1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3 * (C) Copyright 2008 Semihalf
4 *
5 * (C) Copyright 2000-2005
6 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
7 ********************************************************************
8 * NOTE: This header file defines an interface to U-Boot. Including
9 * this (unmodified) header file in another file is considered normal
10 * use of U-Boot, and does *not* fall under the heading of "derived
11 * work".
12 ********************************************************************
13 */
14
15 #ifndef __IMAGE_H__
16 #define __IMAGE_H__
17
18 #include "compiler.h"
19 #include <asm/byteorder.h>
20 #include <stdbool.h>
21
22 /* Define this to avoid #ifdefs later on */
23 struct lmb;
24 struct fdt_region;
25
26 #ifdef USE_HOSTCC
27 #include <sys/types.h>
28
29 /* new uImage format support enabled on host */
30 #define IMAGE_ENABLE_FIT 1
31 #define IMAGE_ENABLE_OF_LIBFDT 1
32 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
33 #define CONFIG_FIT_ENABLE_RSASSA_PSS_SUPPORT 1
34 #define CONFIG_FIT_ENABLE_SHA256_SUPPORT
35 #define CONFIG_FIT_ENABLE_SHA384_SUPPORT
36 #define CONFIG_FIT_ENABLE_SHA512_SUPPORT
37 #define CONFIG_SHA1
38 #define CONFIG_SHA256
39 #define CONFIG_SHA384
40 #define CONFIG_SHA512
41
42 #define IMAGE_ENABLE_IGNORE 0
43 #define IMAGE_INDENT_STRING ""
44
45 #else
46
47 #include <lmb.h>
48 #include <asm/u-boot.h>
49 #include <command.h>
50
51 /* Take notice of the 'ignore' property for hashes */
52 #define IMAGE_ENABLE_IGNORE 1
53 #define IMAGE_INDENT_STRING " "
54
55 #define IMAGE_ENABLE_FIT CONFIG_IS_ENABLED(FIT)
56 #define IMAGE_ENABLE_OF_LIBFDT CONFIG_IS_ENABLED(OF_LIBFDT)
57
58 #endif /* USE_HOSTCC */
59
60 #if IMAGE_ENABLE_FIT
61 #include <hash.h>
62 #include <linux/libfdt.h>
63 #include <fdt_support.h>
64 # ifdef CONFIG_SPL_BUILD
65 # ifdef CONFIG_SPL_CRC32_SUPPORT
66 # define IMAGE_ENABLE_CRC32 1
67 # endif
68 # ifdef CONFIG_SPL_MD5_SUPPORT
69 # define IMAGE_ENABLE_MD5 1
70 # endif
71 # ifdef CONFIG_SPL_SHA1_SUPPORT
72 # define IMAGE_ENABLE_SHA1 1
73 # endif
74 # else
75 # define IMAGE_ENABLE_CRC32 1
76 # define IMAGE_ENABLE_MD5 1
77 # define IMAGE_ENABLE_SHA1 1
78 # endif
79
80 #ifndef IMAGE_ENABLE_CRC32
81 #define IMAGE_ENABLE_CRC32 0
82 #endif
83
84 #ifndef IMAGE_ENABLE_MD5
85 #define IMAGE_ENABLE_MD5 0
86 #endif
87
88 #ifndef IMAGE_ENABLE_SHA1
89 #define IMAGE_ENABLE_SHA1 0
90 #endif
91
92 #if defined(CONFIG_FIT_ENABLE_SHA256_SUPPORT) || \
93 defined(CONFIG_SPL_SHA256_SUPPORT)
94 #define IMAGE_ENABLE_SHA256 1
95 #else
96 #define IMAGE_ENABLE_SHA256 0
97 #endif
98
99 #if defined(CONFIG_FIT_ENABLE_SHA384_SUPPORT) || \
100 defined(CONFIG_SPL_SHA384_SUPPORT)
101 #define IMAGE_ENABLE_SHA384 1
102 #else
103 #define IMAGE_ENABLE_SHA384 0
104 #endif
105
106 #if defined(CONFIG_FIT_ENABLE_SHA512_SUPPORT) || \
107 defined(CONFIG_SPL_SHA512_SUPPORT)
108 #define IMAGE_ENABLE_SHA512 1
109 #else
110 #define IMAGE_ENABLE_SHA512 0
111 #endif
112
113 #endif /* IMAGE_ENABLE_FIT */
114
115 #ifdef CONFIG_SYS_BOOT_GET_CMDLINE
116 # define IMAGE_BOOT_GET_CMDLINE 1
117 #else
118 # define IMAGE_BOOT_GET_CMDLINE 0
119 #endif
120
121 #ifdef CONFIG_OF_BOARD_SETUP
122 # define IMAGE_OF_BOARD_SETUP 1
123 #else
124 # define IMAGE_OF_BOARD_SETUP 0
125 #endif
126
127 #ifdef CONFIG_OF_SYSTEM_SETUP
128 # define IMAGE_OF_SYSTEM_SETUP 1
129 #else
130 # define IMAGE_OF_SYSTEM_SETUP 0
131 #endif
132
133 extern ulong image_load_addr; /* Default Load Address */
134 extern ulong image_save_addr; /* Default Save Address */
135 extern ulong image_save_size; /* Default Save Size */
136
137 /* An invalid size, meaning that the image size is not known */
138 #define IMAGE_SIZE_INVAL (-1UL)
139
140 enum ih_category {
141 IH_ARCH,
142 IH_COMP,
143 IH_OS,
144 IH_TYPE,
145
146 IH_COUNT,
147 };
148
149 /*
150 * Operating System Codes
151 *
152 * The following are exposed to uImage header.
153 * New IDs *MUST* be appended at the end of the list and *NEVER*
154 * inserted for backward compatibility.
155 */
156 enum {
157 IH_OS_INVALID = 0, /* Invalid OS */
158 IH_OS_OPENBSD, /* OpenBSD */
159 IH_OS_NETBSD, /* NetBSD */
160 IH_OS_FREEBSD, /* FreeBSD */
161 IH_OS_4_4BSD, /* 4.4BSD */
162 IH_OS_LINUX, /* Linux */
163 IH_OS_SVR4, /* SVR4 */
164 IH_OS_ESIX, /* Esix */
165 IH_OS_SOLARIS, /* Solaris */
166 IH_OS_IRIX, /* Irix */
167 IH_OS_SCO, /* SCO */
168 IH_OS_DELL, /* Dell */
169 IH_OS_NCR, /* NCR */
170 IH_OS_LYNXOS, /* LynxOS */
171 IH_OS_VXWORKS, /* VxWorks */
172 IH_OS_PSOS, /* pSOS */
173 IH_OS_QNX, /* QNX */
174 IH_OS_U_BOOT, /* Firmware */
175 IH_OS_RTEMS, /* RTEMS */
176 IH_OS_ARTOS, /* ARTOS */
177 IH_OS_UNITY, /* Unity OS */
178 IH_OS_INTEGRITY, /* INTEGRITY */
179 IH_OS_OSE, /* OSE */
180 IH_OS_PLAN9, /* Plan 9 */
181 IH_OS_OPENRTOS, /* OpenRTOS */
182 IH_OS_ARM_TRUSTED_FIRMWARE, /* ARM Trusted Firmware */
183 IH_OS_TEE, /* Trusted Execution Environment */
184 IH_OS_OPENSBI, /* RISC-V OpenSBI */
185 IH_OS_EFI, /* EFI Firmware (e.g. GRUB2) */
186
187 IH_OS_COUNT,
188 };
189
190 /*
191 * CPU Architecture Codes (supported by Linux)
192 *
193 * The following are exposed to uImage header.
194 * New IDs *MUST* be appended at the end of the list and *NEVER*
195 * inserted for backward compatibility.
196 */
197 enum {
198 IH_ARCH_INVALID = 0, /* Invalid CPU */
199 IH_ARCH_ALPHA, /* Alpha */
200 IH_ARCH_ARM, /* ARM */
201 IH_ARCH_I386, /* Intel x86 */
202 IH_ARCH_IA64, /* IA64 */
203 IH_ARCH_MIPS, /* MIPS */
204 IH_ARCH_MIPS64, /* MIPS 64 Bit */
205 IH_ARCH_PPC, /* PowerPC */
206 IH_ARCH_S390, /* IBM S390 */
207 IH_ARCH_SH, /* SuperH */
208 IH_ARCH_SPARC, /* Sparc */
209 IH_ARCH_SPARC64, /* Sparc 64 Bit */
210 IH_ARCH_M68K, /* M68K */
211 IH_ARCH_NIOS, /* Nios-32 */
212 IH_ARCH_MICROBLAZE, /* MicroBlaze */
213 IH_ARCH_NIOS2, /* Nios-II */
214 IH_ARCH_BLACKFIN, /* Blackfin */
215 IH_ARCH_AVR32, /* AVR32 */
216 IH_ARCH_ST200, /* STMicroelectronics ST200 */
217 IH_ARCH_SANDBOX, /* Sandbox architecture (test only) */
218 IH_ARCH_NDS32, /* ANDES Technology - NDS32 */
219 IH_ARCH_OPENRISC, /* OpenRISC 1000 */
220 IH_ARCH_ARM64, /* ARM64 */
221 IH_ARCH_ARC, /* Synopsys DesignWare ARC */
222 IH_ARCH_X86_64, /* AMD x86_64, Intel and Via */
223 IH_ARCH_XTENSA, /* Xtensa */
224 IH_ARCH_RISCV, /* RISC-V */
225
226 IH_ARCH_COUNT,
227 };
228
229 /*
230 * Image Types
231 *
232 * "Standalone Programs" are directly runnable in the environment
233 * provided by U-Boot; it is expected that (if they behave
234 * well) you can continue to work in U-Boot after return from
235 * the Standalone Program.
236 * "OS Kernel Images" are usually images of some Embedded OS which
237 * will take over control completely. Usually these programs
238 * will install their own set of exception handlers, device
239 * drivers, set up the MMU, etc. - this means, that you cannot
240 * expect to re-enter U-Boot except by resetting the CPU.
241 * "RAMDisk Images" are more or less just data blocks, and their
242 * parameters (address, size) are passed to an OS kernel that is
243 * being started.
244 * "Multi-File Images" contain several images, typically an OS
245 * (Linux) kernel image and one or more data images like
246 * RAMDisks. This construct is useful for instance when you want
247 * to boot over the network using BOOTP etc., where the boot
248 * server provides just a single image file, but you want to get
249 * for instance an OS kernel and a RAMDisk image.
250 *
251 * "Multi-File Images" start with a list of image sizes, each
252 * image size (in bytes) specified by an "uint32_t" in network
253 * byte order. This list is terminated by an "(uint32_t)0".
254 * Immediately after the terminating 0 follow the images, one by
255 * one, all aligned on "uint32_t" boundaries (size rounded up to
256 * a multiple of 4 bytes - except for the last file).
257 *
258 * "Firmware Images" are binary images containing firmware (like
259 * U-Boot or FPGA images) which usually will be programmed to
260 * flash memory.
261 *
262 * "Script files" are command sequences that will be executed by
263 * U-Boot's command interpreter; this feature is especially
264 * useful when you configure U-Boot to use a real shell (hush)
265 * as command interpreter (=> Shell Scripts).
266 *
267 * The following are exposed to uImage header.
268 * New IDs *MUST* be appended at the end of the list and *NEVER*
269 * inserted for backward compatibility.
270 */
271
272 enum {
273 IH_TYPE_INVALID = 0, /* Invalid Image */
274 IH_TYPE_STANDALONE, /* Standalone Program */
275 IH_TYPE_KERNEL, /* OS Kernel Image */
276 IH_TYPE_RAMDISK, /* RAMDisk Image */
277 IH_TYPE_MULTI, /* Multi-File Image */
278 IH_TYPE_FIRMWARE, /* Firmware Image */
279 IH_TYPE_SCRIPT, /* Script file */
280 IH_TYPE_FILESYSTEM, /* Filesystem Image (any type) */
281 IH_TYPE_FLATDT, /* Binary Flat Device Tree Blob */
282 IH_TYPE_KWBIMAGE, /* Kirkwood Boot Image */
283 IH_TYPE_IMXIMAGE, /* Freescale IMXBoot Image */
284 IH_TYPE_UBLIMAGE, /* Davinci UBL Image */
285 IH_TYPE_OMAPIMAGE, /* TI OMAP Config Header Image */
286 IH_TYPE_AISIMAGE, /* TI Davinci AIS Image */
287 /* OS Kernel Image, can run from any load address */
288 IH_TYPE_KERNEL_NOLOAD,
289 IH_TYPE_PBLIMAGE, /* Freescale PBL Boot Image */
290 IH_TYPE_MXSIMAGE, /* Freescale MXSBoot Image */
291 IH_TYPE_GPIMAGE, /* TI Keystone GPHeader Image */
292 IH_TYPE_ATMELIMAGE, /* ATMEL ROM bootable Image */
293 IH_TYPE_SOCFPGAIMAGE, /* Altera SOCFPGA CV/AV Preloader */
294 IH_TYPE_X86_SETUP, /* x86 setup.bin Image */
295 IH_TYPE_LPC32XXIMAGE, /* x86 setup.bin Image */
296 IH_TYPE_LOADABLE, /* A list of typeless images */
297 IH_TYPE_RKIMAGE, /* Rockchip Boot Image */
298 IH_TYPE_RKSD, /* Rockchip SD card */
299 IH_TYPE_RKSPI, /* Rockchip SPI image */
300 IH_TYPE_ZYNQIMAGE, /* Xilinx Zynq Boot Image */
301 IH_TYPE_ZYNQMPIMAGE, /* Xilinx ZynqMP Boot Image */
302 IH_TYPE_ZYNQMPBIF, /* Xilinx ZynqMP Boot Image (bif) */
303 IH_TYPE_FPGA, /* FPGA Image */
304 IH_TYPE_VYBRIDIMAGE, /* VYBRID .vyb Image */
305 IH_TYPE_TEE, /* Trusted Execution Environment OS Image */
306 IH_TYPE_FIRMWARE_IVT, /* Firmware Image with HABv4 IVT */
307 IH_TYPE_PMMC, /* TI Power Management Micro-Controller Firmware */
308 IH_TYPE_STM32IMAGE, /* STMicroelectronics STM32 Image */
309 IH_TYPE_SOCFPGAIMAGE_V1, /* Altera SOCFPGA A10 Preloader */
310 IH_TYPE_MTKIMAGE, /* MediaTek BootROM loadable Image */
311 IH_TYPE_IMX8MIMAGE, /* Freescale IMX8MBoot Image */
312 IH_TYPE_IMX8IMAGE, /* Freescale IMX8Boot Image */
313 IH_TYPE_COPRO, /* Coprocessor Image for remoteproc*/
314 IH_TYPE_SUNXI_EGON, /* Allwinner eGON Boot Image */
315
316 IH_TYPE_COUNT, /* Number of image types */
317 };
318
319 /*
320 * Compression Types
321 *
322 * The following are exposed to uImage header.
323 * New IDs *MUST* be appended at the end of the list and *NEVER*
324 * inserted for backward compatibility.
325 */
326 enum {
327 IH_COMP_NONE = 0, /* No Compression Used */
328 IH_COMP_GZIP, /* gzip Compression Used */
329 IH_COMP_BZIP2, /* bzip2 Compression Used */
330 IH_COMP_LZMA, /* lzma Compression Used */
331 IH_COMP_LZO, /* lzo Compression Used */
332 IH_COMP_LZ4, /* lz4 Compression Used */
333 IH_COMP_ZSTD, /* zstd Compression Used */
334
335 IH_COMP_COUNT,
336 };
337
338 #define LZ4F_MAGIC 0x184D2204 /* LZ4 Magic Number */
339 #define IH_MAGIC 0x27051956 /* Image Magic Number */
340 #define IH_NMLEN 32 /* Image Name Length */
341
342 /* Reused from common.h */
343 #define ROUND(a, b) (((a) + (b) - 1) & ~((b) - 1))
344
345 /*
346 * Legacy format image header,
347 * all data in network byte order (aka natural aka bigendian).
348 */
349 typedef struct image_header {
350 uint32_t ih_magic; /* Image Header Magic Number */
351 uint32_t ih_hcrc; /* Image Header CRC Checksum */
352 uint32_t ih_time; /* Image Creation Timestamp */
353 uint32_t ih_size; /* Image Data Size */
354 uint32_t ih_load; /* Data Load Address */
355 uint32_t ih_ep; /* Entry Point Address */
356 uint32_t ih_dcrc; /* Image Data CRC Checksum */
357 uint8_t ih_os; /* Operating System */
358 uint8_t ih_arch; /* CPU architecture */
359 uint8_t ih_type; /* Image Type */
360 uint8_t ih_comp; /* Compression Type */
361 uint8_t ih_name[IH_NMLEN]; /* Image Name */
362 } image_header_t;
363
364 typedef struct image_info {
365 ulong start, end; /* start/end of blob */
366 ulong image_start, image_len; /* start of image within blob, len of image */
367 ulong load; /* load addr for the image */
368 uint8_t comp, type, os; /* compression, type of image, os type */
369 uint8_t arch; /* CPU architecture */
370 } image_info_t;
371
372 /*
373 * Legacy and FIT format headers used by do_bootm() and do_bootm_<os>()
374 * routines.
375 */
376 typedef struct bootm_headers {
377 /*
378 * Legacy os image header, if it is a multi component image
379 * then boot_get_ramdisk() and get_fdt() will attempt to get
380 * data from second and third component accordingly.
381 */
382 image_header_t *legacy_hdr_os; /* image header pointer */
383 image_header_t legacy_hdr_os_copy; /* header copy */
384 ulong legacy_hdr_valid;
385
386 #if IMAGE_ENABLE_FIT
387 const char *fit_uname_cfg; /* configuration node unit name */
388
389 void *fit_hdr_os; /* os FIT image header */
390 const char *fit_uname_os; /* os subimage node unit name */
391 int fit_noffset_os; /* os subimage node offset */
392
393 void *fit_hdr_rd; /* init ramdisk FIT image header */
394 const char *fit_uname_rd; /* init ramdisk subimage node unit name */
395 int fit_noffset_rd; /* init ramdisk subimage node offset */
396
397 void *fit_hdr_fdt; /* FDT blob FIT image header */
398 const char *fit_uname_fdt; /* FDT blob subimage node unit name */
399 int fit_noffset_fdt;/* FDT blob subimage node offset */
400
401 void *fit_hdr_setup; /* x86 setup FIT image header */
402 const char *fit_uname_setup; /* x86 setup subimage node name */
403 int fit_noffset_setup;/* x86 setup subimage node offset */
404 #endif
405
406 #ifndef USE_HOSTCC
407 image_info_t os; /* os image info */
408 ulong ep; /* entry point of OS */
409
410 ulong rd_start, rd_end;/* ramdisk start/end */
411
412 char *ft_addr; /* flat dev tree address */
413 ulong ft_len; /* length of flat device tree */
414
415 ulong initrd_start;
416 ulong initrd_end;
417 ulong cmdline_start;
418 ulong cmdline_end;
419 struct bd_info *kbd;
420 #endif
421
422 int verify; /* env_get("verify")[0] != 'n' */
423
424 #define BOOTM_STATE_START (0x00000001)
425 #define BOOTM_STATE_FINDOS (0x00000002)
426 #define BOOTM_STATE_FINDOTHER (0x00000004)
427 #define BOOTM_STATE_LOADOS (0x00000008)
428 #define BOOTM_STATE_RAMDISK (0x00000010)
429 #define BOOTM_STATE_FDT (0x00000020)
430 #define BOOTM_STATE_OS_CMDLINE (0x00000040)
431 #define BOOTM_STATE_OS_BD_T (0x00000080)
432 #define BOOTM_STATE_OS_PREP (0x00000100)
433 #define BOOTM_STATE_OS_FAKE_GO (0x00000200) /* 'Almost' run the OS */
434 #define BOOTM_STATE_OS_GO (0x00000400)
435 int state;
436
437 #ifdef CONFIG_LMB
438 struct lmb lmb; /* for memory mgmt */
439 #endif
440 } bootm_headers_t;
441
442 extern bootm_headers_t images;
443
444 /*
445 * Some systems (for example LWMON) have very short watchdog periods;
446 * we must make sure to split long operations like memmove() or
447 * checksum calculations into reasonable chunks.
448 */
449 #ifndef CHUNKSZ
450 #define CHUNKSZ (64 * 1024)
451 #endif
452
453 #ifndef CHUNKSZ_CRC32
454 #define CHUNKSZ_CRC32 (64 * 1024)
455 #endif
456
457 #ifndef CHUNKSZ_MD5
458 #define CHUNKSZ_MD5 (64 * 1024)
459 #endif
460
461 #ifndef CHUNKSZ_SHA1
462 #define CHUNKSZ_SHA1 (64 * 1024)
463 #endif
464
465 #define uimage_to_cpu(x) be32_to_cpu(x)
466 #define cpu_to_uimage(x) cpu_to_be32(x)
467
468 /*
469 * Translation table for entries of a specific type; used by
470 * get_table_entry_id() and get_table_entry_name().
471 */
472 typedef struct table_entry {
473 int id;
474 char *sname; /* short (input) name to find table entry */
475 char *lname; /* long (output) name to print for messages */
476 } table_entry_t;
477
478 /*
479 * Compression type and magic number mapping table.
480 */
481 struct comp_magic_map {
482 int comp_id;
483 const char *name;
484 unsigned char magic[2];
485 };
486
487 /*
488 * get_table_entry_id() scans the translation table trying to find an
489 * entry that matches the given short name. If a matching entry is
490 * found, it's id is returned to the caller.
491 */
492 int get_table_entry_id(const table_entry_t *table,
493 const char *table_name, const char *name);
494 /*
495 * get_table_entry_name() scans the translation table trying to find
496 * an entry that matches the given id. If a matching entry is found,
497 * its long name is returned to the caller.
498 */
499 char *get_table_entry_name(const table_entry_t *table, char *msg, int id);
500
501 const char *genimg_get_os_name(uint8_t os);
502
503 /**
504 * genimg_get_os_short_name() - get the short name for an OS
505 *
506 * @param os OS (IH_OS_...)
507 * @return OS short name, or "unknown" if unknown
508 */
509 const char *genimg_get_os_short_name(uint8_t comp);
510
511 const char *genimg_get_arch_name(uint8_t arch);
512
513 /**
514 * genimg_get_arch_short_name() - get the short name for an architecture
515 *
516 * @param arch Architecture type (IH_ARCH_...)
517 * @return architecture short name, or "unknown" if unknown
518 */
519 const char *genimg_get_arch_short_name(uint8_t arch);
520
521 const char *genimg_get_type_name(uint8_t type);
522
523 /**
524 * genimg_get_type_short_name() - get the short name for an image type
525 *
526 * @param type Image type (IH_TYPE_...)
527 * @return image short name, or "unknown" if unknown
528 */
529 const char *genimg_get_type_short_name(uint8_t type);
530
531 const char *genimg_get_comp_name(uint8_t comp);
532
533 /**
534 * genimg_get_comp_short_name() - get the short name for a compression method
535 *
536 * @param comp compression method (IH_COMP_...)
537 * @return compression method short name, or "unknown" if unknown
538 */
539 const char *genimg_get_comp_short_name(uint8_t comp);
540
541 /**
542 * genimg_get_cat_name() - Get the name of an item in a category
543 *
544 * @category: Category of item
545 * @id: Item ID
546 * @return name of item, or "Unknown ..." if unknown
547 */
548 const char *genimg_get_cat_name(enum ih_category category, uint id);
549
550 /**
551 * genimg_get_cat_short_name() - Get the short name of an item in a category
552 *
553 * @category: Category of item
554 * @id: Item ID
555 * @return short name of item, or "Unknown ..." if unknown
556 */
557 const char *genimg_get_cat_short_name(enum ih_category category, uint id);
558
559 /**
560 * genimg_get_cat_count() - Get the number of items in a category
561 *
562 * @category: Category to check
563 * @return the number of items in the category (IH_xxx_COUNT)
564 */
565 int genimg_get_cat_count(enum ih_category category);
566
567 /**
568 * genimg_get_cat_desc() - Get the description of a category
569 *
570 * @category: Category to check
571 * @return the description of a category, e.g. "architecture". This
572 * effectively converts the enum to a string.
573 */
574 const char *genimg_get_cat_desc(enum ih_category category);
575
576 /**
577 * genimg_cat_has_id() - Check whether a category has an item
578 *
579 * @category: Category to check
580 * @id: Item ID
581 * @return true or false as to whether a category has an item
582 */
583 bool genimg_cat_has_id(enum ih_category category, uint id);
584
585 int genimg_get_os_id(const char *name);
586 int genimg_get_arch_id(const char *name);
587 int genimg_get_type_id(const char *name);
588 int genimg_get_comp_id(const char *name);
589 void genimg_print_size(uint32_t size);
590
591 #if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || \
592 defined(USE_HOSTCC)
593 #define IMAGE_ENABLE_TIMESTAMP 1
594 #else
595 #define IMAGE_ENABLE_TIMESTAMP 0
596 #endif
597 void genimg_print_time(time_t timestamp);
598
599 /* What to do with a image load address ('load = <> 'in the FIT) */
600 enum fit_load_op {
601 FIT_LOAD_IGNORED, /* Ignore load address */
602 FIT_LOAD_OPTIONAL, /* Can be provided, but optional */
603 FIT_LOAD_OPTIONAL_NON_ZERO, /* Optional, a value of 0 is ignored */
604 FIT_LOAD_REQUIRED, /* Must be provided */
605 };
606
607 int boot_get_setup(bootm_headers_t *images, uint8_t arch, ulong *setup_start,
608 ulong *setup_len);
609
610 #ifndef USE_HOSTCC
611 /* Image format types, returned by _get_format() routine */
612 #define IMAGE_FORMAT_INVALID 0x00
613 #if defined(CONFIG_LEGACY_IMAGE_FORMAT)
614 #define IMAGE_FORMAT_LEGACY 0x01 /* legacy image_header based format */
615 #endif
616 #define IMAGE_FORMAT_FIT 0x02 /* new, libfdt based format */
617 #define IMAGE_FORMAT_ANDROID 0x03 /* Android boot image */
618
619 ulong genimg_get_kernel_addr_fit(char * const img_addr,
620 const char **fit_uname_config,
621 const char **fit_uname_kernel);
622 ulong genimg_get_kernel_addr(char * const img_addr);
623 int genimg_get_format(const void *img_addr);
624 int genimg_has_config(bootm_headers_t *images);
625
626 int boot_get_fpga(int argc, char *const argv[], bootm_headers_t *images,
627 uint8_t arch, const ulong *ld_start, ulong * const ld_len);
628 int boot_get_ramdisk(int argc, char *const argv[], bootm_headers_t *images,
629 uint8_t arch, ulong *rd_start, ulong *rd_end);
630
631 /**
632 * boot_get_loadable - routine to load a list of binaries to memory
633 * @argc: Ignored Argument
634 * @argv: Ignored Argument
635 * @images: pointer to the bootm images structure
636 * @arch: expected architecture for the image
637 * @ld_start: Ignored Argument
638 * @ld_len: Ignored Argument
639 *
640 * boot_get_loadable() will take the given FIT configuration, and look
641 * for a field named "loadables". Loadables, is a list of elements in
642 * the FIT given as strings. exe:
643 * loadables = "linux_kernel", "fdt-2";
644 * this function will attempt to parse each string, and load the
645 * corresponding element from the FIT into memory. Once placed,
646 * no aditional actions are taken.
647 *
648 * @return:
649 * 0, if only valid images or no images are found
650 * error code, if an error occurs during fit_image_load
651 */
652 int boot_get_loadable(int argc, char *const argv[], bootm_headers_t *images,
653 uint8_t arch, const ulong *ld_start, ulong *const ld_len);
654 #endif /* !USE_HOSTCC */
655
656 int boot_get_setup_fit(bootm_headers_t *images, uint8_t arch,
657 ulong *setup_start, ulong *setup_len);
658
659 /**
660 * boot_get_fdt_fit() - load a DTB from a FIT file (applying overlays)
661 *
662 * This deals with all aspects of loading an DTB from a FIT.
663 * The correct base image based on configuration will be selected, and
664 * then any overlays specified will be applied (as present in fit_uname_configp).
665 *
666 * @param images Boot images structure
667 * @param addr Address of FIT in memory
668 * @param fit_unamep On entry this is the requested image name
669 * (e.g. "kernel") or NULL to use the default. On exit
670 * points to the selected image name
671 * @param fit_uname_configp On entry this is the requested configuration
672 * name (e.g. "conf-1") or NULL to use the default. On
673 * exit points to the selected configuration name.
674 * @param arch Expected architecture (IH_ARCH_...)
675 * @param datap Returns address of loaded image
676 * @param lenp Returns length of loaded image
677 *
678 * @return node offset of base image, or -ve error code on error
679 */
680 int boot_get_fdt_fit(bootm_headers_t *images, ulong addr,
681 const char **fit_unamep, const char **fit_uname_configp,
682 int arch, ulong *datap, ulong *lenp);
683
684 /**
685 * fit_image_load() - load an image from a FIT
686 *
687 * This deals with all aspects of loading an image from a FIT, including
688 * selecting the right image based on configuration, verifying it, printing
689 * out progress messages, checking the type/arch/os and optionally copying it
690 * to the right load address.
691 *
692 * The property to look up is defined by image_type.
693 *
694 * @param images Boot images structure
695 * @param addr Address of FIT in memory
696 * @param fit_unamep On entry this is the requested image name
697 * (e.g. "kernel") or NULL to use the default. On exit
698 * points to the selected image name
699 * @param fit_uname_configp On entry this is the requested configuration
700 * name (e.g. "conf-1") or NULL to use the default. On
701 * exit points to the selected configuration name.
702 * @param arch Expected architecture (IH_ARCH_...)
703 * @param image_type Required image type (IH_TYPE_...). If this is
704 * IH_TYPE_KERNEL then we allow IH_TYPE_KERNEL_NOLOAD
705 * also.
706 * @param bootstage_id ID of starting bootstage to use for progress updates.
707 * This will be added to the BOOTSTAGE_SUB values when
708 * calling bootstage_mark()
709 * @param load_op Decribes what to do with the load address
710 * @param datap Returns address of loaded image
711 * @param lenp Returns length of loaded image
712 * @return node offset of image, or -ve error code on error
713 */
714 int fit_image_load(bootm_headers_t *images, ulong addr,
715 const char **fit_unamep, const char **fit_uname_configp,
716 int arch, int image_type, int bootstage_id,
717 enum fit_load_op load_op, ulong *datap, ulong *lenp);
718
719 /**
720 * image_source_script() - Execute a script
721 *
722 * Executes a U-Boot script at a particular address in memory. The script should
723 * have a header (FIT or legacy) with the script type (IH_TYPE_SCRIPT).
724 *
725 * @addr: Address of script
726 * @fit_uname: FIT subimage name
727 * @return result code (enum command_ret_t)
728 */
729 int image_source_script(ulong addr, const char *fit_uname);
730
731 #ifndef USE_HOSTCC
732 /**
733 * fit_get_node_from_config() - Look up an image a FIT by type
734 *
735 * This looks in the selected conf- node (images->fit_uname_cfg) for a
736 * particular image type (e.g. "kernel") and then finds the image that is
737 * referred to.
738 *
739 * For example, for something like:
740 *
741 * images {
742 * kernel {
743 * ...
744 * };
745 * };
746 * configurations {
747 * conf-1 {
748 * kernel = "kernel";
749 * };
750 * };
751 *
752 * the function will return the node offset of the kernel@1 node, assuming
753 * that conf-1 is the chosen configuration.
754 *
755 * @param images Boot images structure
756 * @param prop_name Property name to look up (FIT_..._PROP)
757 * @param addr Address of FIT in memory
758 */
759 int fit_get_node_from_config(bootm_headers_t *images, const char *prop_name,
760 ulong addr);
761
762 int boot_get_fdt(int flag, int argc, char *const argv[], uint8_t arch,
763 bootm_headers_t *images,
764 char **of_flat_tree, ulong *of_size);
765 void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob);
766 int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size);
767
768 int boot_ramdisk_high(struct lmb *lmb, ulong rd_data, ulong rd_len,
769 ulong *initrd_start, ulong *initrd_end);
770 int boot_get_cmdline(struct lmb *lmb, ulong *cmd_start, ulong *cmd_end);
771 #ifdef CONFIG_SYS_BOOT_GET_KBD
772 int boot_get_kbd(struct lmb *lmb, struct bd_info **kbd);
773 #endif /* CONFIG_SYS_BOOT_GET_KBD */
774 #endif /* !USE_HOSTCC */
775
776 /*******************************************************************/
777 /* Legacy format specific code (prefixed with image_) */
778 /*******************************************************************/
image_get_header_size(void)779 static inline uint32_t image_get_header_size(void)
780 {
781 return (sizeof(image_header_t));
782 }
783
784 #define image_get_hdr_l(f) \
785 static inline uint32_t image_get_##f(const image_header_t *hdr) \
786 { \
787 return uimage_to_cpu(hdr->ih_##f); \
788 }
789 image_get_hdr_l(magic) /* image_get_magic */
image_get_hdr_l(hcrc)790 image_get_hdr_l(hcrc) /* image_get_hcrc */
791 image_get_hdr_l(time) /* image_get_time */
792 image_get_hdr_l(size) /* image_get_size */
793 image_get_hdr_l(load) /* image_get_load */
794 image_get_hdr_l(ep) /* image_get_ep */
795 image_get_hdr_l(dcrc) /* image_get_dcrc */
796
797 #define image_get_hdr_b(f) \
798 static inline uint8_t image_get_##f(const image_header_t *hdr) \
799 { \
800 return hdr->ih_##f; \
801 }
802 image_get_hdr_b(os) /* image_get_os */
803 image_get_hdr_b(arch) /* image_get_arch */
804 image_get_hdr_b(type) /* image_get_type */
805 image_get_hdr_b(comp) /* image_get_comp */
806
807 static inline char *image_get_name(const image_header_t *hdr)
808 {
809 return (char *)hdr->ih_name;
810 }
811
image_get_data_size(const image_header_t * hdr)812 static inline uint32_t image_get_data_size(const image_header_t *hdr)
813 {
814 return image_get_size(hdr);
815 }
816
817 /**
818 * image_get_data - get image payload start address
819 * @hdr: image header
820 *
821 * image_get_data() returns address of the image payload. For single
822 * component images it is image data start. For multi component
823 * images it points to the null terminated table of sub-images sizes.
824 *
825 * returns:
826 * image payload data start address
827 */
image_get_data(const image_header_t * hdr)828 static inline ulong image_get_data(const image_header_t *hdr)
829 {
830 return ((ulong)hdr + image_get_header_size());
831 }
832
image_get_image_size(const image_header_t * hdr)833 static inline uint32_t image_get_image_size(const image_header_t *hdr)
834 {
835 return (image_get_size(hdr) + image_get_header_size());
836 }
image_get_image_end(const image_header_t * hdr)837 static inline ulong image_get_image_end(const image_header_t *hdr)
838 {
839 return ((ulong)hdr + image_get_image_size(hdr));
840 }
841
842 #define image_set_hdr_l(f) \
843 static inline void image_set_##f(image_header_t *hdr, uint32_t val) \
844 { \
845 hdr->ih_##f = cpu_to_uimage(val); \
846 }
847 image_set_hdr_l(magic) /* image_set_magic */
image_set_hdr_l(hcrc)848 image_set_hdr_l(hcrc) /* image_set_hcrc */
849 image_set_hdr_l(time) /* image_set_time */
850 image_set_hdr_l(size) /* image_set_size */
851 image_set_hdr_l(load) /* image_set_load */
852 image_set_hdr_l(ep) /* image_set_ep */
853 image_set_hdr_l(dcrc) /* image_set_dcrc */
854
855 #define image_set_hdr_b(f) \
856 static inline void image_set_##f(image_header_t *hdr, uint8_t val) \
857 { \
858 hdr->ih_##f = val; \
859 }
860 image_set_hdr_b(os) /* image_set_os */
861 image_set_hdr_b(arch) /* image_set_arch */
862 image_set_hdr_b(type) /* image_set_type */
863 image_set_hdr_b(comp) /* image_set_comp */
864
865 static inline void image_set_name(image_header_t *hdr, const char *name)
866 {
867 strncpy(image_get_name(hdr), name, IH_NMLEN);
868 }
869
870 int image_check_hcrc(const image_header_t *hdr);
871 int image_check_dcrc(const image_header_t *hdr);
872 #ifndef USE_HOSTCC
873 ulong env_get_bootm_low(void);
874 phys_size_t env_get_bootm_size(void);
875 phys_size_t env_get_bootm_mapsize(void);
876 #endif
877 void memmove_wd(void *to, void *from, size_t len, ulong chunksz);
878
image_check_magic(const image_header_t * hdr)879 static inline int image_check_magic(const image_header_t *hdr)
880 {
881 return (image_get_magic(hdr) == IH_MAGIC);
882 }
image_check_type(const image_header_t * hdr,uint8_t type)883 static inline int image_check_type(const image_header_t *hdr, uint8_t type)
884 {
885 return (image_get_type(hdr) == type);
886 }
image_check_arch(const image_header_t * hdr,uint8_t arch)887 static inline int image_check_arch(const image_header_t *hdr, uint8_t arch)
888 {
889 return (image_get_arch(hdr) == arch) ||
890 (image_get_arch(hdr) == IH_ARCH_ARM && arch == IH_ARCH_ARM64);
891 }
image_check_os(const image_header_t * hdr,uint8_t os)892 static inline int image_check_os(const image_header_t *hdr, uint8_t os)
893 {
894 return (image_get_os(hdr) == os);
895 }
896
897 ulong image_multi_count(const image_header_t *hdr);
898 void image_multi_getimg(const image_header_t *hdr, ulong idx,
899 ulong *data, ulong *len);
900
901 void image_print_contents(const void *hdr);
902
903 #ifndef USE_HOSTCC
image_check_target_arch(const image_header_t * hdr)904 static inline int image_check_target_arch(const image_header_t *hdr)
905 {
906 #ifndef IH_ARCH_DEFAULT
907 # error "please define IH_ARCH_DEFAULT in your arch asm/u-boot.h"
908 #endif
909 return image_check_arch(hdr, IH_ARCH_DEFAULT);
910 }
911 #endif /* USE_HOSTCC */
912
913 /**
914 * image_decomp_type() - Find out compression type of an image
915 *
916 * @buf: Address in U-Boot memory where image is loaded.
917 * @len: Length of the compressed image.
918 * @return compression type or IH_COMP_NONE if not compressed.
919 *
920 * Note: Only following compression types are supported now.
921 * lzo, lzma, gzip, bzip2
922 */
923 int image_decomp_type(const unsigned char *buf, ulong len);
924
925 /**
926 * image_decomp() - decompress an image
927 *
928 * @comp: Compression algorithm that is used (IH_COMP_...)
929 * @load: Destination load address in U-Boot memory
930 * @image_start Image start address (where we are decompressing from)
931 * @type: OS type (IH_OS_...)
932 * @load_bug: Place to decompress to
933 * @image_buf: Address to decompress from
934 * @image_len: Number of bytes in @image_buf to decompress
935 * @unc_len: Available space for decompression
936 * @return 0 if OK, -ve on error (BOOTM_ERR_...)
937 */
938 int image_decomp(int comp, ulong load, ulong image_start, int type,
939 void *load_buf, void *image_buf, ulong image_len,
940 uint unc_len, ulong *load_end);
941
942 /**
943 * Set up properties in the FDT
944 *
945 * This sets up properties in the FDT that is to be passed to linux.
946 *
947 * @images: Images information
948 * @blob: FDT to update
949 * @of_size: Size of the FDT
950 * @lmb: Points to logical memory block structure
951 * @return 0 if ok, <0 on failure
952 */
953 int image_setup_libfdt(bootm_headers_t *images, void *blob,
954 int of_size, struct lmb *lmb);
955
956 /**
957 * Set up the FDT to use for booting a kernel
958 *
959 * This performs ramdisk setup, sets up the FDT if required, and adds
960 * paramters to the FDT if libfdt is available.
961 *
962 * @param images Images information
963 * @return 0 if ok, <0 on failure
964 */
965 int image_setup_linux(bootm_headers_t *images);
966
967 /**
968 * bootz_setup() - Extract stat and size of a Linux xImage
969 *
970 * @image: Address of image
971 * @start: Returns start address of image
972 * @end : Returns end address of image
973 * @return 0 if OK, 1 if the image was not recognised
974 */
975 int bootz_setup(ulong image, ulong *start, ulong *end);
976
977 /**
978 * Return the correct start address and size of a Linux aarch64 Image.
979 *
980 * @image: Address of image
981 * @start: Returns start address of image
982 * @size : Returns size image
983 * @force_reloc: Ignore image->ep field, always place image to RAM start
984 * @return 0 if OK, 1 if the image was not recognised
985 */
986 int booti_setup(ulong image, ulong *relocated_addr, ulong *size,
987 bool force_reloc);
988
989 /*******************************************************************/
990 /* New uImage format specific code (prefixed with fit_) */
991 /*******************************************************************/
992
993 #define FIT_IMAGES_PATH "/images"
994 #define FIT_CONFS_PATH "/configurations"
995
996 /* hash/signature/key node */
997 #define FIT_HASH_NODENAME "hash"
998 #define FIT_ALGO_PROP "algo"
999 #define FIT_VALUE_PROP "value"
1000 #define FIT_IGNORE_PROP "uboot-ignore"
1001 #define FIT_SIG_NODENAME "signature"
1002 #define FIT_KEY_REQUIRED "required"
1003 #define FIT_KEY_HINT "key-name-hint"
1004
1005 /* cipher node */
1006 #define FIT_CIPHER_NODENAME "cipher"
1007 #define FIT_ALGO_PROP "algo"
1008
1009 /* image node */
1010 #define FIT_DATA_PROP "data"
1011 #define FIT_DATA_POSITION_PROP "data-position"
1012 #define FIT_DATA_OFFSET_PROP "data-offset"
1013 #define FIT_DATA_SIZE_PROP "data-size"
1014 #define FIT_TIMESTAMP_PROP "timestamp"
1015 #define FIT_DESC_PROP "description"
1016 #define FIT_ARCH_PROP "arch"
1017 #define FIT_TYPE_PROP "type"
1018 #define FIT_OS_PROP "os"
1019 #define FIT_COMP_PROP "compression"
1020 #define FIT_ENTRY_PROP "entry"
1021 #define FIT_LOAD_PROP "load"
1022
1023 /* configuration node */
1024 #define FIT_KERNEL_PROP "kernel"
1025 #define FIT_RAMDISK_PROP "ramdisk"
1026 #define FIT_FDT_PROP "fdt"
1027 #define FIT_LOADABLE_PROP "loadables"
1028 #define FIT_DEFAULT_PROP "default"
1029 #define FIT_SETUP_PROP "setup"
1030 #define FIT_FPGA_PROP "fpga"
1031 #define FIT_FIRMWARE_PROP "firmware"
1032 #define FIT_STANDALONE_PROP "standalone"
1033
1034 #define FIT_MAX_HASH_LEN HASH_MAX_DIGEST_SIZE
1035
1036 #if IMAGE_ENABLE_FIT
1037 /* cmdline argument format parsing */
1038 int fit_parse_conf(const char *spec, ulong addr_curr,
1039 ulong *addr, const char **conf_name);
1040 int fit_parse_subimage(const char *spec, ulong addr_curr,
1041 ulong *addr, const char **image_name);
1042
1043 int fit_get_subimage_count(const void *fit, int images_noffset);
1044 void fit_print_contents(const void *fit);
1045 void fit_image_print(const void *fit, int noffset, const char *p);
1046
1047 /**
1048 * fit_get_end - get FIT image size
1049 * @fit: pointer to the FIT format image header
1050 *
1051 * returns:
1052 * size of the FIT image (blob) in memory
1053 */
fit_get_size(const void * fit)1054 static inline ulong fit_get_size(const void *fit)
1055 {
1056 return fdt_totalsize(fit);
1057 }
1058
1059 /**
1060 * fit_get_end - get FIT image end
1061 * @fit: pointer to the FIT format image header
1062 *
1063 * returns:
1064 * end address of the FIT image (blob) in memory
1065 */
1066 ulong fit_get_end(const void *fit);
1067
1068 /**
1069 * fit_get_name - get FIT node name
1070 * @fit: pointer to the FIT format image header
1071 *
1072 * returns:
1073 * NULL, on error
1074 * pointer to node name, on success
1075 */
fit_get_name(const void * fit_hdr,int noffset,int * len)1076 static inline const char *fit_get_name(const void *fit_hdr,
1077 int noffset, int *len)
1078 {
1079 return fdt_get_name(fit_hdr, noffset, len);
1080 }
1081
1082 int fit_get_desc(const void *fit, int noffset, char **desc);
1083 int fit_get_timestamp(const void *fit, int noffset, time_t *timestamp);
1084
1085 int fit_image_get_node(const void *fit, const char *image_uname);
1086 int fit_image_get_os(const void *fit, int noffset, uint8_t *os);
1087 int fit_image_get_arch(const void *fit, int noffset, uint8_t *arch);
1088 int fit_image_get_type(const void *fit, int noffset, uint8_t *type);
1089 int fit_image_get_comp(const void *fit, int noffset, uint8_t *comp);
1090 int fit_image_get_load(const void *fit, int noffset, ulong *load);
1091 int fit_image_get_entry(const void *fit, int noffset, ulong *entry);
1092 int fit_image_get_data(const void *fit, int noffset,
1093 const void **data, size_t *size);
1094 int fit_image_get_data_offset(const void *fit, int noffset, int *data_offset);
1095 int fit_image_get_data_position(const void *fit, int noffset,
1096 int *data_position);
1097 int fit_image_get_data_size(const void *fit, int noffset, int *data_size);
1098 int fit_image_get_data_size_unciphered(const void *fit, int noffset,
1099 size_t *data_size);
1100 int fit_image_get_data_and_size(const void *fit, int noffset,
1101 const void **data, size_t *size);
1102
1103 int fit_image_hash_get_algo(const void *fit, int noffset, char **algo);
1104 int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value,
1105 int *value_len);
1106
1107 int fit_set_timestamp(void *fit, int noffset, time_t timestamp);
1108
1109 int fit_cipher_data(const char *keydir, void *keydest, void *fit,
1110 const char *comment, int require_keys,
1111 const char *engine_id, const char *cmdname);
1112
1113 /**
1114 * fit_add_verification_data() - add verification data to FIT image nodes
1115 *
1116 * @keydir: Directory containing keys
1117 * @kwydest: FDT blob to write public key information to
1118 * @fit: Pointer to the FIT format image header
1119 * @comment: Comment to add to signature nodes
1120 * @require_keys: Mark all keys as 'required'
1121 * @engine_id: Engine to use for signing
1122 * @cmdname: Command name used when reporting errors
1123 *
1124 * Adds hash values for all component images in the FIT blob.
1125 * Hashes are calculated for all component images which have hash subnodes
1126 * with algorithm property set to one of the supported hash algorithms.
1127 *
1128 * Also add signatures if signature nodes are present.
1129 *
1130 * returns
1131 * 0, on success
1132 * libfdt error code, on failure
1133 */
1134 int fit_add_verification_data(const char *keydir, void *keydest, void *fit,
1135 const char *comment, int require_keys,
1136 const char *engine_id, const char *cmdname);
1137
1138 int fit_image_verify_with_data(const void *fit, int image_noffset,
1139 const void *data, size_t size);
1140 int fit_image_verify(const void *fit, int noffset);
1141 int fit_config_verify(const void *fit, int conf_noffset);
1142 int fit_all_image_verify(const void *fit);
1143 int fit_config_decrypt(const void *fit, int conf_noffset);
1144 int fit_image_check_os(const void *fit, int noffset, uint8_t os);
1145 int fit_image_check_arch(const void *fit, int noffset, uint8_t arch);
1146 int fit_image_check_type(const void *fit, int noffset, uint8_t type);
1147 int fit_image_check_comp(const void *fit, int noffset, uint8_t comp);
1148
1149 /**
1150 * fit_check_format() - Check that the FIT is valid
1151 *
1152 * This performs various checks on the FIT to make sure it is suitable for
1153 * use, looking for mandatory properties, nodes, etc.
1154 *
1155 * If FIT_FULL_CHECK is enabled, it also runs it through libfdt to make
1156 * sure that there are no strange tags or broken nodes in the FIT.
1157 *
1158 * @fit: pointer to the FIT format image header
1159 * @return 0 if OK, -ENOEXEC if not an FDT file, -EINVAL if the full FDT check
1160 * failed (e.g. due to bad structure), -ENOMSG if the description is
1161 * missing, -EBADMSG if the timestamp is missing, -ENOENT if the /images
1162 * path is missing
1163 */
1164 int fit_check_format(const void *fit, ulong size);
1165
1166 int fit_conf_find_compat(const void *fit, const void *fdt);
1167
1168 /**
1169 * fit_conf_get_node - get node offset for configuration of a given unit name
1170 * @fit: pointer to the FIT format image header
1171 * @conf_uname: configuration node unit name (NULL to use default)
1172 *
1173 * fit_conf_get_node() finds a configuration (within the '/configurations'
1174 * parent node) of a provided unit name. If configuration is found its node
1175 * offset is returned to the caller.
1176 *
1177 * When NULL is provided in second argument fit_conf_get_node() will search
1178 * for a default configuration node instead. Default configuration node unit
1179 * name is retrieved from FIT_DEFAULT_PROP property of the '/configurations'
1180 * node.
1181 *
1182 * returns:
1183 * configuration node offset when found (>=0)
1184 * negative number on failure (FDT_ERR_* code)
1185 */
1186 int fit_conf_get_node(const void *fit, const char *conf_uname);
1187
1188 int fit_conf_get_prop_node_count(const void *fit, int noffset,
1189 const char *prop_name);
1190 int fit_conf_get_prop_node_index(const void *fit, int noffset,
1191 const char *prop_name, int index);
1192
1193 /**
1194 * fit_conf_get_prop_node() - Get node refered to by a configuration
1195 * @fit: FIT to check
1196 * @noffset: Offset of conf@xxx node to check
1197 * @prop_name: Property to read from the conf node
1198 *
1199 * The conf- nodes contain references to other nodes, using properties
1200 * like 'kernel = "kernel"'. Given such a property name (e.g. "kernel"),
1201 * return the offset of the node referred to (e.g. offset of node
1202 * "/images/kernel".
1203 */
1204 int fit_conf_get_prop_node(const void *fit, int noffset,
1205 const char *prop_name);
1206
1207 int fit_check_ramdisk(const void *fit, int os_noffset,
1208 uint8_t arch, int verify);
1209 #endif /* IMAGE_ENABLE_FIT */
1210
1211 int calculate_hash(const void *data, int data_len, const char *algo,
1212 uint8_t *value, int *value_len);
1213
1214 /*
1215 * At present we only support signing on the host, and verification on the
1216 * device
1217 */
1218 #if defined(USE_HOSTCC)
1219 # if defined(CONFIG_FIT_SIGNATURE)
1220 # define IMAGE_ENABLE_SIGN 1
1221 # define IMAGE_ENABLE_VERIFY 1
1222 # define FIT_IMAGE_ENABLE_VERIFY 1
1223 # include <openssl/evp.h>
1224 # else
1225 # define IMAGE_ENABLE_SIGN 0
1226 # define IMAGE_ENABLE_VERIFY 0
1227 # define FIT_IMAGE_ENABLE_VERIFY 0
1228 # endif
1229 #else
1230 # define IMAGE_ENABLE_SIGN 0
1231 # define IMAGE_ENABLE_VERIFY CONFIG_IS_ENABLED(RSA_VERIFY)
1232 # define FIT_IMAGE_ENABLE_VERIFY CONFIG_IS_ENABLED(FIT_SIGNATURE)
1233 #endif
1234
1235 #if IMAGE_ENABLE_FIT
1236 #ifdef USE_HOSTCC
1237 void *image_get_host_blob(void);
1238 void image_set_host_blob(void *host_blob);
1239 # define gd_fdt_blob() image_get_host_blob()
1240 #else
1241 # define gd_fdt_blob() (gd->fdt_blob)
1242 #endif
1243
1244 #ifdef CONFIG_FIT_BEST_MATCH
1245 #define IMAGE_ENABLE_BEST_MATCH 1
1246 #else
1247 #define IMAGE_ENABLE_BEST_MATCH 0
1248 #endif
1249 #endif /* IMAGE_ENABLE_FIT */
1250
1251 /* Information passed to the signing routines */
1252 struct image_sign_info {
1253 const char *keydir; /* Directory conaining keys */
1254 const char *keyname; /* Name of key to use */
1255 void *fit; /* Pointer to FIT blob */
1256 int node_offset; /* Offset of signature node */
1257 const char *name; /* Algorithm name */
1258 struct checksum_algo *checksum; /* Checksum algorithm information */
1259 struct padding_algo *padding; /* Padding algorithm information */
1260 struct crypto_algo *crypto; /* Crypto algorithm information */
1261 const void *fdt_blob; /* FDT containing public keys */
1262 int required_keynode; /* Node offset of key to use: -1=any */
1263 const char *require_keys; /* Value for 'required' property */
1264 const char *engine_id; /* Engine to use for signing */
1265 /*
1266 * Note: the following two fields are always valid even w/o
1267 * RSA_VERIFY_WITH_PKEY in order to make sure this structure is
1268 * the same on target and host. Otherwise, vboot test may fail.
1269 */
1270 const void *key; /* Pointer to public key in DER */
1271 int keylen; /* Length of public key */
1272 };
1273
1274 /* A part of an image, used for hashing */
1275 struct image_region {
1276 const void *data;
1277 int size;
1278 };
1279
1280 #if IMAGE_ENABLE_VERIFY
1281 # include <u-boot/rsa-checksum.h>
1282 #endif
1283 struct checksum_algo {
1284 const char *name;
1285 const int checksum_len;
1286 const int der_len;
1287 const uint8_t *der_prefix;
1288 #if IMAGE_ENABLE_SIGN
1289 const EVP_MD *(*calculate_sign)(void);
1290 #endif
1291 int (*calculate)(const char *name,
1292 const struct image_region region[],
1293 int region_count, uint8_t *checksum);
1294 };
1295
1296 struct crypto_algo {
1297 const char *name; /* Name of algorithm */
1298 const int key_len;
1299
1300 /**
1301 * sign() - calculate and return signature for given input data
1302 *
1303 * @info: Specifies key and FIT information
1304 * @data: Pointer to the input data
1305 * @data_len: Data length
1306 * @sigp: Set to an allocated buffer holding the signature
1307 * @sig_len: Set to length of the calculated hash
1308 *
1309 * This computes input data signature according to selected algorithm.
1310 * Resulting signature value is placed in an allocated buffer, the
1311 * pointer is returned as *sigp. The length of the calculated
1312 * signature is returned via the sig_len pointer argument. The caller
1313 * should free *sigp.
1314 *
1315 * @return: 0, on success, -ve on error
1316 */
1317 int (*sign)(struct image_sign_info *info,
1318 const struct image_region region[],
1319 int region_count, uint8_t **sigp, uint *sig_len);
1320
1321 /**
1322 * add_verify_data() - Add verification information to FDT
1323 *
1324 * Add public key information to the FDT node, suitable for
1325 * verification at run-time. The information added depends on the
1326 * algorithm being used.
1327 *
1328 * @info: Specifies key and FIT information
1329 * @keydest: Destination FDT blob for public key data
1330 * @return: 0, on success, -ve on error
1331 */
1332 int (*add_verify_data)(struct image_sign_info *info, void *keydest);
1333
1334 /**
1335 * verify() - Verify a signature against some data
1336 *
1337 * @info: Specifies key and FIT information
1338 * @data: Pointer to the input data
1339 * @data_len: Data length
1340 * @sig: Signature
1341 * @sig_len: Number of bytes in signature
1342 * @return 0 if verified, -ve on error
1343 */
1344 int (*verify)(struct image_sign_info *info,
1345 const struct image_region region[], int region_count,
1346 uint8_t *sig, uint sig_len);
1347 };
1348
1349 struct padding_algo {
1350 const char *name;
1351 int (*verify)(struct image_sign_info *info,
1352 uint8_t *pad, int pad_len,
1353 const uint8_t *hash, int hash_len);
1354 };
1355
1356 /**
1357 * image_get_checksum_algo() - Look up a checksum algorithm
1358 *
1359 * @param full_name Name of algorithm in the form "checksum,crypto"
1360 * @return pointer to algorithm information, or NULL if not found
1361 */
1362 struct checksum_algo *image_get_checksum_algo(const char *full_name);
1363
1364 /**
1365 * image_get_crypto_algo() - Look up a cryptosystem algorithm
1366 *
1367 * @param full_name Name of algorithm in the form "checksum,crypto"
1368 * @return pointer to algorithm information, or NULL if not found
1369 */
1370 struct crypto_algo *image_get_crypto_algo(const char *full_name);
1371
1372 /**
1373 * image_get_padding_algo() - Look up a padding algorithm
1374 *
1375 * @param name Name of padding algorithm
1376 * @return pointer to algorithm information, or NULL if not found
1377 */
1378 struct padding_algo *image_get_padding_algo(const char *name);
1379
1380 #if IMAGE_ENABLE_FIT
1381
1382 /**
1383 * fit_image_verify_required_sigs() - Verify signatures marked as 'required'
1384 *
1385 * @fit: FIT to check
1386 * @image_noffset: Offset of image node to check
1387 * @data: Image data to check
1388 * @size: Size of image data
1389 * @sig_blob: FDT containing public keys
1390 * @no_sigsp: Returns 1 if no signatures were required, and
1391 * therefore nothing was checked. The caller may wish
1392 * to fall back to other mechanisms, or refuse to
1393 * boot.
1394 * @return 0 if all verified ok, <0 on error
1395 */
1396 int fit_image_verify_required_sigs(const void *fit, int image_noffset,
1397 const char *data, size_t size, const void *sig_blob,
1398 int *no_sigsp);
1399
1400 /**
1401 * fit_image_check_sig() - Check a single image signature node
1402 *
1403 * @fit: FIT to check
1404 * @noffset: Offset of signature node to check
1405 * @data: Image data to check
1406 * @size: Size of image data
1407 * @required_keynode: Offset in the control FDT of the required key node,
1408 * if any. If this is given, then the image wil not
1409 * pass verification unless that key is used. If this is
1410 * -1 then any signature will do.
1411 * @err_msgp: In the event of an error, this will be pointed to a
1412 * help error string to display to the user.
1413 * @return 0 if all verified ok, <0 on error
1414 */
1415 int fit_image_check_sig(const void *fit, int noffset, const void *data,
1416 size_t size, int required_keynode, char **err_msgp);
1417
1418 int fit_image_decrypt_data(const void *fit,
1419 int image_noffset, int cipher_noffset,
1420 const void *data, size_t size,
1421 void **data_unciphered, size_t *size_unciphered);
1422
1423 /**
1424 * fit_region_make_list() - Make a list of regions to hash
1425 *
1426 * Given a list of FIT regions (offset, size) provided by libfdt, create
1427 * a list of regions (void *, size) for use by the signature creationg
1428 * and verification code.
1429 *
1430 * @fit: FIT image to process
1431 * @fdt_regions: Regions as returned by libfdt
1432 * @count: Number of regions returned by libfdt
1433 * @region: Place to put list of regions (NULL to allocate it)
1434 * @return pointer to list of regions, or NULL if out of memory
1435 */
1436 struct image_region *fit_region_make_list(const void *fit,
1437 struct fdt_region *fdt_regions, int count,
1438 struct image_region *region);
1439
fit_image_check_target_arch(const void * fdt,int node)1440 static inline int fit_image_check_target_arch(const void *fdt, int node)
1441 {
1442 #ifndef USE_HOSTCC
1443 return fit_image_check_arch(fdt, node, IH_ARCH_DEFAULT);
1444 #else
1445 return 0;
1446 #endif
1447 }
1448
1449 /*
1450 * At present we only support ciphering on the host, and unciphering on the
1451 * device
1452 */
1453 #if defined(USE_HOSTCC)
1454 # if defined(CONFIG_FIT_CIPHER)
1455 # define IMAGE_ENABLE_ENCRYPT 1
1456 # define IMAGE_ENABLE_DECRYPT 1
1457 # include <openssl/evp.h>
1458 # else
1459 # define IMAGE_ENABLE_ENCRYPT 0
1460 # define IMAGE_ENABLE_DECRYPT 0
1461 # endif
1462 #else
1463 # define IMAGE_ENABLE_ENCRYPT 0
1464 # define IMAGE_ENABLE_DECRYPT CONFIG_IS_ENABLED(FIT_CIPHER)
1465 #endif
1466
1467 /* Information passed to the ciphering routines */
1468 struct image_cipher_info {
1469 const char *keydir; /* Directory containing keys */
1470 const char *keyname; /* Name of key to use */
1471 const char *ivname; /* Name of IV to use */
1472 const void *fit; /* Pointer to FIT blob */
1473 int node_noffset; /* Offset of the cipher node */
1474 const char *name; /* Algorithm name */
1475 struct cipher_algo *cipher; /* Cipher algorithm information */
1476 const void *fdt_blob; /* FDT containing key and IV */
1477 const void *key; /* Value of the key */
1478 const void *iv; /* Value of the IV */
1479 size_t size_unciphered; /* Size of the unciphered data */
1480 };
1481
1482 struct cipher_algo {
1483 const char *name; /* Name of algorithm */
1484 int key_len; /* Length of the key */
1485 int iv_len; /* Length of the IV */
1486
1487 #if IMAGE_ENABLE_ENCRYPT
1488 const EVP_CIPHER * (*calculate_type)(void);
1489 #endif
1490
1491 int (*encrypt)(struct image_cipher_info *info,
1492 const unsigned char *data, int data_len,
1493 unsigned char **cipher, int *cipher_len);
1494
1495 int (*add_cipher_data)(struct image_cipher_info *info,
1496 void *keydest, void *fit, int node_noffset);
1497
1498 int (*decrypt)(struct image_cipher_info *info,
1499 const void *cipher, size_t cipher_len,
1500 void **data, size_t *data_len);
1501 };
1502
1503 int fit_image_cipher_get_algo(const void *fit, int noffset, char **algo);
1504
1505 struct cipher_algo *image_get_cipher_algo(const char *full_name);
1506
1507 #ifdef CONFIG_FIT_VERBOSE
1508 #define fit_unsupported(msg) printf("! %s:%d " \
1509 "FIT images not supported for '%s'\n", \
1510 __FILE__, __LINE__, (msg))
1511
1512 #define fit_unsupported_reset(msg) printf("! %s:%d " \
1513 "FIT images not supported for '%s' " \
1514 "- must reset board to recover!\n", \
1515 __FILE__, __LINE__, (msg))
1516 #else
1517 #define fit_unsupported(msg)
1518 #define fit_unsupported_reset(msg)
1519 #endif /* CONFIG_FIT_VERBOSE */
1520 #endif /* CONFIG_FIT */
1521
1522 #if !defined(USE_HOSTCC)
1523 #if defined(CONFIG_ANDROID_BOOT_IMAGE)
1524 struct andr_img_hdr;
1525 int android_image_check_header(const struct andr_img_hdr *hdr);
1526 int android_image_get_kernel(const struct andr_img_hdr *hdr, int verify,
1527 ulong *os_data, ulong *os_len);
1528 int android_image_get_ramdisk(const struct andr_img_hdr *hdr,
1529 ulong *rd_data, ulong *rd_len);
1530 int android_image_get_second(const struct andr_img_hdr *hdr,
1531 ulong *second_data, ulong *second_len);
1532 bool android_image_get_dtbo(ulong hdr_addr, ulong *addr, u32 *size);
1533 bool android_image_get_dtb_by_index(ulong hdr_addr, u32 index, ulong *addr,
1534 u32 *size);
1535 ulong android_image_get_end(const struct andr_img_hdr *hdr);
1536 ulong android_image_get_kload(const struct andr_img_hdr *hdr);
1537 ulong android_image_get_kcomp(const struct andr_img_hdr *hdr);
1538 void android_print_contents(const struct andr_img_hdr *hdr);
1539 #if !defined(CONFIG_SPL_BUILD)
1540 bool android_image_print_dtb_contents(ulong hdr_addr);
1541 #endif
1542
1543 #endif /* CONFIG_ANDROID_BOOT_IMAGE */
1544 #endif /* !USE_HOSTCC */
1545
1546 /**
1547 * board_fit_config_name_match() - Check for a matching board name
1548 *
1549 * This is used when SPL loads a FIT containing multiple device tree files
1550 * and wants to work out which one to use. The description of each one is
1551 * passed to this function. The description comes from the 'description' field
1552 * in each (FDT) image node.
1553 *
1554 * @name: Device tree description
1555 * @return 0 if this device tree should be used, non-zero to try the next
1556 */
1557 int board_fit_config_name_match(const char *name);
1558
1559 /**
1560 * board_fit_image_post_process() - Do any post-process on FIT binary data
1561 *
1562 * This is used to do any sort of image manipulation, verification, decryption
1563 * etc. in a platform or board specific way. Obviously, anything done here would
1564 * need to be comprehended in how the images were prepared before being injected
1565 * into the FIT creation (i.e. the binary blobs would have been pre-processed
1566 * before being added to the FIT image).
1567 *
1568 * @image: pointer to the image start pointer
1569 * @size: pointer to the image size
1570 * @return no return value (failure should be handled internally)
1571 */
1572 void board_fit_image_post_process(void **p_image, size_t *p_size);
1573
1574 #define FDT_ERROR ((ulong)(-1))
1575
1576 ulong fdt_getprop_u32(const void *fdt, int node, const char *prop);
1577
1578 /**
1579 * fit_find_config_node() - Find the node for the best DTB in a FIT image
1580 *
1581 * A FIT image contains one or more DTBs. This function parses the
1582 * configurations described in the FIT images and returns the node of
1583 * the first matching DTB. To check if a DTB matches a board, this function
1584 * calls board_fit_config_name_match(). If no matching DTB is found, it returns
1585 * the node described by the default configuration if it exists.
1586 *
1587 * @fdt: pointer to flat device tree
1588 * @return the node if found, -ve otherwise
1589 */
1590 int fit_find_config_node(const void *fdt);
1591
1592 /**
1593 * Mapping of image types to function handlers to be invoked on the associated
1594 * loaded images
1595 *
1596 * @type: Type of image, I.E. IH_TYPE_*
1597 * @handler: Function to call on loaded image
1598 */
1599 struct fit_loadable_tbl {
1600 int type;
1601 /**
1602 * handler() - Process a loaded image
1603 *
1604 * @data: Pointer to start of loaded image data
1605 * @size: Size of loaded image data
1606 */
1607 void (*handler)(ulong data, size_t size);
1608 };
1609
1610 /*
1611 * Define a FIT loadable image type handler
1612 *
1613 * _type is a valid uimage_type ID as defined in the "Image Type" enum above
1614 * _handler is the handler function to call after this image type is loaded
1615 */
1616 #define U_BOOT_FIT_LOADABLE_HANDLER(_type, _handler) \
1617 ll_entry_declare(struct fit_loadable_tbl, _function, fit_loadable) = { \
1618 .type = _type, \
1619 .handler = _handler, \
1620 }
1621
1622 /**
1623 * fit_update - update storage with FIT image
1624 * @fit: Pointer to FIT image
1625 *
1626 * Update firmware on storage using FIT image as input.
1627 * The storage area to be update will be identified by the name
1628 * in FIT and matching it to "dfu_alt_info" variable.
1629 *
1630 * Return: 0 on success, non-zero otherwise
1631 */
1632 int fit_update(const void *fit);
1633
1634 #endif /* __IMAGE_H__ */
1635