1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Porting to u-boot:
4  *
5  * (C) Copyright 2010
6  * Stefano Babic, DENX Software Engineering, sbabic@denx.de
7  *
8  * Linux IPU driver for MX51:
9  *
10  * (C) Copyright 2005-2010 Freescale Semiconductor, Inc.
11  */
12 
13 /* #define DEBUG */
14 #include <common.h>
15 #include <log.h>
16 #include <linux/delay.h>
17 #include <linux/types.h>
18 #include <linux/err.h>
19 #include <asm/io.h>
20 #include <linux/errno.h>
21 #include <asm/arch/imx-regs.h>
22 #include <asm/arch/crm_regs.h>
23 #include <asm/arch/sys_proto.h>
24 #include <div64.h>
25 #include "ipu.h"
26 #include "ipu_regs.h"
27 
28 extern struct mxc_ccm_reg *mxc_ccm;
29 extern u32 *ipu_cpmem_base;
30 
31 struct ipu_ch_param_word {
32 	uint32_t data[5];
33 	uint32_t res[3];
34 };
35 
36 struct ipu_ch_param {
37 	struct ipu_ch_param_word word[2];
38 };
39 
40 #define ipu_ch_param_addr(ch) (((struct ipu_ch_param *)ipu_cpmem_base) + (ch))
41 
42 #define _param_word(base, w) \
43 	(((struct ipu_ch_param *)(base))->word[(w)].data)
44 
45 #define ipu_ch_param_set_field(base, w, bit, size, v) { \
46 	int i = (bit) / 32; \
47 	int off = (bit) % 32; \
48 	_param_word(base, w)[i] |= (v) << off; \
49 	if (((bit) + (size) - 1) / 32 > i) { \
50 		_param_word(base, w)[i + 1] |= (v) >> (off ? (32 - off) : 0); \
51 	} \
52 }
53 
54 #define ipu_ch_param_mod_field(base, w, bit, size, v) { \
55 	int i = (bit) / 32; \
56 	int off = (bit) % 32; \
57 	u32 mask = (1UL << size) - 1; \
58 	u32 temp = _param_word(base, w)[i]; \
59 	temp &= ~(mask << off); \
60 	_param_word(base, w)[i] = temp | (v) << off; \
61 	if (((bit) + (size) - 1) / 32 > i) { \
62 		temp = _param_word(base, w)[i + 1]; \
63 		temp &= ~(mask >> (32 - off)); \
64 		_param_word(base, w)[i + 1] = \
65 			temp | ((v) >> (off ? (32 - off) : 0)); \
66 	} \
67 }
68 
69 #define ipu_ch_param_read_field(base, w, bit, size) ({ \
70 	u32 temp2; \
71 	int i = (bit) / 32; \
72 	int off = (bit) % 32; \
73 	u32 mask = (1UL << size) - 1; \
74 	u32 temp1 = _param_word(base, w)[i]; \
75 	temp1 = mask & (temp1 >> off); \
76 	if (((bit)+(size) - 1) / 32 > i) { \
77 		temp2 = _param_word(base, w)[i + 1]; \
78 		temp2 &= mask >> (off ? (32 - off) : 0); \
79 		temp1 |= temp2 << (off ? (32 - off) : 0); \
80 	} \
81 	temp1; \
82 })
83 
84 #define IPU_SW_RST_TOUT_USEC	(10000)
85 
86 #define IPUV3_CLK_MX51		133000000
87 #define IPUV3_CLK_MX53		200000000
88 #define IPUV3_CLK_MX6Q		264000000
89 #define IPUV3_CLK_MX6DL		198000000
90 
clk_enable(struct clk * clk)91 void clk_enable(struct clk *clk)
92 {
93 	if (clk) {
94 		if (clk->usecount++ == 0) {
95 			clk->enable(clk);
96 		}
97 	}
98 }
99 
clk_disable(struct clk * clk)100 void clk_disable(struct clk *clk)
101 {
102 	if (clk) {
103 		if (!(--clk->usecount)) {
104 			if (clk->disable)
105 				clk->disable(clk);
106 		}
107 	}
108 }
109 
clk_get_usecount(struct clk * clk)110 int clk_get_usecount(struct clk *clk)
111 {
112 	if (clk == NULL)
113 		return 0;
114 
115 	return clk->usecount;
116 }
117 
clk_get_rate(struct clk * clk)118 u32 clk_get_rate(struct clk *clk)
119 {
120 	if (!clk)
121 		return 0;
122 
123 	return clk->rate;
124 }
125 
clk_get_parent(struct clk * clk)126 struct clk *clk_get_parent(struct clk *clk)
127 {
128 	if (!clk)
129 		return 0;
130 
131 	return clk->parent;
132 }
133 
clk_set_rate(struct clk * clk,unsigned long rate)134 int clk_set_rate(struct clk *clk, unsigned long rate)
135 {
136 	if (!clk)
137 		return 0;
138 
139 	if (clk->set_rate)
140 		clk->set_rate(clk, rate);
141 
142 	return clk->rate;
143 }
144 
clk_round_rate(struct clk * clk,unsigned long rate)145 long clk_round_rate(struct clk *clk, unsigned long rate)
146 {
147 	if (clk == NULL || !clk->round_rate)
148 		return 0;
149 
150 	return clk->round_rate(clk, rate);
151 }
152 
clk_set_parent(struct clk * clk,struct clk * parent)153 int clk_set_parent(struct clk *clk, struct clk *parent)
154 {
155 	clk->parent = parent;
156 	if (clk->set_parent)
157 		return clk->set_parent(clk, parent);
158 	return 0;
159 }
160 
clk_ipu_enable(struct clk * clk)161 static int clk_ipu_enable(struct clk *clk)
162 {
163 	u32 reg;
164 
165 	reg = __raw_readl(clk->enable_reg);
166 	reg |= MXC_CCM_CCGR_CG_MASK << clk->enable_shift;
167 	__raw_writel(reg, clk->enable_reg);
168 
169 #if defined(CONFIG_MX51) || defined(CONFIG_MX53)
170 	/* Handshake with IPU when certain clock rates are changed. */
171 	reg = __raw_readl(&mxc_ccm->ccdr);
172 	reg &= ~MXC_CCM_CCDR_IPU_HS_MASK;
173 	__raw_writel(reg, &mxc_ccm->ccdr);
174 
175 	/* Handshake with IPU when LPM is entered as its enabled. */
176 	reg = __raw_readl(&mxc_ccm->clpcr);
177 	reg &= ~MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS;
178 	__raw_writel(reg, &mxc_ccm->clpcr);
179 #endif
180 	return 0;
181 }
182 
clk_ipu_disable(struct clk * clk)183 static void clk_ipu_disable(struct clk *clk)
184 {
185 	u32 reg;
186 
187 	reg = __raw_readl(clk->enable_reg);
188 	reg &= ~(MXC_CCM_CCGR_CG_MASK << clk->enable_shift);
189 	__raw_writel(reg, clk->enable_reg);
190 
191 #if defined(CONFIG_MX51) || defined(CONFIG_MX53)
192 	/*
193 	 * No handshake with IPU whe dividers are changed
194 	 * as its not enabled.
195 	 */
196 	reg = __raw_readl(&mxc_ccm->ccdr);
197 	reg |= MXC_CCM_CCDR_IPU_HS_MASK;
198 	__raw_writel(reg, &mxc_ccm->ccdr);
199 
200 	/* No handshake with IPU when LPM is entered as its not enabled. */
201 	reg = __raw_readl(&mxc_ccm->clpcr);
202 	reg |= MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS;
203 	__raw_writel(reg, &mxc_ccm->clpcr);
204 #endif
205 }
206 
207 
208 static struct clk ipu_clk = {
209 	.name = "ipu_clk",
210 #if defined(CONFIG_MX51) || defined(CONFIG_MX53)
211 	.enable_reg = (u32 *)(CCM_BASE_ADDR +
212 		offsetof(struct mxc_ccm_reg, CCGR5)),
213 	.enable_shift = MXC_CCM_CCGR5_IPU_OFFSET,
214 #else
215 	.enable_reg = (u32 *)(CCM_BASE_ADDR +
216 		offsetof(struct mxc_ccm_reg, CCGR3)),
217 	.enable_shift = MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET,
218 #endif
219 	.enable = clk_ipu_enable,
220 	.disable = clk_ipu_disable,
221 	.usecount = 0,
222 };
223 
224 #if !defined CONFIG_SYS_LDB_CLOCK
225 #define CONFIG_SYS_LDB_CLOCK 65000000
226 #endif
227 
228 static struct clk ldb_clk = {
229 	.name = "ldb_clk",
230 	.rate = CONFIG_SYS_LDB_CLOCK,
231 	.usecount = 0,
232 };
233 
234 /* Globals */
235 struct clk *g_ipu_clk;
236 struct clk *g_ldb_clk;
237 unsigned char g_ipu_clk_enabled;
238 struct clk *g_di_clk[2];
239 struct clk *g_pixel_clk[2];
240 unsigned char g_dc_di_assignment[10];
241 uint32_t g_channel_init_mask;
242 uint32_t g_channel_enable_mask;
243 
244 static int ipu_dc_use_count;
245 static int ipu_dp_use_count;
246 static int ipu_dmfc_use_count;
247 static int ipu_di_use_count[2];
248 
249 u32 *ipu_cpmem_base;
250 u32 *ipu_dc_tmpl_reg;
251 
252 /* Static functions */
253 
ipu_ch_param_set_high_priority(uint32_t ch)254 static inline void ipu_ch_param_set_high_priority(uint32_t ch)
255 {
256 	ipu_ch_param_mod_field(ipu_ch_param_addr(ch), 1, 93, 2, 1);
257 };
258 
channel_2_dma(ipu_channel_t ch,ipu_buffer_t type)259 static inline uint32_t channel_2_dma(ipu_channel_t ch, ipu_buffer_t type)
260 {
261 	return ((uint32_t) ch >> (6 * type)) & 0x3F;
262 };
263 
264 /* Either DP BG or DP FG can be graphic window */
ipu_is_dp_graphic_chan(uint32_t dma_chan)265 static inline int ipu_is_dp_graphic_chan(uint32_t dma_chan)
266 {
267 	return (dma_chan == 23 || dma_chan == 27);
268 }
269 
ipu_is_dmfc_chan(uint32_t dma_chan)270 static inline int ipu_is_dmfc_chan(uint32_t dma_chan)
271 {
272 	return ((dma_chan >= 23) && (dma_chan <= 29));
273 }
274 
275 
ipu_ch_param_set_buffer(uint32_t ch,int bufNum,dma_addr_t phyaddr)276 static inline void ipu_ch_param_set_buffer(uint32_t ch, int bufNum,
277 					    dma_addr_t phyaddr)
278 {
279 	ipu_ch_param_mod_field(ipu_ch_param_addr(ch), 1, 29 * bufNum, 29,
280 			       phyaddr / 8);
281 };
282 
283 #define idma_is_valid(ch)	(ch != NO_DMA)
284 #define idma_mask(ch)		(idma_is_valid(ch) ? (1UL << (ch & 0x1F)) : 0)
285 #define idma_is_set(reg, dma)	(__raw_readl(reg(dma)) & idma_mask(dma))
286 
ipu_pixel_clk_recalc(struct clk * clk)287 static void ipu_pixel_clk_recalc(struct clk *clk)
288 {
289 	u32 div;
290 	u64 final_rate = (unsigned long long)clk->parent->rate * 16;
291 
292 	div = __raw_readl(DI_BS_CLKGEN0(clk->id));
293 	debug("read BS_CLKGEN0 div:%d, final_rate:%lld, prate:%ld\n",
294 	      div, final_rate, clk->parent->rate);
295 
296 	clk->rate = 0;
297 	if (div != 0) {
298 		do_div(final_rate, div);
299 		clk->rate = final_rate;
300 	}
301 }
302 
ipu_pixel_clk_round_rate(struct clk * clk,unsigned long rate)303 static unsigned long ipu_pixel_clk_round_rate(struct clk *clk,
304 	unsigned long rate)
305 {
306 	u64 div, final_rate;
307 	u32 remainder;
308 	u64 parent_rate = (unsigned long long)clk->parent->rate * 16;
309 
310 	/*
311 	 * Calculate divider
312 	 * Fractional part is 4 bits,
313 	 * so simply multiply by 2^4 to get fractional part.
314 	 */
315 	div = parent_rate;
316 	remainder = do_div(div, rate);
317 	/* Round the divider value */
318 	if (remainder > (rate / 2))
319 		div++;
320 	if (div < 0x10)            /* Min DI disp clock divider is 1 */
321 		div = 0x10;
322 	if (div & ~0xFEF)
323 		div &= 0xFF8;
324 	else {
325 		/* Round up divider if it gets us closer to desired pix clk */
326 		if ((div & 0xC) == 0xC) {
327 			div += 0x10;
328 			div &= ~0xF;
329 		}
330 	}
331 	final_rate = parent_rate;
332 	do_div(final_rate, div);
333 
334 	return final_rate;
335 }
336 
ipu_pixel_clk_set_rate(struct clk * clk,unsigned long rate)337 static int ipu_pixel_clk_set_rate(struct clk *clk, unsigned long rate)
338 {
339 	u64 div, parent_rate;
340 	u32 remainder;
341 
342 	parent_rate = (unsigned long long)clk->parent->rate * 16;
343 	div = parent_rate;
344 	remainder = do_div(div, rate);
345 	/* Round the divider value */
346 	if (remainder > (rate / 2))
347 		div++;
348 
349 	/* Round up divider if it gets us closer to desired pix clk */
350 	if ((div & 0xC) == 0xC) {
351 		div += 0x10;
352 		div &= ~0xF;
353 	}
354 	if (div > 0x1000)
355 		debug("Overflow, DI_BS_CLKGEN0 div:0x%x\n", (u32)div);
356 
357 	__raw_writel(div, DI_BS_CLKGEN0(clk->id));
358 
359 	/*
360 	 * Setup pixel clock timing
361 	 * Down time is half of period
362 	 */
363 	__raw_writel((div / 16) << 16, DI_BS_CLKGEN1(clk->id));
364 
365 	do_div(parent_rate, div);
366 
367 	clk->rate = parent_rate;
368 
369 	return 0;
370 }
371 
ipu_pixel_clk_enable(struct clk * clk)372 static int ipu_pixel_clk_enable(struct clk *clk)
373 {
374 	u32 disp_gen = __raw_readl(IPU_DISP_GEN);
375 	disp_gen |= clk->id ? DI1_COUNTER_RELEASE : DI0_COUNTER_RELEASE;
376 	__raw_writel(disp_gen, IPU_DISP_GEN);
377 
378 	return 0;
379 }
380 
ipu_pixel_clk_disable(struct clk * clk)381 static void ipu_pixel_clk_disable(struct clk *clk)
382 {
383 	u32 disp_gen = __raw_readl(IPU_DISP_GEN);
384 	disp_gen &= clk->id ? ~DI1_COUNTER_RELEASE : ~DI0_COUNTER_RELEASE;
385 	__raw_writel(disp_gen, IPU_DISP_GEN);
386 
387 }
388 
ipu_pixel_clk_set_parent(struct clk * clk,struct clk * parent)389 static int ipu_pixel_clk_set_parent(struct clk *clk, struct clk *parent)
390 {
391 	u32 di_gen = __raw_readl(DI_GENERAL(clk->id));
392 
393 	if (parent == g_ipu_clk)
394 		di_gen &= ~DI_GEN_DI_CLK_EXT;
395 	else if (!IS_ERR(g_di_clk[clk->id]) && parent == g_ldb_clk)
396 		di_gen |= DI_GEN_DI_CLK_EXT;
397 	else
398 		return -EINVAL;
399 
400 	__raw_writel(di_gen, DI_GENERAL(clk->id));
401 	ipu_pixel_clk_recalc(clk);
402 	return 0;
403 }
404 
405 static struct clk pixel_clk[] = {
406 	{
407 	.name = "pixel_clk",
408 	.id = 0,
409 	.recalc = ipu_pixel_clk_recalc,
410 	.set_rate = ipu_pixel_clk_set_rate,
411 	.round_rate = ipu_pixel_clk_round_rate,
412 	.set_parent = ipu_pixel_clk_set_parent,
413 	.enable = ipu_pixel_clk_enable,
414 	.disable = ipu_pixel_clk_disable,
415 	.usecount = 0,
416 	},
417 	{
418 	.name = "pixel_clk",
419 	.id = 1,
420 	.recalc = ipu_pixel_clk_recalc,
421 	.set_rate = ipu_pixel_clk_set_rate,
422 	.round_rate = ipu_pixel_clk_round_rate,
423 	.set_parent = ipu_pixel_clk_set_parent,
424 	.enable = ipu_pixel_clk_enable,
425 	.disable = ipu_pixel_clk_disable,
426 	.usecount = 0,
427 	},
428 };
429 
430 /*
431  * This function resets IPU
432  */
ipu_reset(void)433 static void ipu_reset(void)
434 {
435 	u32 *reg;
436 	u32 value;
437 	int timeout = IPU_SW_RST_TOUT_USEC;
438 
439 	reg = (u32 *)SRC_BASE_ADDR;
440 	value = __raw_readl(reg);
441 	value = value | SW_IPU_RST;
442 	__raw_writel(value, reg);
443 
444 	while (__raw_readl(reg) & SW_IPU_RST) {
445 		udelay(1);
446 		if (!(timeout--)) {
447 			printf("ipu software reset timeout\n");
448 			break;
449 		}
450 	};
451 }
452 
453 /*
454  * This function is called by the driver framework to initialize the IPU
455  * hardware.
456  *
457  * @param	dev	The device structure for the IPU passed in by the
458  *			driver framework.
459  *
460  * @return      Returns 0 on success or negative error code on error
461  */
ipu_probe(void)462 int ipu_probe(void)
463 {
464 	unsigned long ipu_base;
465 #if defined CONFIG_MX51
466 	u32 temp;
467 
468 	u32 *reg_hsc_mcd = (u32 *)MIPI_HSC_BASE_ADDR;
469 	u32 *reg_hsc_mxt_conf = (u32 *)(MIPI_HSC_BASE_ADDR + 0x800);
470 
471 	 __raw_writel(0xF00, reg_hsc_mcd);
472 
473 	/* CSI mode reserved*/
474 	temp = __raw_readl(reg_hsc_mxt_conf);
475 	 __raw_writel(temp | 0x0FF, reg_hsc_mxt_conf);
476 
477 	temp = __raw_readl(reg_hsc_mxt_conf);
478 	__raw_writel(temp | 0x10000, reg_hsc_mxt_conf);
479 #endif
480 
481 	ipu_base = IPU_CTRL_BASE_ADDR;
482 	ipu_cpmem_base = (u32 *)(ipu_base + IPU_CPMEM_REG_BASE);
483 	ipu_dc_tmpl_reg = (u32 *)(ipu_base + IPU_DC_TMPL_REG_BASE);
484 
485 	g_pixel_clk[0] = &pixel_clk[0];
486 	g_pixel_clk[1] = &pixel_clk[1];
487 
488 	g_ipu_clk = &ipu_clk;
489 #if defined(CONFIG_MX51)
490 	g_ipu_clk->rate = IPUV3_CLK_MX51;
491 #elif defined(CONFIG_MX53)
492 	g_ipu_clk->rate = IPUV3_CLK_MX53;
493 #else
494 	g_ipu_clk->rate = is_mx6sdl() ? IPUV3_CLK_MX6DL : IPUV3_CLK_MX6Q;
495 #endif
496 	debug("ipu_clk = %u\n", clk_get_rate(g_ipu_clk));
497 	g_ldb_clk = &ldb_clk;
498 	debug("ldb_clk = %u\n", clk_get_rate(g_ldb_clk));
499 	ipu_reset();
500 
501 	clk_set_parent(g_pixel_clk[0], g_ipu_clk);
502 	clk_set_parent(g_pixel_clk[1], g_ipu_clk);
503 	clk_enable(g_ipu_clk);
504 
505 	g_di_clk[0] = NULL;
506 	g_di_clk[1] = NULL;
507 
508 	__raw_writel(0x807FFFFF, IPU_MEM_RST);
509 	while (__raw_readl(IPU_MEM_RST) & 0x80000000)
510 		;
511 
512 	ipu_init_dc_mappings();
513 
514 	__raw_writel(0, IPU_INT_CTRL(5));
515 	__raw_writel(0, IPU_INT_CTRL(6));
516 	__raw_writel(0, IPU_INT_CTRL(9));
517 	__raw_writel(0, IPU_INT_CTRL(10));
518 
519 	/* DMFC Init */
520 	ipu_dmfc_init(DMFC_NORMAL, 1);
521 
522 	/* Set sync refresh channels as high priority */
523 	__raw_writel(0x18800000L, IDMAC_CHA_PRI(0));
524 
525 	/* Set MCU_T to divide MCU access window into 2 */
526 	__raw_writel(0x00400000L | (IPU_MCU_T_DEFAULT << 18), IPU_DISP_GEN);
527 
528 	clk_disable(g_ipu_clk);
529 
530 	return 0;
531 }
532 
ipu_dump_registers(void)533 void ipu_dump_registers(void)
534 {
535 	debug("IPU_CONF = \t0x%08X\n", __raw_readl(IPU_CONF));
536 	debug("IDMAC_CONF = \t0x%08X\n", __raw_readl(IDMAC_CONF));
537 	debug("IDMAC_CHA_EN1 = \t0x%08X\n",
538 	       __raw_readl(IDMAC_CHA_EN(0)));
539 	debug("IDMAC_CHA_EN2 = \t0x%08X\n",
540 	       __raw_readl(IDMAC_CHA_EN(32)));
541 	debug("IDMAC_CHA_PRI1 = \t0x%08X\n",
542 	       __raw_readl(IDMAC_CHA_PRI(0)));
543 	debug("IDMAC_CHA_PRI2 = \t0x%08X\n",
544 	       __raw_readl(IDMAC_CHA_PRI(32)));
545 	debug("IPU_CHA_DB_MODE_SEL0 = \t0x%08X\n",
546 	       __raw_readl(IPU_CHA_DB_MODE_SEL(0)));
547 	debug("IPU_CHA_DB_MODE_SEL1 = \t0x%08X\n",
548 	       __raw_readl(IPU_CHA_DB_MODE_SEL(32)));
549 	debug("DMFC_WR_CHAN = \t0x%08X\n",
550 	       __raw_readl(DMFC_WR_CHAN));
551 	debug("DMFC_WR_CHAN_DEF = \t0x%08X\n",
552 	       __raw_readl(DMFC_WR_CHAN_DEF));
553 	debug("DMFC_DP_CHAN = \t0x%08X\n",
554 	       __raw_readl(DMFC_DP_CHAN));
555 	debug("DMFC_DP_CHAN_DEF = \t0x%08X\n",
556 	       __raw_readl(DMFC_DP_CHAN_DEF));
557 	debug("DMFC_IC_CTRL = \t0x%08X\n",
558 	       __raw_readl(DMFC_IC_CTRL));
559 	debug("IPU_FS_PROC_FLOW1 = \t0x%08X\n",
560 	       __raw_readl(IPU_FS_PROC_FLOW1));
561 	debug("IPU_FS_PROC_FLOW2 = \t0x%08X\n",
562 	       __raw_readl(IPU_FS_PROC_FLOW2));
563 	debug("IPU_FS_PROC_FLOW3 = \t0x%08X\n",
564 	       __raw_readl(IPU_FS_PROC_FLOW3));
565 	debug("IPU_FS_DISP_FLOW1 = \t0x%08X\n",
566 	       __raw_readl(IPU_FS_DISP_FLOW1));
567 }
568 
569 /*
570  * This function is called to initialize a logical IPU channel.
571  *
572  * @param       channel Input parameter for the logical channel ID to init.
573  *
574  * @param       params  Input parameter containing union of channel
575  *                      initialization parameters.
576  *
577  * @return      Returns 0 on success or negative error code on fail
578  */
ipu_init_channel(ipu_channel_t channel,ipu_channel_params_t * params)579 int32_t ipu_init_channel(ipu_channel_t channel, ipu_channel_params_t *params)
580 {
581 	int ret = 0;
582 	uint32_t ipu_conf;
583 
584 	debug("init channel = %d\n", IPU_CHAN_ID(channel));
585 
586 	if (g_ipu_clk_enabled == 0) {
587 		g_ipu_clk_enabled = 1;
588 		clk_enable(g_ipu_clk);
589 	}
590 
591 
592 	if (g_channel_init_mask & (1L << IPU_CHAN_ID(channel))) {
593 		printf("Warning: channel already initialized %d\n",
594 			IPU_CHAN_ID(channel));
595 	}
596 
597 	ipu_conf = __raw_readl(IPU_CONF);
598 
599 	switch (channel) {
600 	case MEM_DC_SYNC:
601 		if (params->mem_dc_sync.di > 1) {
602 			ret = -EINVAL;
603 			goto err;
604 		}
605 
606 		g_dc_di_assignment[1] = params->mem_dc_sync.di;
607 		ipu_dc_init(1, params->mem_dc_sync.di,
608 			     params->mem_dc_sync.interlaced);
609 		ipu_di_use_count[params->mem_dc_sync.di]++;
610 		ipu_dc_use_count++;
611 		ipu_dmfc_use_count++;
612 		break;
613 	case MEM_BG_SYNC:
614 		if (params->mem_dp_bg_sync.di > 1) {
615 			ret = -EINVAL;
616 			goto err;
617 		}
618 
619 		g_dc_di_assignment[5] = params->mem_dp_bg_sync.di;
620 		ipu_dp_init(channel, params->mem_dp_bg_sync.in_pixel_fmt,
621 			     params->mem_dp_bg_sync.out_pixel_fmt);
622 		ipu_dc_init(5, params->mem_dp_bg_sync.di,
623 			     params->mem_dp_bg_sync.interlaced);
624 		ipu_di_use_count[params->mem_dp_bg_sync.di]++;
625 		ipu_dc_use_count++;
626 		ipu_dp_use_count++;
627 		ipu_dmfc_use_count++;
628 		break;
629 	case MEM_FG_SYNC:
630 		ipu_dp_init(channel, params->mem_dp_fg_sync.in_pixel_fmt,
631 			     params->mem_dp_fg_sync.out_pixel_fmt);
632 
633 		ipu_dc_use_count++;
634 		ipu_dp_use_count++;
635 		ipu_dmfc_use_count++;
636 		break;
637 	default:
638 		printf("Missing channel initialization\n");
639 		break;
640 	}
641 
642 	/* Enable IPU sub module */
643 	g_channel_init_mask |= 1L << IPU_CHAN_ID(channel);
644 	if (ipu_dc_use_count == 1)
645 		ipu_conf |= IPU_CONF_DC_EN;
646 	if (ipu_dp_use_count == 1)
647 		ipu_conf |= IPU_CONF_DP_EN;
648 	if (ipu_dmfc_use_count == 1)
649 		ipu_conf |= IPU_CONF_DMFC_EN;
650 	if (ipu_di_use_count[0] == 1) {
651 		ipu_conf |= IPU_CONF_DI0_EN;
652 	}
653 	if (ipu_di_use_count[1] == 1) {
654 		ipu_conf |= IPU_CONF_DI1_EN;
655 	}
656 
657 	__raw_writel(ipu_conf, IPU_CONF);
658 
659 err:
660 	return ret;
661 }
662 
663 /*
664  * This function is called to uninitialize a logical IPU channel.
665  *
666  * @param       channel Input parameter for the logical channel ID to uninit.
667  */
ipu_uninit_channel(ipu_channel_t channel)668 void ipu_uninit_channel(ipu_channel_t channel)
669 {
670 	uint32_t reg;
671 	uint32_t in_dma, out_dma = 0;
672 	uint32_t ipu_conf;
673 
674 	if ((g_channel_init_mask & (1L << IPU_CHAN_ID(channel))) == 0) {
675 		debug("Channel already uninitialized %d\n",
676 			IPU_CHAN_ID(channel));
677 		return;
678 	}
679 
680 	/*
681 	 * Make sure channel is disabled
682 	 * Get input and output dma channels
683 	 */
684 	in_dma = channel_2_dma(channel, IPU_OUTPUT_BUFFER);
685 	out_dma = channel_2_dma(channel, IPU_VIDEO_IN_BUFFER);
686 
687 	if (idma_is_set(IDMAC_CHA_EN, in_dma) ||
688 	    idma_is_set(IDMAC_CHA_EN, out_dma)) {
689 		printf(
690 			"Channel %d is not disabled, disable first\n",
691 			IPU_CHAN_ID(channel));
692 		return;
693 	}
694 
695 	ipu_conf = __raw_readl(IPU_CONF);
696 
697 	/* Reset the double buffer */
698 	reg = __raw_readl(IPU_CHA_DB_MODE_SEL(in_dma));
699 	__raw_writel(reg & ~idma_mask(in_dma), IPU_CHA_DB_MODE_SEL(in_dma));
700 	reg = __raw_readl(IPU_CHA_DB_MODE_SEL(out_dma));
701 	__raw_writel(reg & ~idma_mask(out_dma), IPU_CHA_DB_MODE_SEL(out_dma));
702 
703 	switch (channel) {
704 	case MEM_DC_SYNC:
705 		ipu_dc_uninit(1);
706 		ipu_di_use_count[g_dc_di_assignment[1]]--;
707 		ipu_dc_use_count--;
708 		ipu_dmfc_use_count--;
709 		break;
710 	case MEM_BG_SYNC:
711 		ipu_dp_uninit(channel);
712 		ipu_dc_uninit(5);
713 		ipu_di_use_count[g_dc_di_assignment[5]]--;
714 		ipu_dc_use_count--;
715 		ipu_dp_use_count--;
716 		ipu_dmfc_use_count--;
717 		break;
718 	case MEM_FG_SYNC:
719 		ipu_dp_uninit(channel);
720 		ipu_dc_use_count--;
721 		ipu_dp_use_count--;
722 		ipu_dmfc_use_count--;
723 		break;
724 	default:
725 		break;
726 	}
727 
728 	g_channel_init_mask &= ~(1L << IPU_CHAN_ID(channel));
729 
730 	if (ipu_dc_use_count == 0)
731 		ipu_conf &= ~IPU_CONF_DC_EN;
732 	if (ipu_dp_use_count == 0)
733 		ipu_conf &= ~IPU_CONF_DP_EN;
734 	if (ipu_dmfc_use_count == 0)
735 		ipu_conf &= ~IPU_CONF_DMFC_EN;
736 	if (ipu_di_use_count[0] == 0) {
737 		ipu_conf &= ~IPU_CONF_DI0_EN;
738 	}
739 	if (ipu_di_use_count[1] == 0) {
740 		ipu_conf &= ~IPU_CONF_DI1_EN;
741 	}
742 
743 	__raw_writel(ipu_conf, IPU_CONF);
744 
745 	if (ipu_conf == 0) {
746 		clk_disable(g_ipu_clk);
747 		g_ipu_clk_enabled = 0;
748 	}
749 
750 }
751 
ipu_ch_param_dump(int ch)752 static inline void ipu_ch_param_dump(int ch)
753 {
754 #ifdef DEBUG
755 	struct ipu_ch_param *p = ipu_ch_param_addr(ch);
756 	debug("ch %d word 0 - %08X %08X %08X %08X %08X\n", ch,
757 		 p->word[0].data[0], p->word[0].data[1], p->word[0].data[2],
758 		 p->word[0].data[3], p->word[0].data[4]);
759 	debug("ch %d word 1 - %08X %08X %08X %08X %08X\n", ch,
760 		 p->word[1].data[0], p->word[1].data[1], p->word[1].data[2],
761 		 p->word[1].data[3], p->word[1].data[4]);
762 	debug("PFS 0x%x, ",
763 		 ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 85, 4));
764 	debug("BPP 0x%x, ",
765 		 ipu_ch_param_read_field(ipu_ch_param_addr(ch), 0, 107, 3));
766 	debug("NPB 0x%x\n",
767 		 ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 78, 7));
768 
769 	debug("FW %d, ",
770 		 ipu_ch_param_read_field(ipu_ch_param_addr(ch), 0, 125, 13));
771 	debug("FH %d, ",
772 		 ipu_ch_param_read_field(ipu_ch_param_addr(ch), 0, 138, 12));
773 	debug("Stride %d\n",
774 		 ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 102, 14));
775 
776 	debug("Width0 %d+1, ",
777 		 ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 116, 3));
778 	debug("Width1 %d+1, ",
779 		 ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 119, 3));
780 	debug("Width2 %d+1, ",
781 		 ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 122, 3));
782 	debug("Width3 %d+1, ",
783 		 ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 125, 3));
784 	debug("Offset0 %d, ",
785 		 ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 128, 5));
786 	debug("Offset1 %d, ",
787 		 ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 133, 5));
788 	debug("Offset2 %d, ",
789 		 ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 138, 5));
790 	debug("Offset3 %d\n",
791 		 ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 143, 5));
792 #endif
793 }
794 
ipu_ch_params_set_packing(struct ipu_ch_param * p,int red_width,int red_offset,int green_width,int green_offset,int blue_width,int blue_offset,int alpha_width,int alpha_offset)795 static inline void ipu_ch_params_set_packing(struct ipu_ch_param *p,
796 					      int red_width, int red_offset,
797 					      int green_width, int green_offset,
798 					      int blue_width, int blue_offset,
799 					      int alpha_width, int alpha_offset)
800 {
801 	/* Setup red width and offset */
802 	ipu_ch_param_set_field(p, 1, 116, 3, red_width - 1);
803 	ipu_ch_param_set_field(p, 1, 128, 5, red_offset);
804 	/* Setup green width and offset */
805 	ipu_ch_param_set_field(p, 1, 119, 3, green_width - 1);
806 	ipu_ch_param_set_field(p, 1, 133, 5, green_offset);
807 	/* Setup blue width and offset */
808 	ipu_ch_param_set_field(p, 1, 122, 3, blue_width - 1);
809 	ipu_ch_param_set_field(p, 1, 138, 5, blue_offset);
810 	/* Setup alpha width and offset */
811 	ipu_ch_param_set_field(p, 1, 125, 3, alpha_width - 1);
812 	ipu_ch_param_set_field(p, 1, 143, 5, alpha_offset);
813 }
814 
ipu_ch_param_init(int ch,uint32_t pixel_fmt,uint32_t width,uint32_t height,uint32_t stride,uint32_t u,uint32_t v,uint32_t uv_stride,dma_addr_t addr0,dma_addr_t addr1)815 static void ipu_ch_param_init(int ch,
816 			      uint32_t pixel_fmt, uint32_t width,
817 			      uint32_t height, uint32_t stride,
818 			      uint32_t u, uint32_t v,
819 			      uint32_t uv_stride, dma_addr_t addr0,
820 			      dma_addr_t addr1)
821 {
822 	uint32_t u_offset = 0;
823 	uint32_t v_offset = 0;
824 	struct ipu_ch_param params;
825 
826 	memset(&params, 0, sizeof(params));
827 
828 	ipu_ch_param_set_field(&params, 0, 125, 13, width - 1);
829 
830 	if ((ch == 8) || (ch == 9) || (ch == 10)) {
831 		ipu_ch_param_set_field(&params, 0, 138, 12, (height / 2) - 1);
832 		ipu_ch_param_set_field(&params, 1, 102, 14, (stride * 2) - 1);
833 	} else {
834 		ipu_ch_param_set_field(&params, 0, 138, 12, height - 1);
835 		ipu_ch_param_set_field(&params, 1, 102, 14, stride - 1);
836 	}
837 
838 	ipu_ch_param_set_field(&params, 1, 0, 29, addr0 >> 3);
839 	ipu_ch_param_set_field(&params, 1, 29, 29, addr1 >> 3);
840 
841 	switch (pixel_fmt) {
842 	case IPU_PIX_FMT_GENERIC:
843 		/*Represents 8-bit Generic data */
844 		ipu_ch_param_set_field(&params, 0, 107, 3, 5);	/* bits/pixel */
845 		ipu_ch_param_set_field(&params, 1, 85, 4, 6);	/* pix format */
846 		ipu_ch_param_set_field(&params, 1, 78, 7, 63);	/* burst size */
847 
848 		break;
849 	case IPU_PIX_FMT_GENERIC_32:
850 		/*Represents 32-bit Generic data */
851 		break;
852 	case IPU_PIX_FMT_RGB565:
853 		ipu_ch_param_set_field(&params, 0, 107, 3, 3);	/* bits/pixel */
854 		ipu_ch_param_set_field(&params, 1, 85, 4, 7);	/* pix format */
855 		ipu_ch_param_set_field(&params, 1, 78, 7, 15);	/* burst size */
856 
857 		ipu_ch_params_set_packing(&params, 5, 0, 6, 5, 5, 11, 8, 16);
858 		break;
859 	case IPU_PIX_FMT_BGR24:
860 		ipu_ch_param_set_field(&params, 0, 107, 3, 1);	/* bits/pixel */
861 		ipu_ch_param_set_field(&params, 1, 85, 4, 7);	/* pix format */
862 		ipu_ch_param_set_field(&params, 1, 78, 7, 19);	/* burst size */
863 
864 		ipu_ch_params_set_packing(&params, 8, 0, 8, 8, 8, 16, 8, 24);
865 		break;
866 	case IPU_PIX_FMT_RGB24:
867 	case IPU_PIX_FMT_YUV444:
868 		ipu_ch_param_set_field(&params, 0, 107, 3, 1);	/* bits/pixel */
869 		ipu_ch_param_set_field(&params, 1, 85, 4, 7);	/* pix format */
870 		ipu_ch_param_set_field(&params, 1, 78, 7, 19);	/* burst size */
871 
872 		ipu_ch_params_set_packing(&params, 8, 16, 8, 8, 8, 0, 8, 24);
873 		break;
874 	case IPU_PIX_FMT_BGRA32:
875 	case IPU_PIX_FMT_BGR32:
876 		ipu_ch_param_set_field(&params, 0, 107, 3, 0);	/* bits/pixel */
877 		ipu_ch_param_set_field(&params, 1, 85, 4, 7);	/* pix format */
878 		ipu_ch_param_set_field(&params, 1, 78, 7, 15);	/* burst size */
879 
880 		ipu_ch_params_set_packing(&params, 8, 8, 8, 16, 8, 24, 8, 0);
881 		break;
882 	case IPU_PIX_FMT_RGBA32:
883 	case IPU_PIX_FMT_RGB32:
884 		ipu_ch_param_set_field(&params, 0, 107, 3, 0);	/* bits/pixel */
885 		ipu_ch_param_set_field(&params, 1, 85, 4, 7);	/* pix format */
886 		ipu_ch_param_set_field(&params, 1, 78, 7, 15);	/* burst size */
887 
888 		ipu_ch_params_set_packing(&params, 8, 24, 8, 16, 8, 8, 8, 0);
889 		break;
890 	case IPU_PIX_FMT_ABGR32:
891 		ipu_ch_param_set_field(&params, 0, 107, 3, 0);	/* bits/pixel */
892 		ipu_ch_param_set_field(&params, 1, 85, 4, 7);	/* pix format */
893 
894 		ipu_ch_params_set_packing(&params, 8, 0, 8, 8, 8, 16, 8, 24);
895 		break;
896 	case IPU_PIX_FMT_UYVY:
897 		ipu_ch_param_set_field(&params, 0, 107, 3, 3);	/* bits/pixel */
898 		ipu_ch_param_set_field(&params, 1, 85, 4, 0xA);	/* pix format */
899 		ipu_ch_param_set_field(&params, 1, 78, 7, 15);	/* burst size */
900 		break;
901 	case IPU_PIX_FMT_YUYV:
902 		ipu_ch_param_set_field(&params, 0, 107, 3, 3);	/* bits/pixel */
903 		ipu_ch_param_set_field(&params, 1, 85, 4, 0x8);	/* pix format */
904 		ipu_ch_param_set_field(&params, 1, 78, 7, 31);	/* burst size */
905 		break;
906 	case IPU_PIX_FMT_YUV420P2:
907 	case IPU_PIX_FMT_YUV420P:
908 		ipu_ch_param_set_field(&params, 1, 85, 4, 2);	/* pix format */
909 
910 		if (uv_stride < stride / 2)
911 			uv_stride = stride / 2;
912 
913 		u_offset = stride * height;
914 		v_offset = u_offset + (uv_stride * height / 2);
915 		/* burst size */
916 		if ((ch == 8) || (ch == 9) || (ch == 10)) {
917 			ipu_ch_param_set_field(&params, 1, 78, 7, 15);
918 			uv_stride = uv_stride*2;
919 		} else {
920 			ipu_ch_param_set_field(&params, 1, 78, 7, 31);
921 		}
922 		break;
923 	case IPU_PIX_FMT_YVU422P:
924 		/* BPP & pixel format */
925 		ipu_ch_param_set_field(&params, 1, 85, 4, 1);	/* pix format */
926 		ipu_ch_param_set_field(&params, 1, 78, 7, 31);	/* burst size */
927 
928 		if (uv_stride < stride / 2)
929 			uv_stride = stride / 2;
930 
931 		v_offset = (v == 0) ? stride * height : v;
932 		u_offset = (u == 0) ? v_offset + v_offset / 2 : u;
933 		break;
934 	case IPU_PIX_FMT_YUV422P:
935 		/* BPP & pixel format */
936 		ipu_ch_param_set_field(&params, 1, 85, 4, 1);	/* pix format */
937 		ipu_ch_param_set_field(&params, 1, 78, 7, 31);	/* burst size */
938 
939 		if (uv_stride < stride / 2)
940 			uv_stride = stride / 2;
941 
942 		u_offset = (u == 0) ? stride * height : u;
943 		v_offset = (v == 0) ? u_offset + u_offset / 2 : v;
944 		break;
945 	case IPU_PIX_FMT_NV12:
946 		/* BPP & pixel format */
947 		ipu_ch_param_set_field(&params, 1, 85, 4, 4);	/* pix format */
948 		ipu_ch_param_set_field(&params, 1, 78, 7, 31);	/* burst size */
949 		uv_stride = stride;
950 		u_offset = (u == 0) ? stride * height : u;
951 		break;
952 	default:
953 		puts("mxc ipu: unimplemented pixel format\n");
954 		break;
955 	}
956 
957 
958 	if (uv_stride)
959 		ipu_ch_param_set_field(&params, 1, 128, 14, uv_stride - 1);
960 
961 	/* Get the uv offset from user when need cropping */
962 	if (u || v) {
963 		u_offset = u;
964 		v_offset = v;
965 	}
966 
967 	/* UBO and VBO are 22-bit */
968 	if (u_offset/8 > 0x3fffff)
969 		puts("The value of U offset exceeds IPU limitation\n");
970 	if (v_offset/8 > 0x3fffff)
971 		puts("The value of V offset exceeds IPU limitation\n");
972 
973 	ipu_ch_param_set_field(&params, 0, 46, 22, u_offset / 8);
974 	ipu_ch_param_set_field(&params, 0, 68, 22, v_offset / 8);
975 
976 	debug("initializing idma ch %d @ %p\n", ch, ipu_ch_param_addr(ch));
977 	memcpy(ipu_ch_param_addr(ch), &params, sizeof(params));
978 };
979 
980 /*
981  * This function is called to initialize a buffer for logical IPU channel.
982  *
983  * @param       channel         Input parameter for the logical channel ID.
984  *
985  * @param       type            Input parameter which buffer to initialize.
986  *
987  * @param       pixel_fmt       Input parameter for pixel format of buffer.
988  *                              Pixel format is a FOURCC ASCII code.
989  *
990  * @param       width           Input parameter for width of buffer in pixels.
991  *
992  * @param       height          Input parameter for height of buffer in pixels.
993  *
994  * @param       stride          Input parameter for stride length of buffer
995  *                              in pixels.
996  *
997  * @param       phyaddr_0       Input parameter buffer 0 physical address.
998  *
999  * @param       phyaddr_1       Input parameter buffer 1 physical address.
1000  *                              Setting this to a value other than NULL enables
1001  *                              double buffering mode.
1002  *
1003  * @param       u		private u offset for additional cropping,
1004  *				zero if not used.
1005  *
1006  * @param       v		private v offset for additional cropping,
1007  *				zero if not used.
1008  *
1009  * @return      Returns 0 on success or negative error code on fail
1010  */
ipu_init_channel_buffer(ipu_channel_t channel,ipu_buffer_t type,uint32_t pixel_fmt,uint16_t width,uint16_t height,uint32_t stride,dma_addr_t phyaddr_0,dma_addr_t phyaddr_1,uint32_t u,uint32_t v)1011 int32_t ipu_init_channel_buffer(ipu_channel_t channel, ipu_buffer_t type,
1012 				uint32_t pixel_fmt,
1013 				uint16_t width, uint16_t height,
1014 				uint32_t stride,
1015 				dma_addr_t phyaddr_0, dma_addr_t phyaddr_1,
1016 				uint32_t u, uint32_t v)
1017 {
1018 	uint32_t reg;
1019 	uint32_t dma_chan;
1020 
1021 	dma_chan = channel_2_dma(channel, type);
1022 	if (!idma_is_valid(dma_chan))
1023 		return -EINVAL;
1024 
1025 	if (stride < width * bytes_per_pixel(pixel_fmt))
1026 		stride = width * bytes_per_pixel(pixel_fmt);
1027 
1028 	if (stride % 4) {
1029 		printf(
1030 			"Stride not 32-bit aligned, stride = %d\n", stride);
1031 		return -EINVAL;
1032 	}
1033 	/* Build parameter memory data for DMA channel */
1034 	ipu_ch_param_init(dma_chan, pixel_fmt, width, height, stride, u, v, 0,
1035 			   phyaddr_0, phyaddr_1);
1036 
1037 	if (ipu_is_dmfc_chan(dma_chan)) {
1038 		ipu_dmfc_set_wait4eot(dma_chan, width);
1039 	}
1040 
1041 	if (idma_is_set(IDMAC_CHA_PRI, dma_chan))
1042 		ipu_ch_param_set_high_priority(dma_chan);
1043 
1044 	ipu_ch_param_dump(dma_chan);
1045 
1046 	reg = __raw_readl(IPU_CHA_DB_MODE_SEL(dma_chan));
1047 	if (phyaddr_1)
1048 		reg |= idma_mask(dma_chan);
1049 	else
1050 		reg &= ~idma_mask(dma_chan);
1051 	__raw_writel(reg, IPU_CHA_DB_MODE_SEL(dma_chan));
1052 
1053 	/* Reset to buffer 0 */
1054 	__raw_writel(idma_mask(dma_chan), IPU_CHA_CUR_BUF(dma_chan));
1055 
1056 	return 0;
1057 }
1058 
1059 /*
1060  * This function enables a logical channel.
1061  *
1062  * @param       channel         Input parameter for the logical channel ID.
1063  *
1064  * @return      This function returns 0 on success or negative error code on
1065  *              fail.
1066  */
ipu_enable_channel(ipu_channel_t channel)1067 int32_t ipu_enable_channel(ipu_channel_t channel)
1068 {
1069 	uint32_t reg;
1070 	uint32_t in_dma;
1071 	uint32_t out_dma;
1072 
1073 	if (g_channel_enable_mask & (1L << IPU_CHAN_ID(channel))) {
1074 		printf("Warning: channel already enabled %d\n",
1075 			IPU_CHAN_ID(channel));
1076 	}
1077 
1078 	/* Get input and output dma channels */
1079 	out_dma = channel_2_dma(channel, IPU_OUTPUT_BUFFER);
1080 	in_dma = channel_2_dma(channel, IPU_VIDEO_IN_BUFFER);
1081 
1082 	if (idma_is_valid(in_dma)) {
1083 		reg = __raw_readl(IDMAC_CHA_EN(in_dma));
1084 		__raw_writel(reg | idma_mask(in_dma), IDMAC_CHA_EN(in_dma));
1085 	}
1086 	if (idma_is_valid(out_dma)) {
1087 		reg = __raw_readl(IDMAC_CHA_EN(out_dma));
1088 		__raw_writel(reg | idma_mask(out_dma), IDMAC_CHA_EN(out_dma));
1089 	}
1090 
1091 	if ((channel == MEM_DC_SYNC) || (channel == MEM_BG_SYNC) ||
1092 	    (channel == MEM_FG_SYNC))
1093 		ipu_dp_dc_enable(channel);
1094 
1095 	g_channel_enable_mask |= 1L << IPU_CHAN_ID(channel);
1096 
1097 	return 0;
1098 }
1099 
1100 /*
1101  * This function clear buffer ready for a logical channel.
1102  *
1103  * @param       channel         Input parameter for the logical channel ID.
1104  *
1105  * @param       type            Input parameter which buffer to clear.
1106  *
1107  * @param       bufNum          Input parameter for which buffer number clear
1108  *				ready state.
1109  *
1110  */
ipu_clear_buffer_ready(ipu_channel_t channel,ipu_buffer_t type,uint32_t bufNum)1111 void ipu_clear_buffer_ready(ipu_channel_t channel, ipu_buffer_t type,
1112 		uint32_t bufNum)
1113 {
1114 	uint32_t dma_ch = channel_2_dma(channel, type);
1115 
1116 	if (!idma_is_valid(dma_ch))
1117 		return;
1118 
1119 	__raw_writel(0xF0000000, IPU_GPR); /* write one to clear */
1120 	if (bufNum == 0) {
1121 		if (idma_is_set(IPU_CHA_BUF0_RDY, dma_ch)) {
1122 			__raw_writel(idma_mask(dma_ch),
1123 					IPU_CHA_BUF0_RDY(dma_ch));
1124 		}
1125 	} else {
1126 		if (idma_is_set(IPU_CHA_BUF1_RDY, dma_ch)) {
1127 			__raw_writel(idma_mask(dma_ch),
1128 					IPU_CHA_BUF1_RDY(dma_ch));
1129 		}
1130 	}
1131 	__raw_writel(0x0, IPU_GPR); /* write one to set */
1132 }
1133 
1134 /*
1135  * This function disables a logical channel.
1136  *
1137  * @param       channel         Input parameter for the logical channel ID.
1138  *
1139  * @param       wait_for_stop   Flag to set whether to wait for channel end
1140  *                              of frame or return immediately.
1141  *
1142  * @return      This function returns 0 on success or negative error code on
1143  *              fail.
1144  */
ipu_disable_channel(ipu_channel_t channel)1145 int32_t ipu_disable_channel(ipu_channel_t channel)
1146 {
1147 	uint32_t reg;
1148 	uint32_t in_dma;
1149 	uint32_t out_dma;
1150 
1151 	if ((g_channel_enable_mask & (1L << IPU_CHAN_ID(channel))) == 0) {
1152 		debug("Channel already disabled %d\n",
1153 			IPU_CHAN_ID(channel));
1154 		return 0;
1155 	}
1156 
1157 	/* Get input and output dma channels */
1158 	out_dma = channel_2_dma(channel, IPU_OUTPUT_BUFFER);
1159 	in_dma = channel_2_dma(channel, IPU_VIDEO_IN_BUFFER);
1160 
1161 	if ((idma_is_valid(in_dma) &&
1162 		!idma_is_set(IDMAC_CHA_EN, in_dma))
1163 		&& (idma_is_valid(out_dma) &&
1164 		!idma_is_set(IDMAC_CHA_EN, out_dma)))
1165 		return -EINVAL;
1166 
1167 	if ((channel == MEM_BG_SYNC) || (channel == MEM_FG_SYNC) ||
1168 	    (channel == MEM_DC_SYNC)) {
1169 		ipu_dp_dc_disable(channel, 0);
1170 	}
1171 
1172 	/* Disable DMA channel(s) */
1173 	if (idma_is_valid(in_dma)) {
1174 		reg = __raw_readl(IDMAC_CHA_EN(in_dma));
1175 		__raw_writel(reg & ~idma_mask(in_dma), IDMAC_CHA_EN(in_dma));
1176 		__raw_writel(idma_mask(in_dma), IPU_CHA_CUR_BUF(in_dma));
1177 	}
1178 	if (idma_is_valid(out_dma)) {
1179 		reg = __raw_readl(IDMAC_CHA_EN(out_dma));
1180 		__raw_writel(reg & ~idma_mask(out_dma), IDMAC_CHA_EN(out_dma));
1181 		__raw_writel(idma_mask(out_dma), IPU_CHA_CUR_BUF(out_dma));
1182 	}
1183 
1184 	g_channel_enable_mask &= ~(1L << IPU_CHAN_ID(channel));
1185 
1186 	/* Set channel buffers NOT to be ready */
1187 	if (idma_is_valid(in_dma)) {
1188 		ipu_clear_buffer_ready(channel, IPU_VIDEO_IN_BUFFER, 0);
1189 		ipu_clear_buffer_ready(channel, IPU_VIDEO_IN_BUFFER, 1);
1190 	}
1191 	if (idma_is_valid(out_dma)) {
1192 		ipu_clear_buffer_ready(channel, IPU_OUTPUT_BUFFER, 0);
1193 		ipu_clear_buffer_ready(channel, IPU_OUTPUT_BUFFER, 1);
1194 	}
1195 
1196 	return 0;
1197 }
1198 
bytes_per_pixel(uint32_t fmt)1199 uint32_t bytes_per_pixel(uint32_t fmt)
1200 {
1201 	switch (fmt) {
1202 	case IPU_PIX_FMT_GENERIC:	/*generic data */
1203 	case IPU_PIX_FMT_RGB332:
1204 	case IPU_PIX_FMT_YUV420P:
1205 	case IPU_PIX_FMT_YUV422P:
1206 		return 1;
1207 		break;
1208 	case IPU_PIX_FMT_RGB565:
1209 	case IPU_PIX_FMT_YUYV:
1210 	case IPU_PIX_FMT_UYVY:
1211 		return 2;
1212 		break;
1213 	case IPU_PIX_FMT_BGR24:
1214 	case IPU_PIX_FMT_RGB24:
1215 		return 3;
1216 		break;
1217 	case IPU_PIX_FMT_GENERIC_32:	/*generic data */
1218 	case IPU_PIX_FMT_BGR32:
1219 	case IPU_PIX_FMT_BGRA32:
1220 	case IPU_PIX_FMT_RGB32:
1221 	case IPU_PIX_FMT_RGBA32:
1222 	case IPU_PIX_FMT_ABGR32:
1223 		return 4;
1224 		break;
1225 	default:
1226 		return 1;
1227 		break;
1228 	}
1229 	return 0;
1230 }
1231 
format_to_colorspace(uint32_t fmt)1232 ipu_color_space_t format_to_colorspace(uint32_t fmt)
1233 {
1234 	switch (fmt) {
1235 	case IPU_PIX_FMT_RGB666:
1236 	case IPU_PIX_FMT_RGB565:
1237 	case IPU_PIX_FMT_BGR24:
1238 	case IPU_PIX_FMT_RGB24:
1239 	case IPU_PIX_FMT_BGR32:
1240 	case IPU_PIX_FMT_BGRA32:
1241 	case IPU_PIX_FMT_RGB32:
1242 	case IPU_PIX_FMT_RGBA32:
1243 	case IPU_PIX_FMT_ABGR32:
1244 	case IPU_PIX_FMT_LVDS666:
1245 	case IPU_PIX_FMT_LVDS888:
1246 		return RGB;
1247 		break;
1248 
1249 	default:
1250 		return YCbCr;
1251 		break;
1252 	}
1253 	return RGB;
1254 }
1255 
1256 /* should be removed when clk framework is availiable */
ipu_set_ldb_clock(int rate)1257 int ipu_set_ldb_clock(int rate)
1258 {
1259 	ldb_clk.rate = rate;
1260 
1261 	return 0;
1262 }
1263 
ipu_clk_enabled(void)1264 bool ipu_clk_enabled(void)
1265 {
1266 	return g_ipu_clk_enabled;
1267 }
1268