw IR
64 * @scancodes: queue for incoming decoded scancodes
65 * @wait_poll: poll struct for lirc device
66 * @send_mode: lirc mode for sending, either LIRC_MODE_SCANCODE or
67 * LIRC_MODE_PULSE
68 * @rec_mode: lirc mode for receiving, either LIRC_MODE_SCANCODE or
69 * LIRC_MODE_MODE2
70 */
71 struct lirc_fh {
72 struct list_head list;
73 struct rc_dev *rc;
74 int carrier_low;
75 bool send_timeout_reports;
76 DECLARE_KFIFO_PTR(rawir, unsigned int);
77 DECLARE_KFIFO_PTR(scancodes, struct lirc_scancode);
78 wait_queue_head_t wait_poll;
79 u8 send_mode;
80 u8 rec_mode;
81 };
82
83 /**
84 * struct rc_dev - represents a remote control device
85 * @dev: driver model's view of this device
86 * @managed_alloc: devm_rc_allocate_device was used to create rc_dev
87 * @sysfs_groups: sysfs attribute groups
88 * @device_name: name of the rc child device
89 * @input_phys: physical path to the input child device
90 * @input_id: id of the input child device (struct input_id)
91 * @driver_name: name of the hardware driver which registered this device
92 * @map_name: name of the default keymap
93 * @rc_map: current scan/key table
94 * @lock: used to ensure we've filled in all protocol details before
95 * anyone can call show_protocols or store_protocols
96 * @minor: unique minor remote control device number
97 * @raw: additional data for raw pulse/space devices
98 * @input_dev: the input child device used to communicate events to userspace
99 * @driver_type: specifies if protocol decoding is done in hardware or software
100 * @idle: used to keep track of RX state
101 * @encode_wakeup: wakeup filtering uses IR encode API, therefore the allowed
102 * wakeup protocols is the set of all raw encoders
103 * @allowed_protocols: bitmask with the supported RC_PROTO_BIT_* protocols
104 * @enabled_protocols: bitmask with the enabled RC_PROTO_BIT_* protocols
105 * @allowed_wakeup_protocols: bitmask with the supported RC_PROTO_BIT_* wakeup
106 * protocols
107 * @wakeup_protocol: the enabled RC_PROTO_* wakeup protocol or
108 * RC_PROTO_UNKNOWN if disabled.
109 * @scancode_filter: scancode filter
110 * @scancode_wakeup_filter: scancode wakeup filters
111 * @scancode_mask: some hardware decoders are not capable of providing the full
112 * scancode to the application. As this is a hardware limit, we can't do
113 * anything with it. Yet, as the same keycode table can be used with other
114 * devices, a mask is provided to allow its usage. Drivers should generally
115 * leave this field in blank
116 * @users: number of current users of the device
117 * @priv: driver-specific data
118 * @keylock: protects the remaining members of the struct
119 * @keypressed: whether a key is currently pressed
120 * @keyup_jiffies: time (in jiffies) when the current keypress should be released
121 * @timer_keyup: timer for releasing a keypress
122 * @timer_repeat: timer for autorepeat events. This is needed for CEC, which
123 * has non-standard repeats.
124 * @last_keycode: keycode of last keypress
125 * @last_protocol: protocol of last keypress
126 * @last_scancode: scancode of last keypress
127 * @last_toggle: toggle value of last command
128 * @timeout: optional time after which device stops sending data
129 * @min_timeout: minimum timeout supported by device
130 * @max_timeout: maximum timeout supported by device
131 * @rx_resolution : resolution (in us) of input sampler
132 * @tx_resolution: resolution (in us) of output sampler
133 * @lirc_dev: lirc device
134 * @lirc_cdev: lirc char cdev
135 * @gap_start: time when gap starts
136 * @gap_duration: duration of initial gap
137 * @gap: true if we're in a gap
138 * @lirc_fh_lock: protects lirc_fh list
139 * @lirc_fh: list of open files
140 * @registered: set to true by rc_register_device(), false by
141 * rc_unregister_device
142 * @change_protocol: allow changing the protocol used on hardware decoders
143 * @open: callback to allow drivers to enable polling/irq when IR input device
144 * is opened.
145 * @close: callback to allow drivers to disable polling/irq when IR input device
146 * is opened.
147 * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
148 * @s_tx_carrier: set transmit carrier frequency
149 * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%)
150 * @s_rx_carrier_range: inform driver about carrier it is expected to handle
151 * @tx_ir: transmit IR
152 * @s_idle: enable/disable hardware idle mode, upon which,
153 * device doesn't interrupt host until it sees IR pulses
154 * @s_wideband_receiver: enable wide band receiver used for learning
155 * @s_carrier_report: enable carrier reports
156 * @s_filter: set the scancode filter
157 * @s_wakeup_filter: set the wakeup scancode filter. If the mask is zero
158 * then wakeup should be disabled. wakeup_protocol will be set to
159 * a valid protocol if mask is nonzero.
160 * @s_timeout: set hardware timeout in us
161 */
162 struct rc_dev {
163 struct device dev;
164 bool managed_alloc;
165 const struct attribute_group *sysfs_groups[5];
166 const char *device_name;
167 const char *input_phys;
168 struct input_id input_id;
169 const char *driver_name;
170 const char *map_name;
171 struct rc_map rc_map;
172 struct mutex lock;
173 unsigned int minor;
174 struct ir_raw_event_ctrl *raw;
175 struct input_dev *input_dev;
176 enum rc_driver_type driver_type;
177 bool idle;
178 bool encode_wakeup;
179 u64 allowed_protocols;
180 u64 enabled_protocols;
181 u64 allowed_wakeup_protocols;
182 enum rc_proto wakeup_protocol;
183 struct rc_scancode_filter scancode_filter;
184 struct rc_scancode_filter scancode_wakeup_filter;
185 u32 scancode_mask;
186 u32 users;
187 void *priv;
188 spinlock_t keylock;
189 bool keypressed;
190 unsigned long keyup_jiffies;
191 struct timer_list timer_keyup;
192 struct timer_list timer_repeat;
193 u32 last_keycode;
194 enum rc_proto last_protocol;
195 u64 last_scancode;
196 u8 last_toggle;
197 u32 timeout;
198 u32 min_timeout;
199 u32 max_timeout;
200 u32 rx_resolution;
201 u32 tx_resolution;
202 #ifdef CONFIG_LIRC
203 struct device lirc_dev;
204 struct cdev lirc_cdev;
205 ktime_t gap_start;
206 u64 gap_duration;
207 bool gap;
208 spinlock_t lirc_fh_lock;
209 struct list_head lirc_fh;
210 #endif
211 bool registered;
212 int (*change_protocol)(struct rc_dev *dev, u64 *rc_proto);
213 int (*open)(struct rc_dev *dev);
214 void (*close)(struct rc_dev *dev);
215 int (*s_tx_mask)(struct rc_dev *dev, u32 mask);
216 int (*s_tx_carrier)(struct rc_dev *dev, u32 carrier);
217 int (*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle);
218 int (*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max);
219 int (*tx_ir)(struct rc_dev *dev, unsigned *txbuf, unsigned n);
220 void (*s_idle)(struct rc_dev *dev, bool enable);
221 int (*s_wideband_receiver)(struct rc_dev *dev, int enable);
222 int (*s_carrier_report) (struct rc_dev *dev, int enable);
223 int (*s_filter)(struct rc_dev *dev,
224 struct rc_scancode_filter *filter);
225 int (*s_wakeup_filter)(struct rc_dev *dev,
226 struct rc_scancode_filter *filter);
227 int (*s_timeout)(struct rc_dev *dev,
228 unsigned int timeout);
229 };
230
231 #define to_rc_dev(d) container_of(d, struct rc_dev, dev)
232
233 /*
234 * From rc-main.c
235 * Those functions can be used on any type of Remote Controller. They
236 * basically creates an input_dev and properly reports the device as a
237 * Remote Controller, at sys/class/rc.
238 */
239
240 /**
241 * rc_allocate_device - Allocates a RC device
242 *
243 * @rc_driver_type: specifies the type of the RC output to be allocated
244 * returns a pointer to struct rc_dev.
245 */
246 struct rc_dev *rc_allocate_device(enum rc_driver_type);
247
248 /**
249 * devm_rc_allocate_device - Managed RC device allocation
250 *
251 * @dev: pointer to struct device
252 * @rc_driver_type: specifies the type of the RC output to be allocated
253 * returns a pointer to struct rc_dev.
254 */
255 struct rc_dev *devm_rc_allocate_device(struct device *dev, enum rc_driver_type);
256
257 /**
258 * rc_free_device - Frees a RC device
259 *
260 * @dev: pointer to struct rc_dev.
261 */
262 void rc_free_device(struct rc_dev *dev);
263
264 /**
265 * rc_register_device - Registers a RC device
266 *
267 * @dev: pointer to struct rc_dev.
268 */
269 int rc_register_device(struct rc_dev *dev);
270
271 /**
272 * devm_rc_register_device - Manageded registering of a RC device
273 *
274 * @parent: pointer to struct device.
275 * @dev: pointer to struct rc_dev.
276 */
277 int devm_rc_register_device(struct device *parent, struct rc_dev *dev);
278
279 /**
280 * rc_unregister_device - Unregisters a RC device
281 *
282 * @dev: pointer to struct rc_dev.
283 */
284 void rc_unregister_device(struct rc_dev *dev);
285
286 void rc_repeat(struct rc_dev *dev);
287 void rc_keydown(struct rc_dev *dev, enum rc_proto protocol, u64 scancode,
288 u8 toggle);
289 void rc_keydown_notimeout(struct rc_dev *dev, enum rc_proto protocol,
290 u64 scancode, u8 toggle);
291 void rc_keyup(struct rc_dev *dev);
292 u32 rc_g_keycode_from_table(struct rc_dev *dev, u64 scancode);
293
294 /*
295 * From rc-raw.c
296 * The Raw interface is specific to InfraRed. It may be a good idea to
297 * split it later into a separate header.
298 */
299 struct ir_raw_event {
300 union {
301 u32 duration;
302 u32 carrier;
303 };
304 u8 duty_cycle;
305
306 unsigned pulse:1;
307 unsigned reset:1;
308 unsigned timeout:1;
309 unsigned carrier_report:1;
310 };
311
312 #define US_TO_NS(usec) ((usec) * 1000)
313 #define MS_TO_US(msec) ((msec) * 1000)
314 #define IR_MAX_DURATION MS_TO_US(500)
315 #define IR_DEFAULT_TIMEOUT MS_TO_US(125)
316 #define IR_MAX_TIMEOUT LIRC_VALUE_MASK
317
318 void ir_raw_event_handle(struct rc_dev *dev);
319 int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev);
320 int ir_raw_event_store_edge(struct rc_dev *dev, bool pulse);
321 int ir_raw_event_store_with_filter(struct rc_dev *dev,
322 struct ir_raw_event *ev);
323 int ir_raw_event_store_with_timeout(struct rc_dev *dev,
324 struct ir_raw_event *ev);
325 void ir_raw_event_set_idle(struct rc_dev *dev, bool idle);
326 int ir_raw_encode_scancode(enum rc_proto protocol, u32 scancode,
327 struct ir_raw_event *events, unsigned int max);
328 int ir_raw_encode_carrier(enum rc_proto protocol);
329
ir_raw_event_reset(struct rc_dev * dev)330 static inline void ir_raw_event_reset(struct rc_dev *dev)
331 {
332 ir_raw_event_store(dev, &((struct ir_raw_event) { .reset = true }));
333 dev->idle = true;
334 ir_raw_event_handle(dev);
335 }
336
337 /* extract mask bits out of data and pack them into the result */
ir_extract_bits(u32 data,u32 mask)338 static inline u32 ir_extract_bits(u32 data, u32 mask)
339 {
340 u32 vbit = 1, value = 0;
341
342 do {
343 if (mask & 1) {
344 if (data & 1)
345 value |= vbit;
346 vbit <<= 1;
347 }
348 data >>= 1;
349 } while (mask >>= 1);
350
351 return value;
352 }
353
354 /* Get NEC scancode and protocol type from address and command bytes */
ir_nec_bytes_to_scancode(u8 address,u8 not_address,u8 command,u8 not_command,enum rc_proto * protocol)355 static inline u32 ir_nec_bytes_to_scancode(u8 address, u8 not_address,
356 u8 command, u8 not_command,
357 enum rc_proto *protocol)
358 {
359 u32 scancode;
360
361 if ((command ^ not_command) != 0xff) {
362 /* NEC transport, but modified protocol, used by at
363 * least Apple and TiVo remotes
364 */
365 scancode = not_address << 24 |
366 address << 16 |
367 not_command << 8 |
368 command;
369 *protocol = RC_PROTO_NEC32;
370 } else if ((address ^ not_address) != 0xff) {
371 /* Extended NEC */
372 scancode = address << 16 |
373 not_address << 8 |
374 command;
375 *protocol = RC_PROTO_NECX;
376 } else {
377 /* Normal NEC */
378 scancode = address << 8 | command;
379 *protocol = RC_PROTO_NEC;
380 }
381
382 return scancode;
383 }
384
385 #endif /* _RC_CORE */
386