1// SPDX-License-Identifier: ISC
2/*
3 * Device Tree file for Intel XScale Network Processors
4 * in the IXP 4xx series.
5 */
6#include <dt-bindings/interrupt-controller/irq.h>
7#include <dt-bindings/gpio/gpio.h>
8
9/ {
10	soc {
11		#address-cells = <1>;
12		#size-cells = <1>;
13		ranges;
14		compatible = "simple-bus";
15		interrupt-parent = <&intcon>;
16
17		/*
18		 * The IXP4xx expansion bus is a set of up to 7 each up to 16MB
19		 * windows in the 256MB space from 0x50000000 to 0x5fffffff.
20		 */
21		bus@c4000000 {
22			/* compatible and reg filled in by per-soc device tree */
23			native-endian;
24			#address-cells = <2>;
25			#size-cells = <1>;
26			ranges = <0 0x0 0x50000000 0x01000000>,
27				 <1 0x0 0x51000000 0x01000000>,
28				 <2 0x0 0x52000000 0x01000000>,
29				 <3 0x0 0x53000000 0x01000000>,
30				 <4 0x0 0x54000000 0x01000000>,
31				 <5 0x0 0x55000000 0x01000000>,
32				 <6 0x0 0x56000000 0x01000000>,
33				 <7 0x0 0x57000000 0x01000000>;
34			dma-ranges = <0 0x0 0x50000000 0x01000000>,
35				 <1 0x0 0x51000000 0x01000000>,
36				 <2 0x0 0x52000000 0x01000000>,
37				 <3 0x0 0x53000000 0x01000000>,
38				 <4 0x0 0x54000000 0x01000000>,
39				 <5 0x0 0x55000000 0x01000000>,
40				 <6 0x0 0x56000000 0x01000000>,
41				 <7 0x0 0x57000000 0x01000000>;
42		};
43
44		qmgr: queue-manager@60000000 {
45			compatible = "intel,ixp4xx-ahb-queue-manager";
46			reg = <0x60000000 0x4000>;
47			interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>;
48		};
49
50		pci@c0000000 {
51			/* compatible filled in by per-soc device tree */
52			reg = <0xc0000000 0x1000>;
53			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
54				     <9 IRQ_TYPE_LEVEL_HIGH>,
55				     <10 IRQ_TYPE_LEVEL_HIGH>;
56			#address-cells = <3>;
57			#size-cells = <2>;
58			device_type = "pci";
59			bus-range = <0x00 0xff>;
60			status = "disabled";
61
62			ranges =
63			/*
64			 * 64MB 32bit non-prefetchable memory 0x48000000-0x4bffffff
65			 * done in 4 chunks of 16MB each.
66			 */
67			<0x02000000 0 0x48000000 0x48000000 0 0x04000000>,
68			/* 64KB I/O space at 0x4c000000 */
69			<0x01000000 0 0x00000000 0x4c000000 0 0x00010000>;
70
71			/*
72			 * This needs to map to the start of physical memory so
73			 * PCI devices can see all (hopefully) memory. This is done
74			 * using 4 1:1 16MB windows, so the RAM should not be more than
75			 * 64 MB for this to work. If your memory is anywhere else
76			 * than at 0x0 you need to alter this.
77			 */
78			dma-ranges =
79			<0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
80
81			/* Each unique DTS using PCI must specify the swizzling */
82		};
83
84		uart0: serial@c8000000 {
85			compatible = "intel,xscale-uart";
86			reg = <0xc8000000 0x1000>;
87			/*
88			 * The reg-offset and reg-shift is a side effect
89			 * of running the platform in big endian mode.
90			 */
91			reg-offset = <3>;
92			reg-shift = <2>;
93			interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
94			clock-frequency = <14745600>;
95			no-loopback-test;
96		};
97
98		uart1: serial@c8001000 {
99			compatible = "intel,xscale-uart";
100			reg = <0xc8001000 0x1000>;
101			/*
102			 * The reg-offset and reg-shift is a side effect
103			 * of running the platform in big endian mode.
104			 */
105			reg-offset = <3>;
106			reg-shift = <2>;
107			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
108			clock-frequency = <14745600>;
109			no-loopback-test;
110		};
111
112		gpio0: gpio@c8004000 {
113			compatible = "intel,ixp4xx-gpio";
114			reg = <0xc8004000 0x1000>;
115			gpio-controller;
116			#gpio-cells = <2>;
117			interrupt-controller;
118			#interrupt-cells = <2>;
119		};
120
121		intcon: interrupt-controller@c8003000 {
122			/*
123			 * Note: no compatible string. The subvariant of the
124			 * chip needs to define what version it is. The
125			 * location of the interrupt controller is fixed in
126			 * memory across all variants.
127			 */
128			reg = <0xc8003000 0x100>;
129			interrupt-controller;
130			#interrupt-cells = <2>;
131		};
132
133		timer@c8005000 {
134			compatible = "intel,ixp4xx-timer";
135			reg = <0xc8005000 0x100>;
136			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
137		};
138
139		npe: npe@c8006000 {
140			compatible = "intel,ixp4xx-network-processing-engine";
141			reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
142
143			/* NPE-C contains a crypto accelerator */
144			crypto {
145				compatible = "intel,ixp4xx-crypto";
146				intel,npe-handle = <&npe 2>;
147				queue-rx = <&qmgr 30>;
148				queue-txready = <&qmgr 29>;
149			};
150		};
151
152		/* This is known as EthB */
153		ethernet@c8009000 {
154			compatible = "intel,ixp4xx-ethernet";
155			reg = <0xc8009000 0x1000>;
156			status = "disabled";
157			/* Dummy values that depend on firmware */
158			queue-rx = <&qmgr 3>;
159			queue-txready = <&qmgr 20>;
160			intel,npe-handle = <&npe 1>;
161		};
162
163		/* This is known as EthC */
164		ethernet@c800a000 {
165			compatible = "intel,ixp4xx-ethernet";
166			reg = <0xc800a000 0x1000>;
167			status = "disabled";
168			/* Dummy values that depend on firmware */
169			queue-rx = <&qmgr 0>;
170			queue-txready = <&qmgr 0>;
171			intel,npe-handle = <&npe 2>;
172		};
173
174		/* This is known as EthA */
175		ethernet@c800c000 {
176			compatible = "intel,ixp4xx-ethernet";
177			reg = <0xc800c000 0x1000>;
178			status = "disabled";
179			intel,npe = <0>;
180			/* Dummy values that depend on firmware */
181			queue-rx = <&qmgr 0>;
182			queue-txready = <&qmgr 0>;
183		};
184	};
185};
186