1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * linux/drivers/clocksource/acpi_pm.c
4 *
5 * This file contains the ACPI PM based clocksource.
6 *
7 * This code was largely moved from the i386 timer_pm.c file
8 * which was (C) Dominik Brodowski <linux@brodo.de> 2003
9 * and contained the following comments:
10 *
11 * Driver to use the Power Management Timer (PMTMR) available in some
12 * southbridges as primary timing source for the Linux kernel.
13 *
14 * Based on parts of linux/drivers/acpi/hardware/hwtimer.c, timer_pit.c,
15 * timer_hpet.c, and on Arjan van de Ven's implementation for 2.4.
16 */
17
18 #include <linux/acpi_pmtmr.h>
19 #include <linux/clocksource.h>
20 #include <linux/timex.h>
21 #include <linux/errno.h>
22 #include <linux/init.h>
23 #include <linux/pci.h>
24 #include <linux/delay.h>
25 #include <asm/io.h>
26
27 /*
28 * The I/O port the PMTMR resides at.
29 * The location is detected during setup_arch(),
30 * in arch/i386/kernel/acpi/boot.c
31 */
32 u32 pmtmr_ioport __read_mostly;
33
read_pmtmr(void)34 static inline u32 read_pmtmr(void)
35 {
36 /* mask the output to 24 bits */
37 return inl(pmtmr_ioport) & ACPI_PM_MASK;
38 }
39
acpi_pm_read_verified(void)40 u32 acpi_pm_read_verified(void)
41 {
42 u32 v1 = 0, v2 = 0, v3 = 0;
43
44 /*
45 * It has been reported that because of various broken
46 * chipsets (ICH4, PIIX4 and PIIX4E) where the ACPI PM clock
47 * source is not latched, you must read it multiple
48 * times to ensure a safe value is read:
49 */
50 do {
51 v1 = read_pmtmr();
52 v2 = read_pmtmr();
53 v3 = read_pmtmr();
54 } while (unlikely((v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1)
55 || (v3 > v1 && v3 < v2)));
56
57 return v2;
58 }
59
acpi_pm_read(struct clocksource * cs)60 static u64 acpi_pm_read(struct clocksource *cs)
61 {
62 return (u64)read_pmtmr();
63 }
64
65 static struct clocksource clocksource_acpi_pm = {
66 .name = "acpi_pm",
67 .rating = 200,
68 .read = acpi_pm_read,
69 .mask = (u64)ACPI_PM_MASK,
70 .flags = CLOCK_SOURCE_IS_CONTINUOUS,
71 };
72
73
74 #ifdef CONFIG_PCI
75 static int acpi_pm_good;
acpi_pm_good_setup(char * __str)76 static int __init acpi_pm_good_setup(char *__str)
77 {
78 acpi_pm_good = 1;
79 return 1;
80 }
81 __setup("acpi_pm_good", acpi_pm_good_setup);
82
acpi_pm_read_slow(struct clocksource * cs)83 static u64 acpi_pm_read_slow(struct clocksource *cs)
84 {
85 return (u64)acpi_pm_read_verified();
86 }
87
acpi_pm_need_workaround(void)88 static inline void acpi_pm_need_workaround(void)
89 {
90 clocksource_acpi_pm.read = acpi_pm_read_slow;
91 clocksource_acpi_pm.rating = 120;
92 }
93
94 /*
95 * PIIX4 Errata:
96 *
97 * The power management timer may return improper results when read.
98 * Although the timer value settles properly after incrementing,
99 * while incrementing there is a 3 ns window every 69.8 ns where the
100 * timer value is indeterminate (a 4.2% chance that the data will be
101 * incorrect when read). As a result, the ACPI free running count up
102 * timer specification is violated due to erroneous reads.
103 */
acpi_pm_check_blacklist(struct pci_dev * dev)104 static void acpi_pm_check_blacklist(struct pci_dev *dev)
105 {
106 if (acpi_pm_good)
107 return;
108
109 /* the bug has been fixed in PIIX4M */
110 if (dev->revision < 3) {
111 pr_warn("* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,\n"
112 "* this clock source is slow. Consider trying other clock sources\n");
113
114 acpi_pm_need_workaround();
115 }
116 }
117 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3,
118 acpi_pm_check_blacklist);
119
acpi_pm_check_graylist(struct pci_dev * dev)120 static void acpi_pm_check_graylist(struct pci_dev *dev)
121 {
122 if (acpi_pm_good)
123 return;
124
125 pr_warn("* The chipset may have PM-Timer Bug. Due to workarounds for a bug,\n"
126 "* this clock source is slow. If you are sure your timer does not have\n"
127 "* this bug, please use \"acpi_pm_good\" to disable the workaround\n");
128
129 acpi_pm_need_workaround();
130 }
131 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0,
132 acpi_pm_check_graylist);
133 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_LE,
134 acpi_pm_check_graylist);
135 #endif
136
137 #ifndef CONFIG_X86_64
138 #include <asm/mach_timer.h>
139 #define PMTMR_EXPECTED_RATE \
140 ((CALIBRATE_LATCH * (PMTMR_TICKS_PER_SEC >> 10)) / (PIT_TICK_RATE>>10))
141 /*
142 * Some boards have the PMTMR running way too fast. We check
143 * the PMTMR rate against PIT channel 2 to catch these cases.
144 */
verify_pmtmr_rate(void)145 static int verify_pmtmr_rate(void)
146 {
147 u64 value1, value2;
148 unsigned long count, delta;
149
150 mach_prepare_counter();
151 value1 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
152 mach_countup(&count);
153 value2 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
154 delta = (value2 - value1) & ACPI_PM_MASK;
155
156 /* Check that the PMTMR delta is within 5% of what we expect */
157 if (delta < (PMTMR_EXPECTED_RATE * 19) / 20 ||
158 delta > (PMTMR_EXPECTED_RATE * 21) / 20) {
159 pr_info("PM-Timer running at invalid rate: %lu%% of normal - aborting.\n",
160 100UL * delta / PMTMR_EXPECTED_RATE);
161 return -1;
162 }
163
164 return 0;
165 }
166 #else
167 #define verify_pmtmr_rate() (0)
168 #endif
169
170 /* Number of monotonicity checks to perform during initialization */
171 #define ACPI_PM_MONOTONICITY_CHECKS 10
172 /* Number of reads we try to get two different values */
173 #define ACPI_PM_READ_CHECKS 10000
174
init_acpi_pm_clocksource(void)175 static int __init init_acpi_pm_clocksource(void)
176 {
177 u64 value1, value2;
178 unsigned int i, j = 0;
179
180 if (!pmtmr_ioport)
181 return -ENODEV;
182
183 /* "verify" this timing source: */
184 for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) {
185 udelay(100 * j);
186 value1 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
187 for (i = 0; i < ACPI_PM_READ_CHECKS; i++) {
188 value2 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
189 if (value2 == value1)
190 continue;
191 if (value2 > value1)
192 break;
193 if ((value2 < value1) && ((value2) < 0xFFF))
194 break;
195 pr_info("PM-Timer had inconsistent results: %#llx, %#llx - aborting.\n",
196 value1, value2);
197 pmtmr_ioport = 0;
198 return -EINVAL;
199 }
200 if (i == ACPI_PM_READ_CHECKS) {
201 pr_info("PM-Timer failed consistency check (%#llx) - aborting.\n",
202 value1);
203 pmtmr_ioport = 0;
204 return -ENODEV;
205 }
206 }
207
208 if (verify_pmtmr_rate() != 0){
209 pmtmr_ioport = 0;
210 return -ENODEV;
211 }
212
213 return clocksource_register_hz(&clocksource_acpi_pm,
214 PMTMR_TICKS_PER_SEC);
215 }
216
217 /* We use fs_initcall because we want the PCI fixups to have run
218 * but we still need to load before device_initcall
219 */
220 fs_initcall(init_acpi_pm_clocksource);
221
222 /*
223 * Allow an override of the IOPort. Stupid BIOSes do not tell us about
224 * the PMTimer, but we might know where it is.
225 */
parse_pmtmr(char * arg)226 static int __init parse_pmtmr(char *arg)
227 {
228 unsigned int base;
229 int ret;
230
231 ret = kstrtouint(arg, 16, &base);
232 if (ret)
233 return ret;
234
235 pr_info("PMTMR IOPort override: 0x%04x -> 0x%04x\n", pmtmr_ioport,
236 base);
237 pmtmr_ioport = base;
238
239 return 1;
240 }
241 __setup("pmtmr=", parse_pmtmr);
242