1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Samsung's Exynos4412 based Trats 2 board device tree source 4 * 5 * Copyright (c) 2013 Samsung Electronics Co., Ltd. 6 * http://www.samsung.com 7 * 8 * Device tree source file for Samsung's Trats 2 board which is based on 9 * Samsung's Exynos4412 SoC. 10 */ 11 12/dts-v1/; 13#include "exynos4412.dtsi" 14#include "exynos4412-ppmu-common.dtsi" 15#include <dt-bindings/gpio/gpio.h> 16#include <dt-bindings/input/input.h> 17#include <dt-bindings/interrupt-controller/irq.h> 18#include <dt-bindings/clock/maxim,max77686.h> 19#include <dt-bindings/pinctrl/samsung.h> 20 21/ { 22 compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; 23 24 aliases { 25 i2c11 = &i2c_max77693; 26 i2c12 = &i2c_max77693_fuel; 27 }; 28 29 chosen { 30 stdout-path = &serial_2; 31 }; 32 33 firmware@204f000 { 34 compatible = "samsung,secure-firmware"; 35 reg = <0x0204F000 0x1000>; 36 }; 37 38 fixed-rate-clocks { 39 xxti { 40 compatible = "samsung,clock-xxti"; 41 clock-frequency = <0>; 42 }; 43 44 xusbxti { 45 compatible = "samsung,clock-xusbxti"; 46 clock-frequency = <24000000>; 47 }; 48 }; 49 50 cam_io_reg: voltage-regulator-1 { 51 compatible = "regulator-fixed"; 52 regulator-name = "CAM_SENSOR_A"; 53 regulator-min-microvolt = <2800000>; 54 regulator-max-microvolt = <2800000>; 55 enable-active-high; 56 status = "disabled"; 57 }; 58 59 cam_af_reg: voltage-regulator-2 { 60 compatible = "regulator-fixed"; 61 regulator-name = "CAM_AF"; 62 regulator-min-microvolt = <2800000>; 63 regulator-max-microvolt = <2800000>; 64 enable-active-high; 65 status = "disabled"; 66 }; 67 68 vsil12: voltage-regulator-3 { 69 compatible = "regulator-fixed"; 70 regulator-name = "VSIL_1.2V"; 71 regulator-min-microvolt = <1200000>; 72 regulator-max-microvolt = <1200000>; 73 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; 74 enable-active-high; 75 vin-supply = <&buck7_reg>; 76 }; 77 78 vcc33mhl: voltage-regulator-4 { 79 compatible = "regulator-fixed"; 80 regulator-name = "VCC_3.3_MHL"; 81 regulator-min-microvolt = <3300000>; 82 regulator-max-microvolt = <3300000>; 83 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; 84 enable-active-high; 85 }; 86 87 vcc18mhl: voltage-regulator-5 { 88 compatible = "regulator-fixed"; 89 regulator-name = "VCC_1.8_MHL"; 90 regulator-min-microvolt = <1800000>; 91 regulator-max-microvolt = <1800000>; 92 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; 93 enable-active-high; 94 }; 95 96 touchkey_reg: voltage-regulator-6 { 97 compatible = "regulator-fixed"; 98 regulator-name = "LED_VDD_3.3V"; 99 regulator-min-microvolt = <3300000>; 100 regulator-max-microvolt = <3300000>; 101 enable-active-high; 102 status = "disabled"; 103 }; 104 105 vbatt_reg: voltage-regulator-7 { 106 compatible = "regulator-fixed"; 107 regulator-name = "VBATT"; 108 regulator-min-microvolt = <5000000>; 109 regulator-max-microvolt = <5000000>; 110 regulator-always-on; 111 }; 112 113 mic_bias_reg: voltage-regulator-8 { 114 compatible = "regulator-fixed"; 115 regulator-name = "MICBIAS_LDO_2.8V"; 116 regulator-min-microvolt = <2800000>; 117 regulator-max-microvolt = <2800000>; 118 gpio = <&gpf1 7 GPIO_ACTIVE_HIGH>; 119 enable-active-high; 120 }; 121 122 submic_bias_reg: voltage-regulator-9 { 123 compatible = "regulator-fixed"; 124 regulator-name = "SUB_MICBIAS_LDO_2.8V"; 125 regulator-min-microvolt = <2800000>; 126 regulator-max-microvolt = <2800000>; 127 }; 128 129 gpio-keys { 130 compatible = "gpio-keys"; 131 pinctrl-names = "default"; 132 pinctrl-0 = <&gpio_keys>; 133 134 key-down { 135 gpios = <&gpx3 3 GPIO_ACTIVE_LOW>; 136 linux,code = <114>; 137 label = "volume down"; 138 debounce-interval = <10>; 139 }; 140 141 key-up { 142 gpios = <&gpx2 2 GPIO_ACTIVE_LOW>; 143 linux,code = <115>; 144 label = "volume up"; 145 debounce-interval = <10>; 146 }; 147 148 key-power { 149 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; 150 linux,code = <116>; 151 label = "power"; 152 debounce-interval = <10>; 153 wakeup-source; 154 }; 155 156 key-ok { 157 gpios = <&gpx0 1 GPIO_ACTIVE_LOW>; 158 linux,code = <139>; 159 label = "ok"; 160 debounce-interval = <10>; 161 wakeup-source; 162 }; 163 }; 164 165 i2c_max77693: i2c-gpio-1 { 166 compatible = "i2c-gpio"; 167 sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 168 scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 169 i2c-gpio,delay-us = <2>; 170 #address-cells = <1>; 171 #size-cells = <0>; 172 173 pmic@66 { 174 compatible = "maxim,max77693"; 175 interrupt-parent = <&gpx1>; 176 interrupts = <5 IRQ_TYPE_LEVEL_LOW>; 177 pinctrl-names = "default"; 178 pinctrl-0 = <&max77693_irq>; 179 reg = <0x66>; 180 181 regulators { 182 esafeout1_reg: ESAFEOUT1 { 183 regulator-name = "ESAFEOUT1"; 184 }; 185 esafeout2_reg: ESAFEOUT2 { 186 regulator-name = "ESAFEOUT2"; 187 }; 188 charger_reg: CHARGER { 189 regulator-name = "CHARGER"; 190 regulator-min-microamp = <60000>; 191 regulator-max-microamp = <2580000>; 192 }; 193 }; 194 195 motor-driver { 196 compatible = "maxim,max77693-haptic"; 197 haptic-supply = <&ldo26_reg>; 198 pwms = <&pwm 0 38022 0>; 199 }; 200 201 charger { 202 compatible = "maxim,max77693-charger"; 203 204 maxim,constant-microvolt = <4350000>; 205 maxim,min-system-microvolt = <3600000>; 206 maxim,thermal-regulation-celsius = <100>; 207 maxim,battery-overcurrent-microamp = <3500000>; 208 maxim,charge-input-threshold-microvolt = <4300000>; 209 }; 210 }; 211 }; 212 213 i2c_max77693_fuel: i2c-gpio-3 { 214 compatible = "i2c-gpio"; 215 sda-gpios = <&gpf1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 216 scl-gpios = <&gpf1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 217 i2c-gpio,delay-us = <2>; 218 #address-cells = <1>; 219 #size-cells = <0>; 220 221 fuel-gauge@36 { 222 compatible = "maxim,max17047"; 223 interrupt-parent = <&gpx2>; 224 interrupts = <3 IRQ_TYPE_LEVEL_LOW>; 225 pinctrl-names = "default"; 226 pinctrl-0 = <&max77693_fuel_irq>; 227 reg = <0x36>; 228 229 maxim,over-heat-temp = <700>; 230 maxim,over-volt = <4500>; 231 }; 232 }; 233 234 i2c-gpio-4 { 235 compatible = "i2c-gpio"; 236 sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 237 scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 238 i2c-gpio,delay-us = <2>; 239 #address-cells = <1>; 240 #size-cells = <0>; 241 242 touchkey@20 { 243 compatible = "cypress,midas-touchkey"; 244 reg = <0x20>; 245 vdd-supply = <&touchkey_reg>; 246 vcc-supply = <&ldo5_reg>; 247 interrupt-parent = <&gpj0>; 248 interrupts = <3 IRQ_TYPE_EDGE_FALLING>; 249 linux,keycodes = <KEY_BACK KEY_MENU>; 250 }; 251 }; 252 253 i2c-mhl { 254 compatible = "i2c-gpio"; 255 sda-gpios = <&gpf0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 256 scl-gpios = <&gpf0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 257 i2c-gpio,delay-us = <100>; 258 #address-cells = <1>; 259 #size-cells = <0>; 260 261 pinctrl-0 = <&i2c_mhl_bus>; 262 pinctrl-names = "default"; 263 264 sii9234: hdmi-bridge@39 { 265 compatible = "sil,sii9234"; 266 avcc33-supply = <&vcc33mhl>; 267 iovcc18-supply = <&vcc18mhl>; 268 avcc12-supply = <&vsil12>; 269 cvcc12-supply = <&vsil12>; 270 reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; 271 interrupt-parent = <&gpf3>; 272 interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; 273 reg = <0x39>; 274 275 port { 276 mhl_to_hdmi: endpoint { 277 remote-endpoint = <&hdmi_to_mhl>; 278 }; 279 }; 280 }; 281 }; 282 283 wlan_pwrseq: sdhci3-pwrseq { 284 compatible = "mmc-pwrseq-simple"; 285 reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>; 286 clocks = <&max77686 MAX77686_CLK_PMIC>; 287 clock-names = "ext_clock"; 288 }; 289 290 sound: sound { 291 compatible = "samsung,midas-audio"; 292 model = "Midas"; 293 mic-bias-supply = <&mic_bias_reg>; 294 submic-bias-supply = <&submic_bias_reg>; 295 296 cpu { 297 sound-dai = <&i2s0 0>; 298 }; 299 codec { 300 sound-dai = <&wm1811>; 301 }; 302 }; 303 304 thermistor-ap { 305 compatible = "murata,ncp15wb473"; 306 pullup-uv = <1800000>; /* VCC_1.8V_AP */ 307 pullup-ohm = <100000>; /* 100K */ 308 pulldown-ohm = <100000>; /* 100K */ 309 io-channels = <&adc 1>; /* AP temperature */ 310 }; 311 312 thermistor-battery { 313 compatible = "murata,ncp15wb473"; 314 pullup-uv = <1800000>; /* VCC_1.8V_AP */ 315 pullup-ohm = <100000>; /* 100K */ 316 pulldown-ohm = <100000>; /* 100K */ 317 io-channels = <&adc 2>; /* Battery temperature */ 318 }; 319}; 320 321&adc { 322 vdd-supply = <&ldo3_reg>; 323 status = "okay"; 324}; 325 326&bus_dmc { 327 devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; 328 vdd-supply = <&buck1_reg>; 329 status = "okay"; 330}; 331 332&bus_acp { 333 devfreq = <&bus_dmc>; 334 status = "okay"; 335}; 336 337&bus_c2c { 338 devfreq = <&bus_dmc>; 339 status = "okay"; 340}; 341 342&bus_leftbus { 343 devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; 344 vdd-supply = <&buck3_reg>; 345 status = "okay"; 346}; 347 348&bus_rightbus { 349 devfreq = <&bus_leftbus>; 350 status = "okay"; 351}; 352 353&bus_display { 354 devfreq = <&bus_leftbus>; 355 status = "okay"; 356}; 357 358&bus_fsys { 359 devfreq = <&bus_leftbus>; 360 status = "okay"; 361}; 362 363&bus_peri { 364 devfreq = <&bus_leftbus>; 365 status = "okay"; 366}; 367 368&bus_mfc { 369 devfreq = <&bus_leftbus>; 370 status = "okay"; 371}; 372 373&camera { 374 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; 375 pinctrl-names = "default"; 376 status = "okay"; 377 assigned-clocks = <&clock CLK_MOUT_CAM0>, 378 <&clock CLK_MOUT_CAM1>; 379 assigned-clock-parents = <&clock CLK_XUSBXTI>, 380 <&clock CLK_XUSBXTI>; 381}; 382 383&cpu0 { 384 cpu0-supply = <&buck2_reg>; 385}; 386 387&cpu_thermal { 388 cooling-maps { 389 map0 { 390 /* Corresponds to 800MHz at freq_table */ 391 cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, 392 <&cpu2 7 7>, <&cpu3 7 7>; 393 }; 394 map1 { 395 /* Corresponds to 200MHz at freq_table */ 396 cooling-device = <&cpu0 13 13>, <&cpu1 13 13>, 397 <&cpu2 13 13>, <&cpu3 13 13>; 398 }; 399 }; 400}; 401 402&csis_0 { 403 status = "okay"; 404 vddcore-supply = <&ldo8_reg>; 405 vddio-supply = <&ldo10_reg>; 406 assigned-clocks = <&clock CLK_MOUT_CSIS0>, 407 <&clock CLK_SCLK_CSIS0>; 408 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; 409 assigned-clock-rates = <0>, <176000000>; 410 411 /* Camera C (3) MIPI CSI-2 (CSIS0) */ 412 port@3 { 413 reg = <3>; 414 csis0_ep: endpoint { 415 remote-endpoint = <&s5c73m3_ep>; 416 data-lanes = <1 2 3 4>; 417 samsung,csis-hs-settle = <12>; 418 }; 419 }; 420}; 421 422&csis_1 { 423 status = "okay"; 424 vddcore-supply = <&ldo8_reg>; 425 vddio-supply = <&ldo10_reg>; 426 assigned-clocks = <&clock CLK_MOUT_CSIS1>, 427 <&clock CLK_SCLK_CSIS1>; 428 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; 429 assigned-clock-rates = <0>, <176000000>; 430 431 /* Camera D (4) MIPI CSI-2 (CSIS1) */ 432 port@4 { 433 reg = <4>; 434 csis1_ep: endpoint { 435 remote-endpoint = <&is_s5k6a3_ep>; 436 data-lanes = <1>; 437 samsung,csis-hs-settle = <18>; 438 samsung,csis-wclk; 439 }; 440 }; 441}; 442 443&dsi_0 { 444 vddcore-supply = <&ldo8_reg>; 445 vddio-supply = <&ldo10_reg>; 446 samsung,burst-clock-frequency = <500000000>; 447 samsung,esc-clock-frequency = <20000000>; 448 samsung,pll-clock-frequency = <24000000>; 449}; 450 451&exynos_usbphy { 452 vbus-supply = <&esafeout1_reg>; 453 status = "okay"; 454}; 455 456&fimc_0 { 457 status = "okay"; 458 assigned-clocks = <&clock CLK_MOUT_FIMC0>, 459 <&clock CLK_SCLK_FIMC0>; 460 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; 461 assigned-clock-rates = <0>, <176000000>; 462}; 463 464&fimc_1 { 465 status = "okay"; 466 assigned-clocks = <&clock CLK_MOUT_FIMC1>, 467 <&clock CLK_SCLK_FIMC1>; 468 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; 469 assigned-clock-rates = <0>, <176000000>; 470}; 471 472&fimc_2 { 473 status = "okay"; 474 assigned-clocks = <&clock CLK_MOUT_FIMC2>, 475 <&clock CLK_SCLK_FIMC2>; 476 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; 477 assigned-clock-rates = <0>, <176000000>; 478}; 479 480&fimc_3 { 481 status = "okay"; 482 assigned-clocks = <&clock CLK_MOUT_FIMC3>, 483 <&clock CLK_SCLK_FIMC3>; 484 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; 485 assigned-clock-rates = <0>, <176000000>; 486}; 487 488&fimc_is { 489 pinctrl-0 = <&fimc_is_uart>; 490 pinctrl-names = "default"; 491 status = "okay"; 492 493 }; 494 495&fimc_lite_0 { 496 status = "okay"; 497}; 498 499&fimc_lite_1 { 500 status = "okay"; 501}; 502 503&fimd { 504 status = "okay"; 505}; 506 507&gpu { 508 mali-supply = <&buck4_reg>; 509 status = "okay"; 510}; 511 512&hdmi { 513 hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; 514 pinctrl-names = "default"; 515 pinctrl-0 = <&hdmi_hpd>; 516 vdd-supply = <&ldo3_reg>; 517 vdd_osc-supply = <&ldo4_reg>; 518 vdd_pll-supply = <&ldo3_reg>; 519 ddc = <&i2c_5>; 520 status = "okay"; 521 522 ports { 523 #address-cells = <1>; 524 #size-cells = <0>; 525 526 port@1 { 527 reg = <1>; 528 hdmi_to_mhl: endpoint { 529 remote-endpoint = <&mhl_to_hdmi>; 530 }; 531 }; 532 }; 533}; 534 535&hsotg { 536 vusb_d-supply = <&ldo15_reg>; 537 vusb_a-supply = <&ldo12_reg>; 538 dr_mode = "peripheral"; 539 status = "okay"; 540}; 541 542&i2c_0 { 543 samsung,i2c-sda-delay = <100>; 544 samsung,i2c-slave-addr = <0x10>; 545 samsung,i2c-max-bus-freq = <400000>; 546 pinctrl-0 = <&i2c0_bus>; 547 pinctrl-names = "default"; 548 status = "okay"; 549 550 s5c73m3: image-sensor@3c { 551 compatible = "samsung,s5c73m3"; 552 reg = <0x3c>; 553 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */ 554 vdd-int-supply = <&buck9_reg>; 555 vddio-cis-supply = <&ldo9_reg>; 556 vddio-host-supply = <&ldo18_reg>; 557 vdd-af-supply = <&cam_af_reg>; 558 vdd-reg-supply = <&cam_io_reg>; 559 clock-frequency = <24000000>; 560 /* CAM_A_CLKOUT */ 561 clocks = <&camera 0>; 562 clock-names = "cis_extclk"; 563 status = "disabled"; 564 port { 565 s5c73m3_ep: endpoint { 566 remote-endpoint = <&csis0_ep>; 567 data-lanes = <1 2 3 4>; 568 }; 569 }; 570 }; 571}; 572 573&i2c1_isp { 574 pinctrl-0 = <&fimc_is_i2c1>; 575 pinctrl-names = "default"; 576 577 image-sensor@10 { 578 compatible = "samsung,s5k6a3"; 579 reg = <0x10>; 580 svdda-supply = <&cam_io_reg>; 581 svddio-supply = <&ldo19_reg>; 582 afvdd-supply = <&ldo19_reg>; 583 clock-frequency = <24000000>; 584 /* CAM_B_CLKOUT */ 585 clocks = <&camera 1>; 586 clock-names = "extclk"; 587 samsung,camclk-out = <1>; 588 gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>; 589 590 port { 591 is_s5k6a3_ep: endpoint { 592 remote-endpoint = <&csis1_ep>; 593 data-lanes = <1>; 594 }; 595 }; 596 }; 597}; 598 599&i2c_3 { 600 samsung,i2c-sda-delay = <100>; 601 samsung,i2c-slave-addr = <0x10>; 602 samsung,i2c-max-bus-freq = <400000>; 603 pinctrl-0 = <&i2c3_bus>; 604 pinctrl-names = "default"; 605 status = "okay"; 606}; 607 608&i2c_4 { 609 samsung,i2c-sda-delay = <100>; 610 samsung,i2c-slave-addr = <0x10>; 611 samsung,i2c-max-bus-freq = <100000>; 612 pinctrl-0 = <&i2c4_bus>; 613 pinctrl-names = "default"; 614 status = "okay"; 615 616 wm1811: audio-codec@1a { 617 compatible = "wlf,wm1811"; 618 reg = <0x1a>; 619 clocks = <&pmu_system_controller 0>, 620 <&max77686 MAX77686_CLK_PMIC>; 621 clock-names = "MCLK1", "MCLK2"; 622 interrupt-controller; 623 #interrupt-cells = <2>; 624 interrupt-parent = <&gpx3>; 625 interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; 626 627 gpio-controller; 628 #gpio-cells = <2>; 629 #sound-dai-cells = <0>; 630 631 wlf,gpio-cfg = <0x3 0x0 0x0 0x0 0x0 0x0 632 0x0 0x8000 0x0 0x0 0x0>; 633 wlf,micbias-cfg = <0x2f 0x2b>; 634 635 wlf,lineout1-feedback; 636 wlf,lineout1-se; 637 wlf,lineout2-se; 638 wlf,ldoena-always-driven; 639 640 AVDD2-supply = <&vbatt_reg>; 641 DBVDD1-supply = <&ldo3_reg>; 642 DBVDD2-supply = <&vbatt_reg>; 643 DBVDD3-supply = <&vbatt_reg>; 644 DCVDD-supply = <&ldo3_reg>; 645 CPVDD-supply = <&vbatt_reg>; 646 SPKVDD1-supply = <&vbatt_reg>; 647 SPKVDD2-supply = <&vbatt_reg>; 648 wlf,ldo1ena = <&gpj0 4 0>; 649 wlf,ldo2ena = <&gpj0 4 0>; 650 }; 651}; 652 653&i2c_5 { 654 status = "okay"; 655}; 656 657&i2c_7 { 658 samsung,i2c-sda-delay = <100>; 659 samsung,i2c-slave-addr = <0x10>; 660 samsung,i2c-max-bus-freq = <100000>; 661 pinctrl-0 = <&i2c7_bus>; 662 pinctrl-names = "default"; 663 status = "okay"; 664 665 max77686: pmic@9 { 666 compatible = "maxim,max77686"; 667 interrupt-parent = <&gpx0>; 668 interrupts = <7 IRQ_TYPE_LEVEL_LOW>; 669 pinctrl-0 = <&max77686_irq>; 670 pinctrl-names = "default"; 671 wakeup-source; 672 reg = <0x09>; 673 #clock-cells = <1>; 674 675 voltage-regulators { 676 ldo1_reg: LDO1 { 677 regulator-name = "VALIVE_1.0V_AP"; 678 regulator-min-microvolt = <1000000>; 679 regulator-max-microvolt = <1000000>; 680 regulator-always-on; 681 }; 682 683 ldo2_reg: LDO2 { 684 regulator-name = "VM1M2_1.2V_AP"; 685 regulator-min-microvolt = <1200000>; 686 regulator-max-microvolt = <1200000>; 687 regulator-always-on; 688 regulator-state-mem { 689 regulator-on-in-suspend; 690 }; 691 }; 692 693 ldo3_reg: LDO3 { 694 regulator-name = "VCC_1.8V_AP"; 695 regulator-min-microvolt = <1800000>; 696 regulator-max-microvolt = <1800000>; 697 regulator-always-on; 698 }; 699 700 ldo4_reg: LDO4 { 701 regulator-name = "VCC_2.8V_AP"; 702 regulator-min-microvolt = <2800000>; 703 regulator-max-microvolt = <2800000>; 704 regulator-always-on; 705 }; 706 707 ldo5_reg: LDO5 { 708 regulator-name = "VCC_1.8V_IO"; 709 regulator-min-microvolt = <1800000>; 710 regulator-max-microvolt = <1800000>; 711 regulator-always-on; 712 }; 713 714 ldo6_reg: LDO6 { 715 regulator-name = "VMPLL_1.0V_AP"; 716 regulator-min-microvolt = <1000000>; 717 regulator-max-microvolt = <1000000>; 718 regulator-always-on; 719 regulator-state-mem { 720 regulator-on-in-suspend; 721 }; 722 }; 723 724 ldo7_reg: LDO7 { 725 regulator-name = "VPLL_1.0V_AP"; 726 regulator-min-microvolt = <1000000>; 727 regulator-max-microvolt = <1000000>; 728 regulator-always-on; 729 regulator-state-mem { 730 regulator-on-in-suspend; 731 }; 732 }; 733 734 ldo8_reg: LDO8 { 735 regulator-name = "VMIPI_1.0V"; 736 regulator-min-microvolt = <1000000>; 737 regulator-max-microvolt = <1000000>; 738 regulator-state-mem { 739 regulator-off-in-suspend; 740 }; 741 }; 742 743 ldo9_reg: LDO9 { 744 regulator-name = "CAM_ISP_MIPI_1.2V"; 745 regulator-min-microvolt = <1200000>; 746 regulator-max-microvolt = <1200000>; 747 }; 748 749 ldo10_reg: LDO10 { 750 regulator-name = "VMIPI_1.8V"; 751 regulator-min-microvolt = <1800000>; 752 regulator-max-microvolt = <1800000>; 753 regulator-state-mem { 754 regulator-off-in-suspend; 755 }; 756 }; 757 758 ldo11_reg: LDO11 { 759 regulator-name = "VABB1_1.95V"; 760 regulator-min-microvolt = <1950000>; 761 regulator-max-microvolt = <1950000>; 762 regulator-always-on; 763 regulator-state-mem { 764 regulator-off-in-suspend; 765 }; 766 }; 767 768 ldo12_reg: LDO12 { 769 regulator-name = "VUOTG_3.0V"; 770 regulator-min-microvolt = <3000000>; 771 regulator-max-microvolt = <3000000>; 772 regulator-state-mem { 773 regulator-off-in-suspend; 774 }; 775 }; 776 777 ldo13_reg: LDO13 { 778 regulator-name = "NFC_AVDD_1.8V"; 779 regulator-min-microvolt = <1800000>; 780 regulator-max-microvolt = <1800000>; 781 }; 782 783 ldo14_reg: LDO14 { 784 regulator-name = "VABB2_1.95V"; 785 regulator-min-microvolt = <1950000>; 786 regulator-max-microvolt = <1950000>; 787 regulator-always-on; 788 regulator-state-mem { 789 regulator-off-in-suspend; 790 }; 791 }; 792 793 ldo15_reg: LDO15 { 794 regulator-name = "VHSIC_1.0V"; 795 regulator-min-microvolt = <1000000>; 796 regulator-max-microvolt = <1000000>; 797 regulator-state-mem { 798 regulator-on-in-suspend; 799 }; 800 }; 801 802 ldo16_reg: LDO16 { 803 regulator-name = "VHSIC_1.8V"; 804 regulator-min-microvolt = <1800000>; 805 regulator-max-microvolt = <1800000>; 806 regulator-state-mem { 807 regulator-on-in-suspend; 808 }; 809 }; 810 811 ldo17_reg: LDO17 { 812 regulator-name = "CAM_SENSOR_CORE_1.2V"; 813 regulator-min-microvolt = <1200000>; 814 regulator-max-microvolt = <1200000>; 815 }; 816 817 ldo18_reg: LDO18 { 818 regulator-name = "CAM_ISP_SEN_IO_1.8V"; 819 regulator-min-microvolt = <1800000>; 820 regulator-max-microvolt = <1800000>; 821 }; 822 823 ldo19_reg: LDO19 { 824 regulator-name = "VT_CAM_1.8V"; 825 regulator-min-microvolt = <1800000>; 826 regulator-max-microvolt = <1800000>; 827 }; 828 829 ldo20_reg: LDO20 { 830 regulator-name = "VDDQ_PRE_1.8V"; 831 regulator-min-microvolt = <1800000>; 832 regulator-max-microvolt = <1800000>; 833 }; 834 835 ldo21_reg: LDO21 { 836 regulator-name = "VTF_2.8V"; 837 regulator-min-microvolt = <2800000>; 838 regulator-max-microvolt = <2800000>; 839 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>; 840 }; 841 842 ldo22_reg: LDO22 { 843 regulator-name = "VMEM_VDD_2.8V"; 844 regulator-min-microvolt = <2800000>; 845 regulator-max-microvolt = <2800000>; 846 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; 847 }; 848 849 ldo23_reg: LDO23 { 850 regulator-name = "TSP_AVDD_3.3V"; 851 regulator-min-microvolt = <3300000>; 852 regulator-max-microvolt = <3300000>; 853 }; 854 855 ldo24_reg: LDO24 { 856 regulator-name = "TSP_VDD_1.8V"; 857 regulator-min-microvolt = <1800000>; 858 regulator-max-microvolt = <1800000>; 859 }; 860 861 ldo25_reg: LDO25 { 862 regulator-name = "LDO25"; 863 }; 864 865 ldo26_reg: LDO26 { 866 regulator-name = "MOTOR_VCC_3.0V"; 867 regulator-min-microvolt = <3000000>; 868 regulator-max-microvolt = <3000000>; 869 }; 870 871 buck1_reg: BUCK1 { 872 regulator-name = "VDD_MIF"; 873 regulator-min-microvolt = <850000>; 874 regulator-max-microvolt = <1100000>; 875 regulator-always-on; 876 regulator-boot-on; 877 regulator-state-mem { 878 regulator-off-in-suspend; 879 }; 880 }; 881 882 buck2_reg: BUCK2 { 883 regulator-name = "VDD_ARM"; 884 regulator-min-microvolt = <850000>; 885 regulator-max-microvolt = <1500000>; 886 regulator-always-on; 887 regulator-boot-on; 888 regulator-state-mem { 889 regulator-on-in-suspend; 890 }; 891 }; 892 893 buck3_reg: BUCK3 { 894 regulator-name = "VDD_INT"; 895 regulator-min-microvolt = <850000>; 896 regulator-max-microvolt = <1150000>; 897 regulator-always-on; 898 regulator-boot-on; 899 regulator-state-mem { 900 regulator-off-in-suspend; 901 }; 902 }; 903 904 buck4_reg: BUCK4 { 905 regulator-name = "VDD_G3D"; 906 regulator-min-microvolt = <850000>; 907 regulator-max-microvolt = <1150000>; 908 regulator-boot-on; 909 regulator-state-mem { 910 regulator-off-in-suspend; 911 }; 912 }; 913 914 buck5_reg: BUCK5 { 915 regulator-name = "VMEM_1.2V_AP"; 916 regulator-min-microvolt = <1200000>; 917 regulator-max-microvolt = <1200000>; 918 regulator-always-on; 919 }; 920 921 buck6_reg: BUCK6 { 922 regulator-name = "VCC_SUB_1.35V"; 923 regulator-min-microvolt = <1350000>; 924 regulator-max-microvolt = <1350000>; 925 regulator-always-on; 926 }; 927 928 buck7_reg: BUCK7 { 929 regulator-name = "VCC_SUB_2.0V"; 930 regulator-min-microvolt = <2000000>; 931 regulator-max-microvolt = <2000000>; 932 regulator-always-on; 933 }; 934 935 buck8_reg: BUCK8 { 936 regulator-name = "VMEM_VDDF_3.0V"; 937 regulator-min-microvolt = <2850000>; 938 regulator-max-microvolt = <2850000>; 939 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; 940 }; 941 942 buck9_reg: BUCK9 { 943 regulator-name = "CAM_ISP_CORE_1.2V"; 944 regulator-min-microvolt = <1000000>; 945 regulator-max-microvolt = <1200000>; 946 }; 947 }; 948 }; 949}; 950 951&i2c_8 { 952 status = "okay"; 953}; 954 955&i2s0 { 956 pinctrl-0 = <&i2s0_bus>; 957 pinctrl-names = "default"; 958 status = "okay"; 959}; 960 961&mixer { 962 status = "okay"; 963}; 964 965&mshc_0 { 966 broken-cd; 967 non-removable; 968 card-detect-delay = <200>; 969 vmmc-supply = <&ldo22_reg>; 970 clock-frequency = <400000000>; 971 samsung,dw-mshc-ciu-div = <0>; 972 samsung,dw-mshc-sdr-timing = <2 3>; 973 samsung,dw-mshc-ddr-timing = <1 2>; 974 pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; 975 pinctrl-names = "default"; 976 status = "okay"; 977 bus-width = <8>; 978 cap-mmc-highspeed; 979}; 980 981&pmu_system_controller { 982 assigned-clocks = <&pmu_system_controller 0>; 983 assigned-clock-parents = <&clock CLK_XUSBXTI>; 984}; 985 986&pinctrl_0 { 987 pinctrl-names = "default"; 988 pinctrl-0 = <&sleep0>; 989 990 mhl_int: mhl-int { 991 samsung,pins = "gpf3-5"; 992 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; 993 }; 994 995 i2c_mhl_bus: i2c-mhl-bus { 996 samsung,pins = "gpf0-4", "gpf0-6"; 997 samsung,pin-function = <EXYNOS_PIN_FUNC_2>; 998 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; 999 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; 1000 }; 1001 1002 sleep0: sleep-states { 1003 PIN_SLP(gpa0-0, INPUT, NONE); 1004 PIN_SLP(gpa0-1, OUT0, NONE); 1005 PIN_SLP(gpa0-2, INPUT, NONE); 1006 PIN_SLP(gpa0-3, INPUT, UP); 1007 PIN_SLP(gpa0-4, INPUT, NONE); 1008 PIN_SLP(gpa0-5, INPUT, DOWN); 1009 PIN_SLP(gpa0-6, INPUT, DOWN); 1010 PIN_SLP(gpa0-7, INPUT, UP); 1011 1012 PIN_SLP(gpa1-0, INPUT, DOWN); 1013 PIN_SLP(gpa1-1, INPUT, DOWN); 1014 PIN_SLP(gpa1-2, INPUT, DOWN); 1015 PIN_SLP(gpa1-3, INPUT, DOWN); 1016 PIN_SLP(gpa1-4, INPUT, DOWN); 1017 PIN_SLP(gpa1-5, INPUT, DOWN); 1018 1019 PIN_SLP(gpb-0, INPUT, NONE); 1020 PIN_SLP(gpb-1, INPUT, NONE); 1021 PIN_SLP(gpb-2, INPUT, NONE); 1022 PIN_SLP(gpb-3, INPUT, NONE); 1023 PIN_SLP(gpb-4, INPUT, DOWN); 1024 PIN_SLP(gpb-5, INPUT, UP); 1025 PIN_SLP(gpb-6, INPUT, DOWN); 1026 PIN_SLP(gpb-7, INPUT, DOWN); 1027 1028 PIN_SLP(gpc0-0, INPUT, DOWN); 1029 PIN_SLP(gpc0-1, INPUT, DOWN); 1030 PIN_SLP(gpc0-2, INPUT, DOWN); 1031 PIN_SLP(gpc0-3, INPUT, DOWN); 1032 PIN_SLP(gpc0-4, INPUT, DOWN); 1033 1034 PIN_SLP(gpc1-0, INPUT, NONE); 1035 PIN_SLP(gpc1-1, PREV, NONE); 1036 PIN_SLP(gpc1-2, INPUT, NONE); 1037 PIN_SLP(gpc1-3, INPUT, NONE); 1038 PIN_SLP(gpc1-4, INPUT, NONE); 1039 1040 PIN_SLP(gpd0-0, INPUT, DOWN); 1041 PIN_SLP(gpd0-1, INPUT, DOWN); 1042 PIN_SLP(gpd0-2, INPUT, NONE); 1043 PIN_SLP(gpd0-3, INPUT, NONE); 1044 1045 PIN_SLP(gpd1-0, INPUT, DOWN); 1046 PIN_SLP(gpd1-1, INPUT, DOWN); 1047 PIN_SLP(gpd1-2, INPUT, NONE); 1048 PIN_SLP(gpd1-3, INPUT, NONE); 1049 1050 PIN_SLP(gpf0-0, INPUT, NONE); 1051 PIN_SLP(gpf0-1, INPUT, NONE); 1052 PIN_SLP(gpf0-2, INPUT, DOWN); 1053 PIN_SLP(gpf0-3, INPUT, DOWN); 1054 PIN_SLP(gpf0-4, INPUT, NONE); 1055 PIN_SLP(gpf0-5, INPUT, DOWN); 1056 PIN_SLP(gpf0-6, INPUT, NONE); 1057 PIN_SLP(gpf0-7, INPUT, DOWN); 1058 1059 PIN_SLP(gpf1-0, INPUT, DOWN); 1060 PIN_SLP(gpf1-1, INPUT, DOWN); 1061 PIN_SLP(gpf1-2, INPUT, DOWN); 1062 PIN_SLP(gpf1-3, INPUT, DOWN); 1063 PIN_SLP(gpf1-4, INPUT, NONE); 1064 PIN_SLP(gpf1-5, INPUT, NONE); 1065 PIN_SLP(gpf1-6, INPUT, DOWN); 1066 PIN_SLP(gpf1-7, PREV, NONE); 1067 1068 PIN_SLP(gpf2-0, PREV, NONE); 1069 PIN_SLP(gpf2-1, INPUT, DOWN); 1070 PIN_SLP(gpf2-2, INPUT, DOWN); 1071 PIN_SLP(gpf2-3, INPUT, DOWN); 1072 PIN_SLP(gpf2-4, INPUT, DOWN); 1073 PIN_SLP(gpf2-5, INPUT, DOWN); 1074 PIN_SLP(gpf2-6, INPUT, NONE); 1075 PIN_SLP(gpf2-7, INPUT, NONE); 1076 1077 PIN_SLP(gpf3-0, INPUT, NONE); 1078 PIN_SLP(gpf3-1, PREV, NONE); 1079 PIN_SLP(gpf3-2, PREV, NONE); 1080 PIN_SLP(gpf3-3, PREV, NONE); 1081 PIN_SLP(gpf3-4, OUT1, NONE); 1082 PIN_SLP(gpf3-5, INPUT, DOWN); 1083 1084 PIN_SLP(gpj0-0, PREV, NONE); 1085 PIN_SLP(gpj0-1, PREV, NONE); 1086 PIN_SLP(gpj0-2, PREV, NONE); 1087 PIN_SLP(gpj0-3, INPUT, DOWN); 1088 PIN_SLP(gpj0-4, PREV, NONE); 1089 PIN_SLP(gpj0-5, PREV, NONE); 1090 PIN_SLP(gpj0-6, INPUT, DOWN); 1091 PIN_SLP(gpj0-7, INPUT, DOWN); 1092 1093 PIN_SLP(gpj1-0, INPUT, DOWN); 1094 PIN_SLP(gpj1-1, PREV, NONE); 1095 PIN_SLP(gpj1-2, PREV, NONE); 1096 PIN_SLP(gpj1-3, INPUT, DOWN); 1097 PIN_SLP(gpj1-4, INPUT, DOWN); 1098 }; 1099}; 1100 1101&pinctrl_1 { 1102 pinctrl-names = "default"; 1103 pinctrl-0 = <&sleep1>; 1104 1105 gpio_keys: gpio-keys { 1106 samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3"; 1107 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; 1108 }; 1109 1110 bt_shutdown: bt-shutdown { 1111 samsung,pins = "gpl0-6"; 1112 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; 1113 }; 1114 1115 bt_host_wakeup: bt-host-wakeup { 1116 samsung,pins = "gpx2-6"; 1117 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; 1118 }; 1119 1120 bt_device_wakeup: bt-device-wakeup { 1121 samsung,pins = "gpx3-1"; 1122 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; 1123 }; 1124 1125 max77686_irq: max77686-irq { 1126 samsung,pins = "gpx0-7"; 1127 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; 1128 }; 1129 1130 max77693_irq: max77693-irq { 1131 samsung,pins = "gpx1-5"; 1132 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; 1133 }; 1134 1135 max77693_fuel_irq: max77693-fuel-irq { 1136 samsung,pins = "gpx2-3"; 1137 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; 1138 }; 1139 1140 sdhci2_cd: sdhci2-cd-irq { 1141 samsung,pins = "gpx3-4"; 1142 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; 1143 }; 1144 1145 hdmi_hpd: hdmi-hpd { 1146 samsung,pins = "gpx3-7"; 1147 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; 1148 }; 1149 1150 sleep1: sleep-states { 1151 PIN_SLP(gpk0-0, PREV, NONE); 1152 PIN_SLP(gpk0-1, PREV, NONE); 1153 PIN_SLP(gpk0-2, OUT0, NONE); 1154 PIN_SLP(gpk0-3, PREV, NONE); 1155 PIN_SLP(gpk0-4, PREV, NONE); 1156 PIN_SLP(gpk0-5, PREV, NONE); 1157 PIN_SLP(gpk0-6, PREV, NONE); 1158 1159 PIN_SLP(gpk1-0, INPUT, DOWN); 1160 PIN_SLP(gpk1-1, INPUT, DOWN); 1161 PIN_SLP(gpk1-2, INPUT, DOWN); 1162 PIN_SLP(gpk1-3, PREV, NONE); 1163 PIN_SLP(gpk1-4, PREV, NONE); 1164 PIN_SLP(gpk1-5, PREV, NONE); 1165 PIN_SLP(gpk1-6, PREV, NONE); 1166 1167 PIN_SLP(gpk2-0, INPUT, DOWN); 1168 PIN_SLP(gpk2-1, INPUT, DOWN); 1169 PIN_SLP(gpk2-2, INPUT, DOWN); 1170 PIN_SLP(gpk2-3, INPUT, DOWN); 1171 PIN_SLP(gpk2-4, INPUT, DOWN); 1172 PIN_SLP(gpk2-5, INPUT, DOWN); 1173 PIN_SLP(gpk2-6, INPUT, DOWN); 1174 1175 PIN_SLP(gpk3-0, OUT0, NONE); 1176 PIN_SLP(gpk3-1, INPUT, NONE); 1177 PIN_SLP(gpk3-2, INPUT, DOWN); 1178 PIN_SLP(gpk3-3, INPUT, NONE); 1179 PIN_SLP(gpk3-4, INPUT, NONE); 1180 PIN_SLP(gpk3-5, INPUT, NONE); 1181 PIN_SLP(gpk3-6, INPUT, NONE); 1182 1183 PIN_SLP(gpl0-0, INPUT, DOWN); 1184 PIN_SLP(gpl0-1, INPUT, DOWN); 1185 PIN_SLP(gpl0-2, INPUT, DOWN); 1186 PIN_SLP(gpl0-3, INPUT, DOWN); 1187 PIN_SLP(gpl0-4, PREV, NONE); 1188 PIN_SLP(gpl0-6, PREV, NONE); 1189 1190 PIN_SLP(gpl1-0, INPUT, DOWN); 1191 PIN_SLP(gpl1-1, INPUT, DOWN); 1192 PIN_SLP(gpl2-0, INPUT, DOWN); 1193 PIN_SLP(gpl2-1, INPUT, DOWN); 1194 PIN_SLP(gpl2-2, INPUT, DOWN); 1195 PIN_SLP(gpl2-3, INPUT, DOWN); 1196 PIN_SLP(gpl2-4, INPUT, DOWN); 1197 PIN_SLP(gpl2-5, INPUT, DOWN); 1198 PIN_SLP(gpl2-6, PREV, NONE); 1199 PIN_SLP(gpl2-7, INPUT, DOWN); 1200 1201 PIN_SLP(gpm0-0, INPUT, DOWN); 1202 PIN_SLP(gpm0-1, INPUT, DOWN); 1203 PIN_SLP(gpm0-2, INPUT, DOWN); 1204 PIN_SLP(gpm0-3, INPUT, DOWN); 1205 PIN_SLP(gpm0-4, INPUT, DOWN); 1206 PIN_SLP(gpm0-5, INPUT, DOWN); 1207 PIN_SLP(gpm0-6, INPUT, DOWN); 1208 PIN_SLP(gpm0-7, INPUT, DOWN); 1209 1210 PIN_SLP(gpm1-0, INPUT, DOWN); 1211 PIN_SLP(gpm1-1, INPUT, DOWN); 1212 PIN_SLP(gpm1-2, INPUT, NONE); 1213 PIN_SLP(gpm1-3, INPUT, NONE); 1214 PIN_SLP(gpm1-4, INPUT, NONE); 1215 PIN_SLP(gpm1-5, INPUT, NONE); 1216 PIN_SLP(gpm1-6, INPUT, DOWN); 1217 1218 PIN_SLP(gpm2-0, INPUT, NONE); 1219 PIN_SLP(gpm2-1, INPUT, NONE); 1220 PIN_SLP(gpm2-2, INPUT, DOWN); 1221 PIN_SLP(gpm2-3, INPUT, DOWN); 1222 PIN_SLP(gpm2-4, INPUT, DOWN); 1223 1224 PIN_SLP(gpm3-0, PREV, NONE); 1225 PIN_SLP(gpm3-1, PREV, NONE); 1226 PIN_SLP(gpm3-2, PREV, NONE); 1227 PIN_SLP(gpm3-3, OUT1, NONE); 1228 PIN_SLP(gpm3-4, INPUT, DOWN); 1229 PIN_SLP(gpm3-5, INPUT, DOWN); 1230 PIN_SLP(gpm3-6, INPUT, DOWN); 1231 PIN_SLP(gpm3-7, INPUT, DOWN); 1232 1233 PIN_SLP(gpm4-0, INPUT, DOWN); 1234 PIN_SLP(gpm4-1, INPUT, DOWN); 1235 PIN_SLP(gpm4-2, INPUT, DOWN); 1236 PIN_SLP(gpm4-3, INPUT, DOWN); 1237 PIN_SLP(gpm4-4, INPUT, DOWN); 1238 PIN_SLP(gpm4-5, INPUT, DOWN); 1239 PIN_SLP(gpm4-6, INPUT, DOWN); 1240 PIN_SLP(gpm4-7, INPUT, DOWN); 1241 1242 PIN_SLP(gpy0-0, INPUT, DOWN); 1243 PIN_SLP(gpy0-1, INPUT, DOWN); 1244 PIN_SLP(gpy0-2, INPUT, DOWN); 1245 PIN_SLP(gpy0-3, INPUT, DOWN); 1246 PIN_SLP(gpy0-4, INPUT, DOWN); 1247 PIN_SLP(gpy0-5, INPUT, DOWN); 1248 1249 PIN_SLP(gpy1-0, INPUT, DOWN); 1250 PIN_SLP(gpy1-1, INPUT, DOWN); 1251 PIN_SLP(gpy1-2, INPUT, DOWN); 1252 PIN_SLP(gpy1-3, INPUT, DOWN); 1253 1254 PIN_SLP(gpy2-0, PREV, NONE); 1255 PIN_SLP(gpy2-1, INPUT, DOWN); 1256 PIN_SLP(gpy2-2, INPUT, NONE); 1257 PIN_SLP(gpy2-3, INPUT, NONE); 1258 PIN_SLP(gpy2-4, INPUT, NONE); 1259 PIN_SLP(gpy2-5, INPUT, NONE); 1260 1261 PIN_SLP(gpy3-0, INPUT, DOWN); 1262 PIN_SLP(gpy3-1, INPUT, DOWN); 1263 PIN_SLP(gpy3-2, INPUT, DOWN); 1264 PIN_SLP(gpy3-3, INPUT, DOWN); 1265 PIN_SLP(gpy3-4, INPUT, DOWN); 1266 PIN_SLP(gpy3-5, INPUT, DOWN); 1267 PIN_SLP(gpy3-6, INPUT, DOWN); 1268 PIN_SLP(gpy3-7, INPUT, DOWN); 1269 1270 PIN_SLP(gpy4-0, INPUT, DOWN); 1271 PIN_SLP(gpy4-1, INPUT, DOWN); 1272 PIN_SLP(gpy4-2, INPUT, DOWN); 1273 PIN_SLP(gpy4-3, INPUT, DOWN); 1274 PIN_SLP(gpy4-4, INPUT, DOWN); 1275 PIN_SLP(gpy4-5, INPUT, DOWN); 1276 PIN_SLP(gpy4-6, INPUT, DOWN); 1277 PIN_SLP(gpy4-7, INPUT, DOWN); 1278 1279 PIN_SLP(gpy5-0, INPUT, DOWN); 1280 PIN_SLP(gpy5-1, INPUT, DOWN); 1281 PIN_SLP(gpy5-2, INPUT, DOWN); 1282 PIN_SLP(gpy5-3, INPUT, DOWN); 1283 PIN_SLP(gpy5-4, INPUT, DOWN); 1284 PIN_SLP(gpy5-5, INPUT, DOWN); 1285 PIN_SLP(gpy5-6, INPUT, DOWN); 1286 PIN_SLP(gpy5-7, INPUT, DOWN); 1287 1288 PIN_SLP(gpy6-0, INPUT, DOWN); 1289 PIN_SLP(gpy6-1, INPUT, DOWN); 1290 PIN_SLP(gpy6-2, INPUT, DOWN); 1291 PIN_SLP(gpy6-3, INPUT, DOWN); 1292 PIN_SLP(gpy6-4, INPUT, DOWN); 1293 PIN_SLP(gpy6-5, INPUT, DOWN); 1294 PIN_SLP(gpy6-6, INPUT, DOWN); 1295 PIN_SLP(gpy6-7, INPUT, DOWN); 1296 }; 1297}; 1298 1299&pinctrl_2 { 1300 pinctrl-names = "default"; 1301 pinctrl-0 = <&sleep2>; 1302 1303 sleep2: sleep-states { 1304 PIN_SLP(gpz-0, INPUT, DOWN); 1305 PIN_SLP(gpz-1, INPUT, DOWN); 1306 PIN_SLP(gpz-2, INPUT, DOWN); 1307 PIN_SLP(gpz-3, INPUT, DOWN); 1308 PIN_SLP(gpz-4, INPUT, DOWN); 1309 PIN_SLP(gpz-5, INPUT, DOWN); 1310 PIN_SLP(gpz-6, INPUT, DOWN); 1311 }; 1312}; 1313 1314&pinctrl_3 { 1315 pinctrl-names = "default"; 1316 pinctrl-0 = <&sleep3>; 1317 1318 sleep3: sleep-states { 1319 PIN_SLP(gpv0-0, INPUT, DOWN); 1320 PIN_SLP(gpv0-1, INPUT, DOWN); 1321 PIN_SLP(gpv0-2, INPUT, DOWN); 1322 PIN_SLP(gpv0-3, INPUT, DOWN); 1323 PIN_SLP(gpv0-4, INPUT, DOWN); 1324 PIN_SLP(gpv0-5, INPUT, DOWN); 1325 PIN_SLP(gpv0-6, INPUT, DOWN); 1326 PIN_SLP(gpv0-7, INPUT, DOWN); 1327 1328 PIN_SLP(gpv1-0, INPUT, DOWN); 1329 PIN_SLP(gpv1-1, INPUT, DOWN); 1330 PIN_SLP(gpv1-2, INPUT, DOWN); 1331 PIN_SLP(gpv1-3, INPUT, DOWN); 1332 PIN_SLP(gpv1-4, INPUT, DOWN); 1333 PIN_SLP(gpv1-5, INPUT, DOWN); 1334 PIN_SLP(gpv1-6, INPUT, DOWN); 1335 PIN_SLP(gpv1-7, INPUT, DOWN); 1336 1337 PIN_SLP(gpv2-0, INPUT, DOWN); 1338 PIN_SLP(gpv2-1, INPUT, DOWN); 1339 PIN_SLP(gpv2-2, INPUT, DOWN); 1340 PIN_SLP(gpv2-3, INPUT, DOWN); 1341 PIN_SLP(gpv2-4, INPUT, DOWN); 1342 PIN_SLP(gpv2-5, INPUT, DOWN); 1343 PIN_SLP(gpv2-6, INPUT, DOWN); 1344 PIN_SLP(gpv2-7, INPUT, DOWN); 1345 1346 PIN_SLP(gpv3-0, INPUT, DOWN); 1347 PIN_SLP(gpv3-1, INPUT, DOWN); 1348 PIN_SLP(gpv3-2, INPUT, DOWN); 1349 PIN_SLP(gpv3-3, INPUT, DOWN); 1350 PIN_SLP(gpv3-4, INPUT, DOWN); 1351 PIN_SLP(gpv3-5, INPUT, DOWN); 1352 PIN_SLP(gpv3-6, INPUT, DOWN); 1353 PIN_SLP(gpv3-7, INPUT, DOWN); 1354 1355 PIN_SLP(gpv4-0, INPUT, DOWN); 1356 }; 1357}; 1358 1359&pwm { 1360 pinctrl-0 = <&pwm0_out>; 1361 pinctrl-names = "default"; 1362 samsung,pwm-outputs = <0>; 1363 status = "okay"; 1364}; 1365 1366&rtc { 1367 status = "okay"; 1368 clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; 1369 clock-names = "rtc", "rtc_src"; 1370}; 1371 1372&sdhci_2 { 1373 bus-width = <4>; 1374 cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; 1375 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>; 1376 pinctrl-names = "default"; 1377 vmmc-supply = <&ldo21_reg>; 1378 status = "okay"; 1379}; 1380 1381&sdhci_3 { 1382 #address-cells = <1>; 1383 #size-cells = <0>; 1384 non-removable; 1385 bus-width = <4>; 1386 1387 mmc-pwrseq = <&wlan_pwrseq>; 1388 pinctrl-names = "default"; 1389 pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; 1390 status = "okay"; 1391 1392 brcmf: wifi@1 { 1393 reg = <1>; 1394 compatible = "brcm,bcm4329-fmac"; 1395 interrupt-parent = <&gpx2>; 1396 interrupts = <5 IRQ_TYPE_NONE>; 1397 interrupt-names = "host-wake"; 1398 }; 1399}; 1400 1401&serial_0 { 1402 pinctrl-0 = <&uart0_data &uart0_fctl>; 1403 pinctrl-names = "default"; 1404 status = "okay"; 1405 1406 bluetooth { 1407 compatible = "brcm,bcm4330-bt"; 1408 pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>; 1409 pinctrl-names = "default"; 1410 max-speed = <3000000>; 1411 shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>; 1412 device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; 1413 host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; 1414 clocks = <&max77686 MAX77686_CLK_PMIC>; 1415 }; 1416}; 1417 1418&serial_1 { 1419 status = "okay"; 1420}; 1421 1422&serial_2 { 1423 status = "okay"; 1424}; 1425 1426&serial_3 { 1427 status = "okay"; 1428}; 1429 1430&spi_1 { 1431 pinctrl-names = "default"; 1432 pinctrl-0 = <&spi1_bus>; 1433 cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; 1434 status = "okay"; 1435 1436 s5c73m3_spi: image-sensor@0 { 1437 compatible = "samsung,s5c73m3"; 1438 spi-max-frequency = <50000000>; 1439 reg = <0>; 1440 controller-data { 1441 samsung,spi-feedback-delay = <2>; 1442 }; 1443 }; 1444}; 1445 1446&tmu { 1447 vtmu-supply = <&ldo10_reg>; 1448 status = "okay"; 1449}; 1450