1 /*
2 * Interrupt handling for GE FPGA based PIC
3 *
4 * Author: Martyn Welch <martyn.welch@ge.com>
5 *
6 * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc.
7 *
8 * This file is licensed under the terms of the GNU General Public License
9 * version 2. This program is licensed "as is" without any warranty of any
10 * kind, whether express or implied.
11 */
12
13 #include <linux/stddef.h>
14 #include <linux/kernel.h>
15 #include <linux/init.h>
16 #include <linux/irq.h>
17 #include <linux/interrupt.h>
18 #include <linux/spinlock.h>
19
20 #include <asm/byteorder.h>
21 #include <asm/io.h>
22 #include <asm/prom.h>
23 #include <asm/irq.h>
24
25 #include "ge_pic.h"
26
27 #define DEBUG
28 #undef DEBUG
29
30 #ifdef DEBUG
31 #define DBG(fmt...) do { printk(KERN_DEBUG "gef_pic: " fmt); } while (0)
32 #else
33 #define DBG(fmt...) do { } while (0)
34 #endif
35
36 #define GEF_PIC_NUM_IRQS 32
37
38 /* Interrupt Controller Interface Registers */
39 #define GEF_PIC_INTR_STATUS 0x0000
40
41 #define GEF_PIC_INTR_MASK(cpu) (0x0010 + (0x4 * cpu))
42 #define GEF_PIC_CPU0_INTR_MASK GEF_PIC_INTR_MASK(0)
43 #define GEF_PIC_CPU1_INTR_MASK GEF_PIC_INTR_MASK(1)
44
45 #define GEF_PIC_MCP_MASK(cpu) (0x0018 + (0x4 * cpu))
46 #define GEF_PIC_CPU0_MCP_MASK GEF_PIC_MCP_MASK(0)
47 #define GEF_PIC_CPU1_MCP_MASK GEF_PIC_MCP_MASK(1)
48
49
50 static DEFINE_RAW_SPINLOCK(gef_pic_lock);
51
52 static void __iomem *gef_pic_irq_reg_base;
53 static struct irq_domain *gef_pic_irq_host;
54 static int gef_pic_cascade_irq;
55
56 /*
57 * Interrupt Controller Handling
58 *
59 * The interrupt controller handles interrupts for most on board interrupts,
60 * apart from PCI interrupts. For example on SBC610:
61 *
62 * 17:31 RO Reserved
63 * 16 RO PCI Express Doorbell 3 Status
64 * 15 RO PCI Express Doorbell 2 Status
65 * 14 RO PCI Express Doorbell 1 Status
66 * 13 RO PCI Express Doorbell 0 Status
67 * 12 RO Real Time Clock Interrupt Status
68 * 11 RO Temperature Interrupt Status
69 * 10 RO Temperature Critical Interrupt Status
70 * 9 RO Ethernet PHY1 Interrupt Status
71 * 8 RO Ethernet PHY3 Interrupt Status
72 * 7 RO PEX8548 Interrupt Status
73 * 6 RO Reserved
74 * 5 RO Watchdog 0 Interrupt Status
75 * 4 RO Watchdog 1 Interrupt Status
76 * 3 RO AXIS Message FIFO A Interrupt Status
77 * 2 RO AXIS Message FIFO B Interrupt Status
78 * 1 RO AXIS Message FIFO C Interrupt Status
79 * 0 RO AXIS Message FIFO D Interrupt Status
80 *
81 * Interrupts can be forwarded to one of two output lines. Nothing
82 * clever is done, so if the masks are incorrectly set, a single input
83 * interrupt could generate interrupts on both output lines!
84 *
85 * The dual lines are there to allow the chained interrupts to be easily
86 * passed into two different cores. We currently do not use this functionality
87 * in this driver.
88 *
89 * Controller can also be configured to generate Machine checks (MCP), again on
90 * two lines, to be attached to two different cores. It is suggested that these
91 * should be masked out.
92 */
93
gef_pic_cascade(struct irq_desc * desc)94 static void gef_pic_cascade(struct irq_desc *desc)
95 {
96 struct irq_chip *chip = irq_desc_get_chip(desc);
97 unsigned int cascade_irq;
98
99 /*
100 * See if we actually have an interrupt, call generic handling code if
101 * we do.
102 */
103 cascade_irq = gef_pic_get_irq();
104
105 if (cascade_irq)
106 generic_handle_irq(cascade_irq);
107
108 chip->irq_eoi(&desc->irq_data);
109 }
110
gef_pic_mask(struct irq_data * d)111 static void gef_pic_mask(struct irq_data *d)
112 {
113 unsigned long flags;
114 unsigned int hwirq = irqd_to_hwirq(d);
115 u32 mask;
116
117 raw_spin_lock_irqsave(&gef_pic_lock, flags);
118 mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
119 mask &= ~(1 << hwirq);
120 out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
121 raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
122 }
123
gef_pic_mask_ack(struct irq_data * d)124 static void gef_pic_mask_ack(struct irq_data *d)
125 {
126 /* Don't think we actually have to do anything to ack an interrupt,
127 * we just need to clear down the devices interrupt and it will go away
128 */
129 gef_pic_mask(d);
130 }
131
gef_pic_unmask(struct irq_data * d)132 static void gef_pic_unmask(struct irq_data *d)
133 {
134 unsigned long flags;
135 unsigned int hwirq = irqd_to_hwirq(d);
136 u32 mask;
137
138 raw_spin_lock_irqsave(&gef_pic_lock, flags);
139 mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
140 mask |= (1 << hwirq);
141 out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
142 raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
143 }
144
145 static struct irq_chip gef_pic_chip = {
146 .name = "gefp",
147 .irq_mask = gef_pic_mask,
148 .irq_mask_ack = gef_pic_mask_ack,
149 .irq_unmask = gef_pic_unmask,
150 };
151
152
153 /* When an interrupt is being configured, this call allows some flexibilty
154 * in deciding which irq_chip structure is used
155 */
gef_pic_host_map(struct irq_domain * h,unsigned int virq,irq_hw_number_t hwirq)156 static int gef_pic_host_map(struct irq_domain *h, unsigned int virq,
157 irq_hw_number_t hwirq)
158 {
159 /* All interrupts are LEVEL sensitive */
160 irq_set_status_flags(virq, IRQ_LEVEL);
161 irq_set_chip_and_handler(virq, &gef_pic_chip, handle_level_irq);
162
163 return 0;
164 }
165
gef_pic_host_xlate(struct irq_domain * h,struct device_node * ct,const u32 * intspec,unsigned int intsize,irq_hw_number_t * out_hwirq,unsigned int * out_flags)166 static int gef_pic_host_xlate(struct irq_domain *h, struct device_node *ct,
167 const u32 *intspec, unsigned int intsize,
168 irq_hw_number_t *out_hwirq, unsigned int *out_flags)
169 {
170
171 *out_hwirq = intspec[0];
172 if (intsize > 1)
173 *out_flags = intspec[1];
174 else
175 *out_flags = IRQ_TYPE_LEVEL_HIGH;
176
177 return 0;
178 }
179
180 static const struct irq_domain_ops gef_pic_host_ops = {
181 .map = gef_pic_host_map,
182 .xlate = gef_pic_host_xlate,
183 };
184
185
186 /*
187 * Initialisation of PIC, this should be called in BSP
188 */
gef_pic_init(struct device_node * np)189 void __init gef_pic_init(struct device_node *np)
190 {
191 unsigned long flags;
192
193 /* Map the devices registers into memory */
194 gef_pic_irq_reg_base = of_iomap(np, 0);
195
196 raw_spin_lock_irqsave(&gef_pic_lock, flags);
197
198 /* Initialise everything as masked. */
199 out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_INTR_MASK, 0);
200 out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_INTR_MASK, 0);
201
202 out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_MCP_MASK, 0);
203 out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_MCP_MASK, 0);
204
205 raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
206
207 /* Map controller */
208 gef_pic_cascade_irq = irq_of_parse_and_map(np, 0);
209 if (!gef_pic_cascade_irq) {
210 printk(KERN_ERR "SBC610: failed to map cascade interrupt");
211 return;
212 }
213
214 /* Setup an irq_domain structure */
215 gef_pic_irq_host = irq_domain_add_linear(np, GEF_PIC_NUM_IRQS,
216 &gef_pic_host_ops, NULL);
217 if (gef_pic_irq_host == NULL)
218 return;
219
220 /* Chain with parent controller */
221 irq_set_chained_handler(gef_pic_cascade_irq, gef_pic_cascade);
222 }
223
224 /*
225 * This is called when we receive an interrupt with apparently comes from this
226 * chip - check, returning the highest interrupt generated or return 0.
227 */
gef_pic_get_irq(void)228 unsigned int gef_pic_get_irq(void)
229 {
230 u32 cause, mask, active;
231 unsigned int virq = 0;
232 int hwirq;
233
234 cause = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_STATUS);
235
236 mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
237
238 active = cause & mask;
239
240 if (active) {
241 for (hwirq = GEF_PIC_NUM_IRQS - 1; hwirq > -1; hwirq--) {
242 if (active & (0x1 << hwirq))
243 break;
244 }
245 virq = irq_linear_revmap(gef_pic_irq_host,
246 (irq_hw_number_t)hwirq);
247 }
248
249 return virq;
250 }
251
252