1/* 2 * Support for imx6 based Advantech DMS-BA16 Qseven module 3 * 4 * Copyright 2015 Timesys Corporation. 5 * Copyright 2015 General Electric Company 6 * 7 * This file is dual-licensed: you can use it either under the terms 8 * of the GPL or the X11 license, at your option. Note that this dual 9 * licensing only applies to this file, and not this project as a 10 * whole. 11 * 12 * a) This file is free software; you can redistribute it and/or 13 * modify it under the terms of the GNU General Public License 14 * version 2 as published by the Free Software Foundation. 15 * 16 * This file is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * Or, alternatively, 22 * 23 * b) Permission is hereby granted, free of charge, to any person 24 * obtaining a copy of this software and associated documentation 25 * files (the "Software"), to deal in the Software without 26 * restriction, including without limitation the rights to use, 27 * copy, modify, merge, publish, distribute, sublicense, and/or 28 * sell copies of the Software, and to permit persons to whom the 29 * Software is furnished to do so, subject to the following 30 * conditions: 31 * 32 * The above copyright notice and this permission notice shall be 33 * included in all copies or substantial portions of the Software. 34 * 35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 42 * OTHER DEALINGS IN THE SOFTWARE. 43 */ 44 45#include "imx6q.dtsi" 46#include <dt-bindings/gpio/gpio.h> 47 48/ { 49 memory@10000000 { 50 device_type = "memory"; 51 reg = <0x10000000 0x40000000>; 52 }; 53 54 backlight_lvds: backlight { 55 compatible = "pwm-backlight"; 56 pinctrl-names = "default"; 57 pinctrl-0 = <&pinctrl_display>; 58 pwms = <&pwm1 0 5000000>; 59 brightness-levels = < 0 1 2 3 4 5 6 7 8 9 60 10 11 12 13 14 15 16 17 18 19 61 20 21 22 23 24 25 26 27 28 29 62 30 31 32 33 34 35 36 37 38 39 63 40 41 42 43 44 45 46 47 48 49 64 50 51 52 53 54 55 56 57 58 59 65 60 61 62 63 64 65 66 67 68 69 66 70 71 72 73 74 75 76 77 78 79 67 80 81 82 83 84 85 86 87 88 89 68 90 91 92 93 94 95 96 97 98 99 69 100 101 102 103 104 105 106 107 108 109 70 110 111 112 113 114 115 116 117 118 119 71 120 121 122 123 124 125 126 127 128 129 72 130 131 132 133 134 135 136 137 138 139 73 140 141 142 143 144 145 146 147 148 149 74 150 151 152 153 154 155 156 157 158 159 75 160 161 162 163 164 165 166 167 168 169 76 170 171 172 173 174 175 176 177 178 179 77 180 181 182 183 184 185 186 187 188 189 78 190 191 192 193 194 195 196 197 198 199 79 200 201 202 203 204 205 206 207 208 209 80 210 211 212 213 214 215 216 217 218 219 81 220 221 222 223 224 225 226 227 228 229 82 230 231 232 233 234 235 236 237 238 239 83 240 241 242 243 244 245 246 247 248 249 84 250 251 252 253 254 255>; 85 default-brightness-level = <255>; 86 enable-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; 87 }; 88 89 reg_1p8v: regulator-1p8v { 90 compatible = "regulator-fixed"; 91 regulator-name = "1P8V"; 92 regulator-min-microvolt = <1800000>; 93 regulator-max-microvolt = <1800000>; 94 regulator-always-on; 95 }; 96 97 reg_3p3v: regulator-3p3v { 98 compatible = "regulator-fixed"; 99 regulator-name = "3P3V"; 100 regulator-min-microvolt = <3300000>; 101 regulator-max-microvolt = <3300000>; 102 regulator-always-on; 103 }; 104 105 reg_lvds: regulator-lvds { 106 compatible = "regulator-fixed"; 107 regulator-name = "lvds_ppen"; 108 regulator-min-microvolt = <3300000>; 109 regulator-max-microvolt = <3300000>; 110 regulator-boot-on; 111 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; 112 enable-active-high; 113 }; 114 115 reg_usb_h1_vbus: regulator-usbh1vbus { 116 compatible = "regulator-fixed"; 117 regulator-name = "usb_h1_vbus"; 118 regulator-min-microvolt = <5000000>; 119 regulator-max-microvolt = <5000000>; 120 }; 121 122 reg_usb_otg_vbus: regulator-usbotgvbus { 123 compatible = "regulator-fixed"; 124 regulator-name = "usb_otg_vbus"; 125 regulator-min-microvolt = <5000000>; 126 regulator-max-microvolt = <5000000>; 127 pinctrl-0 = <&pinctrl_usbotg_vbus>; 128 gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; 129 enable-active-high; 130 }; 131}; 132 133&audmux { 134 pinctrl-names = "default"; 135 pinctrl-0 = <&pinctrl_audmux>; 136 status = "okay"; 137}; 138 139&ecspi1 { 140 cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; 141 pinctrl-names = "default"; 142 pinctrl-0 = <&pinctrl_ecspi1>; 143 status = "okay"; 144 145 flash: n25q032@0 { 146 compatible = "jedec,spi-nor"; 147 #address-cells = <1>; 148 #size-cells = <1>; 149 spi-max-frequency = <20000000>; 150 reg = <0>; 151 152 partition@0 { 153 label = "U-Boot"; 154 reg = <0x0 0xc0000>; 155 }; 156 157 partition@c0000 { 158 label = "env"; 159 reg = <0xc0000 0x10000>; 160 }; 161 162 partition@d0000 { 163 label = "spare"; 164 reg = <0xd0000 0x320000>; 165 }; 166 167 partition@3f0000 { 168 label = "mfg"; 169 reg = <0x3f0000 0x10000>; 170 }; 171 }; 172}; 173 174&fec { 175 pinctrl-names = "default"; 176 pinctrl-0 = <&pinctrl_enet>; 177 phy-mode = "rgmii-id"; 178 phy-supply = <®_3p3v>; 179 phy-handle = <&phy0>; 180 status = "okay"; 181 182 mdio { 183 #address-cells = <1>; 184 #size-cells = <0>; 185 186 phy0: ethernet-phy@4 { 187 reg = <4>; 188 qca,clk-out-frequency = <125000000>; 189 }; 190 }; 191}; 192 193&hdmi { 194 ddc-i2c-bus = <&i2c2>; 195 status = "okay"; 196}; 197 198&i2c1 { 199 clock-frequency = <100000>; 200 pinctrl-names = "default"; 201 pinctrl-0 = <&pinctrl_i2c1>; 202 status = "okay"; 203}; 204 205&i2c2 { 206 clock-frequency = <100000>; 207 pinctrl-names = "default"; 208 pinctrl-0 = <&pinctrl_i2c2>; 209 status = "okay"; 210}; 211 212&i2c3 { 213 clock-frequency = <100000>; 214 pinctrl-names = "default"; 215 pinctrl-0 = <&pinctrl_i2c3>; 216 status = "okay"; 217 218 pmic@58 { 219 compatible = "dlg,da9063"; 220 reg = <0x58>; 221 pinctrl-names = "default"; 222 pinctrl-0 = <&pinctrl_pmic>; 223 interrupt-parent = <&gpio7>; 224 interrupts = <13 IRQ_TYPE_LEVEL_LOW>; 225 226 onkey { 227 compatible = "dlg,da9063-onkey"; 228 }; 229 230 regulators { 231 vdd_bcore1: bcore1 { 232 regulator-min-microvolt = <1420000>; 233 regulator-max-microvolt = <1420000>; 234 regulator-always-on; 235 regulator-boot-on; 236 }; 237 238 vdd_bcore2: bcore2 { 239 regulator-min-microvolt = <1420000>; 240 regulator-max-microvolt = <1420000>; 241 regulator-always-on; 242 regulator-boot-on; 243 }; 244 245 vdd_bpro: bpro { 246 regulator-min-microvolt = <1500000>; 247 regulator-max-microvolt = <1500000>; 248 regulator-always-on; 249 regulator-boot-on; 250 }; 251 252 vdd_bmem: bmem { 253 regulator-min-microvolt = <1800000>; 254 regulator-max-microvolt = <1800000>; 255 regulator-always-on; 256 regulator-boot-on; 257 }; 258 259 vdd_bio: bio { 260 regulator-min-microvolt = <1800000>; 261 regulator-max-microvolt = <1800000>; 262 regulator-always-on; 263 regulator-boot-on; 264 }; 265 266 vdd_bperi: bperi { 267 regulator-min-microvolt = <3300000>; 268 regulator-max-microvolt = <3300000>; 269 regulator-always-on; 270 regulator-boot-on; 271 }; 272 273 vdd_ldo1: ldo1 { 274 regulator-min-microvolt = <600000>; 275 regulator-max-microvolt = <1860000>; 276 }; 277 278 vdd_ldo2: ldo2 { 279 regulator-min-microvolt = <600000>; 280 regulator-max-microvolt = <1860000>; 281 }; 282 283 vdd_ldo3: ldo3 { 284 regulator-min-microvolt = <900000>; 285 regulator-max-microvolt = <3440000>; 286 }; 287 288 vdd_ldo4: ldo4 { 289 regulator-min-microvolt = <900000>; 290 regulator-max-microvolt = <3440000>; 291 }; 292 293 vdd_ldo5: ldo5 { 294 regulator-min-microvolt = <900000>; 295 regulator-max-microvolt = <3600000>; 296 }; 297 298 vdd_ldo6: ldo6 { 299 regulator-min-microvolt = <900000>; 300 regulator-max-microvolt = <3600000>; 301 }; 302 303 vdd_ldo7: ldo7 { 304 regulator-min-microvolt = <900000>; 305 regulator-max-microvolt = <3600000>; 306 }; 307 308 vdd_ldo8: ldo8 { 309 regulator-min-microvolt = <900000>; 310 regulator-max-microvolt = <3600000>; 311 }; 312 313 vdd_ldo9: ldo9 { 314 regulator-min-microvolt = <950000>; 315 regulator-max-microvolt = <3600000>; 316 }; 317 318 vdd_ldo10: ldo10 { 319 regulator-min-microvolt = <900000>; 320 regulator-max-microvolt = <3600000>; 321 }; 322 323 vdd_ldo11: ldo11 { 324 regulator-min-microvolt = <900000>; 325 regulator-max-microvolt = <3600000>; 326 regulator-always-on; 327 regulator-boot-on; 328 }; 329 }; 330 }; 331 332 rtc@32 { 333 compatible = "epson,rx8010"; 334 pinctrl-names = "default"; 335 pinctrl-0 = <&pinctrl_rtc>; 336 reg = <0x32>; 337 interrupt-parent = <&gpio4>; 338 interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; 339 }; 340}; 341 342&pcie { 343 pinctrl-names = "default"; 344 pinctrl-0 = <&pinctrl_pcie>; 345 reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; 346 fsl,tx-swing-full = <103>; 347 fsl,tx-swing-low = <103>; 348 status = "okay"; 349}; 350 351&pwm1 { 352 #pwm-cells = <2>; 353 pinctrl-names = "default"; 354 pinctrl-0 = <&pinctrl_pwm1>; 355 status = "okay"; 356}; 357 358&pwm2 { 359 pinctrl-names = "default"; 360 pinctrl-0 = <&pinctrl_pwm2>; 361 status = "disabled"; 362}; 363 364&sata { 365 status = "okay"; 366}; 367 368&ssi1 { 369 status = "okay"; 370}; 371 372&uart3 { 373 pinctrl-names = "default"; 374 pinctrl-0 = <&pinctrl_uart3>; 375 uart-has-rtscts; 376 status = "okay"; 377}; 378 379&uart4 { 380 pinctrl-names = "default"; 381 pinctrl-0 = <&pinctrl_uart4>; 382 status = "okay"; 383}; 384 385&usbh1 { 386 pinctrl-names = "default"; 387 pinctrl-0 = <&pinctrl_usbhub>; 388 vbus-supply = <®_usb_h1_vbus>; 389 reset-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; 390 status = "okay"; 391}; 392 393&usbotg { 394 vbus-supply = <®_usb_otg_vbus>; 395 pinctrl-names = "default"; 396 pinctrl-0 = <&pinctrl_usbotg>; 397 disable-over-current; 398 status = "okay"; 399}; 400 401&usdhc2 { 402 pinctrl-names = "default"; 403 pinctrl-0 = <&pinctrl_usdhc2>; 404 cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; 405 no-1-8-v; 406 keep-power-in-suspend; 407 wakeup-source; 408 status = "okay"; 409}; 410 411&usdhc3 { 412 pinctrl-names = "default"; 413 pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>; 414 bus-width = <8>; 415 vmmc-supply = <&vdd_bperi>; 416 non-removable; 417 keep-power-in-suspend; 418 status = "okay"; 419}; 420 421&wdog1 { 422 pinctrl-names = "default"; 423 pinctrl-0 = <&pinctrl_wdog>; 424 fsl,ext-reset-output; 425}; 426 427&iomuxc { 428 pinctrl-names = "default"; 429 pinctrl-0 = <&pinctrl_hog>; 430 431 pinctrl_audmux: audmuxgrp { 432 fsl,pins = < 433 MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 434 MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 435 MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 436 MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 437 >; 438 }; 439 440 pinctrl_display: dispgrp { 441 fsl,pins = < 442 /* BLEN_OUT */ 443 MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 444 /* LVDS_PPEN_OUT */ 445 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 446 >; 447 }; 448 449 pinctrl_ecspi1: ecspi1grp { 450 fsl,pins = < 451 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 452 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 453 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 454 /* SPI1 CS */ 455 MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 456 >; 457 }; 458 459 pinctrl_ecspi5: ecspi5grp { 460 fsl,pins = < 461 MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b0b0 462 MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x1b0b0 463 MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x1b0b0 464 MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 465 >; 466 }; 467 468 pinctrl_enet: enetgrp { 469 fsl,pins = < 470 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 471 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 472 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 473 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 474 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 475 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 476 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 477 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 478 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 479 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 480 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 481 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 482 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 483 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 484 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 485 /* FEC Reset */ 486 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 487 /* AR8033 Interrupt */ 488 MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 489 >; 490 }; 491 492 pinctrl_hog: hoggrp { 493 fsl,pins = < 494 /* GPIO 0-7 */ 495 MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 496 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 497 MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 498 MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 499 MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 500 MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b0 501 MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 502 MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x1b0b0 503 /* SUS_S3_OUT to CPLD */ 504 MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 505 >; 506 }; 507 508 pinctrl_i2c1: i2c1grp { 509 fsl,pins = < 510 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 511 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 512 >; 513 }; 514 515 pinctrl_i2c2: i2c2grp { 516 fsl,pins = < 517 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 518 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 519 >; 520 }; 521 522 pinctrl_i2c3: i2c3grp { 523 fsl,pins = < 524 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 525 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 526 >; 527 }; 528 529 pinctrl_pcie: pciegrp { 530 fsl,pins = < 531 /* PCIe Reset */ 532 MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 533 /* PCIe Wake */ 534 MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 535 >; 536 }; 537 538 pinctrl_pmic: pmicgrp { 539 fsl,pins = < 540 /* PMIC Interrupt */ 541 MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 542 >; 543 }; 544 545 pinctrl_pwm1: pwm1grp { 546 fsl,pins = < 547 MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 548 >; 549 }; 550 551 pinctrl_pwm2: pwm2grp { 552 fsl,pins = < 553 MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 554 >; 555 }; 556 557 pinctrl_rtc: rtcgrp { 558 fsl,pins = < 559 /* RTC_INT */ 560 MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 561 >; 562 }; 563 564 pinctrl_uart3: uart3grp { 565 fsl,pins = < 566 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 567 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 568 MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 569 MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 570 >; 571 }; 572 573 pinctrl_uart4: uart4grp { 574 fsl,pins = < 575 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 576 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 577 >; 578 }; 579 580 pinctrl_usbhub: usbhubgrp { 581 fsl,pins = < 582 /* HUB_RESET */ 583 MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0 584 >; 585 }; 586 587 pinctrl_usbotg: usbotggrp { 588 fsl,pins = < 589 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 590 >; 591 }; 592 593 pinctrl_usbotg_vbus: usbotgvbusgrp { 594 fsl,pins = < 595 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0 596 >; 597 }; 598 599 pinctrl_usdhc2: usdhc2grp { 600 fsl,pins = < 601 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 602 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 603 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 604 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 605 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 606 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 607 /* uSDHC2 CD */ 608 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 609 >; 610 }; 611 612 pinctrl_usdhc3: usdhc3grp { 613 fsl,pins = < 614 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 615 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 616 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 617 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 618 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 619 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 620 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 621 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 622 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 623 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 624 >; 625 }; 626 627 pinctrl_usdhc3_reset: usdhc3grp-reset { 628 fsl,pins = < 629 MX6QDL_PAD_SD3_RST__SD3_RESET 0x170F9 630 >; 631 }; 632 633 pinctrl_usdhc4: usdhc4grp { 634 fsl,pins = < 635 MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 636 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059 637 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 638 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 639 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 640 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 641 MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 642 MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 643 MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 644 MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 645 /* uSDHC4 CD */ 646 MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0 647 /* uSDHC4 SDIO PWR */ 648 MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 649 /* uSDHC4 SDIO WP */ 650 MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 651 /* uSDHC4 SDIO LED */ 652 MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 653 >; 654 }; 655 656 pinctrl_wdog: wdoggrp { 657 fsl,pins = < 658 MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0 659 >; 660 }; 661}; 662