1
2Summary
3=======
4
5This README is about U-Boot support for SAMSUNG's/NEXELL's ARM Cortex-A9 based
6S5P4418 SoC. It is based on FriendlyARM's U-Boot v2016.01 for the NanoPi2
7(and other) boards [1].
8
9Currently the following boards are supported:
10
11* FriendlyArm NanoPi2   [2]
12* FriendlyArm NanoPC-T2 [3]
13
14
15Build
16=====
17
18* NanoPi2 and NanoPC-T2
19
20make s5p4418_nanopi2_defconfig
21make
22
23
24Installation
25============
26
27- Download Official-ROMs-SDCard-20190718.7z from [4] (images files for android,
28  friendlyCore and LUbuntu)
29- Use s5p4418-sd-lubuntu-desktop-xenial-4.4-armhf-20190718.img to make a SD-card
30- Use dd in the directory where U-Boot has been built to update U-Boot:
31  (replace <SD-card> with the device used for the SD-card, e.g. sdc)
32  sudo dd seek=3841 if=u-boot.bin of=/dev/<SD-card>
33- Boot the board from this SD-card
34
35The source code for (the used?) LUbuntu 16.04 can be found at [5].
36
37
38Links
39=====
40
41[1] FriendlyArm U-boot v2016.01:
42
43https://github.com/friendlyarm/u-boot/tree/nanopi2-v2016.01
44
45
46[2] NanoPi2:
47
48http://wiki.friendlyarm.com/wiki/index.php/NanoPi_2
49
50
51[3] NanoPC-T2:
52
53http://wiki.friendlyarm.com/wiki/index.php/NanoPC-T2
54
55
56[4] FriendlyArm image files for NanoPi2:
57
58http://download.friendlyarm.com//NanoPi2
59
60
61[5] FriendlyArm LUbuntu 16.04 Source Code for NanoPi2:
62
63https://github.com/friendlyarm/linux/tree/nanopi2-v4.4.y
64