1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3 * linux/can/dev.h
4 *
5 * Definitions for the CAN network device driver interface
6 *
7 * Copyright (C) 2006 Andrey Volkov <avolkov@varma-el.com>
8 * Varma Electronics Oy
9 *
10 * Copyright (C) 2008 Wolfgang Grandegger <wg@grandegger.com>
11 *
12 */
13
14 #ifndef _CAN_DEV_H
15 #define _CAN_DEV_H
16
17 #include <linux/can.h>
18 #include <linux/can/bittiming.h>
19 #include <linux/can/error.h>
20 #include <linux/can/led.h>
21 #include <linux/can/length.h>
22 #include <linux/can/netlink.h>
23 #include <linux/can/skb.h>
24 #include <linux/netdevice.h>
25
26 /*
27 * CAN mode
28 */
29 enum can_mode {
30 CAN_MODE_STOP = 0,
31 CAN_MODE_START,
32 CAN_MODE_SLEEP
33 };
34
35 enum can_termination_gpio {
36 CAN_TERMINATION_GPIO_DISABLED = 0,
37 CAN_TERMINATION_GPIO_ENABLED,
38 CAN_TERMINATION_GPIO_MAX,
39 };
40
41 /*
42 * CAN common private data
43 */
44 struct can_priv {
45 struct net_device *dev;
46 struct can_device_stats can_stats;
47
48 const struct can_bittiming_const *bittiming_const,
49 *data_bittiming_const;
50 struct can_bittiming bittiming, data_bittiming;
51 const struct can_tdc_const *tdc_const;
52 struct can_tdc tdc;
53
54 unsigned int bitrate_const_cnt;
55 const u32 *bitrate_const;
56 const u32 *data_bitrate_const;
57 unsigned int data_bitrate_const_cnt;
58 u32 bitrate_max;
59 struct can_clock clock;
60
61 unsigned int termination_const_cnt;
62 const u16 *termination_const;
63 u16 termination;
64 struct gpio_desc *termination_gpio;
65 u16 termination_gpio_ohms[CAN_TERMINATION_GPIO_MAX];
66
67 enum can_state state;
68
69 /* CAN controller features - see include/uapi/linux/can/netlink.h */
70 u32 ctrlmode; /* current options setting */
71 u32 ctrlmode_supported; /* options that can be modified by netlink */
72 u32 ctrlmode_static; /* static enabled options for driver/hardware */
73
74 int restart_ms;
75 struct delayed_work restart_work;
76
77 int (*do_set_bittiming)(struct net_device *dev);
78 int (*do_set_data_bittiming)(struct net_device *dev);
79 int (*do_set_mode)(struct net_device *dev, enum can_mode mode);
80 int (*do_set_termination)(struct net_device *dev, u16 term);
81 int (*do_get_state)(const struct net_device *dev,
82 enum can_state *state);
83 int (*do_get_berr_counter)(const struct net_device *dev,
84 struct can_berr_counter *bec);
85 int (*do_get_auto_tdcv)(const struct net_device *dev, u32 *tdcv);
86
87 unsigned int echo_skb_max;
88 struct sk_buff **echo_skb;
89
90 #ifdef CONFIG_CAN_LEDS
91 struct led_trigger *tx_led_trig;
92 char tx_led_trig_name[CAN_LED_NAME_SZ];
93 struct led_trigger *rx_led_trig;
94 char rx_led_trig_name[CAN_LED_NAME_SZ];
95 struct led_trigger *rxtx_led_trig;
96 char rxtx_led_trig_name[CAN_LED_NAME_SZ];
97 #endif
98 };
99
can_tdc_is_enabled(const struct can_priv * priv)100 static inline bool can_tdc_is_enabled(const struct can_priv *priv)
101 {
102 return !!(priv->ctrlmode & CAN_CTRLMODE_TDC_MASK);
103 }
104
105 /*
106 * can_get_relative_tdco() - TDCO relative to the sample point
107 *
108 * struct can_tdc::tdco represents the absolute offset from TDCV. Some
109 * controllers use instead an offset relative to the Sample Point (SP)
110 * such that:
111 *
112 * SSP = TDCV + absolute TDCO
113 * = TDCV + SP + relative TDCO
114 *
115 * -+----------- one bit ----------+-- TX pin
116 * |<--- Sample Point --->|
117 *
118 * --+----------- one bit ----------+-- RX pin
119 * |<-------- TDCV -------->|
120 * |<------------------------>| absolute TDCO
121 * |<--- Sample Point --->|
122 * | |<->| relative TDCO
123 * |<------------- Secondary Sample Point ------------>|
124 */
can_get_relative_tdco(const struct can_priv * priv)125 static inline s32 can_get_relative_tdco(const struct can_priv *priv)
126 {
127 const struct can_bittiming *dbt = &priv->data_bittiming;
128 s32 sample_point_in_tc = (CAN_SYNC_SEG + dbt->prop_seg +
129 dbt->phase_seg1) * dbt->brp;
130
131 return (s32)priv->tdc.tdco - sample_point_in_tc;
132 }
133
134 /* helper to define static CAN controller features at device creation time */
can_set_static_ctrlmode(struct net_device * dev,u32 static_mode)135 static inline void can_set_static_ctrlmode(struct net_device *dev,
136 u32 static_mode)
137 {
138 struct can_priv *priv = netdev_priv(dev);
139
140 /* alloc_candev() succeeded => netdev_priv() is valid at this point */
141 priv->ctrlmode = static_mode;
142 priv->ctrlmode_static = static_mode;
143
144 /* override MTU which was set by default in can_setup()? */
145 if (static_mode & CAN_CTRLMODE_FD)
146 dev->mtu = CANFD_MTU;
147 }
148
149 void can_setup(struct net_device *dev);
150
151 struct net_device *alloc_candev_mqs(int sizeof_priv, unsigned int echo_skb_max,
152 unsigned int txqs, unsigned int rxqs);
153 #define alloc_candev(sizeof_priv, echo_skb_max) \
154 alloc_candev_mqs(sizeof_priv, echo_skb_max, 1, 1)
155 #define alloc_candev_mq(sizeof_priv, echo_skb_max, count) \
156 alloc_candev_mqs(sizeof_priv, echo_skb_max, count, count)
157 void free_candev(struct net_device *dev);
158
159 /* a candev safe wrapper around netdev_priv */
160 struct can_priv *safe_candev_priv(struct net_device *dev);
161
162 int open_candev(struct net_device *dev);
163 void close_candev(struct net_device *dev);
164 int can_change_mtu(struct net_device *dev, int new_mtu);
165
166 int register_candev(struct net_device *dev);
167 void unregister_candev(struct net_device *dev);
168
169 int can_restart_now(struct net_device *dev);
170 void can_bus_off(struct net_device *dev);
171
172 const char *can_get_state_str(const enum can_state state);
173 void can_change_state(struct net_device *dev, struct can_frame *cf,
174 enum can_state tx_state, enum can_state rx_state);
175
176 #ifdef CONFIG_OF
177 void of_can_transceiver(struct net_device *dev);
178 #else
of_can_transceiver(struct net_device * dev)179 static inline void of_can_transceiver(struct net_device *dev) { }
180 #endif
181
182 extern struct rtnl_link_ops can_link_ops;
183 int can_netlink_register(void);
184 void can_netlink_unregister(void);
185
186 #endif /* !_CAN_DEV_H */
187