1 /*******************************************************************
2  * This file is part of the Emulex Linux Device Driver for         *
3  * Fibre Channel Host Bus Adapters.                                *
4  * Copyright (C) 2017-2021 Broadcom. All Rights Reserved. The term *
5  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     *
6  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
7  * EMULEX and SLI are trademarks of Emulex.                        *
8  * www.broadcom.com                                                *
9  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
10  *                                                                 *
11  * This program is free software; you can redistribute it and/or   *
12  * modify it under the terms of version 2 of the GNU General       *
13  * Public License as published by the Free Software Foundation.    *
14  * This program is distributed in the hope that it will be useful. *
15  * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
16  * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
17  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
18  * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
19  * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
20  * more details, a copy of which can be found in the file COPYING  *
21  * included with this package.                                     *
22  *******************************************************************/
23 
24 #include <scsi/scsi_host.h>
25 #include <linux/hashtable.h>
26 #include <linux/ktime.h>
27 #include <linux/workqueue.h>
28 
29 #if defined(CONFIG_DEBUG_FS) && !defined(CONFIG_SCSI_LPFC_DEBUG_FS)
30 #define CONFIG_SCSI_LPFC_DEBUG_FS
31 #endif
32 
33 struct lpfc_sli2_slim;
34 
35 #define ELX_MODEL_NAME_SIZE	80
36 
37 #define LPFC_PCI_DEV_LP		0x1
38 #define LPFC_PCI_DEV_OC		0x2
39 
40 #define LPFC_SLI_REV2		2
41 #define LPFC_SLI_REV3		3
42 #define LPFC_SLI_REV4		4
43 
44 #define LPFC_MAX_TARGET		4096	/* max number of targets supported */
45 #define LPFC_MAX_DISC_THREADS	64	/* max outstanding discovery els
46 					   requests */
47 #define LPFC_MAX_NS_RETRY	3	/* Number of retry attempts to contact
48 					   the NameServer  before giving up. */
49 #define LPFC_CMD_PER_LUN	3	/* max outstanding cmds per lun */
50 #define LPFC_DEFAULT_SG_SEG_CNT 64	/* sg element count per scsi cmnd */
51 #define LPFC_DEFAULT_MENLO_SG_SEG_CNT 128	/* sg element count per scsi
52 		cmnd for menlo needs nearly twice as for firmware
53 		downloads using bsg */
54 
55 #define LPFC_DEFAULT_XPSGL_SIZE	256
56 #define LPFC_MAX_SG_TABLESIZE	0xffff
57 #define LPFC_MIN_SG_SLI4_BUF_SZ	0x800	/* based on LPFC_DEFAULT_SG_SEG_CNT */
58 #define LPFC_MAX_BG_SLI4_SEG_CNT_DIF 128 /* sg element count for BlockGuard */
59 #define LPFC_MAX_SG_SEG_CNT_DIF 512	/* sg element count per scsi cmnd  */
60 #define LPFC_MAX_SG_SEG_CNT	4096	/* sg element count per scsi cmnd */
61 #define LPFC_MIN_SG_SEG_CNT	32	/* sg element count per scsi cmnd */
62 #define LPFC_MAX_SGL_SEG_CNT	512	/* SGL element count per scsi cmnd */
63 #define LPFC_MAX_BPL_SEG_CNT	4096	/* BPL element count per scsi cmnd */
64 #define LPFC_MAX_NVME_SEG_CNT	256	/* max SGL element cnt per NVME cmnd */
65 
66 #define LPFC_MAX_SGE_SIZE       0x80000000 /* Maximum data allowed in a SGE */
67 #define LPFC_IOCB_LIST_CNT	2250	/* list of IOCBs for fast-path usage. */
68 #define LPFC_Q_RAMP_UP_INTERVAL 120     /* lun q_depth ramp up interval */
69 #define LPFC_VNAME_LEN		100	/* vport symbolic name length */
70 #define LPFC_TGTQ_RAMPUP_PCENT	5	/* Target queue rampup in percentage */
71 #define LPFC_MIN_TGT_QDEPTH	10
72 #define LPFC_MAX_TGT_QDEPTH	0xFFFF
73 
74 #define  LPFC_MAX_BUCKET_COUNT 20	/* Maximum no. of buckets for stat data
75 					   collection. */
76 /*
77  * Following time intervals are used of adjusting SCSI device
78  * queue depths when there are driver resource error or Firmware
79  * resource error.
80  */
81 /* 1 Second */
82 #define QUEUE_RAMP_DOWN_INTERVAL	(msecs_to_jiffies(1000 * 1))
83 
84 /* Number of exchanges reserved for discovery to complete */
85 #define LPFC_DISC_IOCB_BUFF_COUNT 20
86 
87 #define LPFC_HB_MBOX_INTERVAL   5	/* Heart beat interval in seconds. */
88 #define LPFC_HB_MBOX_TIMEOUT    30	/* Heart beat timeout  in seconds. */
89 
90 /* Error Attention event polling interval */
91 #define LPFC_ERATT_POLL_INTERVAL	5 /* EATT poll interval in seconds */
92 
93 /* Define macros for 64 bit support */
94 #define putPaddrLow(addr)    ((uint32_t) (0xffffffff & (u64)(addr)))
95 #define putPaddrHigh(addr)   ((uint32_t) (0xffffffff & (((u64)(addr))>>32)))
96 #define getPaddr(high, low)  ((dma_addr_t)( \
97 			     (( (u64)(high)<<16 ) << 16)|( (u64)(low))))
98 /* Provide maximum configuration definitions. */
99 #define LPFC_DRVR_TIMEOUT	16	/* driver iocb timeout value in sec */
100 #define FC_MAX_ADPTMSG		64
101 
102 #define MAX_HBAEVT	32
103 #define MAX_HBAS_NO_RESET 16
104 
105 /* Number of MSI-X vectors the driver uses */
106 #define LPFC_MSIX_VECTORS	2
107 
108 /* lpfc wait event data ready flag */
109 #define LPFC_DATA_READY		0	/* bit 0 */
110 
111 /* queue dump line buffer size */
112 #define LPFC_LBUF_SZ		128
113 
114 /* mailbox system shutdown options */
115 #define LPFC_MBX_NO_WAIT	0
116 #define LPFC_MBX_WAIT		1
117 
118 #define LPFC_CFG_PARAM_MAGIC_NUM 0xFEAA0005
119 #define LPFC_PORT_CFG_NAME "/cfg/port.cfg"
120 
121 #define lpfc_rangecheck(val, min, max) \
122 	((uint)(val) >= (uint)(min) && (val) <= (max))
123 
124 enum lpfc_polling_flags {
125 	ENABLE_FCP_RING_POLLING = 0x1,
126 	DISABLE_FCP_RING_INT    = 0x2
127 };
128 
129 struct perf_prof {
130 	uint16_t cmd_cpu[40];
131 	uint16_t rsp_cpu[40];
132 	uint16_t qh_cpu[40];
133 	uint16_t wqidx[40];
134 };
135 
136 /*
137  * Provide for FC4 TYPE x28 - NVME.  The
138  * bit mask for FCP and NVME is 0x8 identically
139  * because they are 32 bit positions distance.
140  */
141 #define LPFC_FC4_TYPE_BITMASK	0x00000100
142 
143 /* Provide DMA memory definitions the driver uses per port instance. */
144 struct lpfc_dmabuf {
145 	struct list_head list;
146 	void *virt;		/* virtual address ptr */
147 	dma_addr_t phys;	/* mapped address */
148 	uint32_t   buffer_tag;	/* used for tagged queue ring */
149 };
150 
151 struct lpfc_nvmet_ctxbuf {
152 	struct list_head list;
153 	struct lpfc_async_xchg_ctx *context;
154 	struct lpfc_iocbq *iocbq;
155 	struct lpfc_sglq *sglq;
156 	struct work_struct defer_work;
157 };
158 
159 struct lpfc_dma_pool {
160 	struct lpfc_dmabuf   *elements;
161 	uint32_t    max_count;
162 	uint32_t    current_count;
163 };
164 
165 struct hbq_dmabuf {
166 	struct lpfc_dmabuf hbuf;
167 	struct lpfc_dmabuf dbuf;
168 	uint16_t total_size;
169 	uint16_t bytes_recv;
170 	uint32_t tag;
171 	struct lpfc_cq_event cq_event;
172 	unsigned long time_stamp;
173 	void *context;
174 };
175 
176 struct rqb_dmabuf {
177 	struct lpfc_dmabuf hbuf;
178 	struct lpfc_dmabuf dbuf;
179 	uint16_t total_size;
180 	uint16_t bytes_recv;
181 	uint16_t idx;
182 	struct lpfc_queue *hrq;	  /* ptr to associated Header RQ */
183 	struct lpfc_queue *drq;	  /* ptr to associated Data RQ */
184 };
185 
186 /* Priority bit.  Set value to exceed low water mark in lpfc_mem. */
187 #define MEM_PRI		0x100
188 
189 
190 /****************************************************************************/
191 /*      Device VPD save area                                                */
192 /****************************************************************************/
193 typedef struct lpfc_vpd {
194 	uint32_t status;	/* vpd status value */
195 	uint32_t length;	/* number of bytes actually returned */
196 	struct {
197 		uint32_t rsvd1;	/* Revision numbers */
198 		uint32_t biuRev;
199 		uint32_t smRev;
200 		uint32_t smFwRev;
201 		uint32_t endecRev;
202 		uint16_t rBit;
203 		uint8_t fcphHigh;
204 		uint8_t fcphLow;
205 		uint8_t feaLevelHigh;
206 		uint8_t feaLevelLow;
207 		uint32_t postKernRev;
208 		uint32_t opFwRev;
209 		uint8_t opFwName[16];
210 		uint32_t sli1FwRev;
211 		uint8_t sli1FwName[16];
212 		uint32_t sli2FwRev;
213 		uint8_t sli2FwName[16];
214 	} rev;
215 	struct {
216 #ifdef __BIG_ENDIAN_BITFIELD
217 		uint32_t rsvd3  :20;  /* Reserved                             */
218 		uint32_t rsvd2	: 3;  /* Reserved                             */
219 		uint32_t cbg	: 1;  /* Configure BlockGuard                 */
220 		uint32_t cmv	: 1;  /* Configure Max VPIs                   */
221 		uint32_t ccrp   : 1;  /* Config Command Ring Polling          */
222 		uint32_t csah   : 1;  /* Configure Synchronous Abort Handling */
223 		uint32_t chbs   : 1;  /* Cofigure Host Backing store          */
224 		uint32_t cinb   : 1;  /* Enable Interrupt Notification Block  */
225 		uint32_t cerbm	: 1;  /* Configure Enhanced Receive Buf Mgmt  */
226 		uint32_t cmx	: 1;  /* Configure Max XRIs                   */
227 		uint32_t cmr	: 1;  /* Configure Max RPIs                   */
228 #else	/*  __LITTLE_ENDIAN */
229 		uint32_t cmr	: 1;  /* Configure Max RPIs                   */
230 		uint32_t cmx	: 1;  /* Configure Max XRIs                   */
231 		uint32_t cerbm	: 1;  /* Configure Enhanced Receive Buf Mgmt  */
232 		uint32_t cinb   : 1;  /* Enable Interrupt Notification Block  */
233 		uint32_t chbs   : 1;  /* Cofigure Host Backing store          */
234 		uint32_t csah   : 1;  /* Configure Synchronous Abort Handling */
235 		uint32_t ccrp   : 1;  /* Config Command Ring Polling          */
236 		uint32_t cmv	: 1;  /* Configure Max VPIs                   */
237 		uint32_t cbg	: 1;  /* Configure BlockGuard                 */
238 		uint32_t rsvd2	: 3;  /* Reserved                             */
239 		uint32_t rsvd3  :20;  /* Reserved                             */
240 #endif
241 	} sli3Feat;
242 } lpfc_vpd_t;
243 
244 
245 /*
246  * lpfc stat counters
247  */
248 struct lpfc_stats {
249 	/* Statistics for ELS commands */
250 	uint32_t elsLogiCol;
251 	uint32_t elsRetryExceeded;
252 	uint32_t elsXmitRetry;
253 	uint32_t elsDelayRetry;
254 	uint32_t elsRcvDrop;
255 	uint32_t elsRcvFrame;
256 	uint32_t elsRcvRSCN;
257 	uint32_t elsRcvRNID;
258 	uint32_t elsRcvFARP;
259 	uint32_t elsRcvFARPR;
260 	uint32_t elsRcvFLOGI;
261 	uint32_t elsRcvPLOGI;
262 	uint32_t elsRcvADISC;
263 	uint32_t elsRcvPDISC;
264 	uint32_t elsRcvFAN;
265 	uint32_t elsRcvLOGO;
266 	uint32_t elsRcvPRLO;
267 	uint32_t elsRcvPRLI;
268 	uint32_t elsRcvLIRR;
269 	uint32_t elsRcvRLS;
270 	uint32_t elsRcvRPL;
271 	uint32_t elsRcvRRQ;
272 	uint32_t elsRcvRTV;
273 	uint32_t elsRcvECHO;
274 	uint32_t elsRcvLCB;
275 	uint32_t elsRcvRDP;
276 	uint32_t elsRcvRDF;
277 	uint32_t elsXmitFLOGI;
278 	uint32_t elsXmitFDISC;
279 	uint32_t elsXmitPLOGI;
280 	uint32_t elsXmitPRLI;
281 	uint32_t elsXmitADISC;
282 	uint32_t elsXmitLOGO;
283 	uint32_t elsXmitSCR;
284 	uint32_t elsXmitRSCN;
285 	uint32_t elsXmitRNID;
286 	uint32_t elsXmitFARP;
287 	uint32_t elsXmitFARPR;
288 	uint32_t elsXmitACC;
289 	uint32_t elsXmitLSRJT;
290 
291 	uint32_t frameRcvBcast;
292 	uint32_t frameRcvMulti;
293 	uint32_t strayXmitCmpl;
294 	uint32_t frameXmitDelay;
295 	uint32_t xriCmdCmpl;
296 	uint32_t xriStatErr;
297 	uint32_t LinkUp;
298 	uint32_t LinkDown;
299 	uint32_t LinkMultiEvent;
300 	uint32_t NoRcvBuf;
301 	uint32_t fcpCmd;
302 	uint32_t fcpCmpl;
303 	uint32_t fcpRspErr;
304 	uint32_t fcpRemoteStop;
305 	uint32_t fcpPortRjt;
306 	uint32_t fcpPortBusy;
307 	uint32_t fcpError;
308 	uint32_t fcpLocalErr;
309 };
310 
311 struct lpfc_hba;
312 
313 
314 #define LPFC_VMID_TIMER   300	/* timer interval in seconds */
315 
316 #define LPFC_MAX_VMID_SIZE      256
317 #define LPFC_COMPRESS_VMID_SIZE 16
318 
319 union lpfc_vmid_io_tag {
320 	u32 app_id;	/* App Id vmid */
321 	u8 cs_ctl_vmid;	/* Priority tag vmid */
322 };
323 
324 #define JIFFIES_PER_HR	(HZ * 60 * 60)
325 
326 struct lpfc_vmid {
327 	u8 flag;
328 #define LPFC_VMID_SLOT_FREE     0x0
329 #define LPFC_VMID_SLOT_USED     0x1
330 #define LPFC_VMID_REQ_REGISTER  0x2
331 #define LPFC_VMID_REGISTERED    0x4
332 #define LPFC_VMID_DE_REGISTER   0x8
333 	char host_vmid[LPFC_MAX_VMID_SIZE];
334 	union lpfc_vmid_io_tag un;
335 	struct hlist_node hnode;
336 	u64 io_rd_cnt;
337 	u64 io_wr_cnt;
338 	u8 vmid_len;
339 	u8 delete_inactive; /* Delete if inactive flag 0 = no, 1 = yes */
340 	u32 hash_index;
341 	u64 __percpu *last_io_time;
342 };
343 
344 #define lpfc_vmid_is_type_priority_tag(vport)\
345 	(vport->vmid_priority_tagging ? 1 : 0)
346 
347 #define LPFC_VMID_HASH_SIZE     256
348 #define LPFC_VMID_HASH_MASK     255
349 #define LPFC_VMID_HASH_SHIFT    6
350 
351 struct lpfc_vmid_context {
352 	struct lpfc_vmid *vmp;
353 	struct lpfc_nodelist *nlp;
354 	bool instantiated;
355 };
356 
357 struct lpfc_vmid_priority_range {
358 	u8 low;
359 	u8 high;
360 	u8 qos;
361 };
362 
363 struct lpfc_vmid_priority_info {
364 	u32 num_descriptors;
365 	struct lpfc_vmid_priority_range *vmid_range;
366 };
367 
368 #define QFPA_EVEN_ONLY 0x01
369 #define QFPA_ODD_ONLY  0x02
370 #define QFPA_EVEN_ODD  0x03
371 
372 enum discovery_state {
373 	LPFC_VPORT_UNKNOWN     =  0,    /* vport state is unknown */
374 	LPFC_VPORT_FAILED      =  1,    /* vport has failed */
375 	LPFC_LOCAL_CFG_LINK    =  6,    /* local NPORT Id configured */
376 	LPFC_FLOGI             =  7,    /* FLOGI sent to Fabric */
377 	LPFC_FDISC             =  8,    /* FDISC sent for vport */
378 	LPFC_FABRIC_CFG_LINK   =  9,    /* Fabric assigned NPORT Id
379 				         * configured */
380 	LPFC_NS_REG            =  10,   /* Register with NameServer */
381 	LPFC_NS_QRY            =  11,   /* Query NameServer for NPort ID list */
382 	LPFC_BUILD_DISC_LIST   =  12,   /* Build ADISC and PLOGI lists for
383 				         * device authentication / discovery */
384 	LPFC_DISC_AUTH         =  13,   /* Processing ADISC list */
385 	LPFC_VPORT_READY       =  32,
386 };
387 
388 enum hba_state {
389 	LPFC_LINK_UNKNOWN    =   0,   /* HBA state is unknown */
390 	LPFC_WARM_START      =   1,   /* HBA state after selective reset */
391 	LPFC_INIT_START      =   2,   /* Initial state after board reset */
392 	LPFC_INIT_MBX_CMDS   =   3,   /* Initialize HBA with mbox commands */
393 	LPFC_LINK_DOWN       =   4,   /* HBA initialized, link is down */
394 	LPFC_LINK_UP         =   5,   /* Link is up  - issue READ_LA */
395 	LPFC_CLEAR_LA        =   6,   /* authentication cmplt - issue
396 				       * CLEAR_LA */
397 	LPFC_HBA_READY       =  32,
398 	LPFC_HBA_ERROR       =  -1
399 };
400 
401 struct lpfc_trunk_link_state {
402 	enum hba_state state;
403 	uint8_t fault;
404 };
405 
406 struct lpfc_trunk_link  {
407 	struct lpfc_trunk_link_state link0,
408 				     link1,
409 				     link2,
410 				     link3;
411 };
412 
413 /* Format of congestion module parameters */
414 struct lpfc_cgn_param {
415 	uint32_t cgn_param_magic;
416 	uint8_t  cgn_param_version;	/* version 1 */
417 	uint8_t  cgn_param_mode;	/* 0=off 1=managed 2=monitor only */
418 #define LPFC_CFG_OFF		0
419 #define LPFC_CFG_MANAGED	1
420 #define LPFC_CFG_MONITOR	2
421 	uint8_t  cgn_rsvd1;
422 	uint8_t  cgn_rsvd2;
423 	uint8_t  cgn_param_level0;
424 	uint8_t  cgn_param_level1;
425 	uint8_t  cgn_param_level2;
426 	uint8_t  byte11;
427 	uint8_t  byte12;
428 	uint8_t  byte13;
429 	uint8_t  byte14;
430 	uint8_t  byte15;
431 };
432 
433 /* Max number of days of congestion data */
434 #define LPFC_MAX_CGN_DAYS 10
435 
436 /* Format of congestion buffer info
437  * This structure defines memory thats allocated and registered with
438  * the HBA firmware. When adding or removing fields from this structure
439  * the alignment must match the HBA firmware.
440  */
441 
442 struct lpfc_cgn_info {
443 	/* Header */
444 	__le16   cgn_info_size;		/* is sizeof(struct lpfc_cgn_info) */
445 	uint8_t  cgn_info_version;	/* represents format of structure */
446 #define LPFC_CGN_INFO_V1	1
447 #define LPFC_CGN_INFO_V2	2
448 #define LPFC_CGN_INFO_V3	3
449 	uint8_t  cgn_info_mode;		/* 0=off 1=managed 2=monitor only */
450 	uint8_t  cgn_info_detect;
451 	uint8_t  cgn_info_action;
452 	uint8_t  cgn_info_level0;
453 	uint8_t  cgn_info_level1;
454 	uint8_t  cgn_info_level2;
455 
456 	/* Start Time */
457 	uint8_t  cgn_info_month;
458 	uint8_t  cgn_info_day;
459 	uint8_t  cgn_info_year;
460 	uint8_t  cgn_info_hour;
461 	uint8_t  cgn_info_minute;
462 	uint8_t  cgn_info_second;
463 
464 	/* minute / hours / daily indices */
465 	uint8_t  cgn_index_minute;
466 	uint8_t  cgn_index_hour;
467 	uint8_t  cgn_index_day;
468 
469 	__le16   cgn_warn_freq;
470 	__le16   cgn_alarm_freq;
471 	__le16   cgn_lunq;
472 	uint8_t  cgn_pad1[8];
473 
474 	/* Driver Information */
475 	__le16   cgn_drvr_min[60];
476 	__le32   cgn_drvr_hr[24];
477 	__le32   cgn_drvr_day[LPFC_MAX_CGN_DAYS];
478 
479 	/* Congestion Warnings */
480 	__le16   cgn_warn_min[60];
481 	__le32   cgn_warn_hr[24];
482 	__le32   cgn_warn_day[LPFC_MAX_CGN_DAYS];
483 
484 	/* Latency Information */
485 	__le32   cgn_latency_min[60];
486 	__le32   cgn_latency_hr[24];
487 	__le32   cgn_latency_day[LPFC_MAX_CGN_DAYS];
488 
489 	/* Bandwidth Information */
490 	__le16   cgn_bw_min[60];
491 	__le16   cgn_bw_hr[24];
492 	__le16   cgn_bw_day[LPFC_MAX_CGN_DAYS];
493 
494 	/* Congestion Alarms */
495 	__le16   cgn_alarm_min[60];
496 	__le32   cgn_alarm_hr[24];
497 	__le32   cgn_alarm_day[LPFC_MAX_CGN_DAYS];
498 
499 	/* Start of congestion statistics */
500 	uint8_t  cgn_stat_npm;		/* Notifications per minute */
501 
502 	/* Start Time */
503 	uint8_t  cgn_stat_month;
504 	uint8_t  cgn_stat_day;
505 	uint8_t  cgn_stat_year;
506 	uint8_t  cgn_stat_hour;
507 	uint8_t  cgn_stat_minute;
508 	uint8_t  cgn_pad2[2];
509 
510 	__le32   cgn_notification;
511 	__le32   cgn_peer_notification;
512 	__le32   link_integ_notification;
513 	__le32   delivery_notification;
514 
515 	uint8_t  cgn_stat_cgn_month; /* Last congestion notification FPIN */
516 	uint8_t  cgn_stat_cgn_day;
517 	uint8_t  cgn_stat_cgn_year;
518 	uint8_t  cgn_stat_cgn_hour;
519 	uint8_t  cgn_stat_cgn_min;
520 	uint8_t  cgn_stat_cgn_sec;
521 
522 	uint8_t  cgn_stat_peer_month; /* Last peer congestion FPIN */
523 	uint8_t  cgn_stat_peer_day;
524 	uint8_t  cgn_stat_peer_year;
525 	uint8_t  cgn_stat_peer_hour;
526 	uint8_t  cgn_stat_peer_min;
527 	uint8_t  cgn_stat_peer_sec;
528 
529 	uint8_t  cgn_stat_lnk_month; /* Last link integrity FPIN */
530 	uint8_t  cgn_stat_lnk_day;
531 	uint8_t  cgn_stat_lnk_year;
532 	uint8_t  cgn_stat_lnk_hour;
533 	uint8_t  cgn_stat_lnk_min;
534 	uint8_t  cgn_stat_lnk_sec;
535 
536 	uint8_t  cgn_stat_del_month; /* Last delivery notification FPIN */
537 	uint8_t  cgn_stat_del_day;
538 	uint8_t  cgn_stat_del_year;
539 	uint8_t  cgn_stat_del_hour;
540 	uint8_t  cgn_stat_del_min;
541 	uint8_t  cgn_stat_del_sec;
542 #define LPFC_CGN_STAT_SIZE	48
543 #define LPFC_CGN_DATA_SIZE	(sizeof(struct lpfc_cgn_info) -  \
544 				LPFC_CGN_STAT_SIZE - sizeof(uint32_t))
545 
546 	__le32   cgn_info_crc;
547 #define LPFC_CGN_CRC32_MAGIC_NUMBER	0x1EDC6F41
548 #define LPFC_CGN_CRC32_SEED		0xFFFFFFFF
549 };
550 
551 #define LPFC_CGN_INFO_SZ	(sizeof(struct lpfc_cgn_info) -  \
552 				sizeof(uint32_t))
553 
554 struct lpfc_cgn_stat {
555 	atomic64_t total_bytes;
556 	atomic64_t rcv_bytes;
557 	atomic64_t rx_latency;
558 #define LPFC_CGN_NOT_SENT	0xFFFFFFFFFFFFFFFFLL
559 	atomic_t rx_io_cnt;
560 };
561 
562 struct lpfc_cgn_acqe_stat {
563 	atomic64_t alarm;
564 	atomic64_t warn;
565 };
566 
567 struct lpfc_vport {
568 	struct lpfc_hba *phba;
569 	struct list_head listentry;
570 	uint8_t port_type;
571 #define LPFC_PHYSICAL_PORT 1
572 #define LPFC_NPIV_PORT  2
573 #define LPFC_FABRIC_PORT 3
574 	enum discovery_state port_state;
575 
576 	uint16_t vpi;
577 	uint16_t vfi;
578 	uint8_t vpi_state;
579 #define LPFC_VPI_REGISTERED	0x1
580 
581 	uint32_t fc_flag;	/* FC flags */
582 /* Several of these flags are HBA centric and should be moved to
583  * phba->link_flag (e.g. FC_PTP, FC_PUBLIC_LOOP)
584  */
585 #define FC_PT2PT                0x1	 /* pt2pt with no fabric */
586 #define FC_PT2PT_PLOGI          0x2	 /* pt2pt initiate PLOGI */
587 #define FC_DISC_TMO             0x4	 /* Discovery timer running */
588 #define FC_PUBLIC_LOOP          0x8	 /* Public loop */
589 #define FC_LBIT                 0x10	 /* LOGIN bit in loopinit set */
590 #define FC_RSCN_MODE            0x20	 /* RSCN cmd rcv'ed */
591 #define FC_NLP_MORE             0x40	 /* More node to process in node tbl */
592 #define FC_OFFLINE_MODE         0x80	 /* Interface is offline for diag */
593 #define FC_FABRIC               0x100	 /* We are fabric attached */
594 #define FC_VPORT_LOGO_RCVD      0x200    /* LOGO received on vport */
595 #define FC_RSCN_DISCOVERY       0x400	 /* Auth all devices after RSCN */
596 #define FC_LOGO_RCVD_DID_CHNG   0x800    /* FDISC on phys port detect DID chng*/
597 #define FC_SCSI_SCAN_TMO        0x4000	 /* scsi scan timer running */
598 #define FC_ABORT_DISCOVERY      0x8000	 /* we want to abort discovery */
599 #define FC_NDISC_ACTIVE         0x10000	 /* NPort discovery active */
600 #define FC_BYPASSED_MODE        0x20000	 /* NPort is in bypassed mode */
601 #define FC_VPORT_NEEDS_REG_VPI	0x80000  /* Needs to have its vpi registered */
602 #define FC_RSCN_DEFERRED	0x100000 /* A deferred RSCN being processed */
603 #define FC_VPORT_NEEDS_INIT_VPI 0x200000 /* Need to INIT_VPI before FDISC */
604 #define FC_VPORT_CVL_RCVD	0x400000 /* VLink failed due to CVL	 */
605 #define FC_VFI_REGISTERED	0x800000 /* VFI is registered */
606 #define FC_FDISC_COMPLETED	0x1000000/* FDISC completed */
607 #define FC_DISC_DELAYED		0x2000000/* Delay NPort discovery */
608 
609 	uint32_t ct_flags;
610 #define FC_CT_RFF_ID		0x1	 /* RFF_ID accepted by switch */
611 #define FC_CT_RNN_ID		0x2	 /* RNN_ID accepted by switch */
612 #define FC_CT_RSNN_NN		0x4	 /* RSNN_NN accepted by switch */
613 #define FC_CT_RSPN_ID		0x8	 /* RSPN_ID accepted by switch */
614 #define FC_CT_RFT_ID		0x10	 /* RFT_ID accepted by switch */
615 
616 	struct list_head fc_nodes;
617 
618 	/* Keep counters for the number of entries in each list. */
619 	uint16_t fc_plogi_cnt;
620 	uint16_t fc_adisc_cnt;
621 	uint16_t fc_reglogin_cnt;
622 	uint16_t fc_prli_cnt;
623 	uint16_t fc_unmap_cnt;
624 	uint16_t fc_map_cnt;
625 	uint16_t fc_npr_cnt;
626 	uint16_t fc_unused_cnt;
627 	struct serv_parm fc_sparam;	/* buffer for our service parameters */
628 
629 	uint32_t fc_myDID;	/* fibre channel S_ID */
630 	uint32_t fc_prevDID;	/* previous fibre channel S_ID */
631 	struct lpfc_name fabric_portname;
632 	struct lpfc_name fabric_nodename;
633 
634 	int32_t stopped;   /* HBA has not been restarted since last ERATT */
635 	uint8_t fc_linkspeed;	/* Link speed after last READ_LA */
636 
637 	uint32_t num_disc_nodes;	/* in addition to hba_state */
638 	uint32_t gidft_inp;		/* cnt of outstanding GID_FTs */
639 
640 	uint32_t fc_nlp_cnt;	/* outstanding NODELIST requests */
641 	uint32_t fc_rscn_id_cnt;	/* count of RSCNs payloads in list */
642 	uint32_t fc_rscn_flush;		/* flag use of fc_rscn_id_list */
643 	struct lpfc_dmabuf *fc_rscn_id_list[FC_MAX_HOLD_RSCN];
644 	struct lpfc_name fc_nodename;	/* fc nodename */
645 	struct lpfc_name fc_portname;	/* fc portname */
646 
647 	struct lpfc_work_evt disc_timeout_evt;
648 
649 	struct timer_list fc_disctmo;	/* Discovery rescue timer */
650 	uint8_t fc_ns_retry;	/* retries for fabric nameserver */
651 	uint32_t fc_prli_sent;	/* cntr for outstanding PRLIs */
652 
653 	spinlock_t work_port_lock;
654 	uint32_t work_port_events; /* Timeout to be handled  */
655 #define WORKER_DISC_TMO                0x1	/* vport: Discovery timeout */
656 #define WORKER_ELS_TMO                 0x2	/* vport: ELS timeout */
657 #define WORKER_DELAYED_DISC_TMO        0x8	/* vport: delayed discovery */
658 
659 #define WORKER_MBOX_TMO                0x100	/* hba: MBOX timeout */
660 #define WORKER_HB_TMO                  0x200	/* hba: Heart beat timeout */
661 #define WORKER_FABRIC_BLOCK_TMO        0x400	/* hba: fabric block timeout */
662 #define WORKER_RAMP_DOWN_QUEUE         0x800	/* hba: Decrease Q depth */
663 #define WORKER_RAMP_UP_QUEUE           0x1000	/* hba: Increase Q depth */
664 #define WORKER_SERVICE_TXQ             0x2000	/* hba: IOCBs on the txq */
665 #define WORKER_CHECK_INACTIVE_VMID     0x4000	/* hba: check inactive vmids */
666 #define WORKER_CHECK_VMID_ISSUE_QFPA   0x8000	/* vport: Check if qfpa needs
667 						 * to be issued */
668 
669 	struct timer_list els_tmofunc;
670 	struct timer_list delayed_disc_tmo;
671 
672 	int unreg_vpi_cmpl;
673 
674 	uint8_t load_flag;
675 #define FC_LOADING		0x1	/* HBA in process of loading drvr */
676 #define FC_UNLOADING		0x2	/* HBA in process of unloading drvr */
677 #define FC_ALLOW_FDMI		0x4	/* port is ready for FDMI requests */
678 #define FC_ALLOW_VMID		0x8	/* Allow VMID I/Os */
679 #define FC_DEREGISTER_ALL_APP_ID	0x10	/* Deregister all VMIDs */
680 	/* Vport Config Parameters */
681 	uint32_t cfg_scan_down;
682 	uint32_t cfg_lun_queue_depth;
683 	uint32_t cfg_nodev_tmo;
684 	uint32_t cfg_devloss_tmo;
685 	uint32_t cfg_restrict_login;
686 	uint32_t cfg_peer_port_login;
687 	uint32_t cfg_fcp_class;
688 	uint32_t cfg_use_adisc;
689 	uint32_t cfg_discovery_threads;
690 	uint32_t cfg_log_verbose;
691 	uint32_t cfg_enable_fc4_type;
692 	uint32_t cfg_max_luns;
693 	uint32_t cfg_enable_da_id;
694 	uint32_t cfg_max_scsicmpl_time;
695 	uint32_t cfg_tgt_queue_depth;
696 	uint32_t cfg_first_burst_size;
697 	uint32_t dev_loss_tmo_changed;
698 	/* VMID parameters */
699 	u8 lpfc_vmid_host_uuid[LPFC_COMPRESS_VMID_SIZE];
700 	u32 max_vmid;	/* maximum VMIDs allowed per port */
701 	u32 cur_vmid_cnt;	/* Current VMID count */
702 #define LPFC_MIN_VMID	4
703 #define LPFC_MAX_VMID	255
704 	u32 vmid_inactivity_timeout;	/* Time after which the VMID */
705 						/* deregisters from switch */
706 	u32 vmid_priority_tagging;
707 #define LPFC_VMID_PRIO_TAG_DISABLE	0 /* Disable */
708 #define LPFC_VMID_PRIO_TAG_SUP_TARGETS	1 /* Allow supported targets only */
709 #define LPFC_VMID_PRIO_TAG_ALL_TARGETS	2 /* Allow all targets */
710 	unsigned long *vmid_priority_range;
711 #define LPFC_VMID_MAX_PRIORITY_RANGE    256
712 #define LPFC_VMID_PRIORITY_BITMAP_SIZE  32
713 	u8 vmid_flag;
714 #define LPFC_VMID_IN_USE		0x1
715 #define LPFC_VMID_ISSUE_QFPA		0x2
716 #define LPFC_VMID_QFPA_CMPL		0x4
717 #define LPFC_VMID_QOS_ENABLED		0x8
718 #define LPFC_VMID_TIMER_ENBLD		0x10
719 	struct fc_qfpa_res *qfpa_res;
720 
721 	struct fc_vport *fc_vport;
722 
723 	struct lpfc_vmid *vmid;
724 	DECLARE_HASHTABLE(hash_table, 8);
725 	rwlock_t vmid_lock;
726 	struct lpfc_vmid_priority_info vmid_priority;
727 
728 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
729 	struct dentry *debug_disc_trc;
730 	struct dentry *debug_nodelist;
731 	struct dentry *debug_nvmestat;
732 	struct dentry *debug_scsistat;
733 	struct dentry *debug_ioktime;
734 	struct dentry *debug_hdwqstat;
735 	struct dentry *vport_debugfs_root;
736 	struct lpfc_debugfs_trc *disc_trc;
737 	atomic_t disc_trc_cnt;
738 #endif
739 	uint8_t stat_data_enabled;
740 	uint8_t stat_data_blocked;
741 	struct list_head rcv_buffer_list;
742 	unsigned long rcv_buffer_time_stamp;
743 	uint32_t vport_flag;
744 #define STATIC_VPORT	1
745 #define FAWWPN_SET	2
746 #define FAWWPN_PARAM_CHG	4
747 
748 	uint16_t fdmi_num_disc;
749 	uint32_t fdmi_hba_mask;
750 	uint32_t fdmi_port_mask;
751 
752 	/* There is a single nvme instance per vport. */
753 	struct nvme_fc_local_port *localport;
754 	uint8_t  nvmei_support; /* driver supports NVME Initiator */
755 	uint32_t last_fcp_wqidx;
756 	uint32_t rcv_flogi_cnt; /* How many unsol FLOGIs ACK'd. */
757 };
758 
759 struct hbq_s {
760 	uint16_t entry_count;	  /* Current number of HBQ slots */
761 	uint16_t buffer_count;	  /* Current number of buffers posted */
762 	uint32_t next_hbqPutIdx;  /* Index to next HBQ slot to use */
763 	uint32_t hbqPutIdx;	  /* HBQ slot to use */
764 	uint32_t local_hbqGetIdx; /* Local copy of Get index from Port */
765 	void    *hbq_virt;	  /* Virtual ptr to this hbq */
766 	struct list_head hbq_buffer_list;  /* buffers assigned to this HBQ */
767 				  /* Callback for HBQ buffer allocation */
768 	struct hbq_dmabuf *(*hbq_alloc_buffer) (struct lpfc_hba *);
769 				  /* Callback for HBQ buffer free */
770 	void               (*hbq_free_buffer) (struct lpfc_hba *,
771 					       struct hbq_dmabuf *);
772 };
773 
774 /* this matches the position in the lpfc_hbq_defs array */
775 #define LPFC_ELS_HBQ	0
776 #define LPFC_MAX_HBQS	1
777 
778 enum hba_temp_state {
779 	HBA_NORMAL_TEMP,
780 	HBA_OVER_TEMP
781 };
782 
783 enum intr_type_t {
784 	NONE = 0,
785 	INTx,
786 	MSI,
787 	MSIX,
788 };
789 
790 #define LPFC_CT_CTX_MAX		64
791 struct unsol_rcv_ct_ctx {
792 	uint32_t ctxt_id;
793 	uint32_t SID;
794 	uint32_t valid;
795 #define UNSOL_INVALID		0
796 #define UNSOL_VALID		1
797 	uint16_t oxid;
798 	uint16_t rxid;
799 };
800 
801 #define LPFC_USER_LINK_SPEED_AUTO	0	/* auto select (default)*/
802 #define LPFC_USER_LINK_SPEED_1G		1	/* 1 Gigabaud */
803 #define LPFC_USER_LINK_SPEED_2G		2	/* 2 Gigabaud */
804 #define LPFC_USER_LINK_SPEED_4G		4	/* 4 Gigabaud */
805 #define LPFC_USER_LINK_SPEED_8G		8	/* 8 Gigabaud */
806 #define LPFC_USER_LINK_SPEED_10G	10	/* 10 Gigabaud */
807 #define LPFC_USER_LINK_SPEED_16G	16	/* 16 Gigabaud */
808 #define LPFC_USER_LINK_SPEED_32G	32	/* 32 Gigabaud */
809 #define LPFC_USER_LINK_SPEED_64G	64	/* 64 Gigabaud */
810 #define LPFC_USER_LINK_SPEED_MAX	LPFC_USER_LINK_SPEED_64G
811 
812 #define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8, 10, 16, 32, 64"
813 
814 enum nemb_type {
815 	nemb_mse = 1,
816 	nemb_hbd
817 };
818 
819 enum mbox_type {
820 	mbox_rd = 1,
821 	mbox_wr
822 };
823 
824 enum dma_type {
825 	dma_mbox = 1,
826 	dma_ebuf
827 };
828 
829 enum sta_type {
830 	sta_pre_addr = 1,
831 	sta_pos_addr
832 };
833 
834 struct lpfc_mbox_ext_buf_ctx {
835 	uint32_t state;
836 #define LPFC_BSG_MBOX_IDLE		0
837 #define LPFC_BSG_MBOX_HOST              1
838 #define LPFC_BSG_MBOX_PORT		2
839 #define LPFC_BSG_MBOX_DONE		3
840 #define LPFC_BSG_MBOX_ABTS		4
841 	enum nemb_type nembType;
842 	enum mbox_type mboxType;
843 	uint32_t numBuf;
844 	uint32_t mbxTag;
845 	uint32_t seqNum;
846 	struct lpfc_dmabuf *mbx_dmabuf;
847 	struct list_head ext_dmabuf_list;
848 };
849 
850 struct lpfc_epd_pool {
851 	/* Expedite pool */
852 	struct list_head list;
853 	u32 count;
854 	spinlock_t lock;	/* lock for expedite pool */
855 };
856 
857 enum ras_state {
858 	INACTIVE,
859 	REG_INPROGRESS,
860 	ACTIVE
861 };
862 
863 struct lpfc_ras_fwlog {
864 	uint8_t *fwlog_buff;
865 	uint32_t fw_buffcount; /* Buffer size posted to FW */
866 #define LPFC_RAS_BUFF_ENTERIES  16      /* Each entry can hold max of 64k */
867 #define LPFC_RAS_MAX_ENTRY_SIZE (64 * 1024)
868 #define LPFC_RAS_MIN_BUFF_POST_SIZE (256 * 1024)
869 #define LPFC_RAS_MAX_BUFF_POST_SIZE (1024 * 1024)
870 	uint32_t fw_loglevel; /* Log level set */
871 	struct lpfc_dmabuf lwpd;
872 	struct list_head fwlog_buff_list;
873 
874 	/* RAS support status on adapter */
875 	bool ras_hwsupport; /* RAS Support available on HW or not */
876 	bool ras_enabled;   /* Ras Enabled for the function */
877 #define LPFC_RAS_DISABLE_LOGGING 0x00
878 #define LPFC_RAS_ENABLE_LOGGING 0x01
879 	enum ras_state state;    /* RAS logging running state */
880 };
881 
882 #define DBG_LOG_STR_SZ 256
883 #define DBG_LOG_SZ 256
884 
885 struct dbg_log_ent {
886 	char log[DBG_LOG_STR_SZ];
887 	u64     t_ns;
888 };
889 
890 enum lpfc_irq_chann_mode {
891 	/* Assign IRQs to all possible cpus that have hardware queues */
892 	NORMAL_MODE,
893 
894 	/* Assign IRQs only to cpus on the same numa node as HBA */
895 	NUMA_MODE,
896 
897 	/* Assign IRQs only on non-hyperthreaded CPUs. This is the
898 	 * same as normal_mode, but assign IRQS only on physical CPUs.
899 	 */
900 	NHT_MODE,
901 };
902 
903 struct lpfc_hba {
904 	/* SCSI interface function jump table entries */
905 	struct lpfc_io_buf * (*lpfc_get_scsi_buf)
906 		(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
907 		struct scsi_cmnd *cmnd);
908 	int (*lpfc_scsi_prep_dma_buf)
909 		(struct lpfc_hba *, struct lpfc_io_buf *);
910 	void (*lpfc_scsi_unprep_dma_buf)
911 		(struct lpfc_hba *, struct lpfc_io_buf *);
912 	void (*lpfc_release_scsi_buf)
913 		(struct lpfc_hba *, struct lpfc_io_buf *);
914 	void (*lpfc_rampdown_queue_depth)
915 		(struct lpfc_hba *);
916 	void (*lpfc_scsi_prep_cmnd)
917 		(struct lpfc_vport *, struct lpfc_io_buf *,
918 		 struct lpfc_nodelist *);
919 	int (*lpfc_scsi_prep_cmnd_buf)
920 		(struct lpfc_vport *vport,
921 		 struct lpfc_io_buf *lpfc_cmd,
922 		 uint8_t tmo);
923 
924 	/* IOCB interface function jump table entries */
925 	int (*__lpfc_sli_issue_iocb)
926 		(struct lpfc_hba *, uint32_t,
927 		 struct lpfc_iocbq *, uint32_t);
928 	int (*__lpfc_sli_issue_fcp_io)
929 		(struct lpfc_hba *phba, uint32_t ring_number,
930 		 struct lpfc_iocbq *piocb, uint32_t flag);
931 	void (*__lpfc_sli_release_iocbq)(struct lpfc_hba *,
932 			 struct lpfc_iocbq *);
933 	int (*lpfc_hba_down_post)(struct lpfc_hba *phba);
934 	IOCB_t * (*lpfc_get_iocb_from_iocbq)
935 		(struct lpfc_iocbq *);
936 	void (*lpfc_scsi_cmd_iocb_cmpl)
937 		(struct lpfc_hba *, struct lpfc_iocbq *, struct lpfc_iocbq *);
938 
939 	/* MBOX interface function jump table entries */
940 	int (*lpfc_sli_issue_mbox)
941 		(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
942 
943 	/* Slow-path IOCB process function jump table entries */
944 	void (*lpfc_sli_handle_slow_ring_event)
945 		(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
946 		 uint32_t mask);
947 
948 	/* INIT device interface function jump table entries */
949 	int (*lpfc_sli_hbq_to_firmware)
950 		(struct lpfc_hba *, uint32_t, struct hbq_dmabuf *);
951 	int (*lpfc_sli_brdrestart)
952 		(struct lpfc_hba *);
953 	int (*lpfc_sli_brdready)
954 		(struct lpfc_hba *, uint32_t);
955 	void (*lpfc_handle_eratt)
956 		(struct lpfc_hba *);
957 	void (*lpfc_stop_port)
958 		(struct lpfc_hba *);
959 	int (*lpfc_hba_init_link)
960 		(struct lpfc_hba *, uint32_t);
961 	int (*lpfc_hba_down_link)
962 		(struct lpfc_hba *, uint32_t);
963 	int (*lpfc_selective_reset)
964 		(struct lpfc_hba *);
965 
966 	int (*lpfc_bg_scsi_prep_dma_buf)
967 		(struct lpfc_hba *, struct lpfc_io_buf *);
968 	/* Add new entries here */
969 
970 	/* expedite pool */
971 	struct lpfc_epd_pool epd_pool;
972 
973 	/* SLI4 specific HBA data structure */
974 	struct lpfc_sli4_hba sli4_hba;
975 
976 	struct workqueue_struct *wq;
977 	struct delayed_work     eq_delay_work;
978 
979 #define LPFC_IDLE_STAT_DELAY 1000
980 	struct delayed_work	idle_stat_delay_work;
981 
982 	struct lpfc_sli sli;
983 	uint8_t pci_dev_grp;	/* lpfc PCI dev group: 0x0, 0x1, 0x2,... */
984 	uint32_t sli_rev;		/* SLI2, SLI3, or SLI4 */
985 	uint32_t sli3_options;		/* Mask of enabled SLI3 options */
986 #define LPFC_SLI3_HBQ_ENABLED		0x01
987 #define LPFC_SLI3_NPIV_ENABLED		0x02
988 #define LPFC_SLI3_VPORT_TEARDOWN	0x04
989 #define LPFC_SLI3_CRP_ENABLED		0x08
990 #define LPFC_SLI3_BG_ENABLED		0x20
991 #define LPFC_SLI3_DSS_ENABLED		0x40
992 #define LPFC_SLI4_PERFH_ENABLED		0x80
993 #define LPFC_SLI4_PHWQ_ENABLED		0x100
994 	uint32_t iocb_cmd_size;
995 	uint32_t iocb_rsp_size;
996 
997 	struct lpfc_trunk_link  trunk_link;
998 	enum hba_state link_state;
999 	uint32_t link_flag;	/* link state flags */
1000 #define LS_LOOPBACK_MODE      0x1	/* NPort is in Loopback mode */
1001 					/* This flag is set while issuing */
1002 					/* INIT_LINK mailbox command */
1003 #define LS_NPIV_FAB_SUPPORTED 0x2	/* Fabric supports NPIV */
1004 #define LS_IGNORE_ERATT       0x4	/* intr handler should ignore ERATT */
1005 #define LS_MDS_LINK_DOWN      0x8	/* MDS Diagnostics Link Down */
1006 #define LS_MDS_LOOPBACK       0x10	/* MDS Diagnostics Link Up (Loopback) */
1007 #define LS_CT_VEN_RPA         0x20	/* Vendor RPA sent to switch */
1008 
1009 	uint32_t hba_flag;	/* hba generic flags */
1010 #define HBA_ERATT_HANDLED	0x1 /* This flag is set when eratt handled */
1011 #define DEFER_ERATT		0x2 /* Deferred error attention in progress */
1012 #define HBA_FCOE_MODE		0x4 /* HBA function in FCoE Mode */
1013 #define HBA_SP_QUEUE_EVT	0x8 /* Slow-path qevt posted to worker thread*/
1014 #define HBA_POST_RECEIVE_BUFFER 0x10 /* Rcv buffers need to be posted */
1015 #define HBA_PERSISTENT_TOPO	0x20 /* Persistent topology support in hba */
1016 #define ELS_XRI_ABORT_EVENT	0x40 /* ELS_XRI abort event was queued */
1017 #define ASYNC_EVENT		0x80
1018 #define LINK_DISABLED		0x100 /* Link disabled by user */
1019 #define FCF_TS_INPROG           0x200 /* FCF table scan in progress */
1020 #define FCF_RR_INPROG           0x400 /* FCF roundrobin flogi in progress */
1021 #define HBA_FIP_SUPPORT		0x800 /* FIP support in HBA */
1022 #define HBA_AER_ENABLED		0x1000 /* AER enabled with HBA */
1023 #define HBA_DEVLOSS_TMO         0x2000 /* HBA in devloss timeout */
1024 #define HBA_RRQ_ACTIVE		0x4000 /* process the rrq active list */
1025 #define HBA_IOQ_FLUSH		0x8000 /* FCP/NVME I/O queues being flushed */
1026 #define HBA_FW_DUMP_OP		0x10000 /* Skips fn reset before FW dump */
1027 #define HBA_RECOVERABLE_UE	0x20000 /* Firmware supports recoverable UE */
1028 #define HBA_FORCED_LINK_SPEED	0x40000 /*
1029 					 * Firmware supports Forced Link Speed
1030 					 * capability
1031 					 */
1032 #define HBA_PCI_ERR		0x80000 /* The PCI slot is offline */
1033 #define HBA_FLOGI_ISSUED	0x100000 /* FLOGI was issued */
1034 #define HBA_CGN_RSVD1		0x200000 /* Reserved CGN flag */
1035 #define HBA_CGN_DAY_WRAP	0x400000 /* HBA Congestion info day wraps */
1036 #define HBA_DEFER_FLOGI		0x800000 /* Defer FLOGI till read_sparm cmpl */
1037 #define HBA_SETUP		0x1000000 /* Signifies HBA setup is completed */
1038 #define HBA_NEEDS_CFG_PORT	0x2000000 /* SLI3 - needs a CONFIG_PORT mbox */
1039 #define HBA_HBEAT_INP		0x4000000 /* mbox HBEAT is in progress */
1040 #define HBA_HBEAT_TMO		0x8000000 /* HBEAT initiated after timeout */
1041 #define HBA_FLOGI_OUTSTANDING	0x10000000 /* FLOGI is outstanding */
1042 
1043 	uint32_t fcp_ring_in_use; /* When polling test if intr-hndlr active*/
1044 	struct lpfc_dmabuf slim2p;
1045 
1046 	MAILBOX_t *mbox;
1047 	uint32_t *mbox_ext;
1048 	struct lpfc_mbox_ext_buf_ctx mbox_ext_buf_ctx;
1049 	uint32_t ha_copy;
1050 	struct _PCB *pcb;
1051 	struct _IOCB *IOCBs;
1052 
1053 	struct lpfc_dmabuf hbqslimp;
1054 
1055 	uint16_t pci_cfg_value;
1056 
1057 	uint8_t fc_linkspeed;	/* Link speed after last READ_LA */
1058 
1059 	uint32_t fc_eventTag;	/* event tag for link attention */
1060 	uint32_t link_events;
1061 
1062 	/* These fields used to be binfo */
1063 	uint32_t fc_pref_DID;	/* preferred D_ID */
1064 	uint8_t  fc_pref_ALPA;	/* preferred AL_PA */
1065 	uint32_t fc_edtovResol; /* E_D_TOV timer resolution */
1066 	uint32_t fc_edtov;	/* E_D_TOV timer value */
1067 	uint32_t fc_arbtov;	/* ARB_TOV timer value */
1068 	uint32_t fc_ratov;	/* R_A_TOV timer value */
1069 	uint32_t fc_rttov;	/* R_T_TOV timer value */
1070 	uint32_t fc_altov;	/* AL_TOV timer value */
1071 	uint32_t fc_crtov;	/* C_R_TOV timer value */
1072 
1073 	struct serv_parm fc_fabparam;	/* fabric service parameters buffer */
1074 	uint8_t alpa_map[128];	/* AL_PA map from READ_LA */
1075 
1076 	uint32_t lmt;
1077 
1078 	uint32_t fc_topology;	/* link topology, from LINK INIT */
1079 	uint32_t fc_topology_changed;	/* link topology, from LINK INIT */
1080 
1081 	struct lpfc_stats fc_stat;
1082 
1083 	struct lpfc_nodelist fc_fcpnodev; /* nodelist entry for no device */
1084 	uint32_t nport_event_cnt;	/* timestamp for nlplist entry */
1085 
1086 	uint8_t  wwnn[8];
1087 	uint8_t  wwpn[8];
1088 	uint32_t RandomData[7];
1089 	uint8_t  fcp_embed_io;
1090 	uint8_t  nvmet_support;	/* driver supports NVMET */
1091 #define LPFC_NVMET_MAX_PORTS	32
1092 	uint8_t  mds_diags_support;
1093 	uint8_t  bbcredit_support;
1094 	uint8_t  enab_exp_wqcq_pages;
1095 	u8	 nsler; /* Firmware supports FC-NVMe-2 SLER */
1096 
1097 	/* HBA Config Parameters */
1098 	uint32_t cfg_ack0;
1099 	uint32_t cfg_xri_rebalancing;
1100 	uint32_t cfg_xpsgl;
1101 	uint32_t cfg_enable_npiv;
1102 	uint32_t cfg_enable_rrq;
1103 	uint32_t cfg_topology;
1104 	uint32_t cfg_link_speed;
1105 #define LPFC_FCF_FOV 1		/* Fast fcf failover */
1106 #define LPFC_FCF_PRIORITY 2	/* Priority fcf failover */
1107 	uint32_t cfg_fcf_failover_policy;
1108 	uint32_t cfg_fcp_io_sched;
1109 	uint32_t cfg_ns_query;
1110 	uint32_t cfg_fcp2_no_tgt_reset;
1111 	uint32_t cfg_cr_delay;
1112 	uint32_t cfg_cr_count;
1113 	uint32_t cfg_multi_ring_support;
1114 	uint32_t cfg_multi_ring_rctl;
1115 	uint32_t cfg_multi_ring_type;
1116 	uint32_t cfg_poll;
1117 	uint32_t cfg_poll_tmo;
1118 	uint32_t cfg_task_mgmt_tmo;
1119 	uint32_t cfg_use_msi;
1120 	uint32_t cfg_auto_imax;
1121 	uint32_t cfg_fcp_imax;
1122 	uint32_t cfg_force_rscn;
1123 	uint32_t cfg_cq_poll_threshold;
1124 	uint32_t cfg_cq_max_proc_limit;
1125 	uint32_t cfg_fcp_cpu_map;
1126 	uint32_t cfg_fcp_mq_threshold;
1127 	uint32_t cfg_hdw_queue;
1128 	uint32_t cfg_irq_chann;
1129 	uint32_t cfg_suppress_rsp;
1130 	uint32_t cfg_nvme_oas;
1131 	uint32_t cfg_nvme_embed_cmd;
1132 	uint32_t cfg_nvmet_mrq_post;
1133 	uint32_t cfg_nvmet_mrq;
1134 	uint32_t cfg_enable_nvmet;
1135 	uint32_t cfg_nvme_enable_fb;
1136 	uint32_t cfg_nvmet_fb_size;
1137 	uint32_t cfg_total_seg_cnt;
1138 	uint32_t cfg_sg_seg_cnt;
1139 	uint32_t cfg_nvme_seg_cnt;
1140 	uint32_t cfg_scsi_seg_cnt;
1141 	uint32_t cfg_sg_dma_buf_size;
1142 	uint64_t cfg_soft_wwnn;
1143 	uint64_t cfg_soft_wwpn;
1144 	uint32_t cfg_hba_queue_depth;
1145 	uint32_t cfg_enable_hba_reset;
1146 	uint32_t cfg_enable_hba_heartbeat;
1147 	uint32_t cfg_fof;
1148 	uint32_t cfg_EnableXLane;
1149 	uint8_t cfg_oas_tgt_wwpn[8];
1150 	uint8_t cfg_oas_vpt_wwpn[8];
1151 	uint32_t cfg_oas_lun_state;
1152 #define OAS_LUN_ENABLE	1
1153 #define OAS_LUN_DISABLE	0
1154 	uint32_t cfg_oas_lun_status;
1155 #define OAS_LUN_STATUS_EXISTS	0x01
1156 	uint32_t cfg_oas_flags;
1157 #define OAS_FIND_ANY_VPORT	0x01
1158 #define OAS_FIND_ANY_TARGET	0x02
1159 #define OAS_LUN_VALID	0x04
1160 	uint32_t cfg_oas_priority;
1161 	uint32_t cfg_XLanePriority;
1162 	uint32_t cfg_enable_bg;
1163 	uint32_t cfg_prot_mask;
1164 	uint32_t cfg_prot_guard;
1165 	uint32_t cfg_hostmem_hgp;
1166 	uint32_t cfg_log_verbose;
1167 	uint32_t cfg_enable_fc4_type;
1168 	uint32_t cfg_aer_support;
1169 	uint32_t cfg_sriov_nr_virtfn;
1170 	uint32_t cfg_request_firmware_upgrade;
1171 	uint32_t cfg_suppress_link_up;
1172 	uint32_t cfg_rrq_xri_bitmap_sz;
1173 	u32      cfg_fcp_wait_abts_rsp;
1174 	uint32_t cfg_delay_discovery;
1175 	uint32_t cfg_sli_mode;
1176 #define LPFC_INITIALIZE_LINK              0	/* do normal init_link mbox */
1177 #define LPFC_DELAY_INIT_LINK              1	/* layered driver hold off */
1178 #define LPFC_DELAY_INIT_LINK_INDEFINITELY 2	/* wait, manual intervention */
1179 	uint32_t cfg_fdmi_on;
1180 #define LPFC_FDMI_NO_SUPPORT	0	/* FDMI not supported */
1181 #define LPFC_FDMI_SUPPORT	1	/* FDMI supported? */
1182 	uint32_t cfg_enable_SmartSAN;
1183 	uint32_t cfg_enable_mds_diags;
1184 	uint32_t cfg_ras_fwlog_level;
1185 	uint32_t cfg_ras_fwlog_buffsize;
1186 	uint32_t cfg_ras_fwlog_func;
1187 	uint32_t cfg_enable_bbcr;	/* Enable BB Credit Recovery */
1188 	uint32_t cfg_enable_dpp;	/* Enable Direct Packet Push */
1189 #define LPFC_ENABLE_FCP  1
1190 #define LPFC_ENABLE_NVME 2
1191 #define LPFC_ENABLE_BOTH 3
1192 	uint32_t cfg_enable_pbde;
1193 	uint32_t cfg_enable_mi;
1194 	struct nvmet_fc_target_port *targetport;
1195 	lpfc_vpd_t vpd;		/* vital product data */
1196 
1197 	u32 cfg_max_vmid;	/* maximum VMIDs allowed per port */
1198 	u32 cfg_vmid_app_header;
1199 #define LPFC_VMID_APP_HEADER_DISABLE	0
1200 #define LPFC_VMID_APP_HEADER_ENABLE	1
1201 	u32 cfg_vmid_priority_tagging;
1202 	u32 cfg_vmid_inactivity_timeout;	/* Time after which the VMID */
1203 						/* deregisters from switch */
1204 	struct pci_dev *pcidev;
1205 	struct list_head      work_list;
1206 	uint32_t              work_ha;      /* Host Attention Bits for WT */
1207 	uint32_t              work_ha_mask; /* HA Bits owned by WT        */
1208 	uint32_t              work_hs;      /* HS stored in case of ERRAT */
1209 	uint32_t              work_status[2]; /* Extra status from SLIM */
1210 
1211 	wait_queue_head_t    work_waitq;
1212 	struct task_struct   *worker_thread;
1213 	unsigned long data_flags;
1214 	uint32_t border_sge_num;
1215 
1216 	uint32_t hbq_in_use;		/* HBQs in use flag */
1217 	uint32_t hbq_count;	        /* Count of configured HBQs */
1218 	struct hbq_s hbqs[LPFC_MAX_HBQS]; /* local copy of hbq indicies  */
1219 
1220 	atomic_t fcp_qidx;         /* next FCP WQ (RR Policy) */
1221 	atomic_t nvme_qidx;        /* next NVME WQ (RR Policy) */
1222 
1223 	phys_addr_t pci_bar0_map;     /* Physical address for PCI BAR0 */
1224 	phys_addr_t pci_bar1_map;     /* Physical address for PCI BAR1 */
1225 	phys_addr_t pci_bar2_map;     /* Physical address for PCI BAR2 */
1226 	void __iomem *slim_memmap_p;	/* Kernel memory mapped address for
1227 					   PCI BAR0 */
1228 	void __iomem *ctrl_regs_memmap_p;/* Kernel memory mapped address for
1229 					    PCI BAR2 */
1230 
1231 	void __iomem *pci_bar0_memmap_p; /* Kernel memory mapped address for
1232 					    PCI BAR0 with dual-ULP support */
1233 	void __iomem *pci_bar2_memmap_p; /* Kernel memory mapped address for
1234 					    PCI BAR2 with dual-ULP support */
1235 	void __iomem *pci_bar4_memmap_p; /* Kernel memory mapped address for
1236 					    PCI BAR4 with dual-ULP support */
1237 #define PCI_64BIT_BAR0	0
1238 #define PCI_64BIT_BAR2	2
1239 #define PCI_64BIT_BAR4	4
1240 	void __iomem *MBslimaddr;	/* virtual address for mbox cmds */
1241 	void __iomem *HAregaddr;	/* virtual address for host attn reg */
1242 	void __iomem *CAregaddr;	/* virtual address for chip attn reg */
1243 	void __iomem *HSregaddr;	/* virtual address for host status
1244 					   reg */
1245 	void __iomem *HCregaddr;	/* virtual address for host ctl reg */
1246 
1247 	struct lpfc_hgp __iomem *host_gp; /* Host side get/put pointers */
1248 	struct lpfc_pgp   *port_gp;
1249 	uint32_t __iomem  *hbq_put;     /* Address in SLIM to HBQ put ptrs */
1250 	uint32_t          *hbq_get;     /* Host mem address of HBQ get ptrs */
1251 
1252 	int brd_no;			/* FC board number */
1253 	char SerialNumber[32];		/* adapter Serial Number */
1254 	char OptionROMVersion[32];	/* adapter BIOS / Fcode version */
1255 	char BIOSVersion[16];		/* Boot BIOS version */
1256 	char ModelDesc[256];		/* Model Description */
1257 	char ModelName[80];		/* Model Name */
1258 	char ProgramType[256];		/* Program Type */
1259 	char Port[20];			/* Port No */
1260 	uint8_t vpd_flag;               /* VPD data flag */
1261 
1262 #define VPD_MODEL_DESC      0x1         /* valid vpd model description */
1263 #define VPD_MODEL_NAME      0x2         /* valid vpd model name */
1264 #define VPD_PROGRAM_TYPE    0x4         /* valid vpd program type */
1265 #define VPD_PORT            0x8         /* valid vpd port data */
1266 #define VPD_MASK            0xf         /* mask for any vpd data */
1267 
1268 	uint8_t soft_wwn_enable;
1269 
1270 	struct timer_list fcp_poll_timer;
1271 	struct timer_list eratt_poll;
1272 	uint32_t eratt_poll_interval;
1273 
1274 	uint64_t bg_guard_err_cnt;
1275 	uint64_t bg_apptag_err_cnt;
1276 	uint64_t bg_reftag_err_cnt;
1277 
1278 	/* fastpath list. */
1279 	spinlock_t scsi_buf_list_get_lock;  /* SCSI buf alloc list lock */
1280 	spinlock_t scsi_buf_list_put_lock;  /* SCSI buf free list lock */
1281 	struct list_head lpfc_scsi_buf_list_get;
1282 	struct list_head lpfc_scsi_buf_list_put;
1283 	uint32_t total_scsi_bufs;
1284 	struct list_head lpfc_iocb_list;
1285 	uint32_t total_iocbq_bufs;
1286 	struct list_head active_rrq_list;
1287 	spinlock_t hbalock;
1288 	struct work_struct  unblock_request_work; /* SCSI layer unblock IOs */
1289 
1290 	/* dma_mem_pools */
1291 	struct dma_pool *lpfc_sg_dma_buf_pool;
1292 	struct dma_pool *lpfc_mbuf_pool;
1293 	struct dma_pool *lpfc_hrb_pool;	/* header receive buffer pool */
1294 	struct dma_pool *lpfc_drb_pool; /* data receive buffer pool */
1295 	struct dma_pool *lpfc_nvmet_drb_pool; /* data receive buffer pool */
1296 	struct dma_pool *lpfc_hbq_pool;	/* SLI3 hbq buffer pool */
1297 	struct dma_pool *lpfc_cmd_rsp_buf_pool;
1298 	struct lpfc_dma_pool lpfc_mbuf_safety_pool;
1299 
1300 	mempool_t *mbox_mem_pool;
1301 	mempool_t *nlp_mem_pool;
1302 	mempool_t *rrq_pool;
1303 	mempool_t *active_rrq_pool;
1304 
1305 	struct fc_host_statistics link_stats;
1306 	enum lpfc_irq_chann_mode irq_chann_mode;
1307 	enum intr_type_t intr_type;
1308 	uint32_t intr_mode;
1309 #define LPFC_INTR_ERROR	0xFFFFFFFF
1310 	struct list_head port_list;
1311 	spinlock_t port_list_lock;	/* lock for port_list mutations */
1312 	struct lpfc_vport *pport;	/* physical lpfc_vport pointer */
1313 	uint16_t max_vpi;		/* Maximum virtual nports */
1314 #define LPFC_MAX_VPI	0xFF		/* Max number VPI supported 0 - 0xff */
1315 #define LPFC_MAX_VPORTS	0x100		/* Max vports per port, with pport */
1316 	uint16_t max_vports;            /*
1317 					 * For IOV HBAs max_vpi can change
1318 					 * after a reset. max_vports is max
1319 					 * number of vports present. This can
1320 					 * be greater than max_vpi.
1321 					 */
1322 	uint16_t vpi_base;
1323 	uint16_t vfi_base;
1324 	unsigned long *vpi_bmask;	/* vpi allocation table */
1325 	uint16_t *vpi_ids;
1326 	uint16_t vpi_count;
1327 	struct list_head lpfc_vpi_blk_list;
1328 
1329 	/* Data structure used by fabric iocb scheduler */
1330 	struct list_head fabric_iocb_list;
1331 	atomic_t fabric_iocb_count;
1332 	struct timer_list fabric_block_timer;
1333 	unsigned long bit_flags;
1334 #define	FABRIC_COMANDS_BLOCKED	0
1335 	atomic_t num_rsrc_err;
1336 	atomic_t num_cmd_success;
1337 	unsigned long last_rsrc_error_time;
1338 	unsigned long last_ramp_down_time;
1339 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1340 	struct dentry *hba_debugfs_root;
1341 	atomic_t debugfs_vport_count;
1342 	struct dentry *debug_multixri_pools;
1343 	struct dentry *debug_hbqinfo;
1344 	struct dentry *debug_dumpHostSlim;
1345 	struct dentry *debug_dumpHBASlim;
1346 	struct dentry *debug_InjErrLBA;  /* LBA to inject errors at */
1347 	struct dentry *debug_InjErrNPortID;  /* NPortID to inject errors at */
1348 	struct dentry *debug_InjErrWWPN;  /* WWPN to inject errors at */
1349 	struct dentry *debug_writeGuard; /* inject write guard_tag errors */
1350 	struct dentry *debug_writeApp;   /* inject write app_tag errors */
1351 	struct dentry *debug_writeRef;   /* inject write ref_tag errors */
1352 	struct dentry *debug_readGuard;  /* inject read guard_tag errors */
1353 	struct dentry *debug_readApp;    /* inject read app_tag errors */
1354 	struct dentry *debug_readRef;    /* inject read ref_tag errors */
1355 
1356 	struct dentry *debug_nvmeio_trc;
1357 	struct lpfc_debugfs_nvmeio_trc *nvmeio_trc;
1358 	struct dentry *debug_hdwqinfo;
1359 #ifdef LPFC_HDWQ_LOCK_STAT
1360 	struct dentry *debug_lockstat;
1361 #endif
1362 	struct dentry *debug_cgn_buffer;
1363 	struct dentry *debug_rx_monitor;
1364 	struct dentry *debug_ras_log;
1365 	atomic_t nvmeio_trc_cnt;
1366 	uint32_t nvmeio_trc_size;
1367 	uint32_t nvmeio_trc_output_idx;
1368 
1369 	/* T10 DIF error injection */
1370 	uint32_t lpfc_injerr_wgrd_cnt;
1371 	uint32_t lpfc_injerr_wapp_cnt;
1372 	uint32_t lpfc_injerr_wref_cnt;
1373 	uint32_t lpfc_injerr_rgrd_cnt;
1374 	uint32_t lpfc_injerr_rapp_cnt;
1375 	uint32_t lpfc_injerr_rref_cnt;
1376 	uint32_t lpfc_injerr_nportid;
1377 	struct lpfc_name lpfc_injerr_wwpn;
1378 	sector_t lpfc_injerr_lba;
1379 #define LPFC_INJERR_LBA_OFF	(sector_t)(-1)
1380 
1381 	struct dentry *debug_slow_ring_trc;
1382 	struct lpfc_debugfs_trc *slow_ring_trc;
1383 	atomic_t slow_ring_trc_cnt;
1384 	/* iDiag debugfs sub-directory */
1385 	struct dentry *idiag_root;
1386 	struct dentry *idiag_pci_cfg;
1387 	struct dentry *idiag_bar_acc;
1388 	struct dentry *idiag_que_info;
1389 	struct dentry *idiag_que_acc;
1390 	struct dentry *idiag_drb_acc;
1391 	struct dentry *idiag_ctl_acc;
1392 	struct dentry *idiag_mbx_acc;
1393 	struct dentry *idiag_ext_acc;
1394 	uint8_t lpfc_idiag_last_eq;
1395 #endif
1396 	uint16_t nvmeio_trc_on;
1397 
1398 	/* Used for deferred freeing of ELS data buffers */
1399 	struct list_head elsbuf;
1400 	int elsbuf_cnt;
1401 	int elsbuf_prev_cnt;
1402 
1403 	uint8_t temp_sensor_support;
1404 	/* Fields used for heart beat. */
1405 	unsigned long last_completion_time;
1406 	unsigned long skipped_hb;
1407 	struct timer_list hb_tmofunc;
1408 	struct timer_list rrq_tmr;
1409 	enum hba_temp_state over_temp_state;
1410 	/*
1411 	 * Following bit will be set for all buffer tags which are not
1412 	 * associated with any HBQ.
1413 	 */
1414 #define QUE_BUFTAG_BIT  (1<<31)
1415 	uint32_t buffer_tag_count;
1416 	int wait_4_mlo_maint_flg;
1417 	wait_queue_head_t wait_4_mlo_m_q;
1418 	/* data structure used for latency data collection */
1419 #define LPFC_NO_BUCKET	   0
1420 #define LPFC_LINEAR_BUCKET 1
1421 #define LPFC_POWER2_BUCKET 2
1422 	uint8_t  bucket_type;
1423 	uint32_t bucket_base;
1424 	uint32_t bucket_step;
1425 
1426 /* Maximum number of events that can be outstanding at any time*/
1427 #define LPFC_MAX_EVT_COUNT 512
1428 	atomic_t fast_event_count;
1429 	uint32_t fcoe_eventtag;
1430 	uint32_t fcoe_eventtag_at_fcf_scan;
1431 	uint32_t fcoe_cvl_eventtag;
1432 	uint32_t fcoe_cvl_eventtag_attn;
1433 	struct lpfc_fcf fcf;
1434 	uint8_t fc_map[3];
1435 	uint8_t valid_vlan;
1436 	uint16_t vlan_id;
1437 	struct list_head fcf_conn_rec_list;
1438 
1439 	bool defer_flogi_acc_flag;
1440 	uint16_t defer_flogi_acc_rx_id;
1441 	uint16_t defer_flogi_acc_ox_id;
1442 
1443 	spinlock_t ct_ev_lock; /* synchronize access to ct_ev_waiters */
1444 	struct list_head ct_ev_waiters;
1445 	struct unsol_rcv_ct_ctx ct_ctx[LPFC_CT_CTX_MAX];
1446 	uint32_t ctx_idx;
1447 	struct timer_list inactive_vmid_poll;
1448 
1449 	/* RAS Support */
1450 	struct lpfc_ras_fwlog ras_fwlog;
1451 
1452 	uint8_t menlo_flag;	/* menlo generic flags */
1453 #define HBA_MENLO_SUPPORT	0x1 /* HBA supports menlo commands */
1454 	uint32_t iocb_cnt;
1455 	uint32_t iocb_max;
1456 	atomic_t sdev_cnt;
1457 	spinlock_t devicelock;	/* lock for luns list */
1458 	mempool_t *device_data_mem_pool;
1459 	struct list_head luns;
1460 #define LPFC_TRANSGRESSION_HIGH_TEMPERATURE	0x0080
1461 #define LPFC_TRANSGRESSION_LOW_TEMPERATURE	0x0040
1462 #define LPFC_TRANSGRESSION_HIGH_VOLTAGE		0x0020
1463 #define LPFC_TRANSGRESSION_LOW_VOLTAGE		0x0010
1464 #define LPFC_TRANSGRESSION_HIGH_TXBIAS		0x0008
1465 #define LPFC_TRANSGRESSION_LOW_TXBIAS		0x0004
1466 #define LPFC_TRANSGRESSION_HIGH_TXPOWER		0x0002
1467 #define LPFC_TRANSGRESSION_LOW_TXPOWER		0x0001
1468 #define LPFC_TRANSGRESSION_HIGH_RXPOWER		0x8000
1469 #define LPFC_TRANSGRESSION_LOW_RXPOWER		0x4000
1470 	uint16_t sfp_alarm;
1471 	uint16_t sfp_warning;
1472 
1473 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1474 	uint16_t hdwqstat_on;
1475 #define LPFC_CHECK_OFF		0
1476 #define LPFC_CHECK_NVME_IO	1
1477 #define LPFC_CHECK_NVMET_IO	2
1478 #define LPFC_CHECK_SCSI_IO	4
1479 	uint16_t ktime_on;
1480 	uint64_t ktime_data_samples;
1481 	uint64_t ktime_status_samples;
1482 	uint64_t ktime_last_cmd;
1483 	uint64_t ktime_seg1_total;
1484 	uint64_t ktime_seg1_min;
1485 	uint64_t ktime_seg1_max;
1486 	uint64_t ktime_seg2_total;
1487 	uint64_t ktime_seg2_min;
1488 	uint64_t ktime_seg2_max;
1489 	uint64_t ktime_seg3_total;
1490 	uint64_t ktime_seg3_min;
1491 	uint64_t ktime_seg3_max;
1492 	uint64_t ktime_seg4_total;
1493 	uint64_t ktime_seg4_min;
1494 	uint64_t ktime_seg4_max;
1495 	uint64_t ktime_seg5_total;
1496 	uint64_t ktime_seg5_min;
1497 	uint64_t ktime_seg5_max;
1498 	uint64_t ktime_seg6_total;
1499 	uint64_t ktime_seg6_min;
1500 	uint64_t ktime_seg6_max;
1501 	uint64_t ktime_seg7_total;
1502 	uint64_t ktime_seg7_min;
1503 	uint64_t ktime_seg7_max;
1504 	uint64_t ktime_seg8_total;
1505 	uint64_t ktime_seg8_min;
1506 	uint64_t ktime_seg8_max;
1507 	uint64_t ktime_seg9_total;
1508 	uint64_t ktime_seg9_min;
1509 	uint64_t ktime_seg9_max;
1510 	uint64_t ktime_seg10_total;
1511 	uint64_t ktime_seg10_min;
1512 	uint64_t ktime_seg10_max;
1513 #endif
1514 	/* CMF objects */
1515 	struct lpfc_cgn_stat __percpu *cmf_stat;
1516 	uint32_t cmf_interval_rate;  /* timer interval limit in ms */
1517 	uint32_t cmf_timer_cnt;
1518 #define LPFC_CMF_INTERVAL 90
1519 	uint64_t cmf_link_byte_count;
1520 	uint64_t cmf_max_line_rate;
1521 	uint64_t cmf_max_bytes_per_interval;
1522 	uint64_t cmf_last_sync_bw;
1523 #define  LPFC_CMF_BLK_SIZE 512
1524 	struct hrtimer cmf_timer;
1525 	atomic_t cmf_bw_wait;
1526 	atomic_t cmf_busy;
1527 	atomic_t cmf_stop_io;      /* To block request and stop IO's */
1528 	uint32_t cmf_active_mode;
1529 	uint32_t cmf_info_per_interval;
1530 #define LPFC_MAX_CMF_INFO 32
1531 	struct timespec64 cmf_latency;  /* Interval congestion timestamp */
1532 	uint32_t cmf_last_ts;   /* Interval congestion time (ms) */
1533 	uint32_t cmf_active_info;
1534 
1535 	/* Signal / FPIN handling for Congestion Mgmt */
1536 	u8 cgn_reg_fpin;           /* Negotiated value from RDF */
1537 	u8 cgn_init_reg_fpin;      /* Initial value from READ_CONFIG */
1538 #define LPFC_CGN_FPIN_NONE	0x0
1539 #define LPFC_CGN_FPIN_WARN	0x1
1540 #define LPFC_CGN_FPIN_ALARM	0x2
1541 #define LPFC_CGN_FPIN_BOTH	(LPFC_CGN_FPIN_WARN | LPFC_CGN_FPIN_ALARM)
1542 
1543 	u8 cgn_reg_signal;          /* Negotiated value from EDC */
1544 	u8 cgn_init_reg_signal;     /* Initial value from READ_CONFIG */
1545 		/* cgn_reg_signal and cgn_init_reg_signal use
1546 		 * enum fc_edc_cg_signal_cap_types
1547 		 */
1548 	u16 cgn_fpin_frequency;
1549 #define LPFC_FPIN_INIT_FREQ	0xffff
1550 	u32 cgn_sig_freq;
1551 	u32 cgn_acqe_cnt;
1552 
1553 	/* RX monitor handling for CMF */
1554 	struct rxtable_entry *rxtable;  /* RX_monitor information */
1555 	atomic_t rxtable_idx_head;
1556 #define LPFC_RXMONITOR_TABLE_IN_USE     (LPFC_MAX_RXMONITOR_ENTRY + 73)
1557 	atomic_t rxtable_idx_tail;
1558 	atomic_t rx_max_read_cnt;       /* Maximum read bytes */
1559 	uint64_t rx_block_cnt;
1560 
1561 	/* Congestion parameters from flash */
1562 	struct lpfc_cgn_param cgn_p;
1563 
1564 	/* Statistics counter for ACQE cgn alarms and warnings */
1565 	struct lpfc_cgn_acqe_stat cgn_acqe_stat;
1566 
1567 	/* Congestion buffer information */
1568 	struct lpfc_dmabuf *cgn_i;      /* Congestion Info buffer */
1569 	atomic_t cgn_fabric_warn_cnt;   /* Total warning cgn events for info */
1570 	atomic_t cgn_fabric_alarm_cnt;  /* Total alarm cgn events for info */
1571 	atomic_t cgn_sync_warn_cnt;     /* Total warning events for SYNC wqe */
1572 	atomic_t cgn_sync_alarm_cnt;    /* Total alarm events for SYNC wqe */
1573 	atomic_t cgn_driver_evt_cnt;    /* Total driver cgn events for fmw */
1574 	atomic_t cgn_latency_evt_cnt;
1575 	struct timespec64 cgn_daily_ts;
1576 	atomic64_t cgn_latency_evt;     /* Avg latency per minute */
1577 	unsigned long cgn_evt_timestamp;
1578 #define LPFC_CGN_TIMER_TO_MIN   60000 /* ms in a minute */
1579 	uint32_t cgn_evt_minute;
1580 #define LPFC_SEC_MIN		60
1581 #define LPFC_MIN_HOUR		60
1582 #define LPFC_HOUR_DAY		24
1583 #define LPFC_MIN_DAY		(LPFC_MIN_HOUR * LPFC_HOUR_DAY)
1584 
1585 	struct hlist_node cpuhp;	/* used for cpuhp per hba callback */
1586 	struct timer_list cpuhp_poll_timer;
1587 	struct list_head poll_list;	/* slowpath eq polling list */
1588 #define LPFC_POLL_HB	1		/* slowpath heartbeat */
1589 #define LPFC_POLL_FASTPATH	0	/* called from fastpath */
1590 #define LPFC_POLL_SLOWPATH	1	/* called from slowpath */
1591 
1592 	char os_host_name[MAXHOSTNAMELEN];
1593 
1594 	/* SCSI host template information - for physical port */
1595 	struct scsi_host_template port_template;
1596 	/* SCSI host template information - for all vports */
1597 	struct scsi_host_template vport_template;
1598 	atomic_t dbg_log_idx;
1599 	atomic_t dbg_log_cnt;
1600 	atomic_t dbg_log_dmping;
1601 	struct dbg_log_ent dbg_log[DBG_LOG_SZ];
1602 };
1603 
1604 #define LPFC_MAX_RXMONITOR_ENTRY	800
1605 #define LPFC_MAX_RXMONITOR_DUMP		32
1606 struct rxtable_entry {
1607 	uint64_t total_bytes;   /* Total no of read bytes requested */
1608 	uint64_t rcv_bytes;     /* Total no of read bytes completed */
1609 	uint64_t avg_io_size;
1610 	uint64_t avg_io_latency;/* Average io latency in microseconds */
1611 	uint64_t max_read_cnt;  /* Maximum read bytes */
1612 	uint64_t max_bytes_per_interval;
1613 	uint32_t cmf_busy;
1614 	uint32_t cmf_info;      /* CMF_SYNC_WQE info */
1615 	uint32_t io_cnt;
1616 	uint32_t timer_utilization;
1617 	uint32_t timer_interval;
1618 };
1619 
1620 static inline struct Scsi_Host *
lpfc_shost_from_vport(struct lpfc_vport * vport)1621 lpfc_shost_from_vport(struct lpfc_vport *vport)
1622 {
1623 	return container_of((void *) vport, struct Scsi_Host, hostdata[0]);
1624 }
1625 
1626 static inline void
lpfc_set_loopback_flag(struct lpfc_hba * phba)1627 lpfc_set_loopback_flag(struct lpfc_hba *phba)
1628 {
1629 	if (phba->cfg_topology == FLAGS_LOCAL_LB)
1630 		phba->link_flag |= LS_LOOPBACK_MODE;
1631 	else
1632 		phba->link_flag &= ~LS_LOOPBACK_MODE;
1633 }
1634 
1635 static inline int
lpfc_is_link_up(struct lpfc_hba * phba)1636 lpfc_is_link_up(struct lpfc_hba *phba)
1637 {
1638 	return  phba->link_state == LPFC_LINK_UP ||
1639 		phba->link_state == LPFC_CLEAR_LA ||
1640 		phba->link_state == LPFC_HBA_READY;
1641 }
1642 
1643 static inline void
lpfc_worker_wake_up(struct lpfc_hba * phba)1644 lpfc_worker_wake_up(struct lpfc_hba *phba)
1645 {
1646 	/* Set the lpfc data pending flag */
1647 	set_bit(LPFC_DATA_READY, &phba->data_flags);
1648 
1649 	/* Wake up worker thread */
1650 	wake_up(&phba->work_waitq);
1651 	return;
1652 }
1653 
1654 static inline int
lpfc_readl(void __iomem * addr,uint32_t * data)1655 lpfc_readl(void __iomem *addr, uint32_t *data)
1656 {
1657 	uint32_t temp;
1658 	temp = readl(addr);
1659 	if (temp == 0xffffffff)
1660 		return -EIO;
1661 	*data = temp;
1662 	return 0;
1663 }
1664 
1665 static inline int
lpfc_sli_read_hs(struct lpfc_hba * phba)1666 lpfc_sli_read_hs(struct lpfc_hba *phba)
1667 {
1668 	/*
1669 	 * There was a link/board error. Read the status register to retrieve
1670 	 * the error event and process it.
1671 	 */
1672 	phba->sli.slistat.err_attn_event++;
1673 
1674 	/* Save status info and check for unplug error */
1675 	if (lpfc_readl(phba->HSregaddr, &phba->work_hs) ||
1676 		lpfc_readl(phba->MBslimaddr + 0xa8, &phba->work_status[0]) ||
1677 		lpfc_readl(phba->MBslimaddr + 0xac, &phba->work_status[1])) {
1678 		return -EIO;
1679 	}
1680 
1681 	/* Clear chip Host Attention error bit */
1682 	writel(HA_ERATT, phba->HAregaddr);
1683 	readl(phba->HAregaddr); /* flush */
1684 	phba->pport->stopped = 1;
1685 
1686 	return 0;
1687 }
1688 
1689 static inline struct lpfc_sli_ring *
lpfc_phba_elsring(struct lpfc_hba * phba)1690 lpfc_phba_elsring(struct lpfc_hba *phba)
1691 {
1692 	/* Return NULL if sli_rev has become invalid due to bad fw */
1693 	if (phba->sli_rev != LPFC_SLI_REV4  &&
1694 	    phba->sli_rev != LPFC_SLI_REV3  &&
1695 	    phba->sli_rev != LPFC_SLI_REV2)
1696 		return NULL;
1697 
1698 	if (phba->sli_rev == LPFC_SLI_REV4) {
1699 		if (phba->sli4_hba.els_wq)
1700 			return phba->sli4_hba.els_wq->pring;
1701 		else
1702 			return NULL;
1703 	}
1704 	return &phba->sli.sli3_ring[LPFC_ELS_RING];
1705 }
1706 
1707 /**
1708  * lpfc_next_online_cpu - Finds next online CPU on cpumask
1709  * @mask: Pointer to phba's cpumask member.
1710  * @start: starting cpu index
1711  *
1712  * Note: If no valid cpu found, then nr_cpu_ids is returned.
1713  *
1714  **/
1715 static inline unsigned int
lpfc_next_online_cpu(const struct cpumask * mask,unsigned int start)1716 lpfc_next_online_cpu(const struct cpumask *mask, unsigned int start)
1717 {
1718 	unsigned int cpu_it;
1719 
1720 	for_each_cpu_wrap(cpu_it, mask, start) {
1721 		if (cpu_online(cpu_it))
1722 			break;
1723 	}
1724 
1725 	return cpu_it;
1726 }
1727 /**
1728  * lpfc_sli4_mod_hba_eq_delay - update EQ delay
1729  * @phba: Pointer to HBA context object.
1730  * @q: The Event Queue to update.
1731  * @delay: The delay value (in us) to be written.
1732  *
1733  **/
1734 static inline void
lpfc_sli4_mod_hba_eq_delay(struct lpfc_hba * phba,struct lpfc_queue * eq,u32 delay)1735 lpfc_sli4_mod_hba_eq_delay(struct lpfc_hba *phba, struct lpfc_queue *eq,
1736 			   u32 delay)
1737 {
1738 	struct lpfc_register reg_data;
1739 
1740 	reg_data.word0 = 0;
1741 	bf_set(lpfc_sliport_eqdelay_id, &reg_data, eq->queue_id);
1742 	bf_set(lpfc_sliport_eqdelay_delay, &reg_data, delay);
1743 	writel(reg_data.word0, phba->sli4_hba.u.if_type2.EQDregaddr);
1744 	eq->q_mode = delay;
1745 }
1746 
1747 
1748 /*
1749  * Macro that declares tables and a routine to perform enum type to
1750  * ascii string lookup.
1751  *
1752  * Defines a <key,value> table for an enum. Uses xxx_INIT defines for
1753  * the enum to populate the table.  Macro defines a routine (named
1754  * by caller) that will search all elements of the table for the key
1755  * and return the name string if found or "Unrecognized" if not found.
1756  */
1757 #define DECLARE_ENUM2STR_LOOKUP(routine, enum_name, enum_init)		\
1758 static struct {								\
1759 	enum enum_name		value;					\
1760 	char			*name;					\
1761 } fc_##enum_name##_e2str_names[] = enum_init;				\
1762 static const char *routine(enum enum_name table_key)			\
1763 {									\
1764 	int i;								\
1765 	char *name = "Unrecognized";					\
1766 									\
1767 	for (i = 0; i < ARRAY_SIZE(fc_##enum_name##_e2str_names); i++) {\
1768 		if (fc_##enum_name##_e2str_names[i].value == table_key) {\
1769 			name = fc_##enum_name##_e2str_names[i].name;	\
1770 			break;						\
1771 		}							\
1772 	}								\
1773 	return name;							\
1774 }
1775 
1776 /**
1777  * lpfc_is_vmid_enabled - returns if VMID is enabled for either switch types
1778  * @phba: Pointer to HBA context object.
1779  *
1780  * Relationship between the enable, target support and if vmid tag is required
1781  * for the particular combination
1782  * ---------------------------------------------------
1783  * Switch    Enable Flag  Target Support  VMID Needed
1784  * ---------------------------------------------------
1785  * App Id     0              NA              N
1786  * App Id     1               0              N
1787  * App Id     1               1              Y
1788  * Pr Tag     0              NA              N
1789  * Pr Tag     1               0              N
1790  * Pr Tag     1               1              Y
1791  * Pr Tag     2               *              Y
1792  ---------------------------------------------------
1793  *
1794  **/
lpfc_is_vmid_enabled(struct lpfc_hba * phba)1795 static inline int lpfc_is_vmid_enabled(struct lpfc_hba *phba)
1796 {
1797 	return phba->cfg_vmid_app_header || phba->cfg_vmid_priority_tagging;
1798 }
1799