1// SPDX-License-Identifier: GPL-2.0+ OR X11
2/*
3 * P1020 Silicon/SoC Device Tree Source (post include)
4 *
5 * Copyright 2013 Freescale Semiconductor Inc.
6 * Copyright 2019 NXP
7 */
8
9&soc {
10	#address-cells = <1>;
11	#size-cells = <1>;
12	device_type = "soc";
13	compatible = "fsl,p1020-immr", "simple-bus";
14	bus-frequency = <0x0>;
15
16	usb@22000 {
17		compatible = "fsl-usb2-dr";
18		reg = <0x22000 0x1000>;
19		phy_type = "ulpi";
20	};
21
22	usb@23000 {
23		compatible = "fsl-usb2-dr";
24		reg = <0x23000 0x1000>;
25		phy_type = "ulpi";
26	};
27
28	mpic: pic@40000 {
29		interrupt-controller;
30		#address-cells = <0>;
31		#interrupt-cells = <4>;
32		reg = <0x40000 0x40000>;
33		compatible = "fsl,mpic";
34		device_type = "open-pic";
35		big-endian;
36		single-cpu-affinity;
37		last-interrupt-source = <255>;
38	};
39
40	esdhc: esdhc@2e000 {
41		compatible = "fsl,esdhc";
42		reg = <0x2e000 0x1000>;
43		/* Filled in by U-Boot */
44		clock-frequency = <0>;
45	};
46
47	espi0: spi@7000 {
48		compatible = "fsl,mpc8536-espi";
49		#address-cells = <1>;
50		#size-cells = <0>;
51		reg = <0x7000 0x1000>;
52		fsl,espi-num-chipselects = <4>;
53		status = "disabled";
54	};
55
56/include/ "pq3-i2c-0.dtsi"
57/include/ "pq3-i2c-1.dtsi"
58
59/include/ "pq3-etsec2-0.dtsi"
60	enet0: enet0_grp2: ethernet@b0000 {
61	};
62
63/include/ "pq3-etsec2-1.dtsi"
64	enet1: enet1_grp2: ethernet@b1000 {
65	};
66
67/include/ "pq3-etsec2-2.dtsi"
68	enet2: enet2_grp2: ethernet@b2000 {
69	};
70};
71
72/include/ "pq3-etsec2-grp2-0.dtsi"
73/include/ "pq3-etsec2-grp2-1.dtsi"
74/include/ "pq3-etsec2-grp2-2.dtsi"
75
76/* PCIe controller base address 0x9000 */
77&pci1 {
78	compatible = "fsl,pcie-p1_p2", "fsl,pcie-fsl-qoriq";
79	law_trgt_if = <1>;
80	#address-cells = <3>;
81	#size-cells = <2>;
82	device_type = "pci";
83	bus-range = <0x0 0xff>;
84};
85
86/* PCIe controller base address 0xa000 */
87&pci0 {
88	compatible = "fsl,pcie-p1_p2", "fsl,pcie-fsl-qoriq";
89	law_trgt_if = <2>;
90	#address-cells = <3>;
91	#size-cells = <2>;
92	device_type = "pci";
93	bus-range = <0x0 0xff>;
94};
95