1 /* SPDX-License-Identifier: GPL-2.0-only */ 2 /* 3 * Interface the pinmux subsystem 4 * 5 * Copyright (C) 2011 ST-Ericsson SA 6 * Written on behalf of Linaro for ST-Ericsson 7 * Based on bits of regulator core, gpio core and clk core 8 * 9 * Author: Linus Walleij <linus.walleij@linaro.org> 10 */ 11 #ifndef __LINUX_PINCTRL_PINMUX_H 12 #define __LINUX_PINCTRL_PINMUX_H 13 14 #include <linux/list.h> 15 #include <linux/seq_file.h> 16 #include <linux/pinctrl/pinctrl.h> 17 18 struct pinctrl_dev; 19 20 /** 21 * struct pinmux_ops - pinmux operations, to be implemented by pin controller 22 * drivers that support pinmuxing 23 * @request: called by the core to see if a certain pin can be made 24 * available for muxing. This is called by the core to acquire the pins 25 * before selecting any actual mux setting across a function. The driver 26 * is allowed to answer "no" by returning a negative error code 27 * @free: the reverse function of the request() callback, frees a pin after 28 * being requested 29 * @get_functions_count: returns number of selectable named functions available 30 * in this pinmux driver 31 * @get_function_name: return the function name of the muxing selector, 32 * called by the core to figure out which mux setting it shall map a 33 * certain device to 34 * @get_function_groups: return an array of groups names (in turn 35 * referencing pins) connected to a certain function selector. The group 36 * name can be used with the generic @pinctrl_ops to retrieve the 37 * actual pins affected. The applicable groups will be returned in 38 * @groups and the number of groups in @num_groups 39 * @set_mux: enable a certain muxing function with a certain pin group. The 40 * driver does not need to figure out whether enabling this function 41 * conflicts some other use of the pins in that group, such collisions 42 * are handled by the pinmux subsystem. The @func_selector selects a 43 * certain function whereas @group_selector selects a certain set of pins 44 * to be used. On simple controllers the latter argument may be ignored 45 * @gpio_request_enable: requests and enables GPIO on a certain pin. 46 * Implement this only if you can mux every pin individually as GPIO. The 47 * affected GPIO range is passed along with an offset(pin number) into that 48 * specific GPIO range - function selectors and pin groups are orthogonal 49 * to this, the core will however make sure the pins do not collide. 50 * @gpio_disable_free: free up GPIO muxing on a certain pin, the reverse of 51 * @gpio_request_enable 52 * @gpio_set_direction: Since controllers may need different configurations 53 * depending on whether the GPIO is configured as input or output, 54 * a direction selector function may be implemented as a backing 55 * to the GPIO controllers that need pin muxing. 56 * @strict: do not allow simultaneous use of the same pin for GPIO and another 57 * function. Check both gpio_owner and mux_owner strictly before approving 58 * the pin request. 59 */ 60 struct pinmux_ops { 61 int (*request) (struct pinctrl_dev *pctldev, unsigned offset); 62 int (*free) (struct pinctrl_dev *pctldev, unsigned offset); 63 int (*get_functions_count) (struct pinctrl_dev *pctldev); 64 const char *(*get_function_name) (struct pinctrl_dev *pctldev, 65 unsigned selector); 66 int (*get_function_groups) (struct pinctrl_dev *pctldev, 67 unsigned selector, 68 const char * const **groups, 69 unsigned *num_groups); 70 int (*set_mux) (struct pinctrl_dev *pctldev, unsigned func_selector, 71 unsigned group_selector); 72 int (*gpio_request_enable) (struct pinctrl_dev *pctldev, 73 struct pinctrl_gpio_range *range, 74 unsigned offset); 75 void (*gpio_disable_free) (struct pinctrl_dev *pctldev, 76 struct pinctrl_gpio_range *range, 77 unsigned offset); 78 int (*gpio_set_direction) (struct pinctrl_dev *pctldev, 79 struct pinctrl_gpio_range *range, 80 unsigned offset, 81 bool input); 82 bool strict; 83 }; 84 85 #endif /* __LINUX_PINCTRL_PINMUX_H */ 86