1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) 2005, Intec Automation Inc.
4  * Copyright (C) 2014, Freescale Semiconductor, Inc.
5  */
6 
7 #include <linux/mtd/spi-nor.h>
8 
9 #include "core.h"
10 
11 static const struct flash_info xilinx_parts[] = {
12 	/* Xilinx S3AN Internal Flash */
13 	{ "3S50AN", S3AN_INFO(0x1f2200, 64, 264) },
14 	{ "3S200AN", S3AN_INFO(0x1f2400, 256, 264) },
15 	{ "3S400AN", S3AN_INFO(0x1f2400, 256, 264) },
16 	{ "3S700AN", S3AN_INFO(0x1f2500, 512, 264) },
17 	{ "3S1400AN", S3AN_INFO(0x1f2600, 512, 528) },
18 };
19 
20 /*
21  * This code converts an address to the Default Address Mode, that has non
22  * power of two page sizes. We must support this mode because it is the default
23  * mode supported by Xilinx tools, it can access the whole flash area and
24  * changing over to the Power-of-two mode is irreversible and corrupts the
25  * original data.
26  * Addr can safely be unsigned int, the biggest S3AN device is smaller than
27  * 4 MiB.
28  */
s3an_convert_addr(struct spi_nor * nor,u32 addr)29 static u32 s3an_convert_addr(struct spi_nor *nor, u32 addr)
30 {
31 	u32 offset, page;
32 
33 	offset = addr % nor->page_size;
34 	page = addr / nor->page_size;
35 	page <<= (nor->page_size > 512) ? 10 : 9;
36 
37 	return page | offset;
38 }
39 
xilinx_nor_setup(struct spi_nor * nor,const struct spi_nor_hwcaps * hwcaps)40 static int xilinx_nor_setup(struct spi_nor *nor,
41 			    const struct spi_nor_hwcaps *hwcaps)
42 {
43 	int ret;
44 
45 	ret = spi_nor_xread_sr(nor, nor->bouncebuf);
46 	if (ret)
47 		return ret;
48 
49 	nor->erase_opcode = SPINOR_OP_XSE;
50 	nor->program_opcode = SPINOR_OP_XPP;
51 	nor->read_opcode = SPINOR_OP_READ;
52 	nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
53 
54 	/*
55 	 * This flashes have a page size of 264 or 528 bytes (known as
56 	 * Default addressing mode). It can be changed to a more standard
57 	 * Power of two mode where the page size is 256/512. This comes
58 	 * with a price: there is 3% less of space, the data is corrupted
59 	 * and the page size cannot be changed back to default addressing
60 	 * mode.
61 	 *
62 	 * The current addressing mode can be read from the XRDSR register
63 	 * and should not be changed, because is a destructive operation.
64 	 */
65 	if (nor->bouncebuf[0] & XSR_PAGESIZE) {
66 		/* Flash in Power of 2 mode */
67 		nor->page_size = (nor->page_size == 264) ? 256 : 512;
68 		nor->mtd.writebufsize = nor->page_size;
69 		nor->mtd.size = 8 * nor->page_size * nor->info->n_sectors;
70 		nor->mtd.erasesize = 8 * nor->page_size;
71 	} else {
72 		/* Flash in Default addressing mode */
73 		nor->params->convert_addr = s3an_convert_addr;
74 		nor->mtd.erasesize = nor->info->sector_size;
75 	}
76 
77 	return 0;
78 }
79 
xilinx_post_sfdp_fixups(struct spi_nor * nor)80 static void xilinx_post_sfdp_fixups(struct spi_nor *nor)
81 {
82 	nor->params->setup = xilinx_nor_setup;
83 }
84 
85 static const struct spi_nor_fixups xilinx_fixups = {
86 	.post_sfdp = xilinx_post_sfdp_fixups,
87 };
88 
89 const struct spi_nor_manufacturer spi_nor_xilinx = {
90 	.name = "xilinx",
91 	.parts = xilinx_parts,
92 	.nparts = ARRAY_SIZE(xilinx_parts),
93 	.fixups = &xilinx_fixups,
94 };
95