1 /*
2 * IEEE 1284.3 Parallel port daisy chain and multiplexor code
3 *
4 * Copyright (C) 1999, 2000 Tim Waugh <tim@cyberelk.demon.co.uk>
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
10 *
11 * ??-12-1998: Initial implementation.
12 * 31-01-1999: Make port-cloning transparent.
13 * 13-02-1999: Move DeviceID technique from parport_probe.
14 * 13-03-1999: Get DeviceID from non-IEEE 1284.3 devices too.
15 * 22-02-2000: Count devices that are actually detected.
16 *
17 * Any part of this program may be used in documents licensed under
18 * the GNU Free Documentation License, Version 1.1 or any later version
19 * published by the Free Software Foundation.
20 */
21
22 #include <linux/module.h>
23 #include <linux/parport.h>
24 #include <linux/delay.h>
25 #include <linux/slab.h>
26 #include <linux/sched/signal.h>
27
28 #include <asm/current.h>
29 #include <linux/uaccess.h>
30
31 #undef DEBUG
32
33 static struct daisydev {
34 struct daisydev *next;
35 struct parport *port;
36 int daisy;
37 int devnum;
38 } *topology = NULL;
39 static DEFINE_SPINLOCK(topology_lock);
40
41 static int numdevs;
42 static bool daisy_init_done;
43
44 /* Forward-declaration of lower-level functions. */
45 static int mux_present(struct parport *port);
46 static int num_mux_ports(struct parport *port);
47 static int select_port(struct parport *port);
48 static int assign_addrs(struct parport *port);
49
50 /* Add a device to the discovered topology. */
add_dev(int devnum,struct parport * port,int daisy)51 static void add_dev(int devnum, struct parport *port, int daisy)
52 {
53 struct daisydev *newdev, **p;
54 newdev = kmalloc(sizeof(struct daisydev), GFP_KERNEL);
55 if (newdev) {
56 newdev->port = port;
57 newdev->daisy = daisy;
58 newdev->devnum = devnum;
59 spin_lock(&topology_lock);
60 for (p = &topology; *p && (*p)->devnum<devnum; p = &(*p)->next)
61 ;
62 newdev->next = *p;
63 *p = newdev;
64 spin_unlock(&topology_lock);
65 }
66 }
67
68 /* Clone a parport (actually, make an alias). */
clone_parport(struct parport * real,int muxport)69 static struct parport *clone_parport(struct parport *real, int muxport)
70 {
71 struct parport *extra = parport_register_port(real->base,
72 real->irq,
73 real->dma,
74 real->ops);
75 if (extra) {
76 extra->portnum = real->portnum;
77 extra->physport = real;
78 extra->muxport = muxport;
79 real->slaves[muxport-1] = extra;
80 }
81
82 return extra;
83 }
84
daisy_drv_probe(struct pardevice * par_dev)85 static int daisy_drv_probe(struct pardevice *par_dev)
86 {
87 struct device_driver *drv = par_dev->dev.driver;
88
89 if (strcmp(drv->name, "daisy_drv"))
90 return -ENODEV;
91 if (strcmp(par_dev->name, daisy_dev_name))
92 return -ENODEV;
93
94 return 0;
95 }
96
97 static struct parport_driver daisy_driver = {
98 .name = "daisy_drv",
99 .probe = daisy_drv_probe,
100 .devmodel = true,
101 };
102
103 /* Discover the IEEE1284.3 topology on a port -- muxes and daisy chains.
104 * Return value is number of devices actually detected. */
parport_daisy_init(struct parport * port)105 int parport_daisy_init(struct parport *port)
106 {
107 int detected = 0;
108 char *deviceid;
109 static const char *th[] = { /*0*/"th", "st", "nd", "rd", "th" };
110 int num_ports;
111 int i;
112 int last_try = 0;
113
114 if (!daisy_init_done) {
115 /*
116 * flag should be marked true first as
117 * parport_register_driver() might try to load the low
118 * level driver which will lead to announcing new ports
119 * and which will again come back here at
120 * parport_daisy_init()
121 */
122 daisy_init_done = true;
123 i = parport_register_driver(&daisy_driver);
124 if (i) {
125 pr_err("daisy registration failed\n");
126 daisy_init_done = false;
127 return i;
128 }
129 }
130
131 again:
132 /* Because this is called before any other devices exist,
133 * we don't have to claim exclusive access. */
134
135 /* If mux present on normal port, need to create new
136 * parports for each extra port. */
137 if (port->muxport < 0 && mux_present(port) &&
138 /* don't be fooled: a mux must have 2 or 4 ports. */
139 ((num_ports = num_mux_ports(port)) == 2 || num_ports == 4)) {
140 /* Leave original as port zero. */
141 port->muxport = 0;
142 pr_info("%s: 1st (default) port of %d-way multiplexor\n",
143 port->name, num_ports);
144 for (i = 1; i < num_ports; i++) {
145 /* Clone the port. */
146 struct parport *extra = clone_parport(port, i);
147 if (!extra) {
148 if (signal_pending(current))
149 break;
150
151 schedule();
152 continue;
153 }
154
155 pr_info("%s: %d%s port of %d-way multiplexor on %s\n",
156 extra->name, i + 1, th[i + 1], num_ports,
157 port->name);
158
159 /* Analyse that port too. We won't recurse
160 forever because of the 'port->muxport < 0'
161 test above. */
162 parport_daisy_init(extra);
163 }
164 }
165
166 if (port->muxport >= 0)
167 select_port(port);
168
169 parport_daisy_deselect_all(port);
170 detected += assign_addrs(port);
171
172 /* Count the potential legacy device at the end. */
173 add_dev(numdevs++, port, -1);
174
175 /* Find out the legacy device's IEEE 1284 device ID. */
176 deviceid = kmalloc(1024, GFP_KERNEL);
177 if (deviceid) {
178 if (parport_device_id(numdevs - 1, deviceid, 1024) > 2)
179 detected++;
180
181 kfree(deviceid);
182 }
183
184 if (!detected && !last_try) {
185 /* No devices were detected. Perhaps they are in some
186 funny state; let's try to reset them and see if
187 they wake up. */
188 parport_daisy_fini(port);
189 parport_write_control(port, PARPORT_CONTROL_SELECT);
190 udelay(50);
191 parport_write_control(port,
192 PARPORT_CONTROL_SELECT |
193 PARPORT_CONTROL_INIT);
194 udelay(50);
195 last_try = 1;
196 goto again;
197 }
198
199 return detected;
200 }
201
202 /* Forget about devices on a physical port. */
parport_daisy_fini(struct parport * port)203 void parport_daisy_fini(struct parport *port)
204 {
205 struct daisydev **p;
206
207 spin_lock(&topology_lock);
208 p = &topology;
209 while (*p) {
210 struct daisydev *dev = *p;
211 if (dev->port != port) {
212 p = &dev->next;
213 continue;
214 }
215 *p = dev->next;
216 kfree(dev);
217 }
218
219 /* Gaps in the numbering could be handled better. How should
220 someone enumerate through all IEEE1284.3 devices in the
221 topology?. */
222 if (!topology) numdevs = 0;
223 spin_unlock(&topology_lock);
224 return;
225 }
226
227 /**
228 * parport_open - find a device by canonical device number
229 * @devnum: canonical device number
230 * @name: name to associate with the device
231 *
232 * This function is similar to parport_register_device(), except
233 * that it locates a device by its number rather than by the port
234 * it is attached to.
235 *
236 * All parameters except for @devnum are the same as for
237 * parport_register_device(). The return value is the same as
238 * for parport_register_device().
239 **/
240
parport_open(int devnum,const char * name)241 struct pardevice *parport_open(int devnum, const char *name)
242 {
243 struct daisydev *p = topology;
244 struct pardev_cb par_cb;
245 struct parport *port;
246 struct pardevice *dev;
247 int daisy;
248
249 memset(&par_cb, 0, sizeof(par_cb));
250 spin_lock(&topology_lock);
251 while (p && p->devnum != devnum)
252 p = p->next;
253
254 if (!p) {
255 spin_unlock(&topology_lock);
256 return NULL;
257 }
258
259 daisy = p->daisy;
260 port = parport_get_port(p->port);
261 spin_unlock(&topology_lock);
262
263 dev = parport_register_dev_model(port, name, &par_cb, devnum);
264 parport_put_port(port);
265 if (!dev)
266 return NULL;
267
268 dev->daisy = daisy;
269
270 /* Check that there really is a device to select. */
271 if (daisy >= 0) {
272 int selected;
273 parport_claim_or_block(dev);
274 selected = port->daisy;
275 parport_release(dev);
276
277 if (selected != daisy) {
278 /* No corresponding device. */
279 parport_unregister_device(dev);
280 return NULL;
281 }
282 }
283
284 return dev;
285 }
286
287 /**
288 * parport_close - close a device opened with parport_open()
289 * @dev: device to close
290 *
291 * This is to parport_open() as parport_unregister_device() is to
292 * parport_register_device().
293 **/
294
parport_close(struct pardevice * dev)295 void parport_close(struct pardevice *dev)
296 {
297 parport_unregister_device(dev);
298 }
299
300 /* Send a daisy-chain-style CPP command packet. */
cpp_daisy(struct parport * port,int cmd)301 static int cpp_daisy(struct parport *port, int cmd)
302 {
303 unsigned char s;
304
305 parport_data_forward(port);
306 parport_write_data(port, 0xaa); udelay(2);
307 parport_write_data(port, 0x55); udelay(2);
308 parport_write_data(port, 0x00); udelay(2);
309 parport_write_data(port, 0xff); udelay(2);
310 s = parport_read_status(port) & (PARPORT_STATUS_BUSY
311 | PARPORT_STATUS_PAPEROUT
312 | PARPORT_STATUS_SELECT
313 | PARPORT_STATUS_ERROR);
314 if (s != (PARPORT_STATUS_BUSY
315 | PARPORT_STATUS_PAPEROUT
316 | PARPORT_STATUS_SELECT
317 | PARPORT_STATUS_ERROR)) {
318 pr_debug("%s: cpp_daisy: aa5500ff(%02x)\n", port->name, s);
319 return -ENXIO;
320 }
321
322 parport_write_data(port, 0x87); udelay(2);
323 s = parport_read_status(port) & (PARPORT_STATUS_BUSY
324 | PARPORT_STATUS_PAPEROUT
325 | PARPORT_STATUS_SELECT
326 | PARPORT_STATUS_ERROR);
327 if (s != (PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR)) {
328 pr_debug("%s: cpp_daisy: aa5500ff87(%02x)\n", port->name, s);
329 return -ENXIO;
330 }
331
332 parport_write_data(port, 0x78); udelay(2);
333 parport_write_data(port, cmd); udelay(2);
334 parport_frob_control(port,
335 PARPORT_CONTROL_STROBE,
336 PARPORT_CONTROL_STROBE);
337 udelay(1);
338 s = parport_read_status(port);
339 parport_frob_control(port, PARPORT_CONTROL_STROBE, 0);
340 udelay(1);
341 parport_write_data(port, 0xff); udelay(2);
342
343 return s;
344 }
345
346 /* Send a mux-style CPP command packet. */
cpp_mux(struct parport * port,int cmd)347 static int cpp_mux(struct parport *port, int cmd)
348 {
349 unsigned char s;
350 int rc;
351
352 parport_data_forward(port);
353 parport_write_data(port, 0xaa); udelay(2);
354 parport_write_data(port, 0x55); udelay(2);
355 parport_write_data(port, 0xf0); udelay(2);
356 parport_write_data(port, 0x0f); udelay(2);
357 parport_write_data(port, 0x52); udelay(2);
358 parport_write_data(port, 0xad); udelay(2);
359 parport_write_data(port, cmd); udelay(2);
360
361 s = parport_read_status(port);
362 if (!(s & PARPORT_STATUS_ACK)) {
363 pr_debug("%s: cpp_mux: aa55f00f52ad%02x(%02x)\n",
364 port->name, cmd, s);
365 return -EIO;
366 }
367
368 rc = (((s & PARPORT_STATUS_SELECT ? 1 : 0) << 0) |
369 ((s & PARPORT_STATUS_PAPEROUT ? 1 : 0) << 1) |
370 ((s & PARPORT_STATUS_BUSY ? 0 : 1) << 2) |
371 ((s & PARPORT_STATUS_ERROR ? 0 : 1) << 3));
372
373 return rc;
374 }
375
parport_daisy_deselect_all(struct parport * port)376 void parport_daisy_deselect_all(struct parport *port)
377 {
378 cpp_daisy(port, 0x30);
379 }
380
parport_daisy_select(struct parport * port,int daisy,int mode)381 int parport_daisy_select(struct parport *port, int daisy, int mode)
382 {
383 switch (mode)
384 {
385 // For these modes we should switch to EPP mode:
386 case IEEE1284_MODE_EPP:
387 case IEEE1284_MODE_EPPSL:
388 case IEEE1284_MODE_EPPSWE:
389 return !(cpp_daisy(port, 0x20 + daisy) &
390 PARPORT_STATUS_ERROR);
391
392 // For these modes we should switch to ECP mode:
393 case IEEE1284_MODE_ECP:
394 case IEEE1284_MODE_ECPRLE:
395 case IEEE1284_MODE_ECPSWE:
396 return !(cpp_daisy(port, 0xd0 + daisy) &
397 PARPORT_STATUS_ERROR);
398
399 // Nothing was told for BECP in Daisy chain specification.
400 // May be it's wise to use ECP?
401 case IEEE1284_MODE_BECP:
402 // Others use compat mode
403 case IEEE1284_MODE_NIBBLE:
404 case IEEE1284_MODE_BYTE:
405 case IEEE1284_MODE_COMPAT:
406 default:
407 return !(cpp_daisy(port, 0xe0 + daisy) &
408 PARPORT_STATUS_ERROR);
409 }
410 }
411
mux_present(struct parport * port)412 static int mux_present(struct parport *port)
413 {
414 return cpp_mux(port, 0x51) == 3;
415 }
416
num_mux_ports(struct parport * port)417 static int num_mux_ports(struct parport *port)
418 {
419 return cpp_mux(port, 0x58);
420 }
421
select_port(struct parport * port)422 static int select_port(struct parport *port)
423 {
424 int muxport = port->muxport;
425 return cpp_mux(port, 0x60 + muxport) == muxport;
426 }
427
assign_addrs(struct parport * port)428 static int assign_addrs(struct parport *port)
429 {
430 unsigned char s;
431 unsigned char daisy;
432 int thisdev = numdevs;
433 int detected;
434 char *deviceid;
435
436 parport_data_forward(port);
437 parport_write_data(port, 0xaa); udelay(2);
438 parport_write_data(port, 0x55); udelay(2);
439 parport_write_data(port, 0x00); udelay(2);
440 parport_write_data(port, 0xff); udelay(2);
441 s = parport_read_status(port) & (PARPORT_STATUS_BUSY
442 | PARPORT_STATUS_PAPEROUT
443 | PARPORT_STATUS_SELECT
444 | PARPORT_STATUS_ERROR);
445 if (s != (PARPORT_STATUS_BUSY
446 | PARPORT_STATUS_PAPEROUT
447 | PARPORT_STATUS_SELECT
448 | PARPORT_STATUS_ERROR)) {
449 pr_debug("%s: assign_addrs: aa5500ff(%02x)\n", port->name, s);
450 return 0;
451 }
452
453 parport_write_data(port, 0x87); udelay(2);
454 s = parport_read_status(port) & (PARPORT_STATUS_BUSY
455 | PARPORT_STATUS_PAPEROUT
456 | PARPORT_STATUS_SELECT
457 | PARPORT_STATUS_ERROR);
458 if (s != (PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR)) {
459 pr_debug("%s: assign_addrs: aa5500ff87(%02x)\n", port->name, s);
460 return 0;
461 }
462
463 parport_write_data(port, 0x78); udelay(2);
464 s = parport_read_status(port);
465
466 for (daisy = 0;
467 (s & (PARPORT_STATUS_PAPEROUT|PARPORT_STATUS_SELECT))
468 == (PARPORT_STATUS_PAPEROUT|PARPORT_STATUS_SELECT)
469 && daisy < 4;
470 ++daisy) {
471 parport_write_data(port, daisy);
472 udelay(2);
473 parport_frob_control(port,
474 PARPORT_CONTROL_STROBE,
475 PARPORT_CONTROL_STROBE);
476 udelay(1);
477 parport_frob_control(port, PARPORT_CONTROL_STROBE, 0);
478 udelay(1);
479
480 add_dev(numdevs++, port, daisy);
481
482 /* See if this device thought it was the last in the
483 * chain. */
484 if (!(s & PARPORT_STATUS_BUSY))
485 break;
486
487 /* We are seeing pass through status now. We see
488 last_dev from next device or if last_dev does not
489 work status lines from some non-daisy chain
490 device. */
491 s = parport_read_status(port);
492 }
493
494 parport_write_data(port, 0xff); udelay(2);
495 detected = numdevs - thisdev;
496 pr_debug("%s: Found %d daisy-chained devices\n", port->name, detected);
497
498 /* Ask the new devices to introduce themselves. */
499 deviceid = kmalloc(1024, GFP_KERNEL);
500 if (!deviceid) return 0;
501
502 for (daisy = 0; thisdev < numdevs; thisdev++, daisy++)
503 parport_device_id(thisdev, deviceid, 1024);
504
505 kfree(deviceid);
506 return detected;
507 }
508