1 /*
2 * Copyright 2020 Advanced Micro Devices, Inc.
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
10 *
11 * The above copyright notice and this permission notice shall be included in
12 * all copies or substantial portions of the Software.
13 *
14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
15 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
16 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
17 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
18 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
19 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
20 * OTHER DEALINGS IN THE SOFTWARE.
21 *
22 * Authors: AMD
23 *
24 */
25
26 #include "reg_helper.h"
27
28 #include "core_types.h"
29 #include "link_encoder.h"
30 #include "dcn30_dio_link_encoder.h"
31 #include "stream_encoder.h"
32 #include "i2caux_interface.h"
33 #include "dc_bios_types.h"
34 /* #include "dcn3ag/dcn3ag_phy_fw.h" */
35
36 #include "gpio_service_interface.h"
37
38 #define CTX \
39 enc10->base.ctx
40 #define DC_LOGGER \
41 enc10->base.ctx->logger
42
43 #define REG(reg)\
44 (enc10->link_regs->reg)
45
46 #undef FN
47 #define FN(reg_name, field_name) \
48 enc10->link_shift->field_name, enc10->link_mask->field_name
49
50 #define IND_REG(index) \
51 (enc10->link_regs->index)
52
53
dcn30_link_encoder_validate_output_with_stream(struct link_encoder * enc,const struct dc_stream_state * stream)54 bool dcn30_link_encoder_validate_output_with_stream(
55 struct link_encoder *enc,
56 const struct dc_stream_state *stream)
57 {
58 return dcn10_link_encoder_validate_output_with_stream(enc, stream);
59 }
60
61 static const struct link_encoder_funcs dcn30_link_enc_funcs = {
62 .read_state = link_enc2_read_state,
63 .validate_output_with_stream =
64 dcn30_link_encoder_validate_output_with_stream,
65 .hw_init = enc3_hw_init,
66 .setup = dcn10_link_encoder_setup,
67 .enable_tmds_output = dcn10_link_encoder_enable_tmds_output,
68 .enable_dp_output = dcn20_link_encoder_enable_dp_output,
69 .enable_dp_mst_output = dcn10_link_encoder_enable_dp_mst_output,
70 .disable_output = dcn10_link_encoder_disable_output,
71 .dp_set_lane_settings = dcn10_link_encoder_dp_set_lane_settings,
72 .dp_set_phy_pattern = dcn10_link_encoder_dp_set_phy_pattern,
73 .update_mst_stream_allocation_table =
74 dcn10_link_encoder_update_mst_stream_allocation_table,
75 .psr_program_dp_dphy_fast_training =
76 dcn10_psr_program_dp_dphy_fast_training,
77 .psr_program_secondary_packet = dcn10_psr_program_secondary_packet,
78 .connect_dig_be_to_fe = dcn10_link_encoder_connect_dig_be_to_fe,
79 .enable_hpd = dcn10_link_encoder_enable_hpd,
80 .disable_hpd = dcn10_link_encoder_disable_hpd,
81 .is_dig_enabled = dcn10_is_dig_enabled,
82 .destroy = dcn10_link_encoder_destroy,
83 .fec_set_enable = enc2_fec_set_enable,
84 .fec_set_ready = enc2_fec_set_ready,
85 .fec_is_active = enc2_fec_is_active,
86 .get_dig_frontend = dcn10_get_dig_frontend,
87 .get_dig_mode = dcn10_get_dig_mode,
88 .is_in_alt_mode = dcn20_link_encoder_is_in_alt_mode,
89 .get_max_link_cap = dcn20_link_encoder_get_max_link_cap,
90 };
91
dcn30_link_encoder_construct(struct dcn20_link_encoder * enc20,const struct encoder_init_data * init_data,const struct encoder_feature_support * enc_features,const struct dcn10_link_enc_registers * link_regs,const struct dcn10_link_enc_aux_registers * aux_regs,const struct dcn10_link_enc_hpd_registers * hpd_regs,const struct dcn10_link_enc_shift * link_shift,const struct dcn10_link_enc_mask * link_mask)92 void dcn30_link_encoder_construct(
93 struct dcn20_link_encoder *enc20,
94 const struct encoder_init_data *init_data,
95 const struct encoder_feature_support *enc_features,
96 const struct dcn10_link_enc_registers *link_regs,
97 const struct dcn10_link_enc_aux_registers *aux_regs,
98 const struct dcn10_link_enc_hpd_registers *hpd_regs,
99 const struct dcn10_link_enc_shift *link_shift,
100 const struct dcn10_link_enc_mask *link_mask)
101 {
102 struct bp_encoder_cap_info bp_cap_info = {0};
103 const struct dc_vbios_funcs *bp_funcs = init_data->ctx->dc_bios->funcs;
104 enum bp_result result = BP_RESULT_OK;
105 struct dcn10_link_encoder *enc10 = &enc20->enc10;
106
107 enc10->base.funcs = &dcn30_link_enc_funcs;
108 enc10->base.ctx = init_data->ctx;
109 enc10->base.id = init_data->encoder;
110
111 enc10->base.hpd_source = init_data->hpd_source;
112 enc10->base.connector = init_data->connector;
113
114 enc10->base.preferred_engine = ENGINE_ID_UNKNOWN;
115
116 enc10->base.features = *enc_features;
117
118 enc10->base.transmitter = init_data->transmitter;
119
120 /* set the flag to indicate whether driver poll the I2C data pin
121 * while doing the DP sink detect
122 */
123
124 /* if (dal_adapter_service_is_feature_supported(as,
125 FEATURE_DP_SINK_DETECT_POLL_DATA_PIN))
126 enc10->base.features.flags.bits.
127 DP_SINK_DETECT_POLL_DATA_PIN = true;*/
128
129 enc10->base.output_signals =
130 SIGNAL_TYPE_DVI_SINGLE_LINK |
131 SIGNAL_TYPE_DVI_DUAL_LINK |
132 SIGNAL_TYPE_LVDS |
133 SIGNAL_TYPE_DISPLAY_PORT |
134 SIGNAL_TYPE_DISPLAY_PORT_MST |
135 SIGNAL_TYPE_EDP |
136 SIGNAL_TYPE_HDMI_TYPE_A;
137
138 /* For DCE 8.0 and 8.1, by design, UNIPHY is hardwired to DIG_BE.
139 * SW always assign DIG_FE 1:1 mapped to DIG_FE for non-MST UNIPHY.
140 * SW assign DIG_FE to non-MST UNIPHY first and MST last. So prefer
141 * DIG is per UNIPHY and used by SST DP, eDP, HDMI, DVI and LVDS.
142 * Prefer DIG assignment is decided by board design.
143 * For DCE 8.0, there are only max 6 UNIPHYs, we assume board design
144 * and VBIOS will filter out 7 UNIPHY for DCE 8.0.
145 * By this, adding DIGG should not hurt DCE 8.0.
146 * This will let DCE 8.1 share DCE 8.0 as much as possible
147 */
148
149 enc10->link_regs = link_regs;
150 enc10->aux_regs = aux_regs;
151 enc10->hpd_regs = hpd_regs;
152 enc10->link_shift = link_shift;
153 enc10->link_mask = link_mask;
154
155 switch (enc10->base.transmitter) {
156 case TRANSMITTER_UNIPHY_A:
157 enc10->base.preferred_engine = ENGINE_ID_DIGA;
158 break;
159 case TRANSMITTER_UNIPHY_B:
160 enc10->base.preferred_engine = ENGINE_ID_DIGB;
161 break;
162 case TRANSMITTER_UNIPHY_C:
163 enc10->base.preferred_engine = ENGINE_ID_DIGC;
164 break;
165 case TRANSMITTER_UNIPHY_D:
166 enc10->base.preferred_engine = ENGINE_ID_DIGD;
167 break;
168 case TRANSMITTER_UNIPHY_E:
169 enc10->base.preferred_engine = ENGINE_ID_DIGE;
170 break;
171 case TRANSMITTER_UNIPHY_F:
172 enc10->base.preferred_engine = ENGINE_ID_DIGF;
173 break;
174 case TRANSMITTER_UNIPHY_G:
175 enc10->base.preferred_engine = ENGINE_ID_DIGG;
176 break;
177 default:
178 ASSERT_CRITICAL(false);
179 enc10->base.preferred_engine = ENGINE_ID_UNKNOWN;
180 }
181
182 /* default to one to mirror Windows behavior */
183 enc10->base.features.flags.bits.HDMI_6GB_EN = 1;
184
185 result = bp_funcs->get_encoder_cap_info(enc10->base.ctx->dc_bios,
186 enc10->base.id, &bp_cap_info);
187
188 /* Override features with DCE-specific values */
189 if (result == BP_RESULT_OK) {
190 enc10->base.features.flags.bits.IS_HBR2_CAPABLE =
191 bp_cap_info.DP_HBR2_EN;
192 enc10->base.features.flags.bits.IS_HBR3_CAPABLE =
193 bp_cap_info.DP_HBR3_EN;
194 enc10->base.features.flags.bits.HDMI_6GB_EN = bp_cap_info.HDMI_6GB_EN;
195 enc10->base.features.flags.bits.IS_DP2_CAPABLE = bp_cap_info.IS_DP2_CAPABLE;
196 enc10->base.features.flags.bits.IS_UHBR10_CAPABLE = bp_cap_info.DP_UHBR10_EN;
197 enc10->base.features.flags.bits.IS_UHBR13_5_CAPABLE = bp_cap_info.DP_UHBR13_5_EN;
198 enc10->base.features.flags.bits.IS_UHBR20_CAPABLE = bp_cap_info.DP_UHBR20_EN;
199 enc10->base.features.flags.bits.DP_IS_USB_C =
200 bp_cap_info.DP_IS_USB_C;
201 } else {
202 DC_LOG_WARNING("%s: Failed to get encoder_cap_info from VBIOS with error code %d!\n",
203 __func__,
204 result);
205 }
206 if (enc10->base.ctx->dc->debug.hdmi20_disable) {
207 enc10->base.features.flags.bits.HDMI_6GB_EN = 0;
208 }
209 }
210
211 #define AUX_REG(reg)\
212 (enc10->aux_regs->reg)
213
214 #define AUX_REG_READ(reg_name) \
215 dm_read_reg(CTX, AUX_REG(reg_name))
216
217 #define AUX_REG_WRITE(reg_name, val) \
218 dm_write_reg(CTX, AUX_REG(reg_name), val)
enc3_hw_init(struct link_encoder * enc)219 void enc3_hw_init(struct link_encoder *enc)
220 {
221 struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
222
223 /*
224 00 - DP_AUX_DPHY_RX_DETECTION_THRESHOLD__1to2 : 1/2
225 01 - DP_AUX_DPHY_RX_DETECTION_THRESHOLD__3to4 : 3/4
226 02 - DP_AUX_DPHY_RX_DETECTION_THRESHOLD__7to8 : 7/8
227 03 - DP_AUX_DPHY_RX_DETECTION_THRESHOLD__15to16 : 15/16
228 04 - DP_AUX_DPHY_RX_DETECTION_THRESHOLD__31to32 : 31/32
229 05 - DP_AUX_DPHY_RX_DETECTION_THRESHOLD__63to64 : 63/64
230 06 - DP_AUX_DPHY_RX_DETECTION_THRESHOLD__127to128 : 127/128
231 07 - DP_AUX_DPHY_RX_DETECTION_THRESHOLD__255to256 : 255/256
232 */
233
234 /*
235 AUX_REG_UPDATE_5(AUX_DPHY_RX_CONTROL0,
236 AUX_RX_START_WINDOW = 1 [6:4]
237 AUX_RX_RECEIVE_WINDOW = 1 default is 2 [10:8]
238 AUX_RX_HALF_SYM_DETECT_LEN = 1 [13:12] default is 1
239 AUX_RX_TRANSITION_FILTER_EN = 1 [16] default is 1
240 AUX_RX_ALLOW_BELOW_THRESHOLD_PHASE_DETECT [17] is 0 default is 0
241 AUX_RX_ALLOW_BELOW_THRESHOLD_START [18] is 1 default is 1
242 AUX_RX_ALLOW_BELOW_THRESHOLD_STOP [19] is 1 default is 1
243 AUX_RX_PHASE_DETECT_LEN, [21,20] = 0x3 default is 3
244 AUX_RX_DETECTION_THRESHOLD [30:28] = 1
245 */
246 AUX_REG_WRITE(AUX_DPHY_RX_CONTROL0, 0x103d1110);
247
248 AUX_REG_WRITE(AUX_DPHY_TX_CONTROL, 0x21c7a);
249
250 //AUX_DPHY_TX_REF_CONTROL'AUX_TX_REF_DIV HW default is 0x32;
251 // Set AUX_TX_REF_DIV Divider to generate 2 MHz reference from refclk
252 // 27MHz -> 0xd
253 // 100MHz -> 0x32
254 // 48MHz -> 0x18
255
256 // Set TMDS_CTL0 to 1. This is a legacy setting.
257 REG_UPDATE(TMDS_CTL_BITS, TMDS_CTL0, 1);
258
259 dcn10_aux_initialize(enc10);
260 }
261